Garuda - Garba Rujukan Digital

Sistem Akses Masuk Perpustakaan Menggunakan Sistem Pengenalan Wajah dan Pengukuran Suhu Tubuh Berbasis Single Board Computer (Studi Kasus Perpustakaan Unand) Shalsabilla Syaqila; Dodon Yendri
CHIPSET Vol. 3 No. 02 (2022): Journal on Computer Hardware, Signal Processing, Embedded System and Networkin
Publisher : Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/chipset.3.02.131-145.2022

The library is one of the facilities used as a place to obtain information, improve literacy, and develop knowledge and insight. The level of security that is still lacking causes the high threat of crime caused and the spread of the virus which is still difficult to control, so this research was carried out by forming a system that could facilitate entry with facial recognition and body temperature measurement to improve the security system and be able to suppress the spread of the virus.The system will open a portal for entry access when the face image is recognized with a normal body temperature without any physical contact, while when the face is not recognized the system will provide a notification that the detected face image is not recognized.

Rancang Bangun Sistem Pembersih Kotoran Otomatis pada Kandang Kelinci Berbasis IoT (Internet Of Things) Dedi Hermanto; Dodon Yendri
CHIPSET Vol. 3 No. 02 (2022): Journal on Computer Hardware, Signal Processing, Embedded System and Networkin
Publisher : Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/chipset.3.02.146-154.2022

Rabbits have their charm for breeding because of the benefits they get from rabbits. However, rabbit farming has a fairly high challenge, namely rabbits die easily because of the cleanliness of the cage. The accumulation of rabbit droppings results in increased levels of ammonia gas which are harmful to rabbits, breeders, and even the environment. In cleaning the cage, rabbit breeders still use manual methods that are ineffective and inefficient. For this reason, a systemwas created to create an automatic feces cleaning system in the rabbit cage based on IoT (Internet of Things) by utilizing loadcell sensors to detect the weight of rabbit droppings that are accommodated on the conveyor belt. Belt conveyor as a medium that transports rabbit droppings. The MQ-135 sensor is used to detect the concentration of ammonia gas and the MCUESP8266 Node as a controller and IoT as a notification and as a system control via a smartphone. Based on testing of the system, the loadcell sensor as a measure of the weight of rabbit droppings has an accuracy rate of 97.43%. The MQ-135 sensor as a measure of theconcentration of ammonia gas in rabbit cages has an accuracy rate of 99.19%. The conveyor belt can move to dispose of rabbit droppings when the weight is > 1000 grams or the ammonia gas content is > 25 ppm. Then the Telegram application bot can 100% control the system by inputting commands and can receive notifications from the system. From testing the system as a whole, the system can work according to the desired function with a 100% success rate.

Rancang Bangun Pelembab Udara Ruangan (Humidifier) berbasis Mikrokontroler Aina Nurul Fitri; Dodon Yendri
CHIPSET Vol. 4 No. 01 (2023): Journal on Computer Hardware, Signal Processing, Embedded System and Networkin
Publisher : Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/chipset.4.01.61-70.2023

Kualitas udara ruangan menjadi sangat penting sebagai lingkungan mikro yang berkaitan dengan resiko dari pencemaran udara. Kelembaban udara merupakan salah satu faktor yang mempengaruhi kualitas fisik udara ruangan. Kelembaban yang terlalu tinggi maupun rendah dapat menyebabkan suburnya pertumbuhan mikroorganisme. Kelembaban udara ruangan yang ideal berada pada rentang 40% - 60% Rh. Humidifier merupakan alat yang digunakan untuk pelembab ruangan yang bekerja dengan cara menyemprotkan uap air ke udara. Dirancanglah sebuah sistem humidifier yang hidup secara otomatis dimana dapat mendeteksi kelembaban ruangan, pendeteksian orang dan memonitoring ketinggian air di dalam sistem serta menampilkan hasil informasi pada LCD dan aplikasi. Penelitian ini menggunakan sensor DHT11 untuk mendeteksi kelembaban ruangan, sensor PIR untuk mendeteksi keberadaan seseorang, sensor ultrasonik untuk mendeteksi ketinggian air pada wadah dan menampilkan data hasil sensor pada aplikasi android. Dari penelitian ini dihasilkan, sistem dapat berhasil mengaktifkan dan mengnonaktifkan ultrasonic mist maker berdasarkan hasil pengukuran kelembaban ruangan menggunakan sensor DHT11 dengan persentase keberhasilan 98,99%. Sistem berhasil mendeteksi gerakan orang menggunakan sensor passive infrared dalam jarak 150 cm dengan jangkauan sudut 40 Ëš sampai 140 Ëš. Serta pengukuran ketinggian air menggunakan sensor ultrasonik dengan tingkat keberhasilan sebesar 99,85% dan berhasil memberikan peringatan berupa mengaktifkan buzzer dengan persentase tingkat keberhasilan 100%.

