Claim Missing Document
Check
Articles

Found 11 Documents
Search

PENGARUH BENTUK PISAU SESET PADA HASIL SESETAN SECARA MANUAL abimanyu yogadita restu aji; Hendy Vavili Shofa
Corak : Jurnal Seni Kriya Vol 10, No 2 (2021): NOVEMBER 2021
Publisher : Institut Seni Indonesia Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24821/corak.v10i2.5328

Abstract

One of the steps in the preparation of leather products is the skiviing process. Sikiving activities are activities carried out to reduce the thickness of the skin surface on the flesh or on the surface. The skiving is carried out by using a blade that comes in different shapes and sizes. With the difference in the shape of the existing knives, it is suspected that they have an influence on the results of the skiving. The research was carried out by conducting an experimental slash on the skin using a blade with a different shape. The method used in this research is to experiment directly with different blades. The results of this study are 1. The shape of the set blade with a curved tendency is easier to use compared to the set blade with a straight blade, 2. The shape of the blade can affect the result of the adjustment, the shape that tends to be curved can be used in all kinds of areas. which results in a flatter sling and no tearing. Salah satu langkah dalam preparasi produk kulit adalah proses menyeset. Kegiatan menyeset adalah kegiatan yang dilakukan untuk mengurangi ketebalan permukaan kulit pada bagian daging ataupun pada permukaannya. Kegiatan menyeset dilakukan dengan menggunakan pisau seset yang memiliki bentuk dan ukuran yang berbeda-beda. Dengan perbedaan bentuk pisau yang ada tersebut, diduga memiliki pengaruh terhadap hasil sesetan. Penelitian dilakukan dengan melakukan percobaan menyeset pada kulit dengan menggunakan pisau seset dengan bentuk yang berbeda. Metode yang digunakan dalam penelitian ini adalah dengan melakukan percobaan penyesetan secara langsung dengan menggunakan bentuk pisau yang berbeda-beda. Hasil dari penelitian ini adalah  1.Bentuk mata pisau seset dengan kecenderungan melengkung lebih mudah digunakan dibandingkan dengan pisau seset dengan bentuk mata pisau yang cenderung lurus, 2. Bentuk mata pisau dapat mempengaruhi hasil penyesetan, bentuk yang cenderung melengkung dapat digunakan pada segala macam bidang seset yang berakibat hasil sesetan lebih rata dan tidak terdapat sobekan
PENENTUAN PEMILIHAN BAHAN DALAM PEMBUATAN ACUAN ALAS KAKI SECARA MANUAL Abimanyu Yogadita Restu Aji
Corak : Jurnal Seni Kriya Vol 6, No 2 (2017): NOVEMBER 2017
Publisher : Institut Seni Indonesia Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (424.282 KB) | DOI: 10.24821/corak.v6i2.2399

Abstract

Reference of shoe last is something quite unique. In making the reference of footwear, special raw materials are required to produce a reference with good quality. The quality of this reference is very influential on the long life of a reference. In addition, the quality of the raw materials used also affects the shape of a reference. The research question posed is what factors determine the criteria for selecting the material, in the process of making the reference of footwear by manual technique. Data collection methods generally refer to interview techniques based on the principle, namely structured interviews, semi-structured and unstructured. Data analysis techniques use a gradual coding system with a focus of attention on the factors that determine the material selection criteria in manual reference footwear generation. Keywords: Reference of footwear, manuals, material characters Acuan alas kaki merupakan sesuatu yang cukup unik. Dalam pembuatan acuan alas kaki, diperlukan bahan baku khusus agar menghasilkan acuan dengan kulitas yang baik. Kualitas acuan ini sangat berpengaruh terhadap lama pakai dari sebuah acuan. Selain itu, kualitas dari bahan baku yang digunakan juga berpengaruh terhadap bentuk dari sebuah acuan. Pertanyaan penelitian yang diajukan adalah faktor apa yang menentukan kriteria pemilihan bahan, dalam proses pembuatan acuan alas kaki dengan teknik manual. Metode pengumpulan data secara umum mengacu pada teknik wawancara berdasarkan prinsipnya, yaitu wawancara terstruktur, semi terstruktur dan tidak terstruktur. Teknik analisis data menggunakan sistem pengkodean secara bertahap dengan fokus perhatian pada faktor yang menentukan kriteria pemilihan bahan dalam pembuatan acuan alas kaki secara manual. Kata kunci : Acuan alas kaki, manual, karakter bahan
Shoe Lasting With Manual Techniques Abimanyu Yogadita Restu Aji
Corak Vol 11, No 1 (2022): MAY 2022
Publisher : Institut Seni Indonesia Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24821/corak.v11i1.6711

