Articles
<![CDATA[An Electronic Traceability System for an Indonesian Fresh Fruit Supply Chain ]]>
<![CDATA[Vanany, Iwan]]>;
<![CDATA[Andri, Kuntoro Boga]]>;
<![CDATA[Mardiyanto, Ronny]]>;
<![CDATA[Puspita, Niniek Fajar]]>;
<![CDATA[Winarsih, Wiwik Heny]]>
<![CDATA[ IPTEK Journal of Proceedings Series Vol 1, No 1 (2014): International Seminar on Applied Technology, Science, and Arts (APTECS) 2013 ]]>
Publisher : <![CDATA[Institut Teknologi Sepuluh Nopember ]]>
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
DOI: 10.12962/j23546026.y2014i1.297
<![CDATA[Nowdays, traceability system for agriculture comodity is mandatory requirements in some countries such as Japan, United States, and all European countries. All export agricultural companies must applied traceability system to fulfill the mandates of goverments market requirements. Traceability system also has beneficials to reduce products return and improve efficiencies and effectiveness their inventory. Electronic traceability system is relatively new and is believed by many experts to have the advantages than paper-based traceability system such as: integration of data to multiple users, the accuracy of data input and control and monitoring easier and faster. Although the recent problems of traceability becomes the important issues in food and agriculture supply chain, but a few researchers to design and implement electronic traceability system especially to integrate multi-user and in supply chain contex. This paper develop the electronic traceability system products including software for electronic traceability system and barcode technology. Unified Modelling Language (UML) is used to design traceabilty system model that was described a usecase, state and sequence diagram. Based on these models, electronic traceability system was developed by adopting XAMPP control panel. Indonesian mangosteen and manggo fruits were chosen as a case study in order to validate electronic traceability system. The results showed that the electronic traceability system product is relatif support to helps members of supply chain to complete their traceability system capabilities for the benefit of mangosteen and mango exports]]>
<![CDATA[Holistic Model for SMEs Growth Studies: A Conceptual Overview ]]>
<![CDATA[Runtuk, Johan K.]]>;
<![CDATA[Wirjodirdjo, Budisantoso]]>;
<![CDATA[Vanany, Iwan]]>
<![CDATA[ IPTEK Journal of Proceedings Series Vol 1, No 1 (2014): International Seminar on Applied Technology, Science, and Arts (APTECS) 2013 ]]>
Publisher : <![CDATA[Institut Teknologi Sepuluh Nopember ]]>
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
DOI: 10.12962/j23546026.y2014i1.330
<![CDATA[There have been extensive studies on firm’s growth. The determinants of growth are widely discussed among scholars. However, previous studies in context of small and medium enterprises (SMEs) growth are still limited and tend to focus on specific factor that affect firm’s growth. This approach can specifically measure the direct contribution of the factor to the growth, but it has been criticized due to its limited perspective and applicability. In this study, we investigate related studies on firm’s growth, specifically on SMEs growth, and proposing a holistic model to get a thorough understanding about the success or the failure of SMEs to grow. Based on a thorough review of the extant literature, we have identified several main theories/concepts on firm’s growth studies. Finally, we offer a conceptual overview for SMEs growth studies.]]>
<![CDATA[Analysis and Control for Heavy Equipment Spare Parts Inventory in the Nickel Mining Industry ]]>
<![CDATA[Pardede, Sri Rahayu]]>;
<![CDATA[Vanany, Iwan]]>
<![CDATA[ IPTEK Journal of Proceedings Series No 6 (2020): 6th International Seminar on Science and Technology 2020 (ISST 2020) ]]>
Publisher : <![CDATA[Institut Teknologi Sepuluh Nopember ]]>
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
DOI: 10.12962/j23546026.y2020i6.11146
<![CDATA[In the mining industry, analyzing, and controlling the spare parts inventory is important activities and need special attention from the company. The high production cost of the mining industry, including spare parts and shortages costs affects the financial and operational aspects of the company. Spare parts inventory management policy is critical to increase the service level and minimize spare parts cost. In this mining case study, the out of stock incidents in the heavy equipment spare parts were often occurring and significantly affecting the performance of maintenance and operations. The purpose of this study is to determine minimum stock (safety stock) and maximum stock to reduce overstocks and reduce the number of stocks out in spare parts inventory and as well as inventory cost. The method used to solve the problem is economic order quantity (EOQ) and continuous review control (S, s) to determine the minimum and maximum stocks. Determining the combination of S and s has a major impact on the success of inventory control. Substitution parts are subdivided into alphabetical values to determine their significance. As a result of calculating inventory value using EOQ and S, s will get the highest inventory value to reduce inventory costs.]]>
<![CDATA[Strategic Analysis on Start-Up Business Using Objectives and Key Results Method in Rumah Kapas Holding ]]>
<![CDATA[Bassam Muhammad Drehem]]>;
<![CDATA[Iwan Vanany]]>
<![CDATA[ IPTEK Journal of Proceedings Series No 3 (2020): International Conference on Management of Technology, Innovation, and Project (MOTIP) 2 ]]>
Publisher : <![CDATA[Institut Teknologi Sepuluh Nopember ]]>