Alat Kandang Kucing Otomatis Berbasis Mikrokontroler dengan Monitoring Telegram Muhammad Ridho Heranof; Dodon Yendri
CHIPSET Vol. 4 No. 01 (2023): Journal on Computer Hardware, Signal Processing, Embedded System and Networkin
Publisher : Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/chipset.4.01.71-79.2023

Pada penelitian ini alat kandang kucing otomatis bertujuan untuk memudahkan pemilik kucing yang dalam memelihara kucing dan memonitoring kucing apabila berada di dalam atau diluar kandang serta dapat memberi makan kepada kucing dengan jadwal yang sudah diatur dari aplikasi telegram. Pada penelitian ini digunakan sensor ultrasonik untuk mendeteksi kucing saat di depan kandang dengan jarak yang ditentukan dan module ESP 01 sebagai kalung yang dipakai oleh kucing untuk mendeteksi kucing yang dipelihara, sensor PIR untuk mendeteksi kucing sudah masuk atau keluar dari kandang. Di dalam kandang terdapat alat pakan kucing otomatis menggunakan motor servo untuk menjatuhkan pakan dan sensor load cell untuk menimbang pakan yang turun. Keluaran dari sistem dalam peneliatan ini adalah notifikasi telegram. Jika kalung kucing terdeteksi dan kucing berdiri di depan kandang dengan jarak dari 20cm hingga 50cm maka pintu kandang akan terbuka, dan kucing masuk akan dideteksi dengan sensor PIR. Dalam penelitian ini, pengujian pada saat kucing masuk kandang dengan jarak yang tidak sesuai dan kucing yang tidak menggunakan kalung module ESP 01 untuk mengecek pintu tetap terbuka atau tidak dan alat pakan kucing dengan pengujian waktu respon dari telegram serta banyak pakan yang turun sesuai dengan inputan yang diberikan dari telegram. Dapat disimpulkan bahwa alat bekerja dengan tingkat error yang berbeda-beda pada setiap komponen.

Rancang Bangun Sistem Analisa Biaya Manfaat Ternak Sapi Berdasarkan Berat Badan Sapi Emyr Riyanda Azra; Dodon Yendri; Adrizal
CHIPSET Vol. 4 No. 02 (2023): Journal on Computer Hardware, Signal Processing, Embedded System and Networkin
Publisher : Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/chipset.4.02.93-106.2023

Cattle fattening proccess is very important to increase the weight of cattle before being sold. However, there are many traditional breeders looking for cows that have reached puberty, but the cow's body is still thin. This could be due to the absence of records in monitoring the weight growth of cows so that feeding becomes less precise. Based on these problems, a system was designed that helps farmers in managing their livestock management by recording the progress of each beef cattle that are kept, regulating cattle feeding so that it is more optimal, and knowing the cost benefits of cattle that are kept based on the growth of cow body weight. This system uses two load cells to weigh cows. The weight of the weighed cow can be stored in the web application database. The main function of this system is to be able to calculate and display the cost of benefits of cattle based on the growth of the cow's body weight. Based on the tests carried out, the system can weight cows using two 500kg load cells with an error value of 3.61%. The system can check cow data using keypad input with an average time of 3.99 seconds and store cattle data in the database with an average time of 4.99 seconds. The system can calculate the cost of cow feed needs in one month and income due to changes in cow weight with a 100% success rate.

