Claim Missing Document
Check
Articles

Found 11 Documents
Search

Implementasi Teknologi Load Balancing Dua Jalur Internet Service Provide (ISP) menggunakan Metode Per Connection Classifier (PCC) di Pondok Pesantren Yasin Kudus Anif, Muhammad; Widodo, Sarono; Hidayat, Sidiq Syamsul; Triyono, Eddy; Wasito, Endro; Wardihani, Eni Dwi; Anggraeni, Sri; Pramono, Subuh; Yulianto, Taufiq; Iswanti, Iswanti; Firmansyah, Ardi
JATI EMAS (Jurnal Aplikasi Teknik dan Pengabdian Masyarakat) Vol 2 No 1 (2018): JATI EMAS (Jurnal Aplikasi Teknik dan Pengabdian Masyarakat)
Publisher : Dewan Pimpinan Daerah (DPD) Forum Dosen Indonesia JATIM

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (805.44 KB) | DOI: 10.36339/je.v2i1.105

Abstract

Access to the Internet, as well as Information and Communication Technology (ICT) in general, is nowincreasingly needed by the wider community, including by the pesantren community. The community of pesantren needInternet media to expand access to sources of knowledge, publish the activities of pesantren, as well as a medium ofpesantren da?wah in cyberspace. Due to the lack of use of ICT in pesantren, then not all ICT components can be utilized.This community service partner is Pesantren Yasin Kudus, who wants to apply ICT to support learning for students(called santri), by providing smooth and healthy Internet access at affordable cost. The problem faced is Internet accessthat only depends on one Internet Service Provider (ISP), so if the connection on the ISP is failed then Internet accessbecomes disturbed. The solution offered is the use of two ISP connections as an Internet access network, by applying loadbalancing technology using Per Connection Classifier (PCC) method so that loading of traffic on both ISPs can bebalanced. With this program, partners can utilize Internet access from both ISPs optimally
Pendampingan Pemasaran Digital Untuk Kerajinan Rajut Kepada Ibu-ibu PKK RW V Kelurahan Jomblang Kecamatan Candisari Kota Semarang Widodo, Sarono; Anif, Muhammad; Wasito, Endro; Wardihani, Eni Dwi; Triyono, eddy; Anggraeni, Sri; Yulianto, Taufiq; Novitasari, Muhlasah
JATI EMAS (Jurnal Aplikasi Teknik dan Pengabdian Masyarakat) Vol 3 No 2 (2019): JATI EMAS (Jurnal Aplikasi Teknik dan Pengabdian Masyarakat)
Publisher : Dewan Pimpinan Daerah (DPD) Forum Dosen Indonesia JATIM

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (347.833 KB) | DOI: 10.36339/je.v3i2.240

Abstract

Jomblang Village is one of the villages in Candisari sub-district, Semarang city. Jomblang Village has an area of ??± 108 Ha and has a population of 17,322 people, has 15 RWs and 120 RTs. Activities that have been developed in Kelurahan Jomblang include catfish fattening, packaging screen printing, waste processing and catering including tempe craftsmen, tofu into chips. The activity carried out is an initiative of the local community, which is carried out with affordable capital and can be done by residents on the sidelines of free time which can be used as a side job. In this service, PKK mothers in RW V, Jomblang sub-district, Candisari subdistrict, Semarang has conducted training in the form of knitting skills and making simple knitting bags, followed by mentoring on how to market their products digitally (via the internet). The completion of community service is expected to make it easier for mothers to sell their knitting products and increase their product sales to the community through IoT technology so that it can improve the family economy.
Pelatihan Pemanfaatan E-Commerce Pasar Grosir Setono Pekalongan Widodo, Sarono; Yulianto, Taufiq; Triyono, Eddy; Wardihani, Eni D.; Anif, Muhammad; Kadiran, Sri Anggraeni; Pramono, Subuh; Wasito, Endro
JATI EMAS (Jurnal Aplikasi Teknik dan Pengabdian Masyarakat) Vol 1 No 1 (2017): JATI EMAS (Jurnal Aplikasi Teknik dan Pengabdian Masyarakat)
Publisher : Dewan Pimpinan Daerah (DPD) Forum Dosen Indonesia JATIM

