Garuda - Garba Rujukan Digital

Design and Construction of Smart House Prototype Based Internet of Things (Iot) Using Esp8266 Adi Winarno; Mahfud Affandi
BEST Vol 4 No 1 (2022): BEST
Publisher : Program Studi Teknik Elektro Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/best.vol4.no1.5447

IoT (Internet of Things) is a concept that aims to expand the benefits of continuously connected internet connectivity continuously. IoT can be used at home as a smart home system for controlling electronic equipment that can be operated by means ofinternet connection (WiFi). This IoT-based smart home system uses ESP 8266 microcontroller as hardware and blynk application as a tool controller and control. This system consists of a lamp controller, knowing humidity and room temperature, detection of human movement at home abandoned, early detection of fire sources to prevent house fires, and LPG gas leak detector for home security. There are four sensors used are PIR sensors to detect human movement, MQ2 sensor to detect LPG gas leaks, flame sensor to detect LPG gas leaks early detection of fire, and the DHT11 sensor to determine humidity and temperature. The design of this system uses a relay which is used as a liaison lamp with system.

DESIGN & BUILD A SLURRY TRANSFER CONTROL & MONITORING SYSTEM ON THE ATM 140 SPRAY DRYER USING MICROCONTROLLER WITH ULTRASONIC SENSORS Adi Winarno; Nur Faizim; Muchammad Lukman Fauszan lukman
BEST Vol 4 No 2 (2022): BEST
Publisher : Program Studi Teknik Elektro Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/best.vol4.no2.6157

In the current developments automation systems have begun to be applied to the industrial world, including the ceramic or tile industry. The ceramic industry in the main raw materials is soil, processing or mixing soil from crusher machines that will be produced into slurry materials ( slurry) using milling time continus (MTC), spray dryer pump machines to distribute slurries from the reservoir center to the ATM 140 reservoir. Often experiences overload slurry on atm 140 reservoirs because the system still uses swith. The operator still turns off the pump manually when there is an overload, based on these problems, an innovation is needed for an innovative slurry transfer control and monitoring tool on the ATM 140 spray dryer using an ultrasonic microcontroller-based sensor and the percentage of the contents of the reservoir that will be displayed on the LCD.

SMOKE DETECTION DESIGN USING MQ-2 SENSOR AND EXHAUST FAN BASED ON MICROCONTROLLER Adi Winarno; Widodo Widodo; Rahmat Hanif Darmawan
BEST Vol 5 No 1 (2023): BEST
Publisher : Program Studi Teknik Elektro Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/best.vol5.no1.7216

Clean air is a very important requirement for life on earth, especially for humans. Nowadays people are competing to maintain air quality in their environment by using Air Conditioners (AC). The use of air conditioning in the home environment without us knowing that the air we breathe is contaminated with smoke. The smoke in the air-conditioned room cannot escape because the room is always closed. As a result, the smoke content that cannot escape is very dangerous, so a prototype of an indoor smoke detector is made using the Arduino microcontroller and the MQ-2 sensor as a smoke sensor. If smoke is detected by the MQ-2 sensor, Arduino will turn on the bazzer and fan.

Smart Home Remote Control System Prototype Using Internet of Things (IoT) Based ESP8266 Microcontroller Adi Winarno; Widodo; Mochamad Kevin Nurcahyo
BEST Vol 5 No 2 (2023): BEST
Publisher : Program Studi Teknik Elektro Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/best.vol5.no2.8063

Technology is developing very rapidly in the current era, there will be several impacts that will result from the development of technology. Electronic equipment control can be done remotely in real time using the IoT system. The problem faced is the concern when leaving home. Because when leaving the house, homeowners sometimes often forget about electronic devices whether they are turned off or still on. IoT can be utilized at home as a smart home system by connecting an electronic device to an android application. This IoT-based smart home system uses an ESP8266 microcontroller which is used to connect between hardware and software that is controlled through the Blynk application. Blynk application is used as an interface that functions to provide input and produce output. This system consists of four sensors, namely the MQ2 sensor to detect gas leaks in the kitchen, the DHT11 sensor to determine the level of humidity and temperature in the bedroom, the PIR sensor to detect human movement at the front entrance, the ULTRASONIC sensor as a detector of the water level in the water reservoir and using three relays as a connector for lights and other electronic components. And using the Blynk application as a control system on the ESP8266 microcontroller.

