Claim Missing Document
Check
Articles

Found 33 Documents
Search

Reviews on Technology and Standard of Spatial Audio Coding Ikhwana Elfitri; Amirul Luthfi
JURNAL NASIONAL TEKNIK ELEKTRO Vol 6, No 1: Maret 2017
Publisher : Jurusan Teknik Elektro Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (391.037 KB) | DOI: 10.25077/jnte.v6n1.372.2017

Abstract

Market  demands  on a more impressive entertainment media have motivated for delivery of three dimensional  (3D) audio content to  home consumers  through Ultra  High  Definition  TV  (UHDTV), the next generation of TV broadcasting, where spatial  audio  coding plays  fundamental role. This paper reviews fundamental concept on spatial audio coding which includes technology, standard, and application. Basic principle of object-based audio reproduction system  will also be elaborated, compared  to  the  traditional channel-based system, to provide good understanding on this popular interactive audio reproduction system which gives end users flexibility to render  their  own preferred  audio composition.Keywords : spatial audio, audio coding, multi-channel audio signals, MPEG standard, object-based audio
Analisis Kemampuan Mpeg Spatial Audio Object Coding untuk Reproduksi Audio Multikanal Amirul Luthfi; Ikhwana Elfitri
JURNAL NASIONAL TEKNIK ELEKTRO Vol 6, No 2: Juli 2017
Publisher : Jurusan Teknik Elektro Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (448.476 KB) | DOI: 10.25077/jnte.v6n2.383.2017

Abstract

MPEG Spatial Audio Object Coding (MPEG SAOC) is the first standard on object-based audio coding released by International Organization for Standardization (ISO). The MPEG SAOC has ability to reproduce multichannel audio at the decoder side. In this paper, performance of the MPEG SAOC on multichannel audio reproduction is analyzed and compared to MPEG Surround (MPS). The results show both MPEG SAOC and MPS have Objective Difference Grade (ODG) at impeceptible level. However, the MPEG SAOC encoder can only supports one multichannel object audio input.Keywords :Spatial Audio Object Coding, Object-based Audio, and Multichannel AudioAbstrak— MPEG Spatial Audio Object Coding (MPEG SAOC) merupakan pengkode audio berbasis objek pertama yang telah telah distandarisasi oleh International Organization for Standardization (ISO). MPEG SAOC memiliki kemampuan reproduksi audio multikanal pada sisi decoder. Pada paper ini, dianalisis kemampuan reproduksi audio multikanal pada decoder MPEG SAOC dan dibandingkan dengan MPEG Surround (MPS). Hasil penelitian menunjukkan, MPEG SAOC dan MPS sama-sama memiliki Objective Difference Grade (ODG) pada level imperceptible. Namun, encoder MPEG SAOC hanya mendukung masukan satu objek audio multikanal saja.Kata Kunci : Spatial Audio Object Coding, Audio berbasis Objek dan Audio Multikanal
Benda Referensi sebagai Acuan Penyederhanaan untuk Deteksi Benda pada Kondisi Terhalang dengan Metoda Support Machine Rahmadi Kurnia; Ratna Atika; Ikhwana Elfitri
JURNAL NASIONAL TEKNIK ELEKTRO Vol 6, No 2: Juli 2017
Publisher : Jurusan Teknik Elektro Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (413.502 KB) | DOI: 10.25077/jnte.v6n2.415.2017