Abstract

Shoe last is a foot imitation used in the process of making footwear. The shoe last can be plastic, aluminum, or wood. Footwear last can be made of wood with manual techniques. The making of shoelast using manual techniques is thought to have advantages since it can produce a large size and dimension suitability with the feet used as the models. The purpose of this study was to identify how the craftsman utilizes his body to manually make a precisive shoe last. The research employs the observation method. The authors make observations on the manual process of making shoelast. The research found that pattern making is the first step in making a shoe last. Three techniques of manual shoe last stages are used. They are the strong swing technique to form the basic shape, the light swing technique to form a global shape, and the filing process to form a detailed shoe last.
Pelatihan Pembuatan Produk Sepatu Menggunakan Teknik Copy of Last di DIT Mwanza Tanzania Abimanyu Yogadita Restu Aji; Rofiatun Nafiah; Mochammad Charis Hidayatullah
JPM: Jurnal Pengabdian Masyarakat Vol. 5 No. 3 (2025): January 2025
Publisher : Forum Kerjasama Pendidikan Tinggi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.47065/jpm.v5i3.2173

Abstract

Vocational education and training are one of the main priorities in improving the quality of human resources in various countries. This training program aims to improve capacity and competence in developing countries through sharing knowledge and experience. One of its main initiatives is the Expert Dispatch Program, which sends instructors from ATK Polytechnic to provide technical assistance related to shoe making at DIT (Dar es Salaam Institute of Technology) Mwanza, Tanzania. The implementation of this activity is divided into 3 stages: 1) Preparation, 2) Implementation, 3) Evaluation of activities. Shoe making begins with manual design making, followed by pattern making using measurable methods, cutting materials and the shoe making process. The results of the series of shoe making processes from design activities to shoe making can be said to be going well, this is evidenced by the results of the training participants' shoes meeting the assessment aspects including neatness, suitability and visual appearance. The level of understanding of the participants regarding the training material provided is categorized as good. A total of 25 participants with an indicator of 21 participants experiencing an increase in understanding the material that has been delivered is a good and positive thing, and provides a conclusion that there is a new value/understanding/knowledge that has been received, understood, and comprehended by participants during the 12 days of training. The instructor succeeded in delivering the material and meeting the needs of the participants, with an average total evaluation point reaching 4.77 (good). The assessment of all aspects of the activity including material and theme, instructor, training method, facilities and implementation showed an average value of 4.63 (good)
Modifikasi Acuan Sepatu Berbahan Kayu Secara Manual Restu Aji, Abimanyu Yogadita; Nugraha, Sanjaya; Sulistianto, Sulistianto
Corak Vol 13, No 1 (2024): Mei 2024
Publisher : Institut Seni Indonesia Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24821/corak.v13i1.9716

Abstract

AbstractShoe last is an artificial foot object used in the shoe making process. Traditionally making shoe last uses wood as a raw material. Shoe last with wood raw materials that are less dry will experience shrinkage if used for a long time. Shrinkage that occurs in the shoe last needs to be overcome by modifying the shoe last. The purpose of this study was to determine the process of modifying the shoe last, the materials used in the process of modifying the shoe last and the hardness level of the modification of the shoe last. The method used in this research is descriptive qualitative with the stages of data collection, data processing and data analysis. The result of this research is to know the shoe last modification process. The shoe last modification process starts with analyzing the parts that are experiencing shrinkage, marking the parts to be modified, and manually modifying the shoe last. The material used in the modification process uses fine sawdust combined with G glue to attach the powder to the shoe last. The results of the shoe last modification process can meet the hardness characteristics of the shoe last.Abstrak Acuan merupakan sebuah benda tiruan kaki yang digunakan dalam proses pembuatan sepatu. Pembuatan acuan secara tradisional menggunakan kayu sebagai bahan bakunya. Acuan dengan bahan baku kayu yang kurang kering akan mengalami penyusutan jika digunakan dalam jangka waktu yang lama. Penyusutan yang terjadi pada acuan perlu diatasi dengan cara dilakukan modifikasi pada acuan. Tujuan dari penelitian ini adalah untuk mengetahui proses modifikasi acuan, bahan yang digunakan dalam proses modifikasi acuan dan tingkat kekerasan dari hasil modfikasi acuan sepatu. Metode yang digunakan dalam penelitian ini adalah deskriptif kualitatif dengan tahapan pengumpulan data, pengolahan data dan analisis data. Hasil dari penelitian ini adalah dapat diketahui proses modifikasi acuan. Proses modifikasi acuan dimulai dari kegiatan menganalisa bagian yang mengalami penyusustan, pemberian penandaan bagian yang akan dimodifikasi, dan modifikasi acuan sepatu secara manual. Bahan yang digunakan dalam proses modifikasi menggunakan serbuk kayu halus yang dikombinasikan dengan lem G untuk menempelkan serbuk ke acuan. Hasil dari proses modifikasi acuan dapat memenuhi karakteristik kekerasan pada acuan,
Makna Visual Tokoh Bratasena dalam Wayang Kulit Gaya Pakualaman Abimanyu Yogadita Restu Aji
INVENSI Vol 9, No 2 (2024): Desember 2024
Publisher : Graduate School of the Indonesia Institute of the Arts Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24821/invensi.v9i2.11155

