Article Per Year (5 Year)
p-Index From 2020 - 2025
0.983
P-Index
This Author published in this journals
All Journal METAL : Jurnal Sistem Mekanik dan Termal Indonesian Journal of Forestry Research
Triwibowo, Dimas
Unknown Affiliation
Agriculture, Biological Sciences & Forestry Automotive Engineering Industrial & Manufacturing Engineering Materials Science & Nanotechnology Mechanical Engineering

Published : 4 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 4 Documents
Search

 1 
IDENTIFICATION OF LIGNOCELLULOSE-LIKE MATERIAL USING SPECTROSCOPY ANALYSIS Adi, Danang Sudarwoko; Fatriasari, Widya; Narto; Triwibowo, Dimas; Darmawan, Teguh; Amin, Yusup; Sofianto, Imran Arra'd; Pari, Rohmah; Agustiningrum, Dyah Ayu; Rahmanto, Raden Gunawan Hadi; Dewi, Listya Mustika; Himmi, Setiawan Khoirul; Djarwanto; Damayanti, Ratih; Dwianto, Wahyu
Indonesian Journal of Forestry Research Vol. 11 No. 2 (2024): Indonesian Journal of Forestry Research
Publisher : Association of Indonesian Forestry and Environment Researchers and Technicians

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.59465/ijfr.2024.11.2.299-306

Abstract

Lignocellulose materials, such as bamboo, rattan, and wood, have been largely used for furniture and crafts. On the other hand, the utilization of lignocellulose-like materials, which have a similar texture and appearance to those from nature, has been increasing recently due to their superior durability. This research aimed to identify the lignocellulose-like material using spectroscopy analysis, such as Raman and Near Infrared (NIR) which is well-known as a non-destructive, quick, and accurate approach for material identification. We investigated 4 types of lignocellulose-like materials that were provided by Dewan Serat Indonesia (The Indonesian Fiber Council) from an industry that produces them. The NIR analysis was performed at wavenumbers 10,000-4,000 cm-1. The natural lignocellulose (bamboo and wood) and the polymers (polyethylene and polyproline) were used as standards. Raman analysis was further employed to identify the composition of selected lignocellulose-like materials by comparing their spectra with the library software. The results showed that the original NIR spectra of lignocellulose-like and those natural materials were different, indicating that the NIR analysis can differentiate those materials. The NIR spectra of lignocellulose-like materials were similar to those of polyethylene spectra. Those lignocellulose-like were also identified as polyethylene due to the similarity of the Raman spectra and their library spectra.
THE SURFACE CHARACTERISTICS AND PHYSICAL PROPERTIES OF SENGON WOOD AT HIGH-TEMPERATURE HEATING TREATMENTS Fariha, Tushliha Ayyuni; Marbun, Sari D; Sudarmanto; Narto; Bahanawan, Adik; Sejati, Prabu S; Darmawan, Teguh; Triwibowo, Dimas; Adi, Danang S; Amin, Yusup; Augustina, Sarah; Dwianto, Wahyu; Sari, Rita K; Alipraja, Irsan; Wahyudi, Imam; Kusuma, EM. Latif R
Indonesian Journal of Forestry Research Vol. 12 No. 1 (2025): Indonesian Journal of Forestry Research
Publisher : Association of Indonesian Forestry and Environment Researchers and Technicians

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.59465/ijfr.2025.12.1.135-149

Abstract

Sengon (Falcataria moluccana Miq.) is a fast-growing timber species widely distributed in Indonesia. However, its dimensional instability and low surface quality have limited its widespread use. Wood modification is essential for enhancing these properties, and one effective approach is heat treatment. This study investigated the effects of different heat treatment methods and durations on color change, surface roughness, weight loss (WL), decreased density, and dimensional stability of sengon wood. The heat modification process was conducted using two methods: oven-heating and hot press-heating, with temperatures set at 200°C for durations ranging from 1 to 5 hours. The results indicated that oven-heated samples exhibited higher surface roughness, weight loss, density reduction, and dimensional stability while showing less color change than hot press-heated samples. Additionally, the hot press-heated samples displayed more significant color changes (darkening) and smoother surface roughness. WL and decreased density were also more pronounced with longer heating durations, except for the 4- and 5-hour hot press-heating treatments. Notably, oven-heated samples demonstrated higher dimensional stability than hot press-heated samples as the duration of heating increased. Based on the results, the optimal treatment varies depending on the desired product characteristics. For improved surface qualities with consideration of WL, the optimum treatment is a 2-hour hot press-heating treatment. Higher dimensional stability can be achieved through a 3-hour oven-heating treatment.
Sessile Drop Method Prediction of Particleboard Mechanical Properties Pinem, Mekro Permana; Adiwinoto, Aldiansyah Rudy; Yusuf, Yusvardi; Satria, Dhimas; Dwianto, Dwianto; Sunardi, Sunardi; Hendra, Hendra; Kanani, Nufus; Demustila, Harly; Triwibowo, Dimas
METAL: Jurnal Sistem Mekanik dan Termal Vol. 8 No. 1 (2024): Jurnal Sistem Mekanik dan Termal (METAL)
Publisher : Department of Mechanical Engineering, Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/metal.8.1.6-13.2024

