Garuda - Garba Rujukan Digital

DROWSY DETECTION FROM VIDEO DRIVER FACE BASED ON EYE AND MOUTH FEATURES EXTRACTION USING THE CONVOLUTION NEURAL NETWORK METHOD Solikin, Akhmad; Setyati, Endang
BEST Vol 2 No 1 (2020): BEST
Publisher : Program Studi Teknik Elektro Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/best.vol2.no1.2584

This research was conducted in an effort to minimize the occurrence of road traffic accidents. In this study detected the level of fatigue and sleepiness from the driver's face video based on the extraction of eye and mouth features using the CNN method. The dataset in this study is 300 data with 3 different classes namely drowsiness 100 data, sleepy 100 data and normal 100 data. The number of epochs used in research to achieve high accuracy is as much as 50. In the test results it is known that the validation of accuracy has increased in each of the input layer results.

WATER POWER GENERATOR FOR PUBLIC ROAD ILLUMINATION LIGHTS OF PADI VILLAGE MOJOKERTO solikin, Akhmad; Ilma Suktawan, Rohib
BEST Vol 2 No 2 (2020): BEST
Publisher : Program Studi Teknik Elektro Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/best.vol2.no2.3476

Electricity problems in rural areas more and more electric power is needed. Until now, power plants that use water turbines are environmentally friendly electricity producers, so the potential for energy from the air needs to be utilized to address the demand for electricity. Therefore, the solution to this problem is to use the "Design and Construction of Hydroelectric Generator for Public Street Lighting". The generator is a source of electric voltage obtained by converting mechanical energy into electrical energy. The generator works based on the principle of electromagnetic induction, which is by rotating a coil in a magnetic field so that the induced GGL (Electric Motion Force) arises. In this thesis, a research is conducted on the Water Turbine Generator in the river in the village area of Padi Gondang Mojokerto as an object of water flow in order to generate electric power to reduce crime in the area in the form of a load object in the form of Public Street Lighting.

Manufacture of Solar Panel with 300W Inverter for Household Electricity Needs Yanatra Budi Pramana; Solikin, Akhmad; Faisal, Akhmad; Walujo, Djoko Adi; Rusdiyantoro; Titisari, Manik Ayu
Tibuana Vol 5 No 01 (2022): Tibuana
Publisher : UNIPA PRESS

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/tibuana.5.01.4604.41-45

Solar panels are semiconductor elements that can convert solar energy into electrical energy. This Research on Solar Power Plants (PLTS) assemble with materials such as solar panels, 3000 W inverters, batteries, relays and control chargers, after that the load calculations are carried out, then implementation and testing is carried out. This research also aims as a renewable electric power in the future. From the results of the PLTS load test carried out at the researcher's house, the highest load was 405.32 watts, while the highest load test results used PLN electricity, which was 267.06 watts. So it can be said that this research is successful in meeting the electricity needs of household scale.

DROWSY DETECTION FROM VIDEO DRIVER FACE BASED ON EYE AND MOUTH FEATURES EXTRACTION USING THE CONVOLUTION NEURAL NETWORK METHOD Akhmad Solikin; Endang Setyati
BEST Vol 2 No 1 (2020): BEST
Publisher : Program Studi Teknik Elektro Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/best.vol2.no1.2584

This research was conducted in an effort to minimize the occurrence of road traffic accidents. In this study detected the level of fatigue and sleepiness from the driver's face video based on the extraction of eye and mouth features using the CNN method. The dataset in this study is 300 data with 3 different classes namely drowsiness 100 data, sleepy 100 data and normal 100 data. The number of epochs used in research to achieve high accuracy is as much as 50. In the test results it is known that the validation of accuracy has increased in each of the input layer results.

WATER POWER GENERATOR FOR PUBLIC ROAD ILLUMINATION LIGHTS OF PADI VILLAGE MOJOKERTO Akhmad solikin; Rohib Ilma Suktawan
BEST Vol 2 No 2 (2020): BEST
Publisher : Program Studi Teknik Elektro Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/best.vol2.no2.3476

Electricity problems in rural areas more and more electric power is needed. Until now, power plants that use water turbines are environmentally friendly electricity producers, so the potential for energy from the air needs to be utilized to address the demand for electricity. Therefore, the solution to this problem is to use the "Design and Construction of Hydroelectric Generator for Public Street Lighting". The generator is a source of electric voltage obtained by converting mechanical energy into electrical energy. The generator works based on the principle of electromagnetic induction, which is by rotating a coil in a magnetic field so that the induced GGL (Electric Motion Force) arises. In this thesis, a research is conducted on the Water Turbine Generator in the river in the village area of Padi Gondang Mojokerto as an object of water flow in order to generate electric power to reduce crime in the area in the form of a load object in the form of Public Street Lighting.

Manufacture of Solar Panel with 300W Inverter for Household Electricity Needs Yanatra Budi Pramana; Akhmad Solikin; Akhmad Faisal; Djoko Adi Walujo; Rusdiyantoro; Manik Ayu Titisari
Tibuana Vol 5 No 01 (2022): Tibuana
Publisher : UNIPA PRESS

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/tibuana.5.01.4604.41-45

Solar panels are semiconductor elements that can convert solar energy into electrical energy. This Research on Solar Power Plants (PLTS) assemble with materials such as solar panels, 3000 W inverters, batteries, relays and control chargers, after that the load calculations are carried out, then implementation and testing is carried out. This research also aims as a renewable electric power in the future. From the results of the PLTS load test carried out at the researcher's house, the highest load was 405.32 watts, while the highest load test results used PLN electricity, which was 267.06 watts. So it can be said that this research is successful in meeting the electricity needs of household scale.

