Claim Missing Document
Check
Articles

Found 30 Documents
Search

LOCAL HALAL COSMETIC PRODUCTS PURCHASE INTENTION: KNOWLEDGE, RELIGIOSITY, ATTITUDE, AND ISLAMIC ADVERTISING FACTORS Najib, Moh Farid; Kusdiana, Wawan; Razli, Izyanti Awang
Journal of Islamic Economic Laws Vol 5, No 2 July 2022
Publisher : Universitas Muhammadiyah Surakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.23917/jisel.v5i2.19199

Abstract

The demand for halal cosmetic products in various parts of the world has increased, especially in Muslim-majority countries like Indonesia. The potential demand for halal cosmetic products will continue to increase in the future. Indonesia has the opportunity to become the world’s largest producer and consumer of halal cosmetic products. Therefore, Indonesia must be able to take advantage of these opportunities by maximizing its potential. This study aims to determine the effect of knowledge, religiosity, attitudes, and Islamic advertising factors on the purchase intention of local halal cosmetic products. In addition, it also aims to find out the reasons for the purchase intention of Muslim consumers towards local halal cosmetic products and to determine the purchase intentions of Muslim consumers towards imported cosmetic products in the future. This study used 400 respondents who are Muslim and domiciled in West Java. Then to test the model and hypothesis using Smart PLS Software. The results of this study indicate that all hypotheses are accepted. Knowledge and religiosity have a positive and significant influence on attitudes and purchase intentions. Then attitude and Islamic advertising have a positive and significant influence on the purchase intention of local halal cosmetic products. Thus, in building the intention to buy local halal cosmetic products, the company must know and understand what factors underlie consumers’ intentions to buy local halal cosmetic products.
Design Unmanned Minesweeper Catamaran as a Tool to Make a Safer Marine Environmental Using Analytical Methods Kusuma, Cahya; Mulyono, Radityo Dimas; Kusdiana, Wawan; Syaifi, Muhammad; indiaryanto, Mahendra
International Journal of Offshore and Coastal Engineering (IJOCE) Vol 7, No 1 (2023)
Publisher : Pusat Publikasi Ilmiah Institut Teknologi Sepuluh Nopember

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12962/j25800914.v7i1.15527

Abstract

After the war is over, the sea mine layer must be neutralized because if the mine explodes, it will cause environmental damage and the death of marine life. Minefields with very shallow water are difficult to clear using a minehunter. Mining in shallow sediment-covered areas is still hazardous, especially if the area is bridges, shore dredging, ports, or shipping lanes. This study designed the hull of the Unmanned Mines Sweeper (UMS) Catamaran, which towing side scan sonar so that it could double function as a mine-like detection and a survey vessel for seabed environmental conditions in very shallow areas. UMS design with analysis method using Maxsurf Modeler Advanced V21.13 software. Line plan design and general settings using AutoCAD software with data obtained from models designed using Maxsurf software. Total resistance value using Maxsurf Resistance Advanced V21.13 software. UMS uses a Catamaran design with an LoA of 4.823 meters, LwL of 4.177 m, and a width of 2.24 m. The ship has a high draft of 0.498 with a displacement of 1.557 tons. The results of the resistance analysis obtained Rt of 404.94 N. The drive system uses an electric motor that can provide endurance for 6 hours.
Design Stealth Fast Attack Vehicle (SFAV) 18 Meters Using Numerical Method as Coastal Patrol Vessels Kusuma, Cahya; Kusdiana, Wawan; Syaifi, Muhammad; Sumarsono, Wika Adhietama
International Journal of Offshore and Coastal Engineering (IJOCE) Vol 7, No 1 (2023)
Publisher : Pusat Publikasi Ilmiah Institut Teknologi Sepuluh Nopember

