cover
Contact Name
-
Contact Email
-
Phone
-
Journal Mail Official
majalahkkp@yahoo.co.id
Editorial Address
Balai Besar Kulit, Karet dan Plastik Jl. Sokonandi No. 9 Yogyakarta 55166
Location
Kota adm. jakarta selatan,
Dki jakarta
INDONESIA
Majalah Kulit, Karet, dan Plastik
ISSN : 18296971     EISSN : 24604461     DOI : 10.20543
Core Subject : Engineering,
Majalah Kulit, Karet, dan Plastik (Journal of Leather, Rubber, and Plastics) publishes original research focused on materials, processes, and waste management in the field of leather, rubber, and plastics.
Articles 781 Documents
Penelitian pembuatan kompon tegel karet dengan menggunakan paraffinic oil pertamina sebagai plasticizer Arum Yuniari
Majalah Kulit, Karet, dan Plastik Vol 9, No 18 (1994): Majalah Barang Kulit, Karet, dan Plastik
Publisher : Center for Leather, Rubber, and Plastic Ministry of Industry, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (838.681 KB) | DOI: 10.20543/mkkp.v9i18.425

Abstract

The objective of the research is to find out the maximum quantity of paraffinic oil as plasticizer  which can be added to rubber tile compound which fulfills the requirement of SNI 1550-89-A, “Tegel Karet”. The compound is made  by applying  RSS, SBR 1502, Paraffinic oil, Stearic Acid, ZnO, PBN, Aluminium Silicate, Chine  Clay, CaCO3, pigment, MBT and sulfur, then compounded by two  roll mill machine. Compound is moulded into slab forms using hydraulic press machine based on the time and temperature obtained from the curometer divice, pressure 150 kg/cm2. The slab is tested  its  physical properties including hardness, compression set and also observed organoleptically. Test result which fulfill the requerement of SNI 1550-89-A : “Tegel Karet” are a compound applying Paraffinic 90 type 2 and 3, 7,5 Parts. ABSTRAKPenelitian ini bertujuan untuk mengetahui jumlah maksimum Paraffinic oil yang dapat ditambahkan dalam pembuatan kompon Tegel Karet yang memenuhi persyaratan SNI 1550-89-A “Tegel Karet”. Pembuatan kompon menggunakan RSS, SBR 1502. Paraffinic oil, asam stearat, ZnO, PBN, Aluminium Silikat, China Clay, CaCO3, Zat Warna , MBT, sulfur, Aluminium Silikat, China Clay, dikomponding, dengan menggunakan mesin two roll mill. Kompon cetak, tekanan 150 kg/cm2. Kompon diuji  kekerasan  dan pampatan tetap dan diamati secara organoleptis. Dari hasil penelitian kompon tegel karet yang menggunakan Paraffinic oil tipe 2 dan 3 dengan jumlah 7,5 bagian dapat memenuhi persyaratan SNI 1550-89-A, “Tegel Karet”. 
Tanah untuk sanitasi lingkungan terhadap limbah cair industri Susilowati Susilowati
Majalah Kulit, Karet, dan Plastik Vol 12, No 22 (1996): Majalah Barang Kulit, Karet, dan Plastik
Publisher : Center for Leather, Rubber, and Plastic Ministry of Industry, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1684.946 KB) | DOI: 10.20543/mkkp.v12i22.342