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
DOI: 10.12962/j23546026.y2020i3.11209
<![CDATA[The Textile and Garment Industry is one of the industrial sectors in Indonesia which is a priority by the Ministry of Industry in the "Making Indonesia 4.0" program. This causes the higher demand for better product quality. By asking for quality demand it will become a hot segment for garment companies. Seeing this opportunity, Rumah Kapas as a company in the garment field needs to improve its strategy to meet new challenges and demands from the textile and garment industry. This research is going to be conducted by analysing internal and external data from the company. Resulting data will be processed using SWOT Analysis and Five Forces Analysis. Those will provide an output in a form of generic strategies by Porter and give strategic recommendation that will be translated to objectives and key result using Objectives and Key Result (OKR) method. Strategy analysis usage in this research aim the capability of Rumah Kapas to determine the company position and the availability of recommendation and evaluation for company to achieve its ideal condition.]]>
<![CDATA[Development of Supply Chain Risks Interrelationships Model using Interpretive Structural Modeling and Analytical Network Process ]]>
<![CDATA[Chatarina Dian Indrawati]]>;
<![CDATA[Putu Dana Karningsih]]>;
<![CDATA[Iwan Vanany]]>
<![CDATA[ IPTEK Journal of Proceedings Series Vol 1, No 1 (2014): International Seminar on Applied Technology, Science, and Arts (APTECS) 2013 ]]>
Publisher : <![CDATA[Institut Teknologi Sepuluh Nopember ]]>
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
DOI: 10.12962/j23546026.y2014i1.375
<![CDATA[Globalization and vast changing of business nature nowadays makes interdependence between organizations who shares the same supply network is becoming stronger. Any risk that occurs in one point of a supply chain could affect to the whole network. As a result, risk in supply chain is getting more complex and unpredictable. Since any kind of risk could potentially impede or even stop business activities of the whole supply chain therefore managing supply chain risk is essential. Moreover, to handle supply chain risk properly, the interrelationships between these risks should be identified. However, there is only few study which cover interrelationships between supply chain risks. This research is aiming to provide a proposed model of a supply chain interrelation risks based on case study in an petrochemical industry. Interpretive Approach Structural Modeling is utilized to develop the relationships between risks while weight determination for risk relationship is conducted using Analytical Network Process. The case study of this research identifies that there are 14 supply chain risks which are grouped as driver, dependent, autonomous and linkage. The weight of risk interrelations are then considered when quantify each risk. Calculation of risk priority number is not only taking into account its own probability and consequence but also the probability and weight of affected risk.]]>
<![CDATA[Consumable Material Spare Part Management Control in Electricity Transmission System ]]>
<![CDATA[Widi Riskianto]]>;
<![CDATA[Iwan Vanany]]>;
<![CDATA[Niniet Indah Arvitrida]]>
<![CDATA[ IPTEK Journal of Proceedings Series No 7 (2020): The 2nd International Conference on Global Development (ICODEV) 2020 ]]>
Publisher : <![CDATA[Institut Teknologi Sepuluh Nopember ]]>
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
DOI: 10.12962/j23546026.y2020i7.9539
<![CDATA[Overstock spare part in the Electric Power Transmission System will affect the inefficiency in the asset management of the company. While the spare part stockouts in the company will disrupt the maintenance process of the electric transmission system, which then lead to power outages. Overstock spare parts are caused by several factors, such as forecasting errors in material requirements, intermittent requests, so it is difficult to determine the optimal order quantity. On the other hand, the unavailability of spare parts will affect the reliability of the electrical energy transmission system, which has the potential in causing a massive power outage. Monte Carlo simulations help to show the more concrete picture of the spare parts inventory condition using a periodic review (R, S) system approach. Divination of the combination of S and R parameters is very influential on the success of spare part control. Spare part classification is used for understanding the demand characteristics and the level of criticism. Moreover, the analysis of simulation results will show the information on supply fulfilment strategies to overcome the problems of either spare parts availability or spare parts overstock.]]>
<![CDATA[Application of Value Stream Mapping on Operating Project Business Process at Nickel Mining Industry ]]>
<![CDATA[Aristo Andryanto]]>;
<![CDATA[Iwan Vanany]]>
<![CDATA[ IPTEK Journal of Proceedings Series No 6 (2020): 6th International Seminar on Science and Technology 2020 (ISST 2020) ]]>
Publisher : <![CDATA[Institut Teknologi Sepuluh Nopember ]]>
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
DOI: 10.12962/j23546026.y2020i6.11113