Abstract

Object in an unobstructed condition is a very difficult condition to recognize. This is due to the overall size of imperfect objects visible. For robot applications, of course this will be very annoying. This condition will lead to errors in decision-making for robots. On the other hand, the crowd of objects that are too much in the robot work environment will complicate the robot in executing objects desired by the user. Robot will easily recognize the object if the object is in a limited environment and not too much so that the focus of his work is more optimal. On too many objects, the probability of the target object will decrease as the number of other objects also allows becoming the candidate as the target object. For that we need an effort to simplify the work environment of the robot so that the focus can be more focused by dividing the environment that is too crowded into several parts. One of the benchmarks in dividing the environment is a reference object. This research will focus on the discussion and the role of reference objects to simplify the environment that is too complicated for robot work. The reference object will be determined by the robot itself from the features with predefined parameters. An important point in this research is how robots can be as intelligent as humans think in determining what references object criteria are used. As cluster determination for reference object used support vector machine method as guide of robot determine class and feature object. The desired end goal is the formation of a simple system in the robot, Simple in this sense is the maximum number of objects 3 pieces.Keywords : object detection, support vector machine, reference objectAbstrak— Sebuah benda dalam kondisi terhalang, merupakan kondisi yang sangat sulit untuk dikenali. Hal ini disebabkan keseluruhan bentuk benda tidak sempurna terlihat. Untuk aplikasi robot, tentu saja hal ini akan sangat mengganggu. Benda yang tidak sempurna terlihat akan menimbulkan kesalahan pada pengambilan keputusan bagi robot. Di sisi lain, kerumunan benda yang terlalu banyak pada lingkungan kerja robot, akan menyulitkan robot dalam mengeksekusi benda yang diinginkan oleh pengguna. Robot akan mudah mengenali benda apabila benda tersebut berada pada lingkungan yang terbatas dan tidak terlalu banyak sehingga fokus kerja nya lebih optimal. Pada benda yang terlalu banyak, probabilitas benda sasaran akan semakin kecil karena banyaknya benda-benda lain yang memungkin juga untuk menjadi kandidat sebagai benda sasaran. Untuk itu diperlukan suatu upaya menyederhanakan lingkungan kerja robot agar fokusnya bisa lebih terarah dengan cara  membagi lingkungan yang terlalu ramai tersebut menjadi beberapa bagian. Salah satu patokan dalam membagi lingkungan tersebut adalah benda referensi. Penelitian ini akan menitik beratkan pada pembahasan dan peran benda referensi untuk menyederhanakan lingkungan yang terlalu ramai bagi kerja robot. Benda referensi akan ditentukan oleh robot sendiri dari fitur –fitur benda  dengan parameter-parameter yang telah ditentukan. Point penting dalam penelitian ini adalah bagaimana robot bisa dengan cerdas dalam menentukan kriteria benda  referensi apa  yang digunakan. Sebagai penentuan kluster untuk benda referensi digunakan metoda support vector machine sebagai panduan robot menentukan kelas dan fitur benda. Tujuan akhir yang diinginkan adalah terbentuknya sistem yang sederhana dalam padangan robot, Sederhana dalam pengertian ini adalah jumlah benda maksimal 3 buah.Kata Kunci : deteksi benda, support vector machine. benda referensi
Antena Mikrostrip Linear Array dengan Slot U untuk Internal Pesawat Televisi pada Band Frekuensi UHF Aditya Wardhani; Ikhwana Elfitri
JURNAL NASIONAL TEKNIK ELEKTRO Vol 7, No 1: March 2018
Publisher : Jurusan Teknik Elektro Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (759.391 KB) | DOI: 10.25077/jnte.v7n1.470.2018