Abstract

Industrial waste management, especially industrial waste water usually is carried out using a high mechanical system, which is need a relative expensive cost. This is not adjustable for small and medium scale industry. The industrial waste, especially industrial waste water is a potential element for environmental degradation. Actually some of specific matter on industrial waste water is possible to use for agriculture to increase the essential soils matter and can improve the physical and chemical soils fertility as a cheap fertilizer. The main matter and the form process of the soils give a special character and varienty. This character influences the physical and chemical quality of soils. With the presence of this character and quality, soils have three functions : as a filter, as a buffer and as a system changer. Based on the soils charactistic  and quality, soils can be useful for environmental sanitation of industrial waste water. Soils can be used another efficient alternative for waste water industrial management, especially for small and medium scale industry.   ABSTRAK  Pengelolaan limbah industri, terutama limbah cair biasanya dilakukan dengan sistem mekanis tinggi yang membutuhkan biaya relatif mahal. Kenyataan ini mengakibatkan industry kecil dan skala menengah tidak mungkin melaksanakannya. Limbah industry, utamanya limbah cair industri merupakan usnur potensial bagi ancaman kelestarian kemampuan lingkungan. Namun sebetulnya unsur-unsur tertentu dalam limbah cair tersebut punya kemungkinan untuk dimanfaatkan oleh sector pertanian, yaitu dapat menambah kandungan nilai hara dalam tanah. Berarti bermanfaat sebagai bahan untuk perbaikan kesuburan fisika dan kimiawi tanah, dengan demikian berfungsi sebagai cara pemupukan yang murah. Sifat dan jenis tanah sangat ditentukan oleh batuan induk dan proses pembentukan tanah itu sendiri. Keadaan ini akan berpengaruh terhadap sifat-sifat fisika dan kimiawi tanah. 
Penelitian pengaruh variasi China clay dan napthenoc oil terhadap kekerasan dan ketahanan sobek kompon karet untuk lis pintu almari es Sri Brataningsih Puji Lestari; Luciawati Sunaryo
Majalah Kulit, Karet, dan Plastik Vol 10, No 20 (1995): Majalah Barang Kulit, Karet, dan Plastik
Publisher : Center for Leather, Rubber, and Plastic Ministry of Industry, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (961.058 KB) | DOI: 10.20543/mkkp.v10i20.444

Abstract

The aim of this research is to know influence of naphthenic oil and filler china clay to the physical properties of hardness and tear resistant rubber compound for refrigerator gasket. It makes from natural rubber (pale crepe) and synthetic rubber (SBR 1502) as material with addition ingredients are china clay, stearic, guanidine, naphthenic oil, paraffin wax, coumarone resin, zink okside, stearic acid, guanidine, sulfonamide, ASOP, titan diokside, brown factice and sulphur. Rubber compound for refrigerator gasket, formed to slab by hydraulic press at 150C and 150 kg/cm2. Than tasted hardness and tear resistant. The result of this research indicated naphthenic oil and filler china clay variation are high significant to hardness and tear resistant properties of rubber compound for refrigerator gasket. INTISARI               Penelitian ini bertujuan untuk mengetahui pengaruh variasi naphthenic oil bahan pengisi china clay terhadap sifat fisis kekerasan dan ketahanan sobek kompon karet untuk lis pintu almari es. Kompon karet untuk pintu almari es dibuat dari bahan baku karet alam ( pale crepe ) dan karet sintetis (SBR 1502) ditambah dengan ingredient- ingredient antara lain filler china clay, calcium carbonat, naphthenic oil, paraffin wax, coumarone resin, zink okside, asam stearate, guanidine, sulfonamide, ASOP, titan diokside, brown factice dan sulfur. Kompon karet lis pintu almari es dibuat menjadi bentuk slab dengan alat hydraulic press pada suhu 150C dan tekanan 150 kg/cm2. Kompon yang didapat diuji sifat fisi kekerasan dan ketahanan sobeknya. Hasil penelitian menunjukkan bahwa variasi naphthenic dan bahan pengisi china clay berpengaruh nyata terhadap sifat kekrasan dan ketahanan sobek kompon karet untuk lis pintu almari es.
Pengaruh penggunaan karbon hitam bervariasi terhadap sifat fisika sol karet sepatu kanvas untuk umum Hadi Musthofa; TC Bambang Supriyono
Majalah Kulit, Karet, dan Plastik Vol 12, No 23 (1997): Majalah Barang Kulit, Karet, dan Plastik
Publisher : Center for Leather, Rubber, and Plastic Ministry of Industry, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (818.694 KB) | DOI: 10.20543/mkkp.v12i23.360

