Claim Missing Document
Check
Articles

IMPLEMENTATION OF FACE RECOGNITION USING GEOMETRIC FEATURES EXTRACTION Risanuri Hidayat; Muhammad Oka Bagus Wibowo; Brama Yoga Satria; Anggun Winursito
Jurnal Ilmiah Kursor Vol 11 No 2 (2021)
Publisher : Universitas Trunojoyo Madura

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21107/kursor.v11i2.284

Abstract

The face is among the biometric objects used to recognize one’s identity. There are various face recognition system methods that can be applied, one of which is geometric features-based face recognition. Geometric features are unique features extraction of one’s facial components. These features are obtained by calculating the comparison values of the distance measurement between facial components served as a reference like eyes, nose, and mouth. This research implemented a face recognition system using the geometric features method on a significantly low-spec computer system. This implementation was carried out by building a system, installing it on a computer system, and then testing it using laptops or computer devices and the camera web. The face recognition system would process the facial input images, extract their geometric features, and match the results with the data stored in the database. The research results were a low-spec computer system that could recognize its users by providing real-time feedback in the form of users’ names with an accuracy of 98%.
Analysis of the Indonesian Vowel /e/ For Lip Synchronization Animation Anung Rachman; Risanuri Hidayat; Hanung Adi Nugroho
Proceeding of the Electrical Engineering Computer Science and Informatics Vol 4: EECSI 2017
Publisher : IAES Indonesia Section

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (780.062 KB) | DOI: 10.11591/eecsi.v4.1035

Abstract

Currently, voice recognition technology is widely used to produce lip sync animation. Vowels take the most dominant roles for lip sync animation as it always exists in every syllable. Therefore, it is necessary to select appropriate vowel traits for the system to be accurate. In general, there are five vowels of Indonesian language, namely /a/ /i/ /u/ /e/ and /o/. However, there are two vowels that contain several different tones: /o/ that are pronounced /o/ and /O/, and /e/ that are pronounced /e/, /ǝ/, and /ɛ/. The difference in tone can affect the accuracy of voice recognition on the lip sync animation system if it is not specified further. In this paper, the characteristic values of vowel /e/, /ǝ/, and /ɛ/ are compared and analyzed to find the significance of the difference. The sought characteristic values are the frequency of the formant (F1, F2, and F3) through the Praat software used to extract the features. Comparison is done using a statistical test of t-test. The results show that the three vowel tones /e/ have significant differences for all of F1 and most of F2
ESTIMASI FUNGSI SPASIAL PADA IDENTIFIKASI FITUR WAJAH Akhyar Akhyar; Risanuri Hidayat; Bimo Sunarfri Hantono
Prosiding SNATIF 2017: Prosiding Seminar Nasional Teknologi dan informatika (BUKU 2)
Publisher : Prosiding SNATIF

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Abstrak Penelitian ini untuk mengidentifikasi fungsi spasial pada 5 titik fitur wajah dengan metode PCA dan Viola-Jones. Pencahayaan mempengaruhi tingkat identifikasi wajah menggunakan PCA. Metode Viola-Jones relatif mendapatkan hasil yang cepat, akurat, dan efisien dalam melakukan deteksi wajah pada gambar. Dalam penelitian ini mendapatkan nilai akurasi sistem deteksi wajah sebesar 95%. Hasil yang didapatkan dengan posisi wajah terkena cahaya menentukan keberhasilan deteksi wajah tersebut. Kata kunci: 3D, Edgedetection, Pencocokan  
MENENTUKAN DAMPAK RESIKO KEAMANAN BERBASIS PENDEKATAN OWASP Robertus Halomoan Hutagalung; Lukito Edi Nugroho; Risanuri Hidayat
Prosiding SNATIF 2017: Prosiding Seminar Nasional Teknologi dan informatika (BUKU 1)
Publisher : Prosiding SNATIF

