Claim Missing Document
Check
Articles

Found 8 Documents
Search

THE IMPLEMENTATION OF DEMONSTRATION METHOD TOWARD STUDENT LEARNING OUTCOMES IN BASIC PHYSICS II Azizahwati Azizahwati; Widya Laila; Riri Nasirly
Jurnal Geliga Sains: Jurnal Pendidikan Fisika Vol 6, No 1 (2018)
Publisher : Program Studi Pendidikan Fisika FKIP Universitas Riau

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (158.665 KB) | DOI: 10.31258/jgs.6.1.26-30

Abstract

This study was aimed to describe the basic physics II learning result of students of Industrial Engineering of Pelalawan Institute of Technology on the electicity material. The subject in this study were the second semester students of Industrial Engineering of Pelalawan Institute of Technology academic year 2017/2018. The instrument which was used to collect the data was the test given after the implementation of the demonstration method. The data was analyzed by using descriptive analysis technique which include student's mastery level. The results of data analysis showed that student learning outcomes were categorized good. The Implementation of demonstration method can improve student learning outcomes on the concept of electricity.
AKUISISI TEKNOLOGI EKSTERNAL DAN KINERJA PERUSAHAAN Widya Laila; Aris Fiatno
Jurnal Teknik Industri Terintegrasi Vol. 2 No. 1 (2019): Mei
Publisher : Research Center University of Pahlawan Tuanku Tambusai

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31004/jutin.v2i1.262

Abstract

In the business world, technology owned by a company is an infrastructure that is very important in supporting the company's efforts to increase profits. The current global business trend is encouraging company managers to move away from the trend of building their own technology needed to become a trend to get technology through collaboration with other companies because it can reduce expensive research costs, stimulate the innovation process to be able to fulfill requests that will ultimately improve the performance produced. his study proposes a model that can be used to analyze the contribution of external technology acquisition to company performance External technology acquisition contributes positively to company performance, and this contribution is strengthened by the moderator effect of internal R & D effort. Investment in internal R & D effort does not only stimulate the occurrence of innovation processes that will be needed to produce good performance but also strengthen the company's absorptive capacity. Absorptive capacity is needed to strengthen the company's ability to learn the latest knowledge and technology
KAJIAN PERBAIKAN POSTUR KERJA DENGAN METODE OWAS (OVAKO WORKING POSTURE ANALYSIS SYSTEM) (Studi Kasus di Pabrik Roti Cimpago Putih) meldia fitri; Widya Laila
Jurnal Sains dan Teknologi: Jurnal Keilmuan dan Aplikasi Teknologi Industri Vol 17, No 2 (2017): JURNAL SAINS DAN TEKNOLOGI
Publisher : Sekolah Tinggi Teknologi Industri Padang

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (247.16 KB) | DOI: 10.36275/stsp.v17i2.73

Abstract

The roles of human as workers are still dominant in conducting production process, especially that related to manual activities. One of the humans rote is in the procss of displacing  materials. These activities potentially raise various camplaints such as muscle pain and could cause accident at work. Pabrik Roti Cimpago Whit Bread still conduct MMH (Manual Materials Handling) activites in producing bread. These make  the workers get low back pain. Theis research seeks to identify and evaluate inappropriate body posture at work and recommend safe body posture for the workers by using OWAS (Ovako Working Posture Analysis System). Analysis syetem through which 7 working posture were corrected of the 7, 4 posture were classified into category 2 suggerting that they were dangerous for musculoskeletal sytem and 3 postures were classified into category 3 indicating that they were unsafe for musculoskeletal and needed immediate repair. Keywords: work posture, OWAS, improvement work posture.
Penentuan Jumlah Kebutuhan Tenaga Kerja pada Stasiun Kerja Composer Dengan Menggunakan Metode Work Sampling di PT. Asia Forestama Raya Fiky Two Nando; Widya Laila
Journal of Engineering Science and Technology Management (JES-TM) Vol. 2 No. 2 (2022): September 2022
Publisher : Journal of Engineering Science and Technology Management

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31004/jestm.v2i2.43

Abstract

The purpose of this study was to determine the average productive percent of operators so that they can determine the standard time required for operators to carry out their work at PT. Asia Forestama Raya Composer station, and to find out the amount of manpower needed at this station.  The method used in this study is the Work Sampling Method, this method is a work technique to conduct a large number of observations on the work activities of machines, processes and workers or operators. The sample used in this study were workers or operators at the Composer work station. Composer work station is a work station consisting of 12 Cast Builder machines with each machine consisting of 5 operators, the work of this station is to connect plywood sheets according to standard sizes. Based on the results of data processing that has been carried out in this study, it can be concluded that the average working productive percent of all operators is 94.087%. The standard time required for the work process on the Cor Builder machine is 11.3 minutes/m3, and the amount of labor required at the Composer work station initially amounted to 5 people (with details of 2 people as Cor Builder machine operators, 2 people as repair as well as inspection, and 1 person as waste disposal), to 7 people (with details of 2 people as Cor Builder machine operators, 4 people as repair and inspection, and 1 person as waste disposal.
Perancangan Mesin Pencacah Tandan Kosong Kelapa Sawit Nasirly, Riri; Kurnia, Anggi Rada; Laila, Widya; Arsi, Fadli; Rahmad, Nuraini; Larasati, Tengku Indira
Kohesi: Jurnal Sains dan Teknologi Vol. 2 No. 5 (2024): Kohesi: Jurnal Sains dan Teknologi
Publisher : CV SWA Anugerah