Sistem Wi-Fi Coin untuk Optimasi Akses Internet dan Bisnis di Desa Wisata Sanjai Bukittinggi Arrya Anandika; Rifki Suwandi; Rian Ferdian; Tati Erlina; Ratna Aisuwarya; Budi Rahmadya; Dodon Yendri; Rizka Hadelina; Nefy Puteri Novani; Desta Yolanda
Warta Pengabdian Andalas Vol 30 No 4 (2023)
Publisher : Lembaga Penelitian dan Pengabdian kepada Masyarakat (LPPM) Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/jwa.30.4.822-836.2023

The problem that occurs in Sanjai Tourism Village is inadequate internet access. Internet access is fundamental nowadays, both in daily activities and in the context of promotional activities for Tourism Villages to attract visitors. One of the aspects of assessing the Indonesian Tourism Village Award is digital creativity. To make this happen, it is necessary to have internet access that everyone can enjoy, including the community, visitors, and the Tourism Village group (Pokdarwis) in the Sanjai Tourism Village. Therefore, in Community Service activities, a Wi-Fi Coin system was designed to improve internet access in the Sanjai Tourism Village. The Wi-Fi Coin System uses coins to access the internet. In addition, the Wi-Fi Coin system can be portable for use in the desired location. The method used consists of three stages: preparation consisting of a survey and needs analysis to obtain data on community needs, especially the Sanjai Tourism Village Pokdarwis. The implementation consists of system design, testing, and implementation. System design and testing were carried out at the Unand Computer Engineering Department. Meanwhile, the implementation was done directly before the Pokdarwis team and the Village Community. Trials and equipment handover to the Sanjai Tourism Village Pokdarwis marked the activity results.

PENGEMBANGAN POTENSI EKOWISATA BERBASIS MASYARAKAT DI NAGARI KANDANG BARU KABUPATEN SIJUNJUNG PROPINSI SUMATERA BARAT Rani Pratama Putri; Dodon Yendri
BULETIN ILMIAH NAGARI MEMBANGUN Vol. 2 No. 3 (2019)
Publisher : LPPM (Institute for Research and Community Services) Universitas Andalas Padang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/bina.v2i3.151

Kandang Baru is one of 61 development villages in Sijunjung Regency, West Sumatra Province. The location is very strategic on the trans-Sumatra road, which is the main route connecting the provinces of West Sumatra and Jambi so that it supports the potential and bright prospects in developing economic and socio-cultural development, especially in the tourism sector. This village has good tourism and natural resource potential but has not been exploited either by the government or the local community. With the 2019 PPM Andalas University KKN activities aimed at developing human resources and community empowerment efforts through various creative and innovative work programs, it is expected that the potential can be developed. This activity is carried out with a causal method, which is to carry out work programs based on a SWOT analysis of problems that occur, such as low levels of education, low welfare of the population, conditions of primary schools that are expected, and so on. The results of this activity are summarized in physical and non-physical forms. Physically KKN students succeeded in initiating the construction of the Bukit Capang Tigo geopark tourism area gate (BCT) and have stood beautifully in the area, holding a reading park for elementary students by utilizing the nagari library and other programs. Non-physically, character building is carried out through tutoring, fostering camp tahfidz, and non-physical tourism development in BCT geopark tourism promotion by utilizing social media @KandangBaru Traveling through KKN activities conducted for 40 days, students have succeeded in contributing to Kandang New as a form of community service.