Abstract

The objective of this research is to know the influence carbon black to the physical properties rubber sol of canvas shoes for general. Vulcanized rubber makes from rubber smoked sheet as row material naphthenic oil, ZnO, stearic acid, carbon black, AoSP, MBT, MBTS, TMT and sulphur. Raw material rubber and ingredient were compounded in two roll mill and formed to slab by hydraulic press at temperatur 1500 C and pressure 150 kg/cm2. The result of this research indicated that unsignificant different of treatment. INTISARI Penelitian ini bertujuan untuk mengetahui pengaruh karbon hitam terhadap sifat fisika sol karet sepatu kanvas untuk umum. Vulkanisat karet dibuat dari bahan BAKU Rubber smoked sheet ditambah bahan-bahan berupa naphthemic oil, ZnO, Asam stearat karbon hitam, AOSP, MBT, MBTS, TMT, dan sulfur. Bahan-bahan tersebut diatas di komponiding pada sebuah alat two roll. Kompon yang dihasilkan dibuat menjadi bentuk lembaran dengan menggunakan hidroulic press pada suhu 1500 C dan tekanan 150 kg/cm2.  Hasil analisa statistik menunjukkan bahwa tidak adanya perbedaan perlakuan.
Pengaruh variasi pemakaian garam dan sellatan p terhadap penyerapan glutaraldehid didalam kulit Syakir Hasyimi; Heru Budi Susanto
Majalah Kulit, Karet, dan Plastik Vol 12, No 24 (1997): Majalah Barang Kulit, Karet, dan Plastik
Publisher : Center for Leather, Rubber, and Plastic Ministry of Industry, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (611.704 KB) | DOI: 10.20543/mkkp.v12i24.365

Abstract

Wet white tanning system, the opposite of wet blue at chrome tannage, used glutraldehyde as tanning agent that relatively does not cause potential hazardous waste. Sellatan P pickling system is prior the tannage, a kind of polysylphonic acids which has no swelling effect to the pelt even thought without any salt addition during pickling. Pickling as conditioning pelt to tanning process has important role to facilitating tanning agent get through pelt. It has not much known the effect of salt addition in the Sellatan pickling process to level of tanning material absorbency. For those purpose it was used salt preserved cow hide as object and by varying the salt addition and Selatan P respectively, 40%, 60%, 80% (percentage to the normal salt usage at usual pickling) and 1%, 2%, 3%. Factorial design experiment are used in order to analyze the data. From the statistical analysis indicate that salt has no significant effects to the level of glutaraldehyde absorbency, but do the Sellatan P. there is strong interaction of Sellatan P and salt to the level of glutaraldehyde absorbency in the pelt. INTISARI Penyamakan kulit system “wet white” adalah penyamakan dengan menggunakan bahan samak glutaraldehid. Berbeda dengan penyamakan krom yang menghasilkan kulit “wet blue” penyamakan dengan bahan samak glutaraldehid tidak menghasilkan limbah berbahaya. Proses penyamakan system wet white didahului dengan proses pengasaman dengan menggunakan bahan pengasam Sellatan P yaitu modifikasi asam polisulfonat yang tidak membengkakkan kulit walau tanpa penambahan garam. Proses pengasaman merupakan tahapan penyiapan kondisi kulit untuk member kemudahan bahan samak masuk ke dalam kulit sewaktu penyamakan. Penambahan garam pada proses pengasaman dengan Sellatan P ini belum diketahui pengaruhnya terhadap tingkap penyerapan bahan samak pada kulit. Untuk itu dilakukan penelitian dengan menggunakan kulit sapi awet garaman sebagai obyek dan dengan melakukan variasi pemakaian Sellatan P sebesar 1%, 2%, 3% serta variasi pemakaian garam sebesar 40%, 60%, 80% (persentase terhadap pemakaian garam pada cara pengasaman biasa). Untuk mengetahui pengaruh tersebut digunakan disain percobaan factorial. Analisa statistic mendapatkan bahwa garam tidak berpengaruh terhadap tingkat penyerapan kulit terhadap glutaraldehid sebaliknya dengan Sellatan P. Terdapat interaksi kuat antara Sellatan P dengan garam terhadap tingkap penyerapan glutaraldehid. 
Pembuatan kulit untuk label Ignatius Sunaryo; Sri Waskito; Syakir Hasyimi; Kasmin Nainggolan
Majalah Kulit, Karet, dan Plastik Vol 17, No 1-2 (2001): Majalah Barang Kulit, Karet, dan Plastik
Publisher : Center for Leather, Rubber, and Plastic Ministry of Industry, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (2200.767 KB) | DOI: 10.20543/mkkp.v17i1-2.253

