Garuda - Garba Rujukan Digital

Internet of Things (IoT) in Agriculture Industries Erry Yulian Triblas Adesta; Delvis Agusman; Avicenna Avicenna
Indonesian Journal of Electrical Engineering and Informatics (IJEEI) Vol 5, No 4: December 2017
Publisher : IAES Indonesian Section

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.52549/ijeei.v5i4.373

The IoT applications in the agriculture industry are intertwined in many ways, creating a hybrid construct of traditional businesses with digital connectivity implementations. Strategic issues and principles on the assimilation of IoT solutions are prevail through time: investment costs, data interconnectivity, management and analysis, as well as data security. The agriculture industry is expected to be always alerted for the changes that may apply, with all the contemporary challenges and future directions responding to the situations, so it can reap the optimum use of the IoT connectivity.

Integrated Engineering Project Management Approach for Typical Small to Medium Manufacturing Companies Erry Yulian Triblas Adesta; Mohammed Abdullah K B; Yahya A Alazemi
Indonesian Journal of Electrical Engineering and Computer Science Vol 8, No 2: November 2017
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijeecs.v8.i2.pp541-545

The aim of this paper is to identify the problem extents and successfully applying project management in SMEs with a focus on manufacturing industries. The organization of the study was mainly divided into the activity of literature study and the investigation through a survey conduct aimed to measure the awareness and implementation of project management at the selected SMEs in Malaysia. The questionnaire was designed with a section (Section A) involving project management in general and another section (Section B) involving the implementation of it. It was found that the level of awareness and implementation of project management especially in the selected small and medium manufacturing companies in Malaysia was quite satisfying. Most of the manufacturing companies were implementing project management, but the level was depending on the organization in the company itself.

Penyempurnaan Sistem Inkubator Bayi Berbasis FLC Menggunakan Algoritma Genetika Setiyo Budiyanto; Lukman Medriavin Silalahi; Dadang Gunawan; Erry Yulian Triblas Adesta
JURNAL INFOTEL Vol 15 No 3 (2023): August 2023
Publisher : LPPM INSTITUT TEKNOLOGI TELKOM PURWOKERTO

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20895/infotel.v15i3.991

This research problem focuses on treating premature babies due to hypothermia so that the baby must be put in an incubator for several days. Conventional intensive care method in premature babies, namely skin-to-skin care method between mother and child. Meanwhile, the latest technological developments, the method is already based on electrical-Internet of Things (IoT) engineering. This research proposes the design of an IoT-based prototype known as a smart incubator. This prototype has been equipped with a real-time monitoring system and system settings using the mamdani fuzzy inference system control method and combined using the Genetic Algorithm (GA) method. The results showed that the ideal temperature range in the smart incubator was 33° C with an accuracy of 99.97% and was in accordance with the fuzzy membership degree in the range of 29° C ≤x≤ 37° C. Furthermore, the ideal relative humidity range in the smart incubator was 60% with an accuracy of 98.60% and was in accordance with the fuzzy membership degree in the range of 59 ≤x≤ 65. Then, the noise range in the smart incubator is 37.9dB to 56.8dB with an accuracy of 96.44% and has been appropriate at the fuzzy membership degree. At a maximum distance of 50cm, it takes 8 seconds for the prototype to detect movement as a safety measure.

PENERAPAN JSA SEBAGAI UPAYA PENCEGAHAN KECELAKAAN KERJA DALAM KEGIATAN PERBAIKAN INTERNAL PART & BURNER TILE SHERINA DWI LESTARI; ERRY YULIAN TRIBLAS ADESTA; ATIDIRA DWI HANANI
GANEC SWARA Vol 18, No 4 (2024): Desember 2024
Publisher : Universitas Mahasaraswati K. Mataram

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35327/gara.v18i4.1161

In this company, annual factory repair activities or Turn Around (TA) is a periodic maintenance program of factory facilities, where various work activities are carried out in a certain period of time, and involve so many people with various levels of expertise and work skills. This research was taken using a qualitative research method, namely by describing how the application of Job Safety Analysis (JSA) is carried out on internal part repair work and burner tile replacement in Turn Around (TA) activities in accordance with existing conditions, developing commitments and policies, or ongoing processes. The results of the reseacrh obtained based on in-depth observation and interviews found several potential hazards in this work, including the fall of the workpiece (18 work steps) 2 medium and 16 high, height (13 work steps) 3 medium and 10 high, dusty conditions (19 work steps) 3 medium and 16 high, gas poisoning (16 work steps) 1 medium and 15 high, hot conditions (17 work steps) 3 medium and 14 high, pinched (11 work steps) 2 medium and 9 high, and sparks (5 work steps) 1 medium and 4 high. The application of Job Safety Analysis in evaluating this job shows that comprehensive hazard identification, accurate risk analysis, implementation of effective preventive measures, and adequate training and supervision to ensure work safety