Alarm Pengendali Asap Pada Ruangan Bebas Asap Berbasis Mikrokontroler Arduino Winarno Fadjar Bastari; Akhmad Solikin; Widodo Widodo
Jurnal JE-UNISLA : Electronic Control, Telecomunication, Computer Information and Power System Vol 7, No 1 (2022)
Publisher : Universitas Islam Lamongan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30736/je-unisla.v7i1.818

Smoke is air pollution that is very dangerous for human health. Therefore, in this study the authors designed and modeled a fan speed controller using a smoke sensor based on an Arduino microcontroller. In addition, smoke control alarms can also be used for monitoring in smoke-free rooms in order to prevent and at the same time provide a deterrent effect on people who smoke in places where smoking is prohibited. The method used is to process the data detected by the MQ2 smoke sensor, then display the amount or level of smoke in the room and its condition on the LCD/monitor. The comparison of the values on the sensor will be processed with the Arduino and the output of the Arduino will be input coding on the Arduino IDE software to control the fan speed performance as a response to exhaust air in the ventilation area of the room. The microcontroller process is in the program as a controller of all components, then coding will control all components according to the coding ordered in the microcontroller and voltage controller at the smoke sensor input and LCD and fan output. The results obtained from this research project are able to detect the state of the air in a smoke-free room from smoke and CO pollution from 0 ppm to = 256 ppm and this pollution can be reduced by adjusting the fan speed as room air ventilation to avoid the deposition of smoke in a smoke-free room. which is dangerous. So that the air in the room becomes cleaner and safer for health.

Sintesis nanopartikel nikel hidroksida dengan menggunakan tween 20 dan PEG 400 Yanatra Budi Pramana; M. Sochibul A’lal Ma’arif; Sabdari Bella Chrisdia; Aprilia Isti Triantini; Akhmad Solikin; Krisyanti Budipramana
STIGMA: Jurnal Matematika dan Ilmu Pengetahuan Alam Unipa Vol 15 No 02 (2022)
Publisher : Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/stigma.15.02.6450.77-80

In this study we compared the synthesis of nickel hydroxide nanoparticles using two different solutions, namely tween 20 and PEG (Polyethylene Glycol) 400, the electrolysis method used 0.3 M sodium citrate with the addition of tween 20 and PEG 400, using a potential of 25 Volts for 30 minutes. Obtained nickel hydroxide nanoparticles. Scanning electron microscopy (SEM) is used for morphological characterization of the product. Nickel hydroxide nanoparticles added with tween 20 were in the form of nanoflowers, while nickel hydroxide nanoparticles added with PEG 400 were in a spherical shape. Keywords: High Voltage,Electrolysis, Ni(OH)2 nanoparticles

Wireless Android-Based Control of Plastic Crane Roll Control Prototype Akhmad Solikin; Yulfi Ainun Al Farizi; Yanantra Budi Pramana
BEST Vol 4 No 1 (2022): BEST
Publisher : Program Studi Teknik Elektro Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/best.vol4.no1.5441

Abstract - Overhead crane is a lifting tool used by almost all industries, ports, warehouses, workshops, and others. In general, the overhead crane control system is less effective and efficient because the operator still follows the direction of the crane's speed. In this case, problems often occur because the pendant switch which functions as a controller still uses a cable as a connector to the overhead crane panel. Various problems that often occur include cables breaking frequently due to being hit by a load lifted by the hoist, operators having difficulty setting a safe distance because they are limited by the length of the pendant switch cable. Based on the background of the problem, a control system is made which is expected to be able to control the overhead crane effectively and efficiently without using a cable as a connector but using an android smartphone. Control with an android smartphone using an android application with a wifi connection and an arduino uno R3 microcontroller. Based on the test results on this control system, device control can be controlled at a maximum distance of ± 100 meters as long as the device is still within wifi range. The control system can function optimally and the application can be installed on Android OS 4.0 (Jelly Bean) smartphones. Therefore, the use of a cable can be replaced with a wifi connection system to reduce friction with the cable and so that the operator can maintain a safe distance from the load to be moved because it is no longer limited by the length of the cable.

AIR TEMPERATURE AND HUMIDITY DATA LOGGERS EQUIPPED WITH LABVIEW AND ARDUINO-BASED WARNING SYSTEMS Akhmad Solikin; Karman
BEST Vol 4 No 2 (2022): BEST
Publisher : Program Studi Teknik Elektro Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/best.vol4.no2.6169

In the industrial world the process of measuring air temperature and humidity is a very important measurement process in the production process. But in practice in the field, the process of measuring air temperature &humidity is mostly done manually, which is done by recording which has the disadvantage of inaccurate measurement data. Recording temperature measurements that are done manually causes the product results to be not good, both in terms of quantity and quality. Related to these problems, the author took the initiative to create an alternative data logger device that is simpler, easier to integrate and relatively more affordable, without reducing the value of measurement accuracy. This data logger tool functions to monitor air temperature and humidity in real time, whose monitoring results are displayed through a system interface with the help of Labview software, Arduino Uno & DHT sensor. The final results of the trial design of the data logger tool are able to & have advantages, among others, air temperature and humidity parameters can be monitored automatically accompanied by alarm notifications, air temperature and humidity data parameters can be recorded automatically into logging data in the form of MS Excel format, and user can analyze data on air temperature and humidity parameters and the final results of the trial This air temperature & humidity data logger tool has an error rate of 0.5%.

Title

Found 27 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 27 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 27 Documents
Search