Abstract

This research is aimed to produce leather for label which is needed by market demand ant to disseminate this technology to industries. There were 10 sides of wet salted cow hides for this research. Those hides were divided into 3 groups, each group consisted of 3 sides that were serially tanned by 3%, 4% and 5% and one side for control. Those hides were then mixed and divided into 3 groups, each group consisted of 3 sides and were then tanned by 6%, 8% and 10% of mimosa. The rest one side was tanned by 6% chrome and 8% mimosa for control. One side of label leather was taken from market used for comparison. Organoleptical, physical and chemical leather testing were carried out in IRDLAI laboratory. The result showed that the quality of the label leather from this research were better than label leather from market. Beside this it could be found out the technology of label manufacture which could produce good quality of label leather that were tanned by 5% chrome and re-tanned by 8% of mimosa INTISARI Penelitian pembuatan kulit untuk label ini bertujuan untuk mendapatkan kulit label yang kwalitasnya sesuai dengan pangsa pasar, dan juga untuk menyebar luaskan teknologi ini ke masyarakat. Untuk penelitian ini digunakan kulit sapi awet garam sebanyak 10 lembar tengahan yang dibagi ke dalam 3 kelompok masing-masing ada 3 lembar tengahan yang disamak krom 3%, 4% dan 5%. Sesudah itu kulit diacak lagi dan dibagi dalam 3 kelompok dan setiap kelompok kulit disamak dengan mimosa 6%, 8% dan 10%. Sisanya 1 lembar tengahan disamak dengan krom 6% dan mimosa 8% untuk kontrol. Ada satu lembar tengahan kulit label diambil dari pasar sebagai tolok ukur. Pengujian secara organoleptis, fisis dan khemis di lakukan di BBKKP. Hasil penelitian menunjukkan bahwa kulit label hasil penelitian mempunyai kwalitas lebih baik dibanding kulit label yang diambil dari pasar. Di samping itu dapat diperoleh cara pembuatan kulit label dengan hasil yang baik yakni kulit label yang disamak 5% krom dan mimosa 8%. 
Kinetika vulkanisasi dan sifat mekanis komposit acrylonitrile butadiene rubber (NBR) Arum Yuniari; Ike Setyorini; Hesty Eka Mayasari
Majalah Kulit, Karet, dan Plastik Vol 32, No 2 (2016): Majalah Kulit, Karet, dan Plastik
Publisher : Center for Leather, Rubber, and Plastic Ministry of Industry, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (97.776 KB) | DOI: 10.20543/mkkp.v32i2.1594