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.3785/kohesi.v2i5.2082

Abstract

Indonesia is one of the world's largest suppliers of palm oil needs. Increasing the area of oil palm plantations followed by CPO production does not always have a positive impact, especially related to waste. Palm Oil Empty Bunches (EFB) is one of the largest wastes generated from the palm oil processing industry, where the amount reaches 21-23% of fresh fruit bunches. So far, the use of empty oil palm bunch waste is very limited, namely landfilled (open dumping) and burned. One of the uses of waste from TKKS is as fertilizer The initial stage to be able to make EFB compost is by enumerating EFB to accelerate decomposition. So that shredding technology is needed in the process of making EFB compost. Most of the Palm Oil Industry has used large capacity shredding machines. However, for small farmers to have machines with these standards cannot be done so the purpose of this study is to design a small-scale EFB counter. The speed for the enumeration process with 300 Rpm takes 6.3 minutes, and 500 Rpm with a time of 5.3 minutes.
ANALISIS KELAYAKAN USAHA PETERNAKAN BURUNG PUYUH PEDAGING (Coturnix coturnix japonica) DI KECAMATAN KERUMUTAN Laila, Widya; Aprilia, Rita; Yunita, Imelda
Jurnal Teknik dan Teknologi Tepat Guna Vol. 3 No. 3 (2025): Jurnal Teknik dan Teknologi Tepat Guna
Publisher : Riset Sinergi Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.62357/j-t3g.v3i2.352

Abstract

Quail farming business is one of the potential businesses as the population increases and public awareness of the need for daily animal protein sources that are easy to get at affordable prices compared to other poultry meat. The objectives of this study are to find out the feasibility of Mr. Agung Wibowo's quail farming business in Kerumutan District based on market and marketing aspects, technical aspects, environmental aspects and financial aspects. Data collection is carried out by means of field surveys, interviews, literature studies and documentation. The result of this research is that the quail farming business owned by Mr. Agung Wibowo in Kerumutan District is worthy of continuing. Based on market and marketing aspects, it is feasible because it has segmentation, clear targeting and market position, and a selling price that is quite competitive compared to other poultry meat prices and has a marketing strategy with a marketing mix. From the technical aspect, it is feasible because it has all the necessary facilities and equipment and have a clear production cycle and business location. From the environmental aspect, it is feasible because of the environmental impact management. Based on the results of the calculation, the financial aspect is declared feasible. Where the R/C Ratio value > out of 1, which is 1.5. The value of the π/C Ratio is 0.57% higher than the value of the BRI Simpedes savings interest rate of 0.25%. Production BEP Value < Production Amount and BEP Value Price < Selling Price per Head. From the results of the calculation of the Production BEP Value is 3,312 heads. So 3,312 Heads < 5,162 Heads and the result of calculating the BEP Price Value is Rp. 3,011. Then Rp. 3,011 < Rp. 5,500.
Manajemen pemeliharaan mesin filler menggunakan metode Overall Equipment Effectiveness di production house area nursery PT. RAPP Laila, Widya; Cahyani, Regita; Arsi, Fadli; Rahman, Arief Fazlul; Alfarisi, Salman
Jurnal Teknik Industri Terintegrasi (JUTIN) Vol. 8 No. 1 (2025): January
Publisher : LPPM Universitas Pahlawan Tuanku Tambusai

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31004/jutin.v8i1.42019

Abstract

Maintenance system is an activity conducted to ensure that machines or equipment are always ready to use. PT. RAPP uses a filler machine in the nursery area to fill cocopeat media into trays. The filler machine works optimally at a capacity of 600 kg (multiplied by two cycles) to fill 180 trays per day. When experiencing damage, this filler machine can only be used at a capacity of 300 kg (multiplied by four cycles) to fill 150-165 trays per day. To reduce machine downtime when there is damage, the implementation of machine maintenance management is needed. OEE is a method used to calculate machine effectiveness based on availability, performance, and quality. Using data from May 2022 to April 2023, the average OEE value obtained is 60.66%, indicating that the filler machine performance is below the standard of 85%. The calculation of the Six Big Losses shows that the values affecting machine performance are breakdown losses with a time loss of 22,825 minutes, rework losses with a time loss of 15.8 minutes, and setup and adjustment with a time loss of 41.8 minutes, indicating that the largest factor and the main cause affecting the OEE value of the filler machine is breakdown losses, which reduces the production rate.
Pemodelan karakteristik pengeringan pada proses pengeringan nanas (ananas comosus) Nasution, Fachri Ibrahim; Rahman, Arief Fazlul; Laila, Widya; Nasirly, Riri; Arsi, Fadli
Jurnal Teknik Industri Terintegrasi (JUTIN) Vol. 8 No. 1 (2025): January
Publisher : LPPM Universitas Pahlawan Tuanku Tambusai

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31004/jutin.v8i1.42020

Abstract

The thin layer model describes the drying process uniformly, regardless of the control mechanism. Fundamentally, using experimental data on dried materials can be explained by the method used. The purpose of this research is to determine the characteristics of the pineapple drying process using a thin layer model. Drying using the oven method at 60°C. The thin layer drying model uses Newton, logarithmic, and Midilli models. The statistical parameters used are R2 and SSE. The water content obtained did not differ much between the two varieties, namely 13, 27, and 13.14 (% db). The results of the comparison of the three models used lead to different results with R² values ​​of 0.89–0.96 and SSE 0.0095–0.0013 based on the non-linear regression analysis used. The Midilli model shows the best results with R² parameters of 0.06 and 0.94 and SSE of 0.0019 and 0.0025..