Abstract

Television (TV) can be considered as the most popular information media. TV at Ultra High Frequency (UHF) normally has larger size of antenna than the TV terminal itself, and is usually connected as external equipment so that they are not suitable for portable TV terminal. In this paper, a 4-element linear array microstrip antenna with U-slot has been designed. Simulation with Zeland IE3D shows that the proposed antenna is capable of operating at frequency of 486 – 734 MHz (within overall UHF band) and has a relatively smaller size with dimension of 80 x 27 cm, hence it is suitable for TV with screen size larger than 32 inch. The results of the experiment also show that the antenna can achieve Gain higher than 3.5 dB.Keywords : Ultra High Frequency (UHF), Microstrip Antenna, U-SlotAbstrakTelevisi (TV) adalah salah satu media informasi yang sangat populer di masyarakat. Antena TV pada frekuensi UHF yang saat ini tersedia umumnya berukuran relatif besar dan dipasang di luar pesawat TV sehingga kurang cocok apabila diterapkan pada peralatan yang bersifat portable. Pada tulisan ini dirancang sebuah antenna mikrostrip dengan slot berbentuk U dan disusun secara linear array empat elemen. Hasil simulasi menggunakan perangkat lunak Zeland IE3D menunjukkan bahwa antena yang dirancang mampu bekerja pada rentang frekuensi 486 – 734 MHz (keseluruhan rentang frekuensi UHF) dan memiliki ukuran yang relatif kecil yakni 80 x 27 cm, sehingga cocok dipasang pada TV dengan ukuran minimal 32 inchi. Hasil simulasi juga memperlihatkan bahwa antena yang dirancang memiliki Gain lebih besar dari 3.5 dB.Kata Kunci : Ultra High Frequency (UHF), Antena Mikrostrip,U-Slot.
Perancangan dan Analisis Kinerja Steganography pada MPEG SAOC Menggunakan Improved Spread Spectrum Aggrivina Dwiharzandis; Amirul Luthfi; Ikhwana Elfitri
Jurnal RESTI (Rekayasa Sistem dan Teknologi Informasi) Vol 3 No 3 (2019): Desember 2019
Publisher : Ikatan Ahli Informatika Indonesia (IAII)

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (853.373 KB) | DOI: 10.29207/resti.v3i3.1356

Abstract

Object-based audio technology is important for audio reproduction because of providing the users with an ability to change the audio composition. As a result, MPEG Spatial Audio Object Coding (SAOC) as an international standard for encoding object-based audio has been widely used in many applications. However, the object-based audio transmission scheme is different than conventional audio transmission technology, so the use of steganography in MPEG SAOC needs to be further studied. In this work, a steganography technique has been developed based on Improved Spread Spectrum (ISS). There are two embedding configurations used in this study: embedding on MPEG SAOC audio objects and embedding on MPEG SAOC downmix signals. The performance of these two embedding configurations was analyzed by measuring ISS embedding capacity. As a comparison to the ISS method on channel-based audio, the ISS is also applied to Advanced Audio Coding (AAC). Based on the experiments, the embedding capacity of both proposed configurations varies depending on the bandwidth of audio signals. However, the downmix signal has a capacity of 20% higher than the audio objects. Moreover, the ISS embedding capacity on the MPEG SAOC downmix signal is similar to the embedding capacity on the AAC.
Analisis Kinerja Skema MPEG Surround Pada Pengkodean Audio 22 Kanal Menggunakan Bitrate 1000 - 2000 Kbps Ahmad Ridwan; Vitral JR; Habib Satria; Ikhwana Elfitri
Jurnal RESTI (Rekayasa Sistem dan Teknologi Informasi) Vol 5 No 5 (2021): Oktober2021
Publisher : Ikatan Ahli Informatika Indonesia (IAII)

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (697.689 KB) | DOI: 10.29207/resti.v5i5.3372

Abstract

MPEG surround is one of the most popular multichannel audio coding standards used today. In producing quality sound, there are several parts that are influential, but those that are directly related to sound reproduction, one of which is the method of downmixing, mixing the right channels will improve the quality of the sound produced. Because this research is closely related to data computing, the Matrix Laboratory (MATLAB) application is used. There are 2 stages carried out in the MATLAB application, namely the encoding and decoding process. In the encoding process in MATLAB, each audio channel is set according to a previously designed scheme. The results of this encoding are then decoded, so that the ODG value of each tested audio channel is obtained. In his presentation, the design and analysis of several domnmixing schemes was carried out. There are 5 schemes tested and to determine the performance of each scheme, these schemes are tested at high bitrates, from the range of 1000 Kbps to 2000 Kbps. Based on the test, it was found that the effect of increasing the bitrate is directly proportional to the resulting audio quality. During testing Scheme-5 has a better level of stability among all downmixing schemes and the average percentage increase in Objective Difference Grade (ODG) for all audio samples is 9.6927 %.
Skin and Clothes Matching Seeded by Color System Selection Rahmadi Kurnia; Meza Silvana; Ikhwana Elfitri
Indonesian Journal of Electrical Engineering and Computer Science Vol 14, No 3: June 2015
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