Abstract

The aim of this research was to study the effect of vulcanization temperature on mechanical properties and curing kinetics of NBR composites. The composites were formulated by using two types of carbon black i.e. N-330 and N-774. The curing kinetics was determined using Moving Die Rheometer. The network formation processes were related to torque and time. The vulcanizates were obtained by compression molding in a hydraulic press at 150°C and 160°C. The mechanical properties observed include tensile strength, elongation at break, hardness, and tear strength. Kinetics studies were approached by Arrhenius equation and the reaction mechanism was assumed following first order reaction. The results showed that curing kinetics can be approached by the equation from the rheometer data. The surface area of carbon black strongly influenced the mechanical properties and rate constant (k) of NBR composite. Carbon black N-330 can be used as a desirable reinforcing filler which gave a higher mechanical properties than the other type of carbon black.Keywords: curing kinetics, NBR, temperature, mechanics.
Rancang bantun industri kecil suku cadang / komponen kulit teknis untuk industri tekstil Suliestiyah Wiryodiningrat; Dwi Asdono Basuki
Majalah Kulit, Karet, dan Plastik Vol 10, No 19 (1995): Majalah Barang Kulit, Karet, dan Plastik
Publisher : Center for Leather, Rubber, and Plastic Ministry of Industry, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1062.752 KB) | DOI: 10.20543/mkkp.v10i19.431

Abstract

The objective of this research is to find out proses of production and relation between cost, Selling price anda break even point (BEP). Product specification is space parts for Textile industries i.e.Picker, Buffer, Bumper leather, Sweel leather, Box front leather, Stick Bumper and Tension brake leather. The production capacity is 700 units per-day, so that in one year is 210.000 units. The economical analysis showed that Total Captal (fixed capital and working capital) =Rp. 149.189.750.00. Total production cost per-year (fixed cost and variable cost) Rp. 364.939.375.00. The manufacturing cost = Rp. 12.165 for 7 spareparts. Profit calculation before taxing = Rp. 57.310.625.00 and after taxing Rp. 45.848.500.00. Percentage of the pay out periode calculation of profit to return the capital (rate of return). Before taxing is 38.40%, after 30.73%. equal with 2 years 6 months (before taxing) and after taxing is 3 years. The break even point calculation = Rp. 207.347.274,00 (49,10%) and the capacity is 14.732 units.    INTISARI Penelitian ini bertujuan untuk mengetahui proses produksi dan hubungan antara biaya, harga jual serta perhitungan rugi-laba. Spesifikasi produk suku cadang industry tekstil, yaitu : Picker, Buffer, Bumper leather, Swell leather, Box front leather, Stick Bumper dan Tension brake leather. Kapasitas produksi 700 buah/hari, sehingga per-tahun = 210.000 buah. Analisa ekonomi menunjukkan bahwa Total Modal (modal tetap dan modal dan modal kerja) = Rp. 149.89.750,00 biaya produksi 1 tahun (biaya tetap dan biaya tidak tetap) = Rp. 364.939.375,00. Harga pokok Rp, 12.165,00 (untuk 7 jenis komponen); ke untungan sebelum pajak Rp. 57.310.625,00 dan setelah dipotong pajak Rp. 45.848.500,00
Penelitian pengaruh variasi bahan pelunak naphtenic oil terhadap sifat fisis tegangan putus dan perpanjangan putus kompon karet untuk alas sapi Luciawati Sunarjo; Siti Rochani
Majalah Kulit, Karet, dan Plastik Vol 12, No 22 (1996): Majalah Barang Kulit, Karet, dan Plastik
Publisher : Center for Leather, Rubber, and Plastic Ministry of Industry, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (2816.439 KB) | DOI: 10.20543/mkkp.v12i22.347

