Claim Missing Document
Check
Articles

Found 6 Documents
Search

SIFAT FISIS KAYU MEDANG SEREH BERDASARKAN POSISI BATANG DAN BAGIAN KAYU TERAS DAN QUBAL: Physical Properties of Citronella Wood Based on the Position of the Trunk and the Heartwood and Sapwood Riana Anggraini; Rahma Nur Komariah; Ana Agustina
Jurnal Silva Tropika Vol. 6 No. 1 (2022): Jurnal Silva Tropika
Publisher : Fakultas Kehutanan Universitas Jambi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22437/jsilvtrop.v6i1.23472

Abstract

ABSTRACT Research on the introduction of medang wood is still limited, so it encourages to carry out research on types of medang wood such as the type of lemongrass medang wood which is a type of commercial wood from Jambi Province. One of the properties of wood that can be a reference in identifying lemongrass medang wood is the physical properties of wood based on the position of the trunk (base, middle and tip). This activity of identifying lemongrass medang wood will make it easier to identify the type of lemongrass medang wood with other types of medang wood. In addition, it will simplify the process of work and the purpose of using this type of wood. In connection with the above, this study was conducted which aimed to determine the physical properties of lemongrass medang wood in the position of the trunk (base, middle and end) and the heartwood and qubal. The physical properties of wood for fresh moisture content in heartwood at the base have the highest value of 84.43%, but have the lowest density and specific gravity values of 0.62 g / cm3 and 0.55. Based on the position of the wood in the trunk, the wood at the base has the lowest volume development and depreciation values of 9.75% and 10.50%. Timber at the end position has the highest development and depreciation values of 11.81% and 11.94%. The position of the wood on the trunk has an influence on fresh moisture content and volume development but does not affect the type of wood.   Keywords: heartwood, medang wood, physical properties, position of the trunk, sapwood   ABSTRAK Penelitian mengenai pengenalan kayu medang masih terbatas, sehingga mendorong untuk melaksanakan penelitian mengenai jenis kayu medang seperti jenis kayu medang sereh yang merupakan jenis kayu komersial dari Provinsi Jambi. Salah satu sifat kayu yang dapat menjadi acuan dalam mengidentifikasi kayu medang sereh ini adalah sifat fisis kayu berdasarkan posisi batang (pangkal, tengah dan ujung). Kegiatan identifikasi kayu medang sereh ini, maka akan mempermudah dalam pengenalan jenis kayu medang sereh dengan jenis kayu medang lainnya. Selain itu, akan mempermudah proses pengerjaan dan tujuan penggunaan jenis kayu tersebut. Sehubungan dengan hal tersebut diatas, maka dilakukan penelitian ini yang bertujuan untuk mengetahui sifat fisis kayu medang sereh pada posisi batang (pangkal, tengah dan ujung) dan bagian kayu teras dan qubalnya. Sifat fisis kayu untuk kadar air segar pada kayu teras di bagian pangkal memiliki nilai tertinggi yaitu 84,43%, akan tetapi memiliki nilai kerapatan dan berat jenis terendah yaitu 0,62 g/cm3 dan 0,55. Berdasarkan posisi kayu dalam batang, kayu pada bagian pangkal memiliki nilai pengembangan dan penyusutan volume terendah yaitu 9,75% dan 10,50%. Kayu pada posisi ujung memiliki nilai pengembangan dan penyusutan tertinggi yaitu 11,81% dan 11,94%. Posisi kayu pada batang memiliki pengaruh terhadap kadar air segar dan pengembangan volume akan tetapi tidak berpengaruh terhadap tipe kayu.   Katakunci: kayu medang, posisi batang, qubal, teras
Effect of Corona Plasma Radiation on the Contact Angle and Wettability of Bamboo Surface Alfajrin, Achmad Chalid Afif; Muhlisin, Zaenul; Komariah, Rahma Nur; Putra, Bintang Ridzky Ranindra; Nazuwatussya'diyah, Nazuwatussya'diyah; Arzi, Yudha Hamdi; Mardhiyatna, Mardhiyatna; Sari, Rizki Yustisia
Journal of Energy, Material, and Instrumentation Technology Vol 6 No 2 (2025): Journal of Energy, Material, and Instrumentation Technology
Publisher : Departement of Physics, Faculty of Mathematics and Natural Sciences, University of Lampung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.23960/jemit.v6i2.294