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (767.084 KB) | DOI: 10.36339/je.v1i1.14

Abstract

Pengabdian kepada masyarakat yang telah dilakukan oleh tim pengabdian adalah untuk memberikan bantuan teknis kepada Koperasi Pengusaha Batik Setono dalam pengelolaan memperluas pemasaran Pasar Grosir Setono yang berlokasi di Jl. Dr.Sutomo, kota Pekalongan. Selama ini pemasaran dari batik Setono masih bersifat tradisional melalui jasa penjualan di lokasi grosir. Dalam upaya meningkatkan penjualan diperlukan pemasaran yang lebih luas memalui sebuah media pemasaran yaitu website. Website yang dikelola berupa website e-commerce untuk memperkenalkan dan menjual hasil produk batik. Transaksi produk, pelayanan nasabah, fitur lain dapat dilakukan melalui website tersebut. Dengan pemanfaatan e-commerce diharapkan dapat meningkatkan hasil penjualan sekaligus memperluas pasar batik Setono ke dunia internasional.
Pendampingan Implementasi Sistem Layanan Administrasi Berbasis Web dan Android di Desa Dukuh Boyolali Yulianto, Taufiq; Khamami, Khamami; Wasito, Endro; K, Sri Anggraeni; Widodo, Sarono; W, Eni Dwi; M, Muhlasah Novitasari; Prahara, Tahan; Rizal, Aminuddin; Lavindi, Eri Eli
Jurnal Pengabdian Sosial Vol. 1 No. 8 (2024): Juni
Publisher : PT. Amirul Bangun Bangsa

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.59837/x158gk60

Abstract

Belum adanya sistem layanan administrasi desa di Desa Dukuh, Boyolali secara online menyebabkan pelayanan yang diberikan kurang optimal. Pelayanan yang selama ini diberikan oleh perangkat desa Dukuh masih bersifat manual. Ketika warga membutuhkan surat, warga menghubungi Kepala Dusun melalui telepon atau via whatsapp atau datang kerumah Kepala Dusun untuk minta dibuatkan surat. Proses ini tentu kurang efektif, mengingat warga Desa Dukuh mayoritas bekerja sebagai karyawan swasta/pabrik dan petani. Jika sewaktu-waktu warga membutuhkan surat yang sifatnya mendesak, akan memakan waktu untuk mendapatkan surat. Untuk mengatasi masalah tersebut, maka dibangun “Sistem Layanan Administrasi Desa di Desa Dukuh, Boyolali Berbasis Web dan Android”. Dengan pendampingan implementasi sistem layanan administrasi desa berbasis web dan android kepada perangkat desa dan warga desa Dukuh akan membantu warga untuk mendapatkan surat secara mudah dan membantu perangkat desa untuk memproses surat dengan cepat. Dengan menggunakan sistem ini, warga bisa secara mandiri mengakses aplikasi sesuai dengan kebutuhan tanpa harus menemui Kepala Dusun atau datang kerumah Kepala Dusun untuk minta dibuatkan surat.
Digital Flood Control Model as a Digital Practical Learning Module widodo, sarono; Wasito, Endro; Anggraeni, Sri; Prahara, Tahan; Yulianto, Taufiq
JAICT Vol. 10 No. 1 (2025)
Publisher : Politeknik Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32497/jaict.v10i1.6175