IMPLEMENTASI SISTEM TANGGAP DARURAT KEBAKARAN PADA GEDUNG UTAMA DI INDUSTRI PUPUK MUHAMMAD DIMAS; AGUS GETER EDY SUTJIPTO; ERRY YULIAN TRIBLAS ADESTA
GANEC SWARA Vol 18, No 4 (2024): Desember 2024
Publisher : Universitas Mahasaraswati K. Mataram

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35327/gara.v18i4.1123

A fire emergency response system is a series of procedures that must be carried out when a fire occurs to protect the safety of building occupants. The main objective of this final project is to ensure that the fire emergency response system in the main building of in the fertilizer industry. can function well when a fire occurs and can protect the safety of all main building employees. This research uses a qualitative research method which uses two types of data, namely primary data with in-depth interviews and observations, and secondary data from document reviews, company archives and literature studies. The results and discussion based on variables related to the implementation of the fire emergency response system can be concluded that the informants implemented the fire emergency response system procedures well and in accordance with established regulations. This is proven based on observations that in the main building of PT.X already has a fire emergency response system, such as a fire detection and alarm system, fire extinguishing system, evacuation routes, gathering points and other supporting equipment. Apart from that, there are also evacuation procedures, training and simulations, as well as maintenance of a fire emergency response system that is complete and in accordance with established regulations.

POTENSI BAHAYA DAN RISIKO DENGAN METODE HIRADC PADA PROSES OPERASIONAL INDUSTRI PETROKIMIA PADA PERGANTIAN ADSORBENT 201-D PABRIK 1-B MARIA AGNES TUTO RUING; ERRY YULIAN TRIBLAS ADESTA; ATIDIRA DWI HANANI
GANEC SWARA Vol 18, No 4 (2024): Desember 2024
Publisher : Universitas Mahasaraswati K. Mataram

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35327/gara.v18i4.1160

The implementation of HIRADC (Hazard Identification Risk Assessment and Determinant Control) is one of the efforts that can be made to control potential hazards that cause work accidents. HIRADC (Hazard Identification Risk Assessment and Determinant Control) is the process of identifying hazards, assessing, and evaluating the risks contained in work activities and environments. The results of the risk evaluation are used to determine hazard control efforts so that they can reduce the level of risk that is likely to cause work accidents. The method used to complete the research results has achieved the expected objectives. The data presented uses a qualitative descriptive approach, which shows K3 in accordance with current conditions, developing policies, ongoing processes, and effects that occur or trends that are occurring in the company. These results are compared with data obtained in the field or from the HSE regarding the implemen- tation procedure of HIRADC (Hazard Identification Risk Assessment and Determi- nant Control) and compared with applicable standards. Based on the identification that has been carried out, 42 potential hazards have been identified from 21 stages of work activities, 6 of which are in the high risk category, 20 are in the low risk category, 16 are in the medium risk category. Furthermore, all these activities or processes are then analyzed in the HIRADC table and converted into percentages for each category to determine the risk priority. The results for the low risk level are 0.47%, the medium risk level is 0.38%, and the high risk level is 0.14%. This company has made efforts to reduce potential hazards in the work environment through substitution, engineering control, administrative control, and finally PPE

Hazard Identification and Risk Assessment (Hira) Analysis of Nanotechnology Laboratory in Universities in Indonesia Kustono, Djoko; Puspitasari, Poppy; Irsyad, Muhammad Al; Nursabrina, Aisya; Adesta, Erry Yulian Triblas
International Journal of Mechanical Engineering Technologies and Applications Vol. 2 No. 1 (2021)
Publisher : Mechanical Engineering Department, Engineering Faculty, Brawijaya University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21776/MECHTA.2021.002.01.6

The article describes a concept of health and safety to conduct research in Nanomaterial Laboratory in Two Public University in Malang, East Java, Indonesia. The utilization of nanomaterials in the world of education has been done in two universities in Malang, namely Malang State University and Brawijaya University. The nanomaterial laboratory as a means for research and development of nanomaterial science that often creates hazards and risks of work accidents for its users, but things that are often not realized. Dangers and risks of work accidents caused by the absence of standards. This research focuses on hazards and accidents in the nanomaterial laboratory using the HIRA (Hazard Identification and Risk Assessment) method, which is then followed by a variety of independent variables. The population in this study were nanomaterial researchers at two universities in Malang. Based on the results of trials between respondents 'competency expertise with the level of risk of workplace accidents in the nanomaterial laboratory obtained p- value 0.00 (<0.05), meaning that there is a significant relationship between the respondents' scientific conservation and the level of work accident risk in the nanomaterials laboratory. Furthermore, the results of the study were also obtained between the research respondents with the level of risk of work accidents in the nanomaterial laboratory with a p-value of 0.00 (<0.05), meaning that there was a significant correlation between the respondent's research experience and the level of work accident risk in the nanomaterial laboratory.