Design And Construction Of Metal And Non-Metal Waste Selecting Tools Based On Arduino Uno Mulianto, Moch Amin Fajar; Adi Winarno; Mohamad Ilham
BEST Vol 6 No 1 (2024): BEST
Publisher : Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/best.vol6.no1.8833

This Arduino-based automatic metal and non-metal waste sorting tool is designed to sort waste, making it easier to recycle waste. The main components of this tool include Arduino (as a tool control system), proximity sensor (as a metal scrap detector), servo motor (as a driver to isolate metal scrap) and LCD to display the type of metal scrap. In terms of waste sorting, the Proximity sensor will detect waste. If the waste is detected as metal waste, the servo motor will rotate to the right and direct the waste to a special metal waste bin. The LCD screen will display the type of metal waste. If the proximity sensor does not detect non-metal waste, the servo motor will rotate to the left and direct the non-metal waste to a special non-metal waste bin. This type of waste sorter is very helpful in reducing waste because it can be processed according to the type of waste.

PROTOTYPE SMART JACKET UNTUK DRIVER OJEK ONLINE BERBASIS INTERNET OF THINGS (IOT) DI KOTA SURABAYA Adi Winarno; Ilham, Mohamad; Muhamad Anang Sucipto
BEST Vol 6 No 2 (2024): BEST (Buana Electrical Science Technology): Journal of Applied Electrical, Scienc
Publisher : Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/best.vol6.no2.9441

The research aims to design an automatic cooling jacket based on the Internet of Things (smart jacket) that can be used when riding motorbikes, including online motorcycle taxis. The methods used in this research include user needs analysis, system design, prototypes, and fan speed performance testing. In the user needs analysis stage, a survey was conducted among motorcyclists to identify problems faced when riding in hot weather conditions. Next, a system design consisting of a temperature sensor and an IoT communication module was carried out. After designing the system, an automatic cooling jacket prototype was developed. This prototype is equipped with a temperature sensor that will detect the rider's body temperature level, and an IoT communication module to allow users to control the jacket via an application on a smartphone. The results of this research show that an IoT-based automatic cooling jacket can effectively reduce the body temperature of motorcyclists when riding in hot weather. In speed performance testing, this jacket succeeded in reducing the rider's body temperature efficiently. This research is expected to contribute to the development of wearable technology that can increase comfort and safety for motorcyclists. Apart from that, this research can also be the basis for developing IoT-based automatic cooling jacket products that can be mass-produced and sold on the market.

Pengendalian Kelembaban Tanah dan pH pada Tanaman Kecambah: Sistem Irigasi Otomatis untuk Budidaya Kecambah Kaya Nutrisi Menggunakan Arduino Uno Adi Winarno; akhmad solikin; Risyaf, Muhammad; Adi, Winarno
BEST Vol 6 No 2 (2024): BEST (Buana Electrical Science Technology): Journal of Applied Electrical, Scienc
Publisher : Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/best.vol6.no2.9535

Sprout cultivation is one of the practical and economical methods to obtain a type of food rich in nutrients. However, the success of sprout cultivation requires proper control of soil moisture and water pH in the cultivation environment. Watering begins when the moisture of the mung bean plant reaches the specified parameters with a soil moisture of 67 and a pH value of + 9. This tool aims to make manual work easier to automate, a benefit in watering sprout plants. This tool uses a water ph sensor and a soil moisture sensor or soil moisture sensor that functions as a soil moisture detector that will send commands to the Arduino uno to turn on the relay so that the water pump can automatically water according to the needs of the soil. The creation of this final project is carried out by designing, making and implementing system components which include Arduino uno as a controller, relay to turn on the water pump and turn off the water pump, LCD (linquit Crystal Display) to display the soil moisture value and water ph value. The results of the research value prove that the tools to be made can function properly and can be developed as expected.