Abstract

Abstract”” Teaching aids are one of the learning media that can be used in the learning process in the classroom or laboratory. The purpose of this media is to facilitate the understanding of the material being studied. In laboratory learning, in addition to practical modules, the development of teaching aids is needed as a case study for solving problems in the field. The teaching aid being researched is a learning module as the development of digital engineering practicals in the laboratory, specifically a digital flood control module. The module designed and created aims to teach how a flood control process can be created using digital circuits, thereby providing insights and understanding to students about the control process. The controller module reads the water level sensors set at high and low levels. When the water touches the high-level water sensor, the control output activates the relay to turn on the pump, so the water in a specific location is pumped elsewhere. When the control system reads the low-level sensor, the output deactivates the relay and the pump stops working. The water level sensor is set at a distance of 10 cm between the lower and upper limits. The volume of water pumped is 0.006 m3 or 6 liters in 30 seconds using a 12v DC water pump with a power of 25 watts.      
Pemanfaatan Pembangkit Listrik Tenaga Surya sebagai Sumber Energi Alat Pengering Rempah di Kampung Jamu Semarang Pramurti, Adeguna Ridlo; Muqorrobin, Mochammad; Hardito, Achmad; Rochmanto, Raditya Artha; Larasati, Pangestuningtyas Diah; Triyani, Endang; Wasito, Endro
Jurnal Pengabdian kepada Masyarakat Nusantara Vol. 6 No. 2 (2025): Jurnal Pengabdian kepada Masyarakat Nusantara Edisi April - Juni
Publisher : Lembaga Dongan Dosen

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Industri jamu adalah bagian dari warisan budaya dan tradisi kesehatan masyarakat Indonesia yang terus berkembang. Bahan dasar jamu terdiri dari berbagai rempah seperti jahe, kencur, dan temulawak. Salah satu industri jamu yang ada di Semarang terletak di Kampung Jamu Wonolopo. Jamu berbahan dasar rempah diolah melalui beberapa proses untuk menghasilkan produk jamu yang berkualitas, salah satunya adalah proses pengeringan rempah. Proses pengeringan ini menggunakan alat pengering otomatis yang pengoperasiannya menggunakan energi listrik besar. Hal ini akan meningkatkan biaya operasional produksi. Pembangkit listrik tenaga surya (PLTS) dapat digunakan sebagai solusi untuk catu daya alat pengering rempah atau empon-empon untuk meminimalisir biaya operasional dari penggunaan energi listrik. Tujuan pengabdian ini adalah merancang dan mengimplementasikan PLTS hibrida 580 Wp sebagai catu daya alat pengering empon-empon di Kampung Jamu Wonolopo, Semarang. Sistem kerja PLTS ini adalah panel surya menangkap cahaya sinar matahari di waktu siang hari dan disimpan pada baterai. Energi yang disimpan di baterai akan diubah oleh inverter hybrid dari DC ke AC yang digunakan untuk catu daya alat pengering empon-empon. Sistem kendali PLTS hibrida di pengabdian ini menggunakan programmable logic controller (PLC) dan sistem pemantauannya menggunakan supervisory control and data acquisition (SCADA). Hasil penerapan catu daya pada alat pengering empon-empon adalah PLTS hybrid mampu menghasilkan tegangan AC sebesar 232 V, tegangan DC sebesar 24,9 V, frequensi sebesar 50 Hz, arus sebesar 4 A yang mampu mencatu daya mesin pengering empon-empon yang beroperasi selama 40 menit perhari dengan rata-rata kebutuhan daya sebesar 1580 W.
Implementation of Web-based and Android-based Ruminant Livestock Management System with QR Code Technology at SMKN 1 Bawen Sasono, Sindung Hadwi Widi; Callista, Nada Vania Khansa; Hayuningtyas, Adika Dewi; Helmy, Helmy; Hidayat, Sidiq Syamsul; Wasito, Endro; Nursyahid, Arif; Nugroho, Ari Sriyanto
Jurnal SOLMA Vol. 14 No. 2 (2025)
Publisher : Universitas Muhammadiyah Prof. DR. Hamka (UHAMKA Press)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22236/solma.v14i2.18288

