Claim Missing Document
Check
Articles

Found 16 Documents
Search

KOPOLIMERISASI CANGKOK POLISTIRENA DARI GUGUS MONOMER ASAM ADIPAT DENGAN INISIATOR BENZOIL PEROKSIDA (BPO) Dewi, Ratna Sari
JURNAL PENELITIAN SAINTIKA Vol 11, No 2 (2011): SEPTEMBER 2011
Publisher : JURNAL PENELITIAN SAINTIKA

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Salah satu metode untuk memodifikasi molekul dalam suatu polimer dapatdilakukan dengan cara pencangkokan. Dalam penelitian ini telah dilakukanpencangkokan dari gugus reaktif asam adipat pada polistirena dengan inisiatorbenzoil (BPO). Proses pencangkokan dimulai terbentuknya radikal dari polistirenadan memvariasikan monomer asam adipat 0, 1- 0,6 g. Hasil yang diperolehmenunjukkan telah terjadinya kopolimerisasi cangkok dengan uji termalDifferential Thermal Analysis memberikan suhu transisi glas(Tg) kopoimer90,92°C dan suhu dekomposisi sebesar 169,89°C menunjukkan telah terjadikopolimerisasi cangkok dari gugusCOOH dari asam adipat pada polistirenadengan perubahan kalor kopolimerisasi dengan puncak endoterm,
OPTIMALISASI WAKTU ALIR TERHADAP ADSORPSI HIBRID SILIKA KITOSAN PADA SIMULTAN ION LOGAM Ni (II) DAN Cd (II) DENGAN METODE EKSTRAKSI FASE PADAT (EFP) Simatupang, Lisnawati; Dewi, Ratna Sari; Samosir, Sri Rezeki
JURNAL PENELITIAN SAINTIKA Vol 14, No 1 (2014): Maret 2014
Publisher : JURNAL PENELITIAN SAINTIKA

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Preparation of hybrid silica chitosan adsorben and used toadsorb heavy metals Ni(II), Cd(II) have been done. The research aims tofind out effeciency and selectivity of the hybrid silica chitosan to adsorbsheavy metals Ni(II) and Cd(II) using solid phase extraction method. Silica used is rice husk ash while chitosan used material is essentialy the shrimp shell. Previous research data shows that the optimum hybrid silica chitosan ratio is 20:4% ( 20 mL of sodium silicate solution : 0.4g chitosan in 10 mL of acetate 2%) with surface area of 189.405 m²/g. To determine the level of effectiveness and selectivity of adsorben was carried out on the variation of flow time (20,40,60,80,100) minutes. Result showed that the amount of metals ions tend to increased the following increase the flow time. The optimum condition at the time of 60 minutes, after wich the amount of metals ion adsorbs decreased. At the flow time of 60 minutes the amount of metal adsorbs for Ni(II) 58.1755 mg/L, Cd(II) 49.7392 mg/L . Solid phase extraction (SPE) method using hybrid silica more effective in adsorb chitosan adsorb was metal Ni(II) compared metal Cd(II) by order of the strenght of adsorptions Ni(II) > Cd(II)   
PERBEDAAN HASIL BELAJAR KIMIA PESERTA DIDIK DENGAN METODE PROBLEM SOLVING DAN METODE INVESTIGASI Ratna Sari Dewi
Faktor Jurnal Ilmiah Kependidikan Vol 1, No 2 (2014): Faktor : Jurnal Ilmiah Kependidikan
Publisher : Universitas Indraprasta PGRI, Jakarta, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (386.002 KB) | DOI: 10.30998/fjik.v1i2.344

Abstract

Abstract This study aims to obtain empirical evidence about differences in learning outcomes of students who are taught to approach and Problem Posing Approach to the investigation material the chemical bondin Class X SMA Harapan 1 Medan shavings Academic Year 2013/2014 . The method used was experimental . The population was class X SMA Harapan 1 Medan shavings Academic Year 2013/2014 which consists of two classes , the X - 1 as the experimental group and class X - 2 as a control group class (applying investigative approach.). To obtain the necessary data in this study used a test in the form of a description as much as 6 questions . The data were analyzed with statistical analysis .From the analysis of data obtained by the average and standard deviation of students who are taught to approach and Problem Posing. Mean and standard deviation of students who are taught to approach  and  Investigation   and   . Keywords : Problem Posing Approach , investigative approach , the chemical bond
HUBUNGAN KECERDASAN EMOSIONAL (EQ) DAN MOTIVASI BELAJAR TERHADAP HASIL BELAJAR KIMIA SISWA SMA Hafni Indriati Nasution; Ratna Sari Dewi; Hilda Junanda Br. Harahap
Jurnal Pendidikan Kimia (JPKim) Vol 6, No 3 (2014): Desember
Publisher : Pascasarjana Universitas Negeri Medan