Abstract

Wayang kulit yang berkembang di Jawa memiliki berbagai macam gaya. Salah satu gaya adalah gaya Pakualaman. Terdapat ciri khusus yang membedakan antara wayang kulit Pakualaman dengan gaya wayang kulit lain. Penambahan atribut keris merupakan ciri khusus yang ada pada wayang kulit gaya Pakualaman. Penelitian ini bertujuan untuk menguak makna visual pada tokoh Bratasena gaya Pakualaman serta korelasinya dengan pemakaian atribut keris. Metode yang digunakan dalam penelitian ini adalah metode deskriptif kualitatif. Data penelitian didapatkan dengan melakukan observasi langsung ke lapangan dan wawancara dengan narasumber yang menguasai topik yang sedang diangkat. Hasil penelitian menunjukkan bahwa tambahan atribut keris berfungsi untuk lebih memanusiakan wayang kulit, karena wayang kulit Kyai Jimat gaya Pakualaman bukan diciptakan untuk pertunjukan. Penggunaan atribut keris merupakan gambaran keseharian atribut yang digunakan di lingkungan Pakualaman. Makna visual dari tokoh Bratasena sesuai yang terdapat dalam naskah Sestradisuhul, Bratasena digambarkan sebagai tokoh yang kuat, teguh pendirian, pembela kebenaran dan lurus kemauannya, hal itu merupakan nasihat yang ditujukan kepada keluarga Pakualaman. The Visual Meaning of the Character Bratasena in the Pakualaman Style of Leather Puppet ABSTRACT Shadow puppets that developed in Java have various styles. One style is the Pakualaman style. There are special characteristics that differentiate Pakualaman shadow puppets from other shadow puppet styles. The addition of the keris attribute is a special characteristic of Pakualaman style shadow puppets. This research aims to reveal the visual meaning of the Pakualaman style Bratasena character and its correlation with the use of keris attributes. The method used in this research is a qualitative descriptive method. Research data was obtained by conducting direct observations in the field and interviews with sources who mastered the topic being discussed. The results of the research show that the additional attribute of the keris serves to further humanize the wayang kulit, because the Pakualaman style of wayang kulit Kyai Jimat was not created for performance. The use of keris attributes is an illustration of the everyday attributes used in the Pakualaman environment. The visual meaning of the character Bratasena is in accordance with that contained in the Sestradisuhul text, Bratasena is described as a strong figure, firm in his stance, defender of truth and straight in his will, this is advice addressed to the Pakualaman family.
EFFECTS OF CASEIN AND ISOCYANATE CONCENTRATIONS AS CROSSLINKERS IN THE FINISHING PROCESS OF GOAT LEATHER FOR SHOE UPPERS Nais Pinta Adetya; Nur Mutia Rosiati; Sofwan Siddiq Abdullah; Emiliana Anggriyani; Laili Rachmawati; Mustafidah Udkhiyati; Abimanyu Yogadita Restu Aji; Ikmal Khalala
Walisongo Journal of Chemistry Vol. 9 No. 1 (2026): Walisongo Journal of Chemistry
Publisher : Department of Chemistry Faculty of Science and Technology UIN Walisongo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21580/wjc.v9i1.31481