Abstract

Background: Manajemen peternakan ruminansia di SMKN 1 Bawen masih menerapkan sistem pencatatan manual yang menyebabkan ketidakefisienan dalam pengelolaan data dan keterbatasan akses informasi. Pegabdian ini bertujuan mengimplementasikan sistem manajemen peternakan berbasis Web dan Android dengan teknologi QR Code. Metode: Pengabdian menggunakan pendekatan agile yang terdiri dari empat tahap: perencanaan, analisis, rekayasa, dan evaluasi. Sistem dikembangkan menggunakan Visual Studio Code untuk website dan Android Studio IDE untuk aplikasi mobile, dengan pengujian menggunakan Black Box Testing, Stress Testing, dan Performance Testing. Hasil: Kegiatan ini berhasil diimplementasikan dengan fitur utama meliputi manajemen data ternak, identifikasi menggunakan QR Code, monitoring kesehatan, dan analisis perkembangan ternak. Sistem ini terbukti meningkatkan efisiensi pengelolaan data ternak dan memudahkan akses informasi bagi pengguna. Kesimpulan: Implementasi sistem manajemen peternakan digital berhasil mengatasi permasalahan pencatatan manual dan memberikan dampak positif pada pembelajaran siswa dalam manajemen peternakan modern.
Implementasi Artificial Intelligence DanInternet Of Things Untuk Mendeteksi Penggunaan Helm Proyek Syabilla Rosyada, Bilqis; Fitriyani, Yunita; Agung Setyawan, Thomas; Wasito, Endro; Budi Waluyo, Catur; Ratna Kusumatuti, Dianita; Helmy, Helmy
Jurnal Teknologi Informasi dan Ilmu Komputer Vol 12 No 4: Agustus 2025
Publisher : Fakultas Ilmu Komputer, Universitas Brawijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25126/jtiik.124

Abstract

BPJS Ketenagakerjaan mencatat bahwa jumlah kecelakaan kerja di Indonesia meningkat dari 221.740 kasus pada tahun 2020 menjadi 234.370 kasus pada tahun 2021, dan terus meningkat hingga mencapai 256.334 kasus pada November 2022. Berdasarkan data dari Kementerian Ketenagakerjaan Indonesia, pada tahun 2020, 57,5% dari total 126,51 juta pekerja di Indonesia memiliki tingkat pendidikan rendah, yang berkontribusi pada rendahnya kesadaran akan pentingnya budaya Keselamatan dan Kesehatan Kerja (K3) serta penggunaan Alat Pelindung Diri (APD) yang sesuai standar. Pemantauan penggunaan APD, termasuk helm proyek di area konstruksi, masih dilakukan secara manual, yang dirasa kurang efisien. Penelitian ini bertujuan untuk mengembangkan alat berbasis Artificial Intelligence (AI) dan Internet of Things (IoT) yang dapat memantau penggunaan helm proyek secara real-time dengan akurasi tinggi dan dapat dipantau melalui dashboard. Alat ini terbukti lebih efektif dalam meminimalisir kecelakaan kerja, dengan rata-rata akurasi deteksi sebesar 84,65% untuk pekerja yang memakai helm dan 71,5% untuk yang tidak memakai helm. Penelitian ini menggunakan metode Agile yang melibatkan observasi, identifikasi kebutuhan, perancangan, pembuatan sistem, implementasi, dan pengujian. Hasil penelitian ini menunjukkan bahwa sistem yang dikembangkan mampu memberikan kemudahan bagi petugas K3 dalam melakukan pengawasan, sehingga dapat mengurangi risiko kecelakaan kerja.   Abstract The Workers Social Security Agency (BPJS Ketenagakerjaan) recorded that the number of work accidents in Indonesia increased from 221,740 cases in 2020 to 234,370 cases in 2021, and continued to rise, reaching 256,334 cases by November 2022. According to data from the Indonesian Ministry of Manpower, in 2020, 57.5% of the total 126.51 million workers in Indonesia had a low level of education, which contributed to a lack of awareness of the importance of Occupational Safety and Health (OSH) culture and the use of Personal Protective Equipment (PPE) that meets standards. The monitoring of PPE usage, including project helmets in construction areas, is still conducted manually, which is considered inefficient. This study aims to develop a tool based on Artificial Intelligence (AI) and the Internet of Things (IoT) that can monitor the use of project helmets in real-time with high accuracy and can be monitored through a dashboard. This tool has proven to be more effective in minimizing work accidents, with an average detection accuracy of 84.65% for workers wearing helmets and 71.5% for those not wearing helmets. The study utilized the Agile method, involving observation, needs identification, system design, system development, implementation, and testing. The results of this study show that the developed system can provide ease for OSH officers in conducting supervision, thereby reducing the risk of work accidents.  
Quick Response Anti-Theft Measures in Jewelry Stores and Banks Utilizing the Internet of Things Widodo, Sarono; Bramantyo, Hutama Arif; Wardihani, Eni Dwi; Yulianto, Taufiq; Helmy, Helmy; Wasito, Endro; Daffa, Muhammad; Yuliana, Lutfi
JAICT Vol. 9 No. 1 (2024)
Publisher : Politeknik Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32497/jaict.v9i1.5113