<![CDATA[This study investigated the usage of manhours against project cost impact in the business process of capital and operating project in mining industry. The case study in this study is nickel mining company in Indonesia. The waste identification and elimination are used on the business process operations and capital project delivery system using lean thinking in project management and Analytical Hierarchy Process (AHP). The study results shows that in current business process state, 95% project expenditure in case study on 2019 was spent for capital project and 5% for project operations. This results of this study is quite different with the manhours spent each on operating and capital project. In 2019, both the Capital Project Management and Engineering Services department spent 70% of their manhours on Capital Project and 30% on Operating Project. It shows that in managing 5% of their project budget, the company’s case study had to spent 30% of their project team manhours. With the proposed business process, the company’s case study should be able to optimize their manhours usage proportionally to the project cost impact.]]>
<![CDATA[An Optimization Model for Container Capacity in New Sorong-Papua Port ]]>
<![CDATA[Iwan Vanany]]>;
<![CDATA[Duha Awaluddin Kurniatullah]]>;
<![CDATA[Edi Jadmiko]]>;
<![CDATA[Dody Hartanto]]>;
<![CDATA[zulfiyah Musfiroh]]>
<![CDATA[ IPTEK Journal of Proceedings Series Vol 1, No 1 (2014): International Seminar on Applied Technology, Science, and Arts (APTECS) 2013 ]]>
Publisher : <![CDATA[Institut Teknologi Sepuluh Nopember ]]>
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
DOI: 10.12962/j23546026.y2014i1.231
<![CDATA[The issue of the logistics system is an important issue for the state of Indonesia as an archipelago. Effort to distribute commodities to destinations across the island and attempted export of transport costs become cheaper and faster is a thing to be achieved by all parties including the government of Indonesia. Logistical problems in eastern Indonesia are more complex than the western part of Indonesia. For example, the cost of transport from eastern Indonesia is more expensive than the western part of Indonesia. Therefore, PELINDO II as the company seeks to make the country a new facility in the form of New-port that will replace the port of Sorong Sorong. New-Sorong port will be the largest port in Eastern Indonesia. This paper makes an optimization model with the goal of optimizing shipping container and determines how much capacity should be made to the port of New-Sorong.]]>
<![CDATA[Planning & Controlling Tourism Landscape Design Project using Critical Chain Project Management (CCPM) Schedulling ]]>
<![CDATA[Alivia Rosy Walidonna]]>;
<![CDATA[Iwan Vanany]]>
<![CDATA[ IPTEK Journal of Proceedings Series No 3 (2020): International Conference on Management of Technology, Innovation, and Project (MOTIP) 2 ]]>
Publisher : <![CDATA[Institut Teknologi Sepuluh Nopember ]]>
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
DOI: 10.12962/j23546026.y2020i3.11205
<![CDATA[Project Management must meet the performance criteria of timeliness and budget control agreed between the project owner, contractor and supervisor. However, the level of uncertainty in the project implementation process is very high and causes delays and over budgeting. The Village Nongkojajar is a Proposed Integrated Agropark Project as a result of the revitalization of the non-productive land of the Horticultural Seed Farm owned by the Government of East Java Province. The Landscape Architecture Project has a Creative Value Chain which is divided into Creation - Implementation - Management. Therefore scheduling and controlling the project becomes important in order to to estimate working time and the project remains in accordance with the predetermined project timeline and whenever corrective action is needed. The relevance of Project Management in this research is that with high project problems, require a good planning process. The Project can be completed quickly than the specified time and more cost effective. Critical Chain Project Management (CCPM) is one method for completing and preparing projects that focus on the resource requirements for implementing projects by adding project buffers, feeding buffers and resource buffers. By analyzing using CCPM, researchers can look for optimization and control in implementing project scheduling.]]>
<![CDATA[The Proposed Model of Suppliers Performance Measurement for Vendor Held Stock (VHS) in Mining Industry ]]>
<![CDATA[Sri Wahyuni]]>;
<![CDATA[Suparno Suparno]]>;
<![CDATA[Iwan Vanany]]>
<![CDATA[ IPTEK Journal of Proceedings Series No 6 (2020): 6th International Seminar on Science and Technology 2020 (ISST 2020) ]]>
Publisher : <![CDATA[Institut Teknologi Sepuluh Nopember ]]>
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
DOI: 10.12962/j23546026.y2020i6.11129
<![CDATA[Vendor Held Stock (VHS) is the storage and management a system for spare parts and other material must prepared and managed with the suppliers in case study. The case study in this research is in nickel mining company in Indonesia. The company’s case study requires all suppliers should provide the spare parts and other materials in their warehouses. The purpose of this study is to develop VHS supplier’s performance measurement system in case study. The key performance indicators (KPI’s) in VHS’s supplier performance measurement system are determined to ensure the buyer demand can be fulfilled in a timely, systematic and well organized with the correct quantity and maintained quality. The method used in measuring supplier performance is a combination of the Analytical Hierarchy Process (AHP), The Objective Matrix (OMAX) and Fishbone Diagram Methods. The results of this research are expected to obtain measurement models and find the root cause and solutions to the current problem to improve overall supplier performance.]]>