Sistem Wi-Fi Coin untuk Optimasi Akses Internet dan Bisnis di Desa Wisata Sanjai Bukittinggi Arrya Anandika; Rifki Suwandi; Rian Ferdian; Tati Erlina; Ratna Aisuwarya; Budi Rahmadya; Dodon Yendri; Rizka Hadelina; Nefy Puteri Novani; Desta Yolanda
Warta Pengabdian Andalas Vol 30 No 4 (2023)
Publisher : Lembaga Penelitian dan Pengabdian kepada Masyarakat (LPPM) Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/jwa.30.4.822-836.2023

The problem that occurs in Sanjai Tourism Village is inadequate internet access. Internet access is fundamental nowadays, both in daily activities and in the context of promotional activities for Tourism Villages to attract visitors. One of the aspects of assessing the Indonesian Tourism Village Award is digital creativity. To make this happen, it is necessary to have internet access that everyone can enjoy, including the community, visitors, and the Tourism Village group (Pokdarwis) in the Sanjai Tourism Village. Therefore, in Community Service activities, a Wi-Fi Coin system was designed to improve internet access in the Sanjai Tourism Village. The Wi-Fi Coin System uses coins to access the internet. In addition, the Wi-Fi Coin system can be portable for use in the desired location. The method used consists of three stages: preparation consisting of a survey and needs analysis to obtain data on community needs, especially the Sanjai Tourism Village Pokdarwis. The implementation consists of system design, testing, and implementation. System design and testing were carried out at the Unand Computer Engineering Department. Meanwhile, the implementation was done directly before the Pokdarwis team and the Village Community. Trials and equipment handover to the Sanjai Tourism Village Pokdarwis marked the activity results.

Optimizing Tourism Potential and Superior Products of Sanjai Tourism Village Through Website Design and Implementation Rifki Suwandi; Arrya Anandika; Rian Ferdian; Tati Erlina; Ratna Aisuwarya; Budi Rahmadya; Dodon Yendri; Werman Kasoep; Rahmi Eka Putri; Nefy Puteri Novani; Desta Yolanda; Rizka Hadelina
Warta Pengabdian Andalas Vol 32 No 1 (2025)
Publisher : Lembaga Penelitian dan Pengabdian kepada Masyarakat (LPPM) Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/jwa.32.1.61-70.2025

The use of technology is fundamental in the digital era. Adjustment and transformation are essential activities to keep up with technological developments. One of the uses of technology is product marketing and promotion. Sanjai Tourism Village, located in Bukittinggi City, is one of the villages where marketing and promotion of tourism products are still carried out using conventional promotional methods such as through newspapers, radio advertisements, posters, and distribution of brochures. This method is still limited and cannot reach a broader scope. Therefore, to compete in the digital era, there needs to be a transformation of promotion and marketing of tourism products through the internet media using a website. Information about promoting and marketing tourism products can be done digitally and online using a website. The results of advertising and marketing tourism village products by utilizing the website can be spread and known to the public with a broader reach. Therefore, in the community service activities of the Unand Computer Engineering Department, the Sanjai Tourism Village website was built with a method consisting of several stages, such as coordination, surveys, design, website implementation, improvement, and submission of the website to Sanjai Tourism Village. Each stage has been carried out, and a website has been produced with features such as a homepage, profile, tourism products of various fields, news and activities, and contacts.

Sistem Pemesanan Makanan dan Minuman Pada Restoran Menggunakan Teknologi NFC Berbasis Android Putri, Annisa Yolanda; Yendri, Dodon
JITCE (Journal of Information Technology and Computer Engineering) Vol. 2 No. 01 (2018)
Publisher : Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/jitce.2.01.34-40.2018

One area of business that is in great demand today is the culinary field. The culinary field is very mushrooming because it deals with meeting basic human needs. Therefore service to digital needs to be a concern. The goal is to improve services with NFC (Near Field Communication) based on Android for ordering food and drinks. This research uses experimental research methods by applying NFC that is on smart phones as a way to bring the smart phone closer to the NFC tag that is already on each table. Message data entered on a mini PC computer (Raspberry Pi) as the server for the next as a booking order that will be ordered by the waiter. Simulation show that a system can read NFC tags and find out table numbers via a smart phone with a 100% success rate, remote reading of NFC tags by smart phones is 2.5 cm and the average time by the system is 1,12 seconds. Besides that, the system is also equipped with calculations for payments with 100% accuracy.

Title

Found 41 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 41 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 41 Documents
Search