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12962/j25800914.v7i1.15525

Abstract

The design of the 18 Meter Stealth Fast Attack Vehicle (SFAV) with Maxsurf software and the Savitsky method as a coastal patrol vessel is a fast ship that has stealth capabilities that can be used as a coastal patrol vessel area 12 NM to supervise fishing vessels so that fishing and marine resources do not damage the environment such as the use of tiger trawls and marine bombs. The ship model resistance and stability are analyzed using the numerical software Maxsurf Modeller Advanced V8i. Lines plan and general arrangement using AutoCAD software. Model analysis, the design of the SFAV Interceptor Vehicle uses the spiral design method, while the prediction of the resistance value uses the Savitsky preplanning and planning methods. Ship stability uses standardized values issued by IMO, which can be applied to the Maxsurf Stability Advanced V8i software. The analysis results of resistance prediction software and numerical successively 43.416 kN, 45.526 kN, with a difference of 4.6%. The stability analysis is predicted using heel angle model analysis on Maxsurf stability software in various conditions. The results meet IMO standards and capable of sea stage 4. The existence of SFAV ships will help security patrols to protect the coastal area.
Development of Fire and Temperature Monitoring Interface in The Engine Room Using Visual Basic Programming Cahya Kusuma; Wawan Kusdiana; Muhammad Syaifi; Aris Tri Ika; Mahendra Indiaryanto
International Journal of Marine Engineering Innovation and Research Vol. 10 No. 3 (2025)
Publisher : Department of Marine Engineering, Institut Teknologi Sepuluh Nopember

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12962/j25481479.v10i3

Abstract

The design of the Temperature and Fire Monitoring Interface using Visual Basic Programming aims to detect fires at any time on the ship, especially in the main engine and diesel generator rooms. If the ship's initial conditions in the Main Engine room and diesel generator room are created to cause a fire, the tool will send a fire hazard signal which can be directly monitored by the ship's crew so that prevention can be carried out as early as possible. This design uses two smoke sensors and temperature sensors as inputs, one Arduino Uno microcontroller as a controller, one PC / Laptop as an interface for monitoring temperature and smoke conditions. The result of this system is that if the input temperature sensor and smoke sensor do not detect a fire hazard, the interface output displays a green color. If the temperature and smoke sensor input detects a fire hazard, the interface output will print red, and the buzzer output will light up as set by a visual basic program.
Development A Fire Extinguisher Nozzle Drive Mechanism with Android Monitoring and Control Cahya Kusuma; Vega Indra Citra Utama; Wawan Kusdiana; Aris Tri Ika R
International Journal of Marine Engineering Innovation and Research Vol. 10 No. 3 (2025)
Publisher : Department of Marine Engineering, Institut Teknologi Sepuluh Nopember

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12962/j25481479.v10i3

Abstract

The warehouses on land are rooms that are prone to fire hazards. The Spare Parts warehouse contains engine spare parts, rubber lifeboats, ship paint, thinner, maritime equipment, lubricating oil, dry food, and other logistics support. These materials have a high level of vulnerability to fire hazards. Thus, the danger of fire is one of the potential threats that can occur in Dismatbek. A fire protection system is needed that can minimize losses due to fire. This research is intended to develop a design for a fire extinguisher nozzle drive mechanism with Android monitoring and control. By building a mechanical movement mechanism for the nozzle in the vertical and horizontal directions so that the focus can be directed to the fire source with the Esp 32 Microcontroller. There is a monitoring and control unit via an Android smartphone which is equipped with three sensors, namely fire, temperature, and smoke sensors which are connected to an Arduino microcontroller to identify fire hazards. From the overall test results, it was found that the nozzle was successful in moving vertically and horizontally with a good mechanism for driving the fire nozzle arm in transmitting the power distributed to the nozzle arm resulting in a gear ratio of 2.06: 1 with a final rotational speed of 3.8 rpm at In the elevation direction, the torque is 1,606 Nm and in the azimuth direction, the speed is 7.28 rpm, the final torque is 3,028 Nm. The fire nozzle monitoring and control unit is capable of detecting potential fire hazards and the nozzle can be controlled with an Android smartphone and can extinguish fires by spraying water at the source of the fire well.
Hull Design Optimization and Ship Resistance Reduction: The Mediating Role of Hydrodynamic Performance and the Moderating Effect of Ship Speed ​​Variation Wawan Kusdiana; Ardiansyah; Cahya Kusuma; Anton Nugroho; Jajang Amir Hidayat
Information Technology Education Journal Vol. 5, No. 2, May (2026)
Publisher : Jurusan Teknik Informatika dan Komputer

