Claim Missing Document
Check
Articles

Found 5 Documents
Search
Journal : Kappa Journal

Perancangan Generator Ultrasonik Untuk Membunuh Bakteri Escherichia coli (E. coli) I Made Satriya Wibawa; I Ketut Putra
Kappa Journal Vol 6 No 2 (2022): Desember
Publisher : Universitas Hamzanwadi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29408/kpj.v6i2.6886

Abstract

Telah dirancang generator ultrasonik sebagai pembunuh bakteri Escherichia coli (E. coli). Range frekuensi yang dihasilkan oleh generator ultrasonik ini berkisar antara 50 kHz - 65 kHz. Dari hasil pengamatan kematian bakteri E. coli yang ditimbulkan akibat radiasi gelombang ultrasonik terhadap variasi jarak dan frekuensi yang digunakan pada kerapatan 10-8 cfu/ml (coloni forming unit/ml) diperoleh persentase rata-rata kematian bakteri E. coli yang ditimbulkan meningkat apabila jarak radiasi semakin dekat dan frekuensi yang digunakan tinggi.  Bakteri E. coli setelah diradiasi dengan gelombang ultrasonik mengalami kelainan sel yaitu terjadi pengecilan bentuk sel, dinding selnya pecah dan mengalami lysis.
PERANCANGAN ALAT UKUR KELEMBABAN TANAH MENGGUNAKAN CAPACITIVE SOIL MOISTURE SENSOR BERBASIS ANDROID Tri Jaya Maghuna, Komang; Wibawa, I Made Satriya; Suardana, Putu; Widagda, I. G. A; Trisnawati, Ni Luh Putu; Kasmawan, I Gde Antha
Kappa Journal Vol 8 No 2 (2024): Agustus
Publisher : Universitas Hamzanwadi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29408/kpj.v8i2.25122

Abstract

A soil moisture measuring instrument has been designed and created using an Android-based capacitive soil moisture sensor. The design of a soil moisture measuring instrument was made to understand how to design, how it works, and the results of calibration. The process of calibrating and applying the design tool is carried out by comparing the results of soil moisture measurements between the design tool and the reference tool. The calibration itself was carried out using black sand soil into which 0 ml, 10 ml, 30 ml, 50 ml and 70 ml of water were poured periodically. The reference tool used is the soil moisture meter pH tester VT05 with type ZD-05. Data collection is carried out by inserting a capacitive soil moisture sensor into the soil. There are five types of soil used during application, namely white sand soil, black sand soil, limestone soil, clay soil and humus soil. The results of calibration using linear regression between the design tool and the reference tool obtained a gradient value m of 0.9643, close to 1. The coefficient of determination value obtained during calibration was 0.9983, so the level oflinearity between the design tool and the reference tool was 99.83%. The results of applying linear regression between the design tool and the reference tool obtained a gradient value m of 1.0041, close to 1. The coefficient of determination () obtained when applying was 0.9982, so the level of linearity between the design tool and the reference tool was 99.82%. From the results of the calibration and application of the tool, it shows that the tool design has good validity (precise accuracy). 
Analisis Laju Dosis Radiasi Neutron Pada Pekerja Radiasi Menggunakan Surveymeter di Instalasi Radioterapi Ida Bagus Putu Priastana Bawa; Ni Nyoman Ratini; Wayan Balik Sudarsana; Gusti Ngurah Sutapa; I Made Satriya Wibawa; I Gde Antha Kasmawan; Rozi Irhas
Kappa Journal Vol 8 No 3 (2024): Desember
Publisher : Universitas Hamzanwadi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29408/kpj.v8i3.27296