Abstract

Bamboo is a widely utilized non-timber forest product, often innovated into laminated boards, particle boards, and plywood. The outer bamboo surface (skin) possesses high compressive strength but exhibits hydrophobic properties, limiting its wettability toward liquids. Plasma corona technology, operating at atmospheric pressure and using surrounding gases at a relatively low cost, offers a promising solution to modify bamboo surfaces by increasing their surface energy. This study aimed to analyze the hydrophilic resistance and wettability of bamboo surfaces treated with plasma corona, measured through contact angle analysis. The direct drop method was employed by dripping water and phenol formaldehyde (PF) fluids onto bamboo surfaces treated with plasma corona. Contact angle measurements were performed using ImageJ drop analysis software. Results demonstrated that plasma corona treatment significantly reduced contact angle values, improving surface wettability. Untreated bamboo surfaces showed contact angles of 72.7° for water and 111.5° for PF fluids, indicating limited wettability. Post-treatment, the contact angles decreased to less than 30° for water and below 90° for PF, signifying enhanced wettability. However, the hydrophilic properties were found to be non-permanent, with contact angle values gradually increasing over 13 days of observation. Among the tested parameters, plasma corona treatment with a current strength of 75 mA for 5 minutes provided the most optimal wettability improvement for water and PF fluids. This study highlights the effectiveness of plasma corona in enhancing bamboo surface wettability, making it more suitable for applications requiring adhesive bonding or fluid spreading in industrial processes.
Identifikasi Makroskopis dan Mikroskopis Kayu Medang Sereh Berdasarkan Bagian Batang : Macroscopic and Microscopic Identification of Lemongrass Medang Wood Based on Stem Section Anggraini, Riana; Agustina, Ana; Komariah, Rahma Nur; Khabibi, Jauhar
Jurnal Silva Tropika Vol. 7 No. 1 (2023): Jurnal Silva Tropika
Publisher : Fakultas Kehutanan Universitas Jambi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22437/jurnalsilvatropika.v7i1.29881

Abstract

ABSTRACT Some aspects that can be a reference in identifying lemongrass wood include anatomical structure (macro and micro properties) based on the trunk (base, middle and end). The results of research identifying the anatomical properties of lemongrass wood on various parts of the trunk provide conclusions of anatomical structure for the macroscopic structure characteristics of lemongrass wood in general do not differ between the position of the base, middle and end and the terrace and sapwood, namely giving the heartwood color brown, has a striped pattern, a rather smooth texture, a smooth tactile effect, somewhat shiny, has a smell like lemongrass or telon oil, the hardness is rather hard and heavy. The microscopic structural characteristics of lemongrass medang wood in the position of lemongrass medang logs (base, middle and tip) show that in general wood fibers experience an increase in length from pith to leather. Based on testing the quality of wood fiber for pulp and paper use which includes fiber length, Runkle Ratio, Muhlstep Ratio (MR), Felting Power (FP), Flexibility Ratio (FR) and Coefficient of Rigidity (CR) that lemongrass wood fiber is included in quality class III. Quality class III is a class of wood fiber that has tear firmness, rupture resistance and low tensile firmness.   Keywords: macroscopic, microscopic, medang wood, position of the trunk   ABSTRAK Beberapa aspek yang dapat menjadi acuan dalam mengidentifikasi kayu medang sereh ini adalah meliputi struktur anatomi (sifat makro dan mikro) berdasarkan bagian batangnya (pangkal, tengah dan ujung). Hasil penelitian identifikasi sifat anatomi kayu medang sereh pada berbagai bagian batang memberikan kesimpulan struktur anatomi untuk ciri struktur makroskopis kayu medang sereh secara umum tidak berbeda antara posisi pangkal, tengah dan ujung dan bagian teras dan gubalnya yaitu memberikan warna kayu terasnya coklat, mempunyai corak bergaris-garis, tekstur agak halus, kesan raba halus, agak mengkilap, mempunyai bau seperti bau sereh atau minyak telon, kekerasan agak keras dan berat.  Ciri struktur mikroskopis kayu medang sereh secara pada posisi batang kayu medang sereh (pangkal, tengah dan ujung) menunjukkan bahwa secara umum serat kayu mengalami penambahan panjang dari empulur hingga menuju kulit. Berdasarkan pengujian kualitas serat kayu untuk penggunaan pulp dan kertas yang meliputi panjang serat, Runkle Ratio, Muhlstep Ratio (MR), Felting Power (FP), Flexibility Ratio (FR) dan Coeffisien of Rigidity (CR) bahwa serat kayu medang sereh masuk ke dalam kelas mutu III. Kelas mutu III merupakan kelas serat kayu yang memiliki keteguhan sobek, ketahanan pecah dan keteguhan tarik yang rendah.   Kata kunci: medang sereh, posisi batang, makroskopis, mikroskopis
Electrokinetic Remediation Treatment of Chromium (Cr) Concentration and Distribution in Soil from the PT Semen Baturaja Cement Factory Environment Alfajrin, Achmad Chalid Afif; Komariah, Rahma Nur; Prasetia, Hendra; Halid, Muhammad Akmal; Aisyara, Arien; Simatupang, Lamtongam; Ghifari, Hamzah Daffa; Widiatama, Angga Jati; Arham, La Ode; Mukti, Aqil Chandra; Ningsih, Dina Widya; Ferdinan, Muhammad Rizky
Journal of Physics and Its Applications Vol 7, No 3 (2025): August 2025
Publisher : Diponegoro University Semarang Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.14710/jpa.v7i3.25377

