cover
Contact Name
-
Contact Email
-
Phone
-
Journal Mail Official
-
Editorial Address
-
Location
Kota bandar lampung,
Lampung
INDONESIA
Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering)
Published by Universitas Lampung
ISSN : 2302 559X     EISSN : 2549 0818     DOI : -
Jurnal Teknik Pertanian Lampung or Journal of Agricultural Engineering (JTEP-L) is a peer-reviewed open-access journal. The journal invites scientists and engineers throughout the world to exchange and disseminate theoretical and practice-oriented researches in the whole aspect of Agricultural Enginering including but not limited to Agricultural Mechanization, Irrigation, Soil and Water Engineering, Postharvest Technology, Renewable Energy, Farm Structure, and related fields. The first issue was published in October 2012 by Department of Agricultural Engineering, Faculty of Agriculture, University of Lampung. Jurnal Teknik Pertanian Lampung has ISSN number 2302 - 559X for print edition on October 10, 2012 then 2549 - 0818 for online edition on January 10, 2017. Jurnal Teknik Pertanian Lampung is issued periodically four times a year in March, June, September, and December. Jurnal Teknik Pertanian Lampung has been indexed by Google Scholar, Crossref, Directory Open Access Journals (DOAJ), and CABI. Since Volume 5 Issue 1 (2016) Jurnal Teknik Pertanian Lampung has been accredited as SINTA 3 by Directorate General of Higher Education (DIKTI). Starting Volume 10 Issue 3 (2021) the journal received accreditation SINTA 2.
Arjuna Subject : -
Articles 1,077 Documents
Physical Treatments for Alleviating Chilling Injury in Fresh produce Putri Wulandari Zainal; Daimon Syukri; Irfan Suliansyah; Khandra Fahmy
Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering) Vol 13, No 2 (2024): June 2024
Publisher : The University of Lampung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.23960/jtep-l.v13i2.493-505

Abstract

Fresh produce has a short shelf-life because the metabolic activity continues after harvest. Low temperature is one of the postharvest technology methods that suppress this activity along storage. Its effects prolong the shelf-life of fruits and vegetables. This method has long been recommended to reduce deterioration during storage so that it can maintain the quality of fruits and vegetables. However, it still has drawbacks such as chilling injury, especially in tropical and subtropical origins that are chilling sensitive. Therefore, another storage method is needed to alleviate chilling injury such as low-temperature conditioning, high-temperature conditioning, and intermittent warming which only use environmental conditioning during storage. The other one has modified atmosphere packaging and controlled atmosphere packaging. They utilize the ideal atmosphere for each fresh product during storage. The treatment proved that it could alleviate chilling injuries such as reduced pitting, flesh injury, failure of mature, scald, peel browning, weight losses, electrolyte leakage, malondialdehyde, respiration rates, production of superoxide radical anion (O₂-) & hydrogen peroxide (H₂O₂), lipoxygenase activity, phospholipase D, phenylalanine ammonia-lyase (PAL), and polyphenol oxidase (PPO). Keywords: Chilling injury, Fresh produce, Intermittent warming, Low temperature, Physical treatment.
Analysis of Air Distribution in a Double Tube Model Heat Exchanger System using Computational Fluid Dynamic (CFD) Reniana Reniana; Darma Darma; Paulus Payung
Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering) Vol 13, No 3 (2024): September 2024
Publisher : The University of Lampung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.23960/jtep-l.v13i3.763-771

Abstract

The double-tube model heat exchanger has a construction of three tube cylinders arranged into one. This model of heat exchanger has a fairly simple construction, making it easier to manufacture and speeding up the manufacturing process. Computational Fluid Dynamics (CFD) is software that can be used to optimize the design and performance evaluation process as well as to speed up the process and minimize costs in tool development because it can represent phenomena that occur in a system. This research aims to analyze air distribution in a double tube model heat exchanger system using CFD analysis and to validate the analysis results with experiments. Based on the research results, a double tube model heat exchanger has been created with an average performance of output temperature and air velocity reaching 97.8oC and 10.4 m/s at a coconut shell fuel consumption of 0.24 kg/minute. The results of evaluating experimental data with simulations obtained RMSE values between 59.33 – 71.69, and MAPE values between 26.26 – 32.93. Meanwhile, the results of the Paired Sample T-Test show that there is no real difference between experimental data and simulation data with an R-value of 0.875 – 0.964. CFD analysis in this research can be used as a reference in the optimization process and development of heat exchangers, especially double-tube models. Keywords: CFD, Design, Double-Tube. Heat Exchanger, Simulation,
Strategy to Develop Okra (Abelmoschus esculentus L.) Plantation Based on Land Suitability Class and SWOT analysis Idah Andriyani; Sri Wahyuningsih; Soni Sisbudi Harsono; Dwi Agustina
Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering) Vol 13, No 3 (2024): September 2024
Publisher : The University of Lampung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.23960/jtep-l.v13i3.782-793