This work has designed an automated system to recommend clothe for people based on their skin. Skin colors from various races were relate with a variety of clothing colors to obtain their harmonization value. This research  involve  30 respondents through  questionnaire to provide initial views  to a variety of colors to match the skin color variation. Input from the respondents is then analyzed to choose the right color system to be linked with skin color. To determine the relationship between skin color and clothes color fuzzy logic rules were used. The system was then tested again to 30 respondents. The results showed that variations in skin color and clothing are best on a combination of Cr and Saturation. DOI:  http://dx.doi.org/10.11591/telkomnika.v14i1.7235 
Implementasi dan Pelatihan Pemanfaatan Teknologi Telekomunikasi dan Multimedia di Mushalla Al-Faizin Baharuddin Baharuddin; Ikhwana Elfitri; Rudy Fernandez; Hanalde Andre; Amirul Luthfi
Jurnal Andalas: Rekayasa dan Penerapan Teknologi Vol. 1 No. 2 (2021): Desember 2021
Publisher : Jurusan Teknik Elektro, Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (447.893 KB) | DOI: 10.25077/jarpet.v1i2.13

Abstract

Pemanfaatan teknologi informasi dan telekomunikasi (ICT) sebagai media promosi dan komunikasi di Indonesia sangat dibutuhkan. Kondisi ini memberi peluang kepada masyarakat untuk lebih memanfaatkan teknologi baik di gunakan pada instansi pemerintahan maupun swasta. Hal ini memberikan dampak yang signifikan terhadap kemajuan akan kreatifitas ICT untuk lebih dikembangkan. Pengunaan teknologi informasi dan telekomunikasi (ICT) terutama teknologi berbasis android dengan menggunakan internet merupakan cara yang inovatif dalam melaksanakan berbagai macam kreatifitas yang dapat dilakukan di berbagai sektor. Dengan memanfaatkan teknologi berbasis android, maka dapat dilakukan berbagai kegiatan secara elektronik seperti running text, media forum, email, mailing list dan berbagai aktifitas lainnya. Mushalla Alfaizin adalah tempat shalat berjamah yang dilakukan oleh sebagian kecil masyarakat yang terletak di RT 04 / RW 07 Aie Pacah Padang,  merupakan salah satu tempat ibadah umat muslim yang masih belum menggunakan teknologi berbasis android, sehingga proses mengupdate informasi belum dapat dilakukan dengan teknologi.  Agar Jamah Mushalla Alfaizin dapat juga merasakan perkembangan teknologi, maka tim pengabdian dari KBK telekomunikasi Jurusan Teknik Elektro Unand, memberikan pelatihan penggunaan teknologi berbasis android, berbentuk running text sebagai media update informasi kegiatan di Mushalla AlFaizin Aie Pacah. Running Text ini bertujuan untuk memudahkan jamah membaca perubahan setiap informasi, jika sewaktu waktu informasi ada yang terbaru.
Optimalisasi Antena Mikrostrip Tiga Pita Untuk Penerapan Pada WLAN dan WiMAX Muhammad Aditya Aditya Nikhaldo; Ikhwana Elfitri
Elektron : Jurnal Ilmiah Volume 14 Nomor 2 Tahun 2022
Publisher : Teknik Elektro Politeknik Negeri Padang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30630/eji.14.2.302