Pengendalian Kelembaban Tanah dan pH pada Tanaman Kecambah: Sistem Irigasi Otomatis untuk Budidaya Kecambah Kaya Nutrisi Menggunakan Arduino Uno Adi Winarno; akhmad solikin; Risyaf, Muhammad; Adi, Winarno
BEST Vol 6 No 2 (2024): BEST (Buana Electrical Science Technology): Journal of Applied Electrical, Scienc
Publisher : Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/best.vol6.no2.9535

Sprout cultivation is one of the practical and economical methods to obtain a type of food rich in nutrients. However, the success of sprout cultivation requires proper control of soil moisture and water pH in the cultivation environment. Watering begins when the moisture of the mung bean plant reaches the specified parameters with a soil moisture of 67 and a pH value of + 9. This tool aims to make manual work easier to automate, a benefit in watering sprout plants. This tool uses a water ph sensor and a soil moisture sensor or soil moisture sensor that functions as a soil moisture detector that will send commands to the Arduino uno to turn on the relay so that the water pump can automatically water according to the needs of the soil. The creation of this final project is carried out by designing, making and implementing system components which include Arduino uno as a controller, relay to turn on the water pump and turn off the water pump, LCD (linquit Crystal Display) to display the soil moisture value and water ph value. The results of the research value prove that the tools to be made can function properly and can be developed as expected.

Sistem Keamanan Pintu Rumah dengan Pengenalan Wajah Menggunakan ESP 32 Cam: "Sistem Keamanan Pintu Rumah dengan Pengenalan Wajah Berbasis ESP 32 Cam: Solusi Cerdas untuk Keamanan Rumah Anda" Adi Winarno; Dimas Ricky Saputra; Adi, Winarno
BEST Vol 6 No 2 (2024): BEST (Buana Electrical Science Technology): Journal of Applied Electrical, Scienc
Publisher : Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/best.vol6.no2.9588

The development of science and technology, especially in the fields of Electronics and Informatics, is expected to enhance room or home security systems, particularly home door security systems. Many door security technologies have been developed to prevent and ensure the comfort of homeowners when they leave their homes. Some commonly used door security systems include CCTV cameras, fingerprint sensors, voice sensors, and RFID. However, with technological advancements, these security systems have shown vulnerabilities, such as frequent errors in fingerprint and voice sensors. Based on this, to create a more secure and innovative home door security system, the authors developed a security system with face detection and a remote warning notification system using Telegram. The researchers created a door security system using the ESP 32-CAM for face detection and as a controller for the Internet of Things (IoT) system. Additionally, a manual system using a keypad for password input was also created. The results of this study include the accuracy and speed of face recognition and the speed of sending security system warning information through the Telegram application.

Sistem Keamanan Pintu Rumah dengan Pengenalan Wajah Menggunakan ESP 32 Cam: "Sistem Keamanan Pintu Rumah dengan Pengenalan Wajah Berbasis ESP 32 Cam: Solusi Cerdas untuk Keamanan Rumah Anda" Adi Winarno; Dimas Ricky Saputra; Adi, Winarno
BEST Vol 6 No 2 (2024): BEST (Buana Electrical Science Technology): Journal of Applied Electrical, Scienc
Publisher : Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/best.vol6.no2.9588

The development of science and technology, especially in the fields of Electronics and Informatics, is expected to enhance room or home security systems, particularly home door security systems. Many door security technologies have been developed to prevent and ensure the comfort of homeowners when they leave their homes. Some commonly used door security systems include CCTV cameras, fingerprint sensors, voice sensors, and RFID. However, with technological advancements, these security systems have shown vulnerabilities, such as frequent errors in fingerprint and voice sensors. Based on this, to create a more secure and innovative home door security system, the authors developed a security system with face detection and a remote warning notification system using Telegram. The researchers created a door security system using the ESP 32-CAM for face detection and as a controller for the Internet of Things (IoT) system. Additionally, a manual system using a keypad for password input was also created. The results of this study include the accuracy and speed of face recognition and the speed of sending security system warning information through the Telegram application.

Title

Found 11 Documents
Search
Journal : Best : Journal of Applied Electrical, Science and Technology

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 11 Documents Search Journal : Best : Journal of Applied Electrical, Science and Technology

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 11 Documents
Search
Journal : Best : Journal of Applied Electrical, Science and Technology