Abstract

The research was carried out at the Radiotherapy Installation at Hospital Prof. Dr. I.G.N.G. Work with the aim of knowing the value of the neutron radiation dose rate at the maximum point after the irradiation is carried out and knowing the value of the neutron radiation dose rate to radiation workers based on the Dose Limit Value permitted by BAPETEN. The research was carried out by measuring the neutron radiation dose rate using a neutron surveymeter at 7 different points with a photon beam of 10 MV energy. At point A, the average value of the neutron radiation dose rate at the maximum point was 6618.87 ± 959.50 µSv/h, at point B it was 1586.99 ± 113.95 µSv/h, at point C it was 1599.90 ± 210.98 µSv/h, at point D it is 1236.83±113.94 µSv/h, at point E it is 297.48±41.79 µSv/h, at point F it is 23.69±3.14 µSv/h h and at point G of 0.54 ± 0.44 µSv/h. Then the value of the equivalent dose rate of neutron radiation at each point is obtained, namely, at point A it is 1.8 µSv/h, at point B 3.2 µSv/h, at point C 3.5 µSv/h, at point D 2 .3 µSv/h, at point E 2.3 µSv/h, at point F 2 µSv/h and at point G 1.9 µSv/h, then the equivalent dose rate value is compared with 1/2 NBD of radiation workers of 5 µSv /h, then the equivalent dose rate value is still below 1/2 of the NBD of radiation workers and the SPO that applies at the Radiotherapy Installation at Hospital Prof. Dr. I.G.N.G. Ngoerah is indeed safe for radiation workers.
Distribution of Radiation Doses Received by Organs at Risk in Cervical Cancer Using Intracavitary Brachytherapy Technique Anandika Putra, I Made Raditya; Sutapa, Gusti Ngurah; Kasmawan, I Gde Antha; Ratini, Ni Nyoman; Wibawa, I Made Satriya; Putra, I Ketut
Kappa Journal Vol 9 No 2 (2025): Agustus
Publisher : Universitas Hamzanwadi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29408/kpj.v9i2.29017

Abstract

A study entitled Distribution of Radiation Doses Received by Organs at Risk in Cervical Cancer Using Intracavitary Brachytherapy Technique has been conducted. The study was conducted at the Radiotherapy Sub-Installation of Prof. Dr. I.G.N.G Ngoerah Hospital with the aim of determining the distribution of doses received by High Risk Clinical Target Volume (D2cc) and Organs at Risk (D90). Determining the distribution of doses received by High Risk Clinical Target Volume (D2cc) and Organs at Risk (D90) in cervical cancer patients is still within the recommended limits in ICRU Report 89. This study used ionizing radiation by inserting radioactive cobalt-60 using internal radiotherapy techniques, namely intracavitary brachytherapy. Before the irradiation process is carried out, there is a planning stage or Treatment Planning System (TPS). The reference for this research standard is for HRCTV of 95% -107% and for OAR bladder ≤80% rectum ≤75%. The average percentage of dose distribution received by HRCTV was 104.2% which is equivalent to 7.2 Gy which is still within the range of 95%- 107%, in the bladder it was 69.4% which is equivalent to 5.Gy which is still below the value ≤80%, and in the rectum it was 57% which is equivalent to 4.1 Gy which is still below the value ≤75%. The dose distribution value in HRCTV and OAR was still within the tolerance limit listed in the recommended value in GEC-ESTRO-ABS, and ICRU Report 89.
Perancangan Alat Ukur Intensitas Cahaya menggunakan Sensor BH1750 Berbasis Mikrokontroler ATMega328P Bano, Tominikus Benyamin; Widagda, I Gusti Agung; Trisnawati, Ni Luh Putu; Wibawa, I Made Satriya; Putra, I Ketut; Sandi, I Nengah
Kappa Journal Vol 8 No 1 (2024): April
Publisher : Universitas Hamzanwadi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29408/kpj.v8i1.24917

Abstract

The design of a light intensity measuring instrument using the BH1750 sensor based on the ATMega328P microcontroller has been successfully created. The results of light intensity data are measured by using the BH1750 sensor which receives a data signal in the form of light intensity. In order to get results that are in accordance with the reference tool, the design of a light intensity measuring instrument by using the BH1750 sensor based on the ATmega328P microcontroller is carried out in the Electronics and Instrumentation Laboratory and Computing Laboratory, Physics Study Program, FMIPA, Udayana University, Jimbaran, Bali. Then the results of the design of tool and reference tool processed into graphical form and proven by employing a linear regression equation. The measurement results of light intensity are displayed on a 16x2 LCD. The test results of the design tool against the reference tool shown that the level of accuracy of the design tool is relatively high.