Abstract

Wired WLAN (Wireless Local Area Network) technology emerged as the most widely used network. WLAN is suitable for those who need internet. By using WLAN will be found various advantages for its users. Likewise with WiMAX (Worldwide Interoperability for Microwave Access) wireless technology, WiMAX basically has a function similar to WLAN, but with certain small differences. WLAN can cover one local area, in contrast to WiMAX which can cover a metropolitan area of ​​up to 50km. Antenna is an integral part of WLAN and WiMAX. This paper discusses a three-band microstrip antenna optimized for WLAN and WIMAX technology. The antenna consists of two layers of FR4 (epoxy) printed circuit board (PCB) with a thickness (h) of 1.6 mm, a dielectric constant (εr) of 4.4, and a dielectric loss factor (tan) of 0.02 with dimensions of 35 mm × 48 × 1.6 mm . This antenna is simulated using CST software. The design of the Studio Suite 2018 antenna is done by adjusting the size of the slot spacing, the length of the slot, the size of the ground clearance, and the size of the board length. In this antenna design, the slot size can be increased on the left side of the patch to increase the slot pitch for a deeper return loss, and the right side of the patch to increase the slot pitch for a shorter return loss. The results in the simulation process obtained good working frequency, bandwidth and return loss, the antenna can operate at the expected frequencies, namely 2.4 GHz, 3.2 GHz, 5.1 GHz with a return loss of -42 dB, -44 dB, - 31 dB. Bandwidths 114.4 MHz, 121.2MHz and 287.9MHz.
Pelatihan dan Implementasi Pemanfaatan Teknologi Telekomunikasi dan Multimedia di Mushalla Al-Mahira Baharuddin Baharuddin; Ikhwana Elfitri; Rudy Fernandez; Hanalde Andre; Amirul Luthfi; Rizki Wahyu Pratama; Zurnawita Zurnawita; Firdaus Firdaus; Intan Aprilia Ikhsan
Jurnal Andalas: Rekayasa dan Penerapan Teknologi Vol. 2 No. 2 (2022): Desember 2022
Publisher : Jurusan Teknik Elektro, Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/jarpet.v2i2.31

Abstract

Pemanfaatan teknologi informasi dan telekomunikasi (ICT) perancangan, implementasi, pengembangan, dukungan atau manajemen sistem informasi berbasis komputer terus pada aplikasi perangkat keras atau hardware dan perangkat lunak atau software, sebagai media promosi dan komunikasi di Indonesia sangat dibutuhkan. Pelaksanaan kegiataan ini, merupakan kelanjutan dari program departemen teknik elektro untuk pengabdin berbasis KBK. Pada kegiatan ini, diaksanakan pelatihan penggunaan media informasi berbasis android yaitu berupa running text yang digunakan untuk mengupdate informasi kondisi mushalla di Almahira. Pengunaan teknologi informasi dan telekomunikasi (ICT) terutama teknologi berbasis android dengan menggunakan internet merupakan cara yang inovatif dalam melaksanakan berbagai macam kreatifitas yang dapat dilakukan di berbagai sektor. Dengan memanfaatkan teknologi berbasis android, maka dapat dilakukan berbagai kegiatan secara elektronik seperti running text, media forum, email, mailing list dan berbagai aktifitas lainnya. Mushalla Al Mahira adalah tempat shalat berjamah yang dilakukan oleh sebagian kecil masyarakat yang terletak di RT 01 / RW 07 Aie Pacca Padang, merupakan salah satu tempat ibadah umat muslim yang masih belum menggunakan teknologi berbasis android, sehingga proses mengupdate informasi belum dapat dilakukan dengan teknologi. Agar Jamah Mushalla Al Mahira dapat juga merasakan perkembangan teknologi, maka tim pengabdian dari KBK telekomunikasi Jurusan Teknik Elektro Unand, memberikan pelatihan penggunaan teknologi berbasis android, berbentuk running text sebagai media update informasi kegiatan di Mushalla Al Mahira Aie Pacca. Running Text ini bertujuan untuk memudahkan jamah membaca perubahan setiap informasi, jika sewaktu waktu informasi ada yang terbaru.