Abstract

The act of theft is a prevalent criminal activity within society, particularly observed in financial institutions and jewelry establishments, owing to the significant economic worth associated with valuable assets like currency, gold, and diamonds. Certain locations lack an integrated security system that interfaces with law enforcement, hence posing challenges for victims to report criminal incidents, particularly in cases involving armed or violent attackers. Hence, the purpose of this final project tool is to streamline and expedite theft reporting by leveraging the capabilities of the Internet of Things. This tool gathers empirical data in the form of visual representations, geographical coordinates, and temporal information pertaining to an incident. The development process employs the waterfall methodology, characterized by an average data transmission speed of 21.5 seconds and a database-to-telegram latency time of around 3.85 seconds. The complete duration encompassing the stages of detection and subsequent notification via telegram amounts to approximately 25.35 seconds. The test results indicate a location tolerance of around 5-10 meters relative to the test spot.
Implementation Of IoT In Nila Fish Cultivation With Bioflock System Wasito, Endro; Prahara, Tahan; Nursyahid, Arif; ., Dadi; Anggraeni K., Sri
JAICT Vol. 9 No. 1 (2024)
Publisher : Politeknik Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32497/jaict.v9i1.5309

Abstract

In cultivating tilapia using the biofloc system, maintaining water quality (temperature, pH, turbidity) is not only for the health of the fish but also for the reproduction of the biofloc. So that water quality is known, sensors connected to IoT are installed. Sensor output data is processed by Arduino and sent to a data base server via the internet network so that water quality parameters can be monitored at any time via the internet network. This system was created in research entitled "Optimizing Tilapia Cultivation of Biofloc Systems with the Internet of Things". The pool has a diameter of 2m, height 1m, airator 500 liters/min, 4 airstones @ 30 liters/min. After the pond is assembled and the biofloc has grown (made from 375 ml multi-probiotic, 300 ml molasses, 150 gram dolomite, 60 gram nitrobacter), proceed with adding 150 tilapia fish seeds 5-6 cm long (weight 22.2 gr/fish). After 2 months the growth of the tilapia became 12-13 cm long (weighing 100 g/fish), with 2% mortality. The sensor measurement results displayed on the website are as follows: average pH values (5.6-7.5), temperature (27-29), turbidity (225-354) ppm, floc density (20-25) ml/liter. Hiprofit 781-3 feed is 13.4 kg. The research results show that IoT implementation can display the water quality of biofloc tilapia ponds in real time. pH fluctuations from 5.6-7.5 indicate that biofloc can function well.