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.59562/intec.v5i2.273

Abstract

Purpose –This study investigates the relationships among Hull Design Optimization (HDO), Hydrodynamic Performance (HP), Ship Resistance Reduction (SRR), and Ship Speed Variation (SSV) within an integrated mediation–moderation framework. Specifically, the study examines the direct effects of hull design optimization on hydrodynamic performance and ship resistance reduction, the mediating role of hydrodynamic performance, and the moderating effect of ship speed variation. Design/methods/approach – A quantitative explanatory research design was employed using a survey of 180 maritime professionals, including naval architects, shipyard engineers, hydrodynamic researchers, ship surveyors, consultants, lecturers, and graduate students. Data were collected through a structured questionnaire and analyzed using Structural Equation Modeling–Partial Least Squares (SEM-PLS). Findings – The results indicate that Hull Design Optimization has a significant positive effect on Hydrodynamic Performance (β = 0.910, p < 0.001) and Ship Resistance Reduction (β = 0.445, p < 0.001). Hydrodynamic Performance significantly influences Ship Resistance Reduction (β = 0.347, p = 0.001) and partially mediates the relationship between Hull Design Optimization and Ship Resistance Reduction (β = 0.316, p = 0.001). Furthermore, Ship Speed Variation significantly moderates the relationship between Hydrodynamic Performance and Ship Resistance Reduction (β = 0.135, p < 0.001). The structural model demonstrates substantial explanatory and predictive power. Research implications/limitations – The findings emphasize the importance of integrating hydrodynamic considerations and operational speed conditions into ship design optimization strategies. However, the study relies on expert perceptions and a cross-sectional survey design, which may limit the generalizability of the findings to actual vessel operations. Originality/value – This study contributes to the maritime engineering literature by integrating mediation and moderation mechanisms within a single SEM-PLS framework, providing a more comprehensive explanation of how hull optimization influences ship resistance reduction through hydrodynamic performance under varying operational speed conditions.
Design Stealth Fast Attack Vehicle (SFAV) 18 Meters Using Numerical Method as Coastal Patrol Vessels Cahya Kusuma; Wawan Kusdiana; Muhammad Syaifi; Wika Adhietama Sumarsono
International Journal of Offshore and Coastal Engineering Vol. 7 No. 1 (2023)
Publisher : Department of Ocean Engineering

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12962/j25800914.v7i1.15525

Abstract

The design of the 18 Meter Stealth Fast Attack Vehicle (SFAV) with Maxsurf software and the Savitsky method as a coastal patrol vessel is a fast ship that has stealth capabilities that can be used as a coastal patrol vessel area 12 NM to supervise fishing vessels so that fishing and marine resources do not damage the environment such as the use of tiger trawls and marine bombs. The ship model resistance and stability are analyzed using the numerical software Maxsurf Modeller Advanced V8i. Lines plan and general arrangement using AutoCAD software. Model analysis, the design of the SFAV Interceptor Vehicle uses the spiral design method, while the prediction of the resistance value uses the Savitsky preplanning and planning methods. Ship stability uses standardized values issued by IMO, which can be applied to the Maxsurf Stability Advanced V8i software. The analysis results of resistance prediction software and numerical successively 43.416 kN, 45.526 kN, with a difference of 4.6%. The stability analysis is predicted using heel angle model analysis on Maxsurf stability software in various conditions. The results meet IMO standards and capable of sea stage 4. The existence of SFAV ships will help security patrols to protect the coastal area.
Design Unmanned Minesweeper Catamaran as a Tool to Make a Safer Marine Environmental Using Analytical Methods Cahya Kusuma; Radityo Dimas Mulyono; Wawan Kusdiana; Muhammad Syaifi; Mahendra Indiaryanto
International Journal of Offshore and Coastal Engineering Vol. 7 No. 1 (2023)
Publisher : Department of Ocean Engineering