Abstract

Agriculture waste-based materials have considerable potential as wood-based particleboard alternatives. It has been produced abundantly from nature and considers an eco-friendly material. One of the enormous resources is the paddy by-product, rice straw (about 500 million tonnes per year worldwide). In this work, the mechanical properties of rice straw-based particleboard are predicted easily and quickly using the sessile drop method.  Rice straw was crushed into 2-5 mm diameter powder-like materials, and corn starch was used as the binder. The rice straw particleboard was formed under a hot press machine (5 MPa, 180°C and 120 minutes). Conventionally, the sample mechanical property was tested through Universal Testing Machine (UTM). Unfortunately, the process is costly and difficult to access. It is necessary to have a rapid and low-cost presumption of the mechanical particleboard properties toward more efficient manufacturing. This work proposes a simple sessile drop method to indicate particleboard mechanical properties. Multiple linear regression was performed to see the correlation between sessile drop and UTM testing. It was found statistically that the sessile drop method could be used as an early prediction of particleboard mechanical properties.
BENDING STRENGTH OF LIGNOCELLULOSIC MATERIALS IN SOFTENING CONDITION Dwianto, Wahyu; Damayanti, Ratih; Darmawan, Teguh; Sejati, Prabu Satria; Akbar, Fazhar; Adi, Danang Sudarwoko; Bahanawan, Adik; Amin, Yusup; Triwibowo, Dimas
Indonesian Journal of Forestry Research Vol. 7 No. 1 (2020): Indonesian Journal of Forestry Research
Publisher : Association of Indonesian Forestry and Environment Researchers and Technicians

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.59465/ijfr.2020.7.1.59-70

Abstract

This research aimed to understand the softening behaviour and viscoelastic property of wood, rattan, and bamboo as lignocellulosic materials. Nine years-old fast growing teak wood [Tectona grandis L.f.], rattan [Calamus sp.], and 3 years-old andong bamboo [Gigantochloa pseudoarundinaceae (Steud.) Widjaja] were used for the experiments. The samples were taken from the bottom, middle and upper parts for wood and rattan, and that for bamboo were cut from the 1st to 20th internodes. Static bending tests were carried out in fresh (green) as control samples, air-dried, and softened by microwave heating (MW) for 1 min to determine modulus of rupture (MOR) and modulus of elasticity (MOE). The results showed that the MOR and MOE values of wood, rattan, and bamboo increased from fresh to air-dried condition, and decreased by MW. When compared at the same density, drastic increase was observed for the normalized MOR value in air-dried of rattan, i.e. 2.5 fold. However, the decreasing of all the normalized MOR values were almost the same, i.e. 0.5 fold when they were softened by MW. Remarkably increase was also appeared for the normalized MOE value in air-dried of rattan, i.e. 3.0 fold and decreased to almost zero by MW. These results indicated that rattan was more easily bent, followed by bamboo and then wood. Hydrothermal properties of chemical components significantly affected the changes of strength (MOR) and elastic properties (MOE). However, the differences in bending strength of wood, rattan, and bamboo were more likely due to differences in their anatomical structures.
Co-Authors Adi, Danang S Adiwinoto, Aldiansyah Rudy Akbar, Fazhar Augustina, Sarah Bahanawan, Adik Danang Sudarwoko Adi Dhimas Satria Djarwanto Dwianto, Dwianto Dyah Ayu Agustiningrum, Dyah Ayu Fariha, Tushliha Ayyuni Gopar, Mohamad Harly Demustila Hendra Hendra Himmi, Setiawan Khoirul Imam Wahyudi Indrawan, Imam Wahyudi Irsan ALIPRAJA Kusuma, EM. Latif R Kusumah, Sukma Surya Listya Mustika Dewi Marbun, Sari D Mekro Permana Pinem, Mekro Permana Narto Nufus Kanani, Nufus Pari, Rohmah Purnomo, Deni Rahmanto, Raden Gunawan Hadi Ratih Damayanti Sari, Rita K Sejati, Prabu S Sejati, Prabu Satria Sofianto, Imran Arra'd SUDARMANTO Sudarmanto Sudarmanto, Sudarmanto Sunardi Sunardi Teguh DARMAWAN Wahyu DWIANTO Widya FATRIASARI Yusup AMIN Yusvardi Yusuf