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (243.991 KB) | DOI: 10.24114/jpkim.v6i3.5530

Abstract

Abstract This Research intents to know wheather there is relation between emotional  intellegence and study motivation towards the result of studying chemistry sample that is being used is XI th grader of Setia Budi  Abadi Perbaungan High School terms 2013/2024 which consist of 52 students who are separated in to two class.Valid questionnaire is used to determine their emotional intelligences and study motivation. The 14 Questions for emotional intelligence and 13 questions for study motivation.While chemistry student learning outcome data obtained   from chemistry subject teacher.Data has been checked the normality by using liliefors test,for emotional intelligence obtained Lcount = 0,01149, where as for study motivation Lcount= 0,002167,and Ltable= 0,122866,with the result of that  Lcount> Ltable.Which means,the data distributed normally from the result of the hypotesis using multiple corelation test,show that there is positive relation between emotional intelligence and study motivation to chemistry student learning result with enough interpretation.Correlation’s significance is tested with F test at significance level of α= 0,05 with numerator dk 2 and denominator dk 49 show that Ftable= 3,19, while Fcount= 5,536645 (Fcount>F table) which means the relation between emotional  intelligence and study motivation with chemistry student learning result is real andabsolutely relevant statistically (significant). By counting the coefisien of determination gets the big impact of emotional intelligence and study motivation to wards chemistry student learning result is 18,23%. Keyword:Emotional Intellegence (EQ),Study Motivation,Result of studying
OPTIMALISASI pH UNTUK MENINGKATKAN EFEKTIFITAS DAN SELEKTIFITAS ADSORBEN HIBRID SILIKA PADA SIMULTAN ION LOGAM DIVALENT Zn(II) DAN Cd(II) DENGAN METODE EKSTRAKSI FASE PADAT Lisnawaty Simatupang; Ratna Sari Dewi; Boston Sidabutar
Jurnal Pendidikan Kimia (JPKim) Vol 6, No 3 (2014): Desember
Publisher : Pascasarjana Universitas Negeri Medan

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (318.733 KB) | DOI: 10.24114/jpkim.v6i3.5533

Abstract

Abstrak Telah dilakukan penelitian tentang pembuatan adsorben hibrid silika kitosan dan aplikasinya untuk menyerap logam berat Zn(II) dan Cd(II). Silika diperoleh dari abu sekam padi, sedangkan kitosan diperoleh dari kulit udang. Pada penelitian sebelumnya telah dilakukan bahwa perbandingan silika kitosan yang optimum yaitu 20:4% (20 mL larutan natrium silikat : 0,4 gram kitosan dalam 10 mL asetat 2%) dengan luas permukaan 189,405 m2/g. Adsorpsi simultan Zn(II) dan Cd(II) dilakukan dengan metode ekstraksi fase padat (EFP) yang dilakukan dengan variasi pH larutan 4, 5, 6, 7, 8 yang bertujuan untuk menentukan pH optimum dalam proses adsorpsi. Hasil pengukuran dengan menggunakan SSA menunjukkan bahwa Jumlah ion logam Zn(II) dan Cd(II) teradsorpsi maksimum pada pH adsorpsi = 6, dengan jumlah ion logam Zn(II) yang teradsorp lebih besar dibandingkan dengan ion logam Cd(II). Jumlah logam yang teradsorp pada pH 6 untuk logam Zn(II) adalah 44,96 mg/L, sedangkan untuk logam Cd(II) adalah 0,56 mg/L. Metode Ekstraksi Fase Padat (EFP) dengan menggunakan adsorben hibrid silika kitosan lebih selektif dan efektif dalam menyerap ion logam Zn(II) yang mampu mengadsorpsi hingga mencapai 20,51% sedangkan untuk ion logam Cd(II) hanya 0,3%. Kata Kunci : adsorben, hibrid silika kitosan, pH, ekstraksi fase padat (EFP)
PERBAIKAN PEMBELAJARAN KULIAH KIMIA ANORGANIK MELALUI PENGAYAAN DAN PENGGUNAAN ALAT PERAGA PADA PENDEKATAN PEMBELAJARAN KOOPERATIF DENGAN BANTUAN PETA KONSEP Lisnawaty Simatupang; Ratna Sari Dewi
Jurnal Pendidikan Kimia (JPKim) Vol 6, No 1 (2014): April
Publisher : Pascasarjana Universitas Negeri Medan