Abstract

Okra is famous as super food sources that prevent diabetes and reduce cholesterol. To meet the increasing demand for okra, it is necessary to develop plantation for okra cultivation. In this sense, land suitability analysis for okra plantation is needed as base information to develop the plantation development strategies. This study aimed to identify the okra plantation development strategies in Jember Regency. The strategies involved the technology recommendations needed to improve land conditions. Land suitability evaluation parameters were analyzed using ArcGIS software. The results of the analysis were used to determine internal and external factors in the SWOT (strengths, weaknesses, opportunities, and threats) analysis to determine the technology needed. Results showed that suitable area for okra plantation was divided into class S1 (highly suitable) of 56.85%, and class S2 (moderately suitable) 43.15% of the area. Moreover, based on SWOT analysis the proposed technology strategies for 7 sub districts were in the quadrant II, meaning had weaknesses. Increasing compost as fertilizer was recommended to increase N, K, and P in the soil as well as to increase soil solum. In addition, irrigation and drainage system was proposed to solve problems regarding rainfall. Recommendation to reduce sloping area included terracing development. Keywords: GIS, Land suitability analysis, Okra (Abelmoschus esculentus L.), Plantations development strategies, SWOT.
Precafe December 2023 Agus Haryanto
Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering) Vol 12, No 4 (2023): December 2023
Publisher : The University of Lampung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.23960/jtep-l.v12i4.%p

Abstract

Influence of Soaking Temperature and Concentration of Sugar Solution in the Process of Osmotic Dehydration of Curcuma (Curcuma xanthorrhiza Roxb.) Sutarsi Sutarsi; Gadis Dien Syahda Vi; Ning Puji Lestari; Iwan Taruna; Dian Purbasari
Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering) Vol 13, No 3 (2024): September 2024
Publisher : The University of Lampung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.23960/jtep-l.v13i3.711-719

Abstract

Curcuma (Curcuma xanthorrhiza Roxb.) is a type of medicinal plant native to Indonesia that has a moisture content of around 80-90% when harvested. Osmotic dehydration is a technique for reducing water content that can be used to overcome this problem by immersing the material in a high concentration solution. The purpose of this study was to analyze the effect of temperature and concentration of sugar solution on final water content, weight reduction, solid gain, water loss, and analyze the temperature and concentration optimal for the observed variables in curcuma dehydration process. The method used in this study was to use a completely randomized design (CRD) which was arranged in a factorial manner with 2 factors namely sugar content 50°Brix, 60°Brix, 70°Brix and immersion temperature 30°C, 40°C, 50°C with 3 repetitions. The results of the curcuma osmotic dehydration process which produces the most optimal treatment combination is at an immersion temperature of 50°C and a solution concentration of 70°Brix. This treatment combination resulted in a water content of 63.44% wb, a weight reduction of 34.73%, a solid gain of 11.81%, a water loss of 46.54%, and a total color difference of 69.64. Keywords: Curcuma, Osmotic dehydration, Sugar concentration, Temperature.
Effect of Paclobutrazol Concentration and Urea Fertilizer Dosage on Plant Growth and Yield Long Beans (Vigna sinensis L.) Djarwatiningsih Djarwatiningsih; Agus Sulistyono; Novita Dyah Safitri
Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering) Vol 13, No 3 (2024): September 2024
Publisher : The University of Lampung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.23960/jtep-l.v13i3.650-661

Abstract

Long bean is a well-known horticultural commodity in people's lives with quite high nutritional value. This study aims to determine the effect of paclobutrazol concentrations and doses of Urea fertilizer on the growth and yield of long bean plants. Long bean plants were planted on private cultivation land in Werungotok Village, Nganjuk District, Nganjuk Regency, East Java in January 2023 – April 2023. The study was structured using a Split Plot Design with 2 factors, including concentration of paclobutrazol and the dose of Urea fertilizer. Each factor consisted of 4 levels and was repeated 3 times. The results revealed that the concentration of paclobutrazol and the dose of urea fertilizer had an effect on plant length, number of leaves, age of flower emergence, number of flowers, number of fruits, fruit weight per plant, fruit weight per plot, fruit weight per hectare, fruit length and fruit set. The best results were obtained from the treatment with a concentration of 150 ppm paclobutrazol and a dose of 100 kg/ha of urea. Keywords:  Growth,  Paclobutrazol concentration,  Urea dose, Yield.   
Comparison of Several Methods for Analysis Slope Length Index Factor at A Watershed Scale Arif Faisol; Mashudi Mashudi; Samsul Bachri
Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering) Vol 13, No 3 (2024): September 2024
Publisher : The University of Lampung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.23960/jtep-l.v13i3.817-830