Abstract

The aim of this research is to know influence of plasticizer naphtenic oil to the physical properties of tensile strength and elongation at break of rubber compound for cowmats. It makes from Rubber Smoke Sheet (RSS) and Styrene Butadiene Rubber 1502 (SBR) as raw material with addition ingredients are Calcium Carbonate, FEF black, Stearic Acid, Zinc Oxide, Plasticizer Naphtenic  Oil, Paraffine Wax, TMT, CBS, AOSP and Sulphur as Vulcanizing agent. Rubber compound for cowmats, formed to slab by hydraulic press at 1500C and 150 Kg/cm2. Than tested tensile strength and elongation at break. The result of this research indicated that platicizer naphtenic oil (x) and tensile strength have regression equation as Y1 = 24.168 – 0.634 X (r = 0.87), while naphtenic oil and elongation at break have regression equation as Y2 = 236.32 + 21 X (r = 0.88).   INTISARI  Penelitian ini bertujuan untuk mengetahui pengaruh variasi bahan pelunak naphtenic oil terhadap sifat fisis tegangan putus dan perpanjangan putus kompon karet untuk alas sapi. Kompon karet untuk alas sapi dibuat dari bahan baku Rubber Smoke Sheet (RSS) dan Styrene Butadiene Rubber 1502 (SBR) ditambah dengan ingredient-ingredient antara lain Calcium Carbonate, FEF black, Asam Stearat, bahan pelunak Naphtenic Oil, Paraffin Wax, TMT, CBS, AOSP dan bahan pemvulkanisasi Sulphur. Kompon karet untuk alas sapi, dibuat menjadi bentuk slab dengan alat hydraulic press pada suhu 1500C dan tekanan 150 Kg/cm2. Kompon yang didapat diuji tegangan putus dan perpanjangan putusnya. Hasil penelitian menunjukkan bahwa variasi naphtenic oil (X) dengan tegangan putus (Y1) mempunyai persamaan regresi Y1 = 24, 168 – 0,634 X dengan koefisien korelasi 0,87, sedangkan naphtenic oil dengan perpanjangan putus (Y2) mempunyai persamaan regresi Y2 = 236,32 + 21X dengan koefisien korelasi 0,88. 
Limbah bahan berbahaya dan beracun (B3) D Karyadi
Majalah Kulit, Karet, dan Plastik Vol 10, No 20 (1995): Majalah Barang Kulit, Karet, dan Plastik
Publisher : Center for Leather, Rubber, and Plastic Ministry of Industry, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (2017.142 KB) | DOI: 10.20543/mkkp.v10i20.449

Abstract

The waste of B3 is every waste contain of a dangerous anfd of or toxic goods. B3 waste can be produced from specific source, nort specific source and dispodal chemicals.              B3 waste has one or more characteristic as follow : corrosive reactive, easy to burm, easy to explode, toxic and infection.              Every body or enterprice is not permitted to import B3 waste from abroard to Indonesia or vice versa without permission from the Government of Indonesia Republic.  INTISARI               Limbah B3 adalah setiap limbah yang mengandung bahan berbahaya dan atau beracun. Limbah B3 dapat dapat dihasilkan dari sumber specific, sumber tidak specific dan bahan kimia yang dibuang.              Limbah B3 memiliki sesuatu atau lebih karakteristik berikut : korosif, reraktif, mudah terbakar, mudah meledak beracun dan menyebabkan infeksi.              Setiap orang atau badan usaha dilang memasukkan limbah B3 dari luar negri kedalam negri atau sebaliknyatanpa persetujuan pemerintah Republik Indonesia. 