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (320.906 KB) | DOI: 10.24114/jpkim.v6i1.5473

Abstract

Abstrak Telah dilakukan teaching grant perbaikan pembelajaran kuliah Kimia Anorganik  melalui pengayaan dan penggunaan alat peraga pada pendekatan pembelajaran kooperatif dengan bantuan peta konsep di Jurusan Kimia FMIPA UNIMED Medan untuk mahasiswa S1 Pendidikan Kimia 2008 B. Penelitian ini bertujuan untuk meningkatkan interaksi dan hasil belajar kuliah rumpun Kimia Anorganik berbasiskan kompetensi dan mengintegrasikan dengan softskill yang diharapkan dalam perkuliahan, memperbaiki interaksi dosen-mahasiswa dan mahasiswa dengan mahasiswa. Penelitian ini dirancang dalam 4 tahapan yakni : Perencanaan perbaikan Silabus, RPP dan kontrak perkuliahan. Pengembangan modul ajar melalui akses internet, Pelaksanaan pembelajaran melalui kaji tindak (Action research) serta monitoring dan evaluasi setiap siklus tindakan yang dilakukan. Perbaikan Silabus, RPP, Kontrak Perkuliahan telah dilakukan dengan pengintegrasian softskill dan penyesuaian model dan metode sehingga dihasilkan satu dokumen. Sedangkan perbaikan instrument test  dihasilkan 5 set instrument test sesuai dengan pokok bahasan yang diajarkan dan satu instrument angket. Hasil penelitian ini menunjukkan bahwa kemampuan kognitif meningkat di lihat dari pretest 1  nilai rata-rata 50,76 sampai pretest 5 nilai rata-rata menjadi 65,30, Untuk nilai rata - rata posttest mengalami peningkatan yang signifikan dari posttest 1 61,52 menjadi 85,91 pada posttest ke-5. Persentase jumlah mahasiswa 2008 Dik B  yang mampu menyelesaikan mata kuliah kimia Anorganik I sebanyak 87,87%. nilai rata-rata item softskill sebesar 78,86 (Komponen yang muncul : Integritas/kejujuran, Berbicara dengan niat baik, komitmen untuk belajar, tanggungjawab sebagai mahasiswa dan sikap yang luwes dalam mengikuti perkuliahan. Cara berkomunikasi yang baik, teknik meminta maaf bila membuat kekeliruan dan sikap yang membangun ikatan persahabatan, konsentrasi dalam belajar, mengorganisasi dengan pikiran dan membaca cepat, rasa empati sesama mahasiswa, mengeneralisasi contoh dan pendapat serta rasa kemanusiaan). Kata Kunci: Strategi Pembelajaran,Pembelajaran Kooperatif, Peta Konsep, Kemampuan Kognitif, Media Alat peraga
PERBEDAAN HASIL BELAJAR KIMIA SISWA MENGGUNAKAN MODEL PEMBELAJARAN TGT (TEAMS GAMES TOURNAMENT) DENGAN MEDIA MIND MAPPING DAN MOLYMOOD PADA POKOK BAHASAN HIDROKARBON Ratna Sari Dewi
Jurnal Pendidikan Kimia (JPKim) Vol 7, No 1 (2015): April
Publisher : Pascasarjana Universitas Negeri Medan

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (348.292 KB) | DOI: 10.24114/jpkim.v7i1.5499

Abstract

Abstract This research was purpose to know the effect of  TGT (Team Games Tournament) learning model with Molymood to student chemistry learning outcomes on teaching Hydrocarbon.  The type of this research is quasy-experiment using random group pretest-posttest design. The 2 class of X students of some SMA Negeri in Medan used as a sample, a class was teach  by TGT model using mind mapping media and another with molymood media. The research data analysed using two side T-test. The  research result show that there is a differences of student learning outcomes between student teach using TGT model with mind mapping media accompanying molymood media. It shows that the student teaching by TGT model using molymood give increasing learning output approx 70.9%, while TGT model with mind mapping media 54.2% Keyword: Teams Games Tournaments (TGT), Mind Mapping, Molymood, Hydrocarbon
Selektivitas Ligan DBDTP Terhadap Isomer Ligan Dbdtp untuk Ekstraksi Logam Tanah Jarang Berdasarkan Kajian Simulasi Dinamika Molekuler Ratna Sari Dewi; Abdul Mutholib; Anni Anggraeni; Hesein H. Bahti; Ari Hardianto; Muhammad Yusuf
al Kimiya: Jurnal Ilmu Kimia dan Terapan Vol 6, No 2 (2019): al Kimiya: Jurnal Ilmu Kimia dan Terapan
Publisher : Department of Chemistry, Faculty of Science and Technology, UIN Sunan Gunung Djati Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15575/ak.v6i2.6504