Abstract

Slope length and steepness factor index (LS) is one of the parameters for the Universal Soil Loss Equation (USLE) to estimate soil erosion. Currently, several methods for LS analysis, i.e. Wischmeier-Smith, Moore-Nieber, and Desmet – Govers. This study aims to compare the Wischmeier-Smith method, Moore–Nieber method, and Desmet–Govers method to analyze LS in the watershed in Manokwari – West Papua. This research consists of 4 main stages, i.e. data inventory, watershed boundary delineation, LS analysis, and LS comparison. The research showed that the Wischmeier-Smith method gave a higher LS value than the Moore – Nieber method and the Desmet – Govers method. Meanwhile, the Desmet – Gover method gives a lower average LS value than the Wischmeier-Smith method and the Moore – Nieber method. Based on the T-test, the LS produced by the Wischmeier-Smith, Moore-Nieber, and Desmet–Govers methods has significant differences in analyzing LS in the watershed in Manokwari – West Papua. Keywords: Desmet – Govers, Moore – Nieber, Universal Soil Loss Equation, Watershed, Wischmeier-Smith
Effect of Manure Dosage on the Growth and Yield of Bambara Beans through a Multilocation Test Reo Sambodo; Agus Setyoko; Ajat Sudrajat
Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering) Vol 13, No 3 (2024): September 2024
Publisher : The University of Lampung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.23960/jtep-l.v13i3.941-950

Abstract

The purpose of this study is to determine the suitability and productivity level of Bambara beans in the Special Region of Yogyakarta, especially to determine and examine the effect of the use of organic fertilizer from livestock manure on the growth and yield of Bambara beans. The implementation of the study involved a multi-location test of Bambara bean cultivation in three subdistricts, namely Tempel, Sedayu, and Cangkringan. In these three areas, manure was applied with 3 dose variations, namely 10 tons/Ha, 20 tons/ha and 30 tons/ha. The study was arranged in a Completely Randomized Design (CRD) where each treatment was carried out with 3 replication plots. The test results showed that the dose of manure was not significantly different from the production of Bambara beans. Therefore, a dose of manure of 10 tons/ha can be recommended to achieve higher economic benefits in Bambara bean cultivation. In addition, based on the evaluation of the growth phase and plant yield, the location of Bambara bean planting in Tempel gave higher yields compared to Sedayu and Cangkringan. Bambara bean cultivation in Tempel can produce 686.45 g/plot. Keywords: Bambara beans, Growth, Multilocation test, Organic fertilizer, Yield.
Effect of Dosage and Frequency of Fertilization Application Potassium in Lowland Melon (Cucumis melo L.) Cultivation in Polybags Viona Rahmadhanti; Nurlianti Nurlianti; Sunarti Sunarti; Sri Rustianti; Asfaruddin Asfaruddin
Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering) Vol 13, No 3 (2024): September 2024
Publisher : The University of Lampung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.23960/jtep-l.v13i3.914-923

Abstract

Melon cultivation is usually cultivated in the highlands, but the development of melon cultivation in the lowlands has the potential to be developed. The problem is that ultisol with low fertility dominates the soil in the lowlands. Cultivating melons in polybags makes it possible to provide ideal nutrients for plant needs. The right frequency of fertilization can provide appropriate nutrients for each phase of plant growth. The study aimed to determine the best dose and frequency of potassium fertilizer application and the interaction between the two on the growth and yield of melon plants and the sweet taste of melons. The study used a randomized block design (RBD). Factor I: Potassium dose (D) 4 levels: control: 0 g per plant, D1: 30, D2: 40, D3: 50. The second factor is the frequency of application of Potassium (F) consisting of 3 levels, namely: F1: 4 times, F2: 6, and F3: 8. The results of the study showed that the frequency of application of potassium fertilizer had a significant effect on the flowering age of melon plants. A potassium fertilizer dose of 50 g per plant (D3) gave the best fruit weight and diameter and a higher sweetness than other treatments. Keywords: Lowland, Fertilization frequency, Polybag cultivation, Potassium dosage.
Performance Comparison of Two Portable Near-infrared Devices for Rapid Authentication of Aceh Aromatic Rice ‘Sigupai’ Slamet Widodo; Masyitah Masyitah; Yohanes Aris Purwanto; Akeme Cyril Njume
Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering) Vol 13, No 3 (2024): September 2024
Publisher : The University of Lampung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.23960/jtep-l.v13i3.851-862