Abstract

PT Semen Baturaja, a cement production company in South Sumatra, Indonesia, holds a Mining Business License of 103.4 hectares, of which 64.23% was reclaimed during 2017–2021. However, the revegetation success rate remains low at only 9%, potentially due to excessive soil chromium (Cr) accumulation. This study investigates the application of electrokinetic remediation to reduce Cr concentrations and improve soil conditions for revegetation. The experiment was conducted on soil samples collected from Disposal Area 4 of PT Semen Baturaja, using a laboratory-scale setup with copper electrodes powered by a 20 V direct current, applied continuously for 48 hours. The results showed that Cr ions tend to migrate toward the anode due to electromigration, while redox reactions influence Cr distribution over time. The highest treatment efficiency was observed in segment one (11.123%), and the lowest in segment three (1.651%). These findings demonstrate the potential of electrokinetic remediation as a viable method for enhancing revegetation in Cr-contaminated post-mining soils.
Effect of Electrokinetic Remediation on the Distribution and Concentration of Lead (Pb) in Ex-Mining Land of PT Semen Baturaja Tbk Rahma Nur Komariah; Achmad Chalid Afif Alfajrin; Arien Aisyara; Muhammad Akmal Halid; Lamtongam Simatupang; Hamzah Daffa Ghifari; Hendra Prasetia; Angga Jati Widiatama; Sabar Sabar; Rhahmi Adni Pesma; Rezki Naufan Hendrawan; Fadli Hastito
Jurnal Fisika Unand Vol 15 No 2 (2026)
Publisher : Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/jfu.15.2.211-220.2026

Abstract

Mining activities can lead to the accumulation of heavy metals in soil, particularly lead (Pb), which poses risks to ecosystems and human health. PT Semen Baturaja Tbk has implemented revegetation as a post-mining reclamation strategy, but the success rate remains low, potentially due to high Pb concentrations in the soil. This study investigates the effectiveness of electrokinetic remediation in mobilizing Pb ions in ex-mining soil using aluminum electrodes under a 20 V direct current over treatment durations of 24 and 48 hours. Soil moisture was maintained at 900 ml, and Pb concentrations were measured using X-Ray Fluorescence (XRF). The results indicate that Pb²⁺ ions migrated towards the cathode, with a significant accumulation observed after 48 hours. However, an increase in Pb concentration near the anode was also detected, likely due to Pb oxidation at the anode plate, leading to remobilization of Pb into the soil. These findings highlight both the potential and limitations of electrokinetic remediation for in-situ heavy metal removal in post-mining land reclamation.
Pemberdayaan KTH Wono Harjo melalui Mekanisasi Pengolahan dan Pemasaran Digital Minyak Kemiri Rio Ardiansyah Murda; Rahma Nur Komariah; Eka Nur’azmi Yunira; Maisatul Muawanah; Almas Sasya Adelia Safira; Ahmad Ardiantama; M Galih Cahya Negara
Jurnal Pengabdian kepada Masyarakat Nusantara Vol. 7 No. 2 (2026): Edisi Mei - Agustus
Publisher : Lembaga Dongan Dosen

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55338/jpkmn.v7i2.8222

Abstract

KTH Wono Harjo di Kabupaten Pesawaran memiliki potensi produksi 7 000 kg biji kemiri per tahun, namun kapasitas produksi minyak kemiri masih sekitar 500 liter per tahun karena proses ekstraksi yang masih manual dan belum adanya sistem pemasaran digital. Kegiatan ini dirancang untuk meningkatkan kapasitas produksi sekaligus memperluas jangkauan pemasaran melalui mekanisasi ekstraksi dan pelatihan pemasaran digital. Tahap persiapan meliputi survei kebutuhan, wawancara dan observasi awal untuk mengidentifikasi masalah mitra, dilanjutkan dengan pengadaan serta instalasi alat ekstraksi semi otomatis dan penyusunan modul pelatihan. Tahap pelaksanaan terdiri atas pelatihan teknis pengoperasian dan perawatan alat, pelatihan pembuatan konten pemasaran digital dan penggunaan media sosial, serta pendampingan mahasiswa dalam pengelolaan akun pemasaran selama tiga bulan. Evaluasi dilakukan melalui uji pre-test dan post‑test, pencatatan kapasitas produksi, serta monitoring keterlibatan konsumen di kanal digital. Hasilnya, kapasitas produksi meningkat menjadi ±1 050 liter per tahun, waktu ekstraksi berkurang 40%, rendemen minyak lebih stabil, dan skor pengetahuan anggota KTH mengenai digital marketing meningkat dari 38% menjadi 81 %. Akun media sosial baru memperoleh lebih dari 300 pengikut dalam dua bulan dan terjadi peningkatan penjualan sebesar 60% dibandingkan periode sebelumnya. Program ini menunjukkan bahwa mekanisasi dan pemasaran digital dapat meningkatkan efisiensi produksi, mutu produk, dan jangkauan pasar secara signifikan. Rekomendasi untuk keberlanjutan meliputi pemeliharaan rutin alat ekstraksi, pelatihan lanjutan, dan kolaborasi dengan dinas terkait untuk memperluas jaringan pemasaran.