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12962/j25800914.v7i1.15527

Abstract

After the war is over, the sea mine layer must be neutralized because if the mine explodes, it will cause environmental damage and the death of marine life. Minefields with very shallow water are difficult to clear using a minehunter. Mining in shallow sediment-covered areas is still hazardous, especially if the area is bridges, shore dredging, ports, or shipping lanes. This study designed the hull of the Unmanned Mines Sweeper (UMS) Catamaran, which towing side scan sonar so that it could double function as a mine-like detection and a survey vessel for seabed environmental conditions in very shallow areas. UMS design with analysis method using Maxsurf Modeler Advanced V21.13 software. Line plan design and general settings using AutoCAD software with data obtained from models designed using Maxsurf software. Total resistance value using Maxsurf Resistance Advanced V21.13 software. UMS uses a Catamaran design with an LoA of 4.823 meters, LwL of 4.177 m, and a width of 2.24 m. The ship has a high draft of 0.498 with a displacement of 1.557 tons. The results of the resistance analysis obtained Rt of 404.94 N. The drive system uses an electric motor that can provide endurance for 6 hours.
Energy Efficiency Analysis of 3D Printing Machines (Additive Manufacturing) in Supporting Local MSMEs: Poverty Alleviation Opportunities in the Digital Era Anton Nugroho; Wawan Kusdiana
Journal of Social Science Utilizing Technology Vol. 4 No. 1 (2026)
Publisher : Yayasan Adra Karima Hubbi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.70177/jssut.v4i1.3505

Abstract

Background. The rapid development of additive manufacturing, particularly 3D printing technology, has created new opportunities for small and medium enterprises (SMEs) to engage in flexible and low-volume production within the digital economy. Energy efficiency has become a critical factor influencing the operational feasibility of this technology, especially for SMEs that operate with limited financial resources and infrastructure. Understanding the energy performance of 3D printing machines is therefore essential for evaluating their potential role in supporting sustainable entrepreneurship and poverty alleviation. Purpose. This study aims to analyze the energy efficiency of 3D printing machines in additive manufacturing processes and examine their potential contribution to strengthening local SMEs and expanding economic opportunities in the digital era. Method. The research employs a quantitative experimental design combined with descriptive analysis. Energy consumption data were collected using digital power meters during standardized printing experiments involving several desktop 3D printers commonly used by SMEs. Statistical analysis was conducted to compare machine efficiency and evaluate the relationship between printing parameters and electricity consumption. Results. The findings indicate significant differences in energy consumption across machine types and printing configurations. Optimized parameter settings and efficient machine architecture reduce electricity usage and operational costs. Evidence from SME production contexts demonstrates that energy-efficient additive manufacturing supports faster prototyping and flexible small-scale production. Conclusion. Energy-efficient 3D printing technology represents a promising tool for strengthening SME productivity and fostering inclusive economic development in the digital era.
Strategic Enhancement of Technical and Non-Technical Competencies in Mechanical Engineering Vocational Education Edi Riesnandar; Feriandy Feriandy; Wawan Kusdiana; Imam Munajat Nuhartonosuro
Tafkir: Interdisciplinary Journal of Islamic Education Vol. 7 No. 4 (2026): Integrative Islamic Education
Publisher : Pascasarjana Universitas KH. Abdul Chalim

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31538/tijie.v7i4.2793

Abstract

This study discusses strategies to strengthen technical and non-technical competencies in the Mechanical Engineering vocational education program (STTAL) to develop superior Indonesian Navy human resources (TNI AL) that can adapt to the dynamics of modern maritime operations. This study used a qualitative approach and a literature review method, examining accredited scientific journals, international articles, official TNI AL documents, the Strategic Plan (Renstra), and STTAL performance reports. The results indicate a technical competency gap in using Industry 4.0 technologies (such as VR, IoT, and intelligent machinery systems), as well as weaknesses in non-technical competencies such as adaptive leadership, teamwork, and soldier resilience. Through thematic analysis, this study found that integrating a hybrid teaching factory, using simulation and virtual reality, strengthening a competency-based curriculum, and fostering industry-military collaboration are key strategies for closing this gap. Furthermore, an adaptive organizational culture and a sustainable quality management system at STTAL are essential prerequisites for ensuring the strategy's implementation supports the vision of superior and professional TNI AL human resources. This study offers a conceptual model of an integrated competency-strengthening strategy that can serve as a reference for developing policies and reforming military vocational education within the TNI AL.