Abstract

Sigupai rice, Indonesia local aromatic rice varieties grown in South-West region of Aceh, is highly valued for its fragrance and quality, making it susceptible to adulteration. This study compares the performance of two portable Near-infrared (NIR) devices, SCiO and NeoSpectra, for rapid authentication of Sigupai rice. We evaluated 86 samples for qualitative analysis (i.e. authentic vs adulterated rice) and 44 samples for quantitative analysis (i.e. the level of adulteration). For the qualitative analysis using partial least squares-discriminant analysis (PLS-DA), the best estimation model could differentiate authentic and adulterated samples with an accuracy, sensitivity, specificity, and false positive rates of 89.29%, 92.86%, 85.71% and 14.29% for the NeoSpectra and 97.44%, 100%, 94.87%, and 5.13% for the SCiO, respectively at the validation stage. For quantitative analysis using partial least squares-regression (PLS-R), the best estimation model could estimate the level of adulteration with a coefficient of determination (R²), RMSEP, RPD, and consistency values of 0.92, 1.50%, 5.93 and 100.69% for the NeoSpectra and 0.96, 1.31%, 6.83 and 104.78% for the SCiO. Both portable NIR devices could be used as a rapid analysis tool for the authenticity of Sigupai rice with high accuracy. However, in this study the SCiO device showed a better performance. Keywords: Portable NIR device, Authentication, Aromatic rice, Rapid analysis, Sigupai variety.

Page 54 of 108 | Total Record : 1077


Filter by Year

2012 2025


Filter By Issues
All Issue Vol. 14 No. 6 (2025): December 2025 Vol. 14 No. 5 (2025): October 2025 Vol. 14 No. 4 (2025): August 2025 Vol 14, No 3 (2025): June 2025 Vol. 14 No. 3 (2025): June 2025 Vol 14, No 2 (2025): April 2025 Vol. 14 No. 2 (2025): April 2025 Vol. 14 No. 1 (2025): February 2025 Vol 14, No 1 (2025): February 2025 Vol. 13 No. 4 (2024): December 2024 Vol 13, No 4 (2024): December 2024 Vol 13, No 3 (2024): September 2024 Vol. 13 No. 3 (2024): September 2024 Vol 13, No 2 (2024): June 2024 Vol. 13 No. 2 (2024): June 2024 Vol 13, No 1 (2024): March 2024 Vol. 13 No. 1 (2024): March 2024 Vol. 12 No. 4 (2023): December 2023 Vol 12, No 4 (2023): December 2023 Vol. 12 No. 3 (2023): September 2023 Vol 12, No 3 (2023): September 2023 Vol 12, No 2 (2023): June 2023 Vol. 12 No. 2 (2023): June 2023 Vol. 12 No. 1 (2023): March 2023 Vol 12, No 1 (2023): March 2023 Vol. 11 No. 4 (2022): Desember 2022 Vol 11, No 4 (2022): Desember 2022 Vol. 11 No. 3 (2022): September 2022 Vol 11, No 3 (2022): September 2022 Vol 11, No 2 (2022): June Vol. 11 No. 2 (2022): June Vol 11, No 1 (2022): March Vol. 11 No. 1 (2022): March Vol 10, No 4 (2021): Desember Vol. 10 No. 4 (2021): Desember Vol. 10 No. 3 (2021): September Vol 10, No 3 (2021): September Vol 10, No 2 (2021): Juni Vol. 10 No. 2 (2021): Juni Vol. 10 No. 1 (2021): Maret Vol 10, No 1 (2021): Maret Vol 9, No 4 (2020): Desember 2020 Vol. 9 No. 4 (2020): Desember 2020 Vol 9, No 3 (2020): September 2020 Vol. 9 No. 3 (2020): September 2020 Vol. 9 No. 2 (2020): Juni 2020 Vol 9, No 2 (2020): Juni 2020 Vol 9, No 1 (2020): Maret 2020 Vol. 9 No. 1 (2020): Maret 2020 Vol 8, No 4 (2019): Desember Vol 8, No 3 (2019): September Vol 8, No 2 (2019): Juni Vol 8, No 1 (2019): MARET Vol 7, No 3 (2018): Desember Vol 7, No 2 (2018): Agustus Vol 7, No 1 (2018): April Vol 6, No 3 (2017) Vol 6, No 2 (2017) Vol 6, No 1 (2017) Vol 5, No 3 (2016) Vol 5, No 2 (2016) Vol 5, No 1 (2016) Vol 4, No 4 (2015): Special Edition Vol 4, No 3 (2015) Vol 4, No 3 (2015) Vol 4, No 2 (2015) Vol 4, No 1 (2015) Vol 4, No 1 (2015) Vol 3, No 3 (2014) Vol 3, No 3 (2014) Vol 3, No 2 (2014) Vol 3, No 2 (2014) Vol 3, No 1 (2014) Vol 2, No 3 (2013) Vol 2, No 2 (2013) Vol 2, No 2 (2013) Vol 2, No 1 (2013) Vol 1, No 1 (2012) More Issue