Filter by Year

1984 2021


Filter By Issues
All Issue Vol 37, No 2 (2021): Majalah Kulit, Karet, dan Plastik Vol 37, No 1 (2021): Majalah Kulit, Karet, dan Plastik Vol 36, No 2 (2020): Majalah Kulit, Karet, dan Plastik Vol 36, No 1 (2020): Majalah Kulit, Karet, dan Plastik Vol 35, No 2 (2019): Majalah Kulit, Karet, dan Plastik Vol 35, No 1 (2019): Majalah Kulit, Karet, dan Plastik Vol 34, No 2 (2018): Majalah Kulit, Karet, dan Plastik Vol 34, No 1 (2018): Majalah Kulit, Karet dan Plastik Vol 33, No 2 (2017): Majalah Kulit, Karet, dan Plastik Vol 33, No 2 (2017): Majalah Kulit, Karet, dan Plastik Vol 33, No 1 (2017): Majalah Kulit, Karet, dan Plastik Vol 33, No 1 (2017): Majalah Kulit, Karet, dan Plastik Vol 32, No 2 (2016): Majalah Kulit, Karet, dan Plastik Vol 32, No 2 (2016): Majalah Kulit, Karet, dan Plastik Vol 32, No 1 (2016): Majalah Kulit, Karet, dan Plastik Vol 32, No 1 (2016): Majalah Kulit, Karet, dan Plastik Vol 31, No 2 (2015): Majalah Kulit, Karet, dan Plastik Vol 31, No 2 (2015): Majalah Kulit, Karet, dan Plastik Vol 31, No 1 (2015): Majalah Kulit, Karet, dan Plastik Vol 31, No 1 (2015): Majalah Kulit, Karet, dan Plastik Vol 30, No 2 (2014): Majalah Kulit, Karet, dan Plastik Vol 30, No 2 (2014): Majalah Kulit, Karet, dan Plastik Vol 30, No 1 (2014): Majalah Kulit, Karet, dan Plastik Vol 30, No 1 (2014): Majalah Kulit, Karet, dan Plastik Vol 29, No 2 (2013): Majalah Kulit, Karet, dan Plastik Vol 29, No 2 (2013): Majalah Kulit, Karet, dan Plastik Vol 29, No 1 (2013): Majalah Kulit, Karet, dan Plastik Vol 29, No 1 (2013): Majalah Kulit, Karet, dan Plastik Vol 28, No 2 (2012): Majalah Kulit, Karet, dan Plastik Vol 28, No 2 (2012): Majalah Kulit, Karet, dan Plastik Vol 28, No 1 (2012): Majalah Kulit, Karet, dan Plastik Vol 28, No 1 (2012): Majalah Kulit, Karet, dan Plastik Vol 27, No 1 (2011): Majalah Kulit, Karet, dan Plastik Vol 27, No 1 (2011): Majalah Kulit, Karet, dan Plastik Vol 26, No 1 (2010): Majalah Kulit, Karet, dan Plastik Vol 26, No 1 (2010): Majalah Kulit, Karet, dan Plastik Vol 25, No 1 (2009): Majalah Kulit, Karet, dan Plastik Vol 25, No 1 (2009): Majalah Kulit, Karet, dan Plastik Vol 24, No 1 (2008): Majalah Kulit, Karet, dan Plastik Vol 24, No 1 (2008): Majalah Kulit, Karet, dan Plastik Vol 23, No 1 (2007): Majalah Kulit, Karet, dan Plastik Vol 23, No 1 (2007): Majalah Kulit, Karet, dan Plastik Vol 22, No 1 (2006): Majalah Kulit, Karet, dan Plastik Vol 22, No 1 (2006): Majalah Kulit, Karet, dan Plastik Vol 21, No 1 (2005): Majalah Kulit, Karet, dan Plastik Vol 21, No 1 (2005): Majalah Kulit, Karet, dan Plastik Vol 20, No 1 (2004): Majalah Kulit, Karet, dan Plastik Vol 20, No 1 (2004): Majalah Kulit, Karet, dan Plastik Vol 19, No 1 (2003): Majalah Kulit, Karet, dan Plastik Vol 19, No 1 (2003): Majalah Kulit, Karet, dan Plastik Vol 18, No 1 (2002): Majalah Barang Kulit, Karet, dan Plastik Vol 18, No 1 (2002): Majalah Barang Kulit, Karet, dan Plastik Vol 17, No 1-2 (2001): Majalah Barang Kulit, Karet, dan Plastik Vol 17, No 1-2 (2001): Majalah Barang