Abstract

This study aimed to investigate the interaction between casein, used as a crosslinker, and binders in the leather coating process and to evaluate the quality of leather produced using casein crosslinkers compared with conventional isocyanate crosslinkers. The research methodology consisted of three stages: preparation and characterization of the crosslinkers, finishing of crust goat leather, and final testing. The FTIR spectrum of casein indicated the presence of stretching vibrations associated with functional groups related to coating performance. Leather quality was evaluated through color fastness to rubbing and leather softness tests. From a chemical reaction perspective, casein shows potential as a crosslinker when used in combination with isocyanate crosslinkers. PUD binders do not directly form covalent bonds with casein through –OH groups under normal conditions; however, strong physical interactions through hydrogen bonding can occur. In the presence of a crosslinker such as isocyanate, covalent reactions may take place, forming a stronger urethane/urea network. The rubbing fastness of all leather samples, except C1 (10 parts casein) and I3 (30 parts isocyanate), met the SNI standard.
SLIP BEADING TECHNIQUE TREATMENT IN THE PROCESS OF MAKING OXFORD SHOES Abimanyu Yogadita R; Sanjaya Nugraha; Warsito
Berkala Penelitian Teknologi Kulit, Sepatu, dan Produk Kulit Vol. 22 No. 2 (2023): Berkala Penelitian Kulit, Sepatu dan Produk Kulit
Publisher : Politek ATK Yogyakarta Press

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58533/p4c0tn90

Abstract

Slip beading is an edge treatment that is commonly carried out by the sports shoe industry. Slip beading is a treatment on the edges that can add to the appearance of shoes to be more aesthetic. Slip beading is actually very good even though the work is difficult because the ribbon for the slip beading can use a different color from the color of the top of the shoe, but by being clever in choosing the color you will get shoes with a good appearance and contrasting color variations. Difficulties in the application of variations of slip beading arise due to the thickness of the material and it is only possible to do it with sophisticated equipment. Based on these problems, it is necessary to conduct research on the application of slip beading variations on shoes with classic models. The method used in this research is a qualitative method with an experimental method. That is trying to test with several samples of size variations in slip beading and several materials to find the best composition of size variations and material variations. The results of this study are the emergence of oxford shoe designs with variations of slip beading that match the material and width of the shoe components.
IDENTIFICATION OF DEFECTS IN THE OUTSOLE MANUFACTURING PROCESS OF REBECA ARTICLES USING SIX SIGMA ANALYSIS AT PT XYZ DKI JAKARTA Dede Dewi Soniastri; Abimanyu Yogadita Restu Aji
Berkala Penelitian Teknologi Kulit, Sepatu, dan Produk Kulit Vol. 23 No. 1 (2024): Berkala Penelitian Kulit, Sepatu, dan Produk Kulit
Publisher : Politek ATK Yogyakarta Press

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58533/25b3d917

Abstract

PT XYZ located in DKI Jakarta is a company operating in the footwear sector. In the production process in the outsole section in Rebeca's article, several problems were found, namely dirty outsole, bubbled outsole, creeping outsole, and holey outsole. The aim of this research is to identify the factors that cause outsole defects in Rebeca's articles and to find out the results of the identification in an effort to reduce outsole defects in Rebeca's articles. The method for carrying out this research uses the Six Sigma method. The results of identifying the outsole of the Rebeca article show that based on the DPMO calculation of the outsole defect in the Rebeca article, an average DPMO value of 306.25 was obtained with a sigma level value of 4.94. This shows that the outsole production process has a capacity above the average level. sigma, but this has not achieved the target of improving the quality of Six Sigma, namely reaching a Sigma level of 6 Sigma. Proposed improvements that can be given to the factors that cause defects that occur in the outsole.
THE EFFECT OF PATTERN CONFORMITY ON THE USE OF SHOELAST WITH DIFFERENT HEIGHTS Abimanyu Yogadita; Sanjaya Nugraha; Mianto Rochmadi
Berkala Penelitian Teknologi Kulit, Sepatu, dan Produk Kulit Vol. 23 No. 2 (2024): Berkala Penelitian Kulit, Sepatu, dan Produk Kulit
Publisher : Politek ATK Yogyakarta Press

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58533/2jvbwd33

Abstract

Pattern is an important component in the shoe making process. The suitability of the pattern in making shoes will affect the comfort of wearing when the shoes are used. This is because the pattern is made from a shoe last, so the pattern takes the size details from the shoe last used. However, in practice, patterns are sometimes used to make shoes of different sizes. Based on this problem, it is necessary to conduct research regarding the application of pattern conformity to the use of shoe last that have different heights. The method used in this research is an experimental method. The results of this research are that patterns that do not match will be difficult to use in shoe last that have differences in heel height. So that the use of a pattern that matches the shoe last when making shoes must match the shoe last used in making the pattern.