Abstract

Logam tanah jarang (LTJ) merupakan suatu material strategis nasional. Tingkat kebutuhan terhadap LTJ semakin lama semakin meningkat pesat. Pemisahan LTJ dapat menggunakan berbagai metode pemisahan, salah satunya dengan menggunakan ligan pengompleks. Ligan Dibutyl dithiophosphate (DBDTP) memiliki banyak keuntungan ketika digunakan sebagai ekstraktan dalam ekstraksi. Simulasi komputer membutuhkan suatu metode akurat dalam memodelkan sistem yang dikaji. Simulasi sering dilakukan dengan kondisi yang sangat mirip dengan eksperimen, sehingga hasil perhitungan kimia komputasi dapat dibandingkan secara langsung dengan eksperimen. Tujuan dari penelitian ini adalah untuk membandingkan prediksi pemisahan ekstraksi LTJ (Sm dan Gd) menggunakan ligan DBDTP dan isomer ligan DBDTP dengan menghitung kestabilan kompleks berdasarkan dinamika molekuler. Ligan DBDTP dan Isomer ligan DBDTP dibuat dengan program BIOVIA Discovery studio 2016, lalu  dihubungkan dengan atom pusat dan dilakukan optimasi energi menggunakan program AMBER 16, kemudian disimulasikan dengan sistem satu pelarut selama 10 ns secara eksplisit..Hasil simulasi kompleks UTJ dengan isomer ligan DBDTP dan tiga air secara dinamika molekuler menunjukkan bahwa semakin kecil radian atom maka semakin kecil nilai energi ikatan dan semakin stabil. Energi untuk masing-masing kompleks LTJ (Sm dan Gd) untuk ligan DBDTP adalah -40,43 dan -121,13 Kkal/mol dan ligan isomer DBDTP sebesar -287,62 dan -438,38 Kkal/mol. Hal ini menunjukkan bahwa kompleks LTJ (Sm dan Gd) dengan isomer ligan DBDTP lebih stabil dibandingkan dengan ligan DBDTP.
Preparation and Characterization of Adsorbents from Kluwak Shell (Pangium edule) Modified by Surfactant of HDTMA-Br Ananda, Zhafira Dwika; Dewi, Ratna Sari
Journal of The Indonesian Society of Integrated Chemistry Vol. 16 No. 1 (2024): Journal of The Indonesian Society of Integrated Chemistry
Publisher : Pendidikan Kimia FKIP Universitas Jambi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22437/jisic.v16i1.33946

Abstract

This research aims to determine the characteristics of adsorbents made from kluwak shell activated carbon modified by HDTMA-Br surfactant. Providing adsorbents is carried out using the contacting method. The FTIR characterization results show the presence of the CH3 from N-(  group possessed by the HDTMA-Br surfactant at wave number 1500 . SEM characterization shows that the morphology of HDTMA-Br surfactant modified active carbon appears to have a surface with some of the pores closed due to electrostatic interactions compared to unmodified active carbon which has open pores. The results showed that the functional groups and morphology of activated carbon changed after contact with HDTMA-Br surfactant which was related to the absorption capacity of activated carbon.
Effectiveness of HDTMA-Br Surfactant Modified Jackfruit Peel Activated Carbon Adsorption on Methylene Blue Nabillah, Ghoiriah; Dewi, Ratna Sari
Indonesian Journal of Chemical Science and Technology (IJCST) Vol 7, No 2 (2024): JULY 2024
Publisher : Universitas Negeri Medan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24114/ijcst.v7i2.62259

Abstract

Jackfruit peels are usually considered as waste and cause environmental pollution. However, banana peels can be used as an adsorbent material to reduce the impact of methylene blue dye use because they contain high lignocellulose. This study aims to determine the characterization, optimum mass and optimum time. Adsorbents are made using dried and carbonized jackfruit skin at a temperature of 400°C for 2 hours. After the carbonization process, the adsorbent was activated using 5 M potassium hydroxide for 4 hours. . Based on the research results, it shows that the optimum mass of carbon is found at a mass of 0.16 grams and the optimum mass for activated carbon and HDTMA Br activated carbon occurs at a mass of 0.07 grams. Meanwhile, the optimum time for carbon was 60 minutes and for activated carbon and HDTMA Br activated carbon was 45 minutes.