Kulit, Karet, dan Plastik Vol 14, No 26 (1999): Majalah Barang Kulit, Karet, dan Plastik Vol 14, No 26 (1999): Majalah Barang Kulit, Karet, dan Plastik Vol 15, No 2 (1999): Majalah Barang Kulit, Karet, dan Plastik Vol 15, No 2 (1999): Majalah Barang Kulit, Karet, dan Plastik Vol 12, No 25 (1998): Majalah Barang Kulit, Karet, dan Plastik Vol 12, No 25 (1998): Majalah Barang Kulit, Karet, dan Plastik Vol 12, No 24 (1997): Majalah Barang Kulit, Karet, dan Plastik Vol 12, No 24 (1997): Majalah Barang Kulit, Karet, dan Plastik Vol 12, No 23 (1997): Majalah Barang Kulit, Karet, dan Plastik Vol 12, No 23 (1997): Majalah Barang Kulit, Karet, dan Plastik Vol 12, No 22 (1996): Majalah Barang Kulit, Karet, dan Plastik Vol 12, No 22 (1996): Majalah Barang Kulit, Karet, dan Plastik Vol 11, No 21 (1996): Majalah Barang Kulit, Karet, dan Plastik Vol 11, No 21 (1996): Majalah Barang Kulit, Karet, dan Plastik Vol 10, No 20 (1995): Majalah Barang Kulit, Karet, dan Plastik Vol 10, No 20 (1995): Majalah Barang Kulit, Karet, dan Plastik Vol 10, No 19 (1995): Majalah Barang Kulit, Karet, dan Plastik Vol 10, No 19 (1995): Majalah Barang Kulit, Karet, dan Plastik Vol 9, No 18 (1994): Majalah Barang Kulit, Karet, dan Plastik Vol 9, No 18 (1994): Majalah Barang Kulit, Karet, dan Plastik Vol 9, No 17 (1994): Majalah Barang Kulit, Karet, dan Plastik Vol 9, No 17 (1994): Majalah Barang Kulit, Karet, dan Plastik Vol 9, No 16 (1994): Majalah Barang Kulit, Karet, dan Plastik Vol 9, No 16 (1994): Majalah Barang Kulit, Karet, dan Plastik Vol 7, No 12-13 (1992): Majalah Barang Kulit, Karet, dan Plastik Vol 7, No 12-13 (1992): Majalah Barang Kulit, Karet, dan Plastik Vol 8, No 15 (1992): Majalah Barang Kulit, Karet, dan Plastik Vol 8, No 15 (1992): Majalah Barang Kulit, Karet, dan Plastik Vol 8, No 14 (1992): Majalah Barang Kulit, Karet, dan Plastik Vol 8, No 14 (1992): Majalah Barang Kulit, Karet, dan Plastik Vol 6, No 10-11 (1991): Majalah Barang Kulit, Karet, dan Plastik Vol 6, No 10-11 (1991): Majalah Barang Kulit, Karet, dan Plastik Vol 5, No 9 (1990): Majalah Barang Kulit, Karet, dan Plastik Vol 5, No 9 (1990): Majalah Barang Kulit, Karet, dan Plastik Vol 4, No 8 (1989): Majalah Barang Kulit, Karet, dan Plastik Vol 4, No 8 (1989): Majalah Barang Kulit, Karet, dan Plastik Vol 3, No 7 (1988): Majalah Barang Kulit, Karet, dan Plastik Vol 3, No 7 (1988): Majalah Barang Kulit, Karet, dan Plastik Vol 3, No 6 (1988): Majalah Barang Kulit, Karet, dan Plastik Vol 3, No 6 (1988): Majalah Barang Kulit, Karet, dan Plastik Vol 2, No 5 (1987): Majalah Barang Kulit, Karet, dan Plastik Vol 2, No 5 (1987): Majalah Barang Kulit, Karet, dan Plastik Vol 2, No 3-4 (1986): Majalah Barang Kulit, Karet, dan Plastik Vol 2, No 3-4 (1986): Majalah Barang Kulit, Karet, dan Plastik Vol 1, No 2 (1984): Majalah Barang Kulit, Karet, dan Plastik Vol 1, No 2 (1984): Majalah Barang Kulit, Karet, dan Plastik Vol 1, No 1 (1984): Majalah Barang Kulit, Karet, dan Plastik Vol 1, No 1 (1984): Majalah Barang Kulit, Karet, dan Plastik More Issue