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Abstrak Menemukan celah keamanan adalah hal yang penting, tetapi dapat untuk memperkirakan resiko yang ada terhadap bisnis juga sama pentingnya. Pada awal siklus kebanyakan orang mengidentifikasi masalah keamanan pada arsitektur atau desain menggunakan model ancaman. Setelah itu, beberapa orang mencari masalah keamanan dengan menggunakan code review atau uji penetrasi. Atau masalah tidak akan ditemukan hingga aplikasi sudah masuk tahap produksi atau hingga aplikasi sudah diretas. Pada penelitian ini diimplementasi mekanisme metode asesmen resiko aplikasi menggunakan metode Open Web Application Security Project (OWASP) Risk Rating untuk asesmen keamanan pada aplikasi berbasis website. Penelitian ini menghasilkan tingkat resiko pada aplikasi berbasis website yang ada di dalam server Departemen Teknik Elektro dan Teknologi Informasi Universitas Gadjah Mada (DTETI UGM) menggunakan pendekatan OWASP.  Kata kunci: Asesmen Keamanan, Penilaian Resiko, Dampak Resiko
Speech Recognition for Cleft Lip and Palate Voice and Standard Voice for Consonant Words /B/ Akhmad Anggoro; Samiadji Herdjunanto; Risanuri Hidayat
SENATIK STT Adisutjipto Vol 5 (2019): Peran Teknologi untuk Revitalisasi Bandara dan Transportasi Udara [ISBN 978-602-52742-
Publisher : Institut Teknologi Dirgantara Adisutjipto

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.28989/senatik.v5i0.325

Abstract

Advances in technology make speech recognition improve. But does speech recognition recognize the sounds of cleft lip and palate? this research uses the voice of cleft lip and palate to normal voice. With the letter / b / which is the letter for lip articulation. Words used include Clothes, Ash and Moist. The extraction method uses Mel Frequency Cepstral Coefficients (MFCC), the classification uses K-Nearest Neighbor (KNN) with K-Fold Cross-Validation as a test. The results show the accuracy above 70%. 75% in the word "Baju". 75% in the word "Abu". 83% in the word "Lembab".
Identifikasi Pengaruh Lintasan-Jamak pada DVB-T2 Berdasar Uji Penerimaan Siaran Budi Setiyanto; Risanuri Hidayat; I Wayan Mustika; Sunarno
Jurnal Nasional Teknik Elektro dan Teknologi Informasi Vol 5 No 2: Mei 2016
Publisher : Departemen Teknik Elektro dan Teknologi Informasi, Fakultas Teknik, Universitas Gadjah Mada

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1501.883 KB)

Abstract

In many countries, migration from analog to digital in television (TV) broadcasting technology is being in progress. Indonesia has adopted DVB-T2 (Digital Video Broadcasting-Terrestrial Second Generation) as the standard of free-to-air digital TV (DTV) broadcasting system. Frequency selective fading due to multipath propagation affects the reception of this terrestrial radio communication system. This paper presents those effects on reception of DVB-T2 signal from the Yogyakarta transmitting stations. The presence of these effects were identified experimentally, based on several received-signal describing quantities obtained from some field-observations on indoor/outdoor stationary/mobile receptions. Examples of these quantities are spectrum flatness measurement (SFM), signal quality (SQ) versus signal intensity (SI), power level (P) versus carrier-to-noise ratio (CNR), CNR versus modulation error ratio (MER), local variation of reception-success, and received data packet. Several numerical examples are: (1) SFM achieved as high as about 0.7 and 0.9 for indoor and outdoor, respectively, and (2) spatial-probability of reception-success at an indoor receiver location varied from 40,06 % to 81,85 %, approximately.
Rekonstruksi Objek 3D dari Multiple Images Rachmawati; Risanuri Hidayat; Sunu Wibirama
Jurnal Nasional Teknik Elektro dan Teknologi Informasi Vol 2 No 1: Februari 2013
Publisher : Departemen Teknik Elektro dan Teknologi Informasi, Fakultas Teknik, Universitas Gadjah Mada

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1115.087 KB)