Identification of Occupational Accident Risks in Nanomaterial Laboratories in Higher Education Based on Human Factors Kustono, Djoko; Puspitasari, Poppy; Irsyad, Muhammad Al; Nursabrina, Aisya; Adesta, Erry Yulian Triblas
International Journal of Mechanical Engineering Technologies and Applications Vol. 2 No. 1 (2021)
Publisher : Mechanical Engineering Department, Engineering Faculty, Brawijaya University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21776/MECHTA.2021.002.01.12

The article describes a concept of health and safety to conduct research in Nanomaterial Laboratory in Two Public University in Malang, East Java, Indonesia. The utilization of nanomaterials in the world of education has been done in two universities in Malang, namely Malang State University and Brawijaya University. The nanomaterial laboratory as a means for research and development of nanomaterial science that often creates hazards and risks of work accidents for its users, but things that are often not realized. Dangers and risks of work accidents caused by the absence of standards. This research focuses on hazards and accidents in the nanomaterial laboratory using the HIRA (Hazard Identification and Risk Assessment) method, which is then followed by a variety of independent variables. The population in this study were nanomaterial researchers at two universities in Malang. Based on the results of trials between respondents 'competency expertise with the level of risk of workplace accidents in the nanomaterial laboratory obtained p- value 0.00 (<0.05), meaning that there is a significant relationship between the respondents' scientific conservation and the level of work accident risk in the nanomaterials laboratory. Furthermore, the results of the study were also obtained between the research respondents with the level of risk of work accidents in the nanomaterial laboratory with a p-value of 0.00 (<0.05), meaning that there was a significant correlation between the respondent's research experience and the level of work accident risk in the nanomaterial laboratory.

Islamic Education Teachers’ Technological Pedagogical Content Knowledge (TPACK): A Study in Indonesia Eliyanto; Erry Yulian Triblas Adesta; Siti Fatimah
Edukasia Islamika : Jurnal Pendidikan Islam Vol 6 No 2 (2021): Edukasia Islamika - Jurnal Pendidikan Islam
Publisher : Universitas Islam Negeri K.H. Abdurrahman Wahid Pekalongan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.28918/jei.v6i2.625

This study aims to analyze the knowledge ability of Islamic education teachers about TPACK knowledge. This research is a qualitative research that involved 25 Islamic education teachers from various schools in Kebumen regency as the research subject. The instruments that used in this study were observation sheets and interview sheets. The data analysis technique which used was the model developed by Miles and Huberman, namely data collection, data reduction, data display, and conclusions. The results of the study prove that the knowledge of Islamic education teachers on TPACK is quite high. However, integrating technology effectively and applying various types of appropriate technology into Islamic religious learning should be improved. Some of the solutions that can be offered are by providing adequate facilities in implementing TPACK, understanding and training of TPACK, and continuous TPACK practices.

Pengaruh Keselamatan dan Kesehatan Kerja (K3) terhadap Produktivitas Kerja pada Pabrik Kelapa Sawit (PKS) Malata PT. Tanjung Sawit Abadi (SSMS GROUP) di Kalimantan Tengah Putra, Nimro Muhammad Naufal Dwi; Sutjipto, Agus Geter Edy; Adesta, Erry Yulian Triblas
Indonesian Research Journal on Education Vol. 4 No. 4 (2024): irje 2024
Publisher : Fakultas Keguruan dan Ilmu Pendidikan, Universitas Pahlawan Tuanku Tambusai

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31004/irje.v4i4.1331

Penelitian ini bertujuan mengetahui pengaruh keselamatan dan kesehatan kerja terhadap produktivitas kerja pada pabrik kelapa sawit (PKS) Malata PT. Tanjung Sawit Abadi (SSMS Group) di Kalimantan Tengah. Penelitian ini menggunakan kuesioner sebagai teknik pengumpulan sampel, kuesioner akan dibagikan kepada 100 sampel orang karyawan pabrik. Variabel yang diamati dalam penelitian ini terdiri dari keselamatan dan kesehatan kerja dengan indikator tempat kerja, mesin dan peralatan, jaminan keselamatan, keadaan dan kondisi karyawan, lingkungan kerja, perlindungan karyawan. Sedangkan variabel produktivitas kerja indikatornya terdiri dari kuantitas kerja, kualitas kerja, dan ketepatan waktu. Uji data dilakukan dengan validitas dan reliabilitas, sedangkan analisis data menggunakan regresi linier berganda, dengan uji hipotesis menggunakan koefisien determinasi dan uji parsial. Hasil penelitian ini menunjukkan bahwa keselamatan dan kesehatan kerja (K3) berpengaruh positif signifikan terhadap produktivitas kerja di PKS Malata Kalimantan Tengah. dapat disimpulkan bahwa variabel keselamatan kerja (X1) dan kesehatan kerja (X2) berpengaruh signifikan terhadap variabel produktivitas kerja (Y) dengan nilai thitung masing-masing sebesar 3.385 dan 3,709 dengan nilai signifikansi masing-masing 0,001 dan 0,000. Dan nilai konsisten produktivitas kerja di PKS Malata (Y) sebesar 7,218 satuan.

Title

Found 12 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 12 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 12 Documents
Search