Abstract

3D reconstruction is a task of recovering 3D geometry and color information. There are two categories of 3D object reconstruction: active method, 3D model acquisition can be performed by laser scanner or structured light. Passive methods, reconstruct 3D models by image sequences from a single camera or multiple cameras. Object scanning often demand expensive equipment and special skill to operate. As a simple and low cost approach, 3D reconstruction based images became more popular among the researches. In this study apply passive reconstruction technique, the reconstruction of 3D objects made using images taken from different viewpoint leading to the same object using a digital camera.To determine the corresponding points of the two views used epipolar geometry and Direct Linear Triangulation algorithm (DLT). All required parameters are extracted from the image itself, without any calibration of the camera before. The reconstruction process can divided into four part: first, feature point extraction. Second estimate the fundamental matrix from point correspondences, third compute the camera matrix, and the end compute 3D point from image points. All the required parameters are recovered from the images. As objects of experiment used a miniatur of a statue. Experiment result show the residual error from estimation fundamental matrix is 9.9051 x10-04, and reprojection error 1.714 x 10-03 pixel. Visually, the reconstructed 3D model reseamble the shape of the original object.
Rekonstruksi dan Visualisasi Objek 3-D Berbasis Algoritma Direct Linear Transformation Sunu Wibirama; Risanuri Hidayat
Jurnal Nasional Teknik Elektro dan Teknologi Informasi Vol 1 No 2: Mei 2012
Publisher : Departemen Teknik Elektro dan Teknologi Informasi, Fakultas Teknik, Universitas Gadjah Mada

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1205.227 KB)

Abstract

Visual reconstruction and modeling of three dimensional (3-D) object is an emerging research topic in computer vision and photogrammetry fields. Nowadays, many commercial products are developed to obtain 3-D model of rigid object, starting from small ancient heritages to city landscape. Such commercial tools are very expensive and not accessible for education and research purpose. This paper aims to present a low-cost approach to generate a 3-D model from geometry of multiple two-dimensional (2-D) images using consumer-level Digital Single Lens Reflection (DSLR) camera. Direct Linear Transformation (DLT) algorithm was used to obtain 3-D point cloud. Texturization of 3-D object was generated by implementing Convex Hull and Random Sample Consensus (RANSAC) algorithms. Experimental result of small Merlion Singapore statue and large Herz-Jesu building shows that the proposed low-cost method is able to visually reconstruct small and large objects by using 10-20% feature points detected on 2D images.
Unjukkerja Standar ZigBee pada WPAN dengan Topologi Mesh Eka Wahyudi; Risanuri Hidayat; Sujoko Sumaryono
Jurnal Nasional Teknik Elektro dan Teknologi Informasi Vol 1 No 2: Mei 2012
Publisher : Departemen Teknik Elektro dan Teknologi Informasi, Fakultas Teknik, Universitas Gadjah Mada

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (64.503 KB)

Abstract

ZigBee standard can be used in wireless sensor networks (WSN) with a mesh topology. WSN which formed WPAN that uses ZigBee standard has the capability to thousands of WSN devices can be combined in a single WPAN. With that ability need to do testing WPAN performance parameters to get the number of WSN devices for the best performance in mesh topology. Using simulation program, the research measure throughput, traffic (sent, receive and drop), delay and hop number parameters. Testing about the influence of the number of WSN devices is done by running a simulation of the 20 kind WPAN where every WPAN has one WSN gateway and the number of WSN devices ranging from 5 and increasingly by 5 to reach the 100 WSN devices in a single WPAN. The results showed that WPAN performance with ZigBee standard in mesh topology has the best conditions when the maximum number WSN devices achieve 20 WSN devices.
Pengujian Jarak dan Waktu Gabung Protokol IEEE 802.15.4 / ZigBee di Lingkungan Indoor Koko Joni; Risanuri Hidayat; Sujoko Sumaryono
Jurnal Nasional Teknik Elektro dan Teknologi Informasi Vol 1 No 2: Mei 2012
Publisher : Departemen Teknik Elektro dan Teknologi Informasi, Fakultas Teknik, Universitas Gadjah Mada

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (352.395 KB)

Abstract

Protocol IEEE 802.15.4/ZigBee is a standard for low power personal network. This paper discusses about router, end device and coordinator using ZigBee protocol in term of distance and time to join. Testing carried out by pairing and On/Off method that constitute communication model from router or end device to coordinator. The result showed that with pairing methods could far distance until outside building with further distance about 65 meters, while the distance using On/Off method can reach few room in indoor area. Longest time to join need about 1 minute 15 seconds. Compare with pairing method that always connected, On/Off method need more time to connect in ZigBee Network.