Adian Rindang
Program Studi Keteknikan Pertanian Fakultas Pertanian Universitas Sumatera Utara

Published : 39 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 39 Documents
Search

Test of Some Kind of Biomass Fuels on Processed Waste Polymer Agriculture Tool Herdianze Novalina Pasaribu; Saipul Bahri Daulay; Adian Rindang
Jurnal Rekayasa Pangan dan Pertanian Vol 3, No 2 (2015): Jurnal Rekayasa Pangan dan Pertanian
Publisher : Universitas Sumatera Utara

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (160.639 KB)

Abstract

Indonesia has many sources of renewable energy. One of them is biomass. This research was carried out to try some fuel from biomass to be used in agricultural polymer waste equipment. Biomass which used in this research were candlenut shell, coconut shell, and wood. Parameters used were equipment effective capacity, the percentage of polypropylene plastic residue, the percentage of fuel residue, oil volume, melting point, and the melting time. The results were: equipment effective capacity for candlenut shell fuel, coconut shell fuel, and wood fuel were 0 ml/hour, 62,22 ml/hour, and 77,66 ml/hour respectively. The percentage of plastic residue generated for candlenut shell, coconut shell, and wood fuel were 53.33%, 22.67%, and 20% respectively. The percentage of residue fuel for candlenut shell fuel, coconut shell fuel, and wood fuel were 35.67%, 16.87%, and 16% respectively. The volume of oil produced for candlenut shell fuel, coconut shell fuel, and wood fuel were 0 ml, 93.33 ml, and 110 ml respectively. The melting point obtained from the burning of fuel wood and coconut shell was 250 0C and the candlenut shell fuel was 175 0C. Melting time resulted in fuel of candlenut shell, coconut shell, and wood were 3.1 hours, 1.5 hours, and 1.44 hours respectively. Keywords : Biomass fuel, Plastic waste, and Pyrolysis.
Knife Edge Test of Mechanical Desiccated Coconut Stephanus K.; Lukman Adlin Harahap; Adian Rindang
Jurnal Rekayasa Pangan dan Pertanian Vol 3, No 2 (2015): Jurnal Rekayasa Pangan dan Pertanian
Publisher : Universitas Sumatera Utara

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (147.336 KB)

Abstract

This research was done to test the effect of knife edge on the effective capacity of the equipment, percentage of material that was grated uncompletely, percentage of material left in the equipment, and yield. This research was using non factorial completely randomized design. It was found that the effective capacity of the equipment, percentage of material that was grated completely, percentage of material left in the equipment, and yield on two knifes edge/cm2 are 44,821, 5,87%, 11,69%, and 88,31% kg/hr respectively. On three knifes edge/cm2 are 46,049, 3,97%, 9,68%, and 90,32% kg/hr respectively. On four knifes edge/cm2 are 48,988, 3,79%, 6,74%, and 93,26% kg/hr respectively. The results showed that number of knife edge had significant effect on the percentage of material that was grated uncompletely, percentage of material left in the equipment, and yield and had no effect on the effective capacity. The main cost from year one to year seven were Rp. 35,29, Rp. 32,92, Rp. 32,13, Rp. 31,73, Rp. 31,49, Rp. 31,37, and Rp. 31,23 per kg respectively. Break even point from year one to year seven were 2897,76, 1558,97, 1113,32, 890,89, 757,71, 687,64, 606,13 kg respectively. The result of net present value from 6% of bank rate was Rp. 838.406.384,79 which means this business was competent. The internal rate of return was 35,56% which means this business was competent if the bank rate were not more than 35,56%. Keywords : Knife edge, grater, desiccated coconut
Design of Soybean Epidermis Peeler Siska Willyana; Achwil Putra Munir; Adian Rindang
Jurnal Rekayasa Pangan dan Pertanian Vol 3, No 3 (2015): Jurnal Rekayasa Pangan dan Pertanian
Publisher : Universitas Sumatera Utara

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (277.142 KB)

Abstract

Soybean peeling is aimed to simplify the processing of soybean in the next step, such as in tofu making, tempe making and soybean extract. The peeling techniques of soybean was used widely with simple way which is soaked in the water and stomp it in a basin until its skin peeled. This research was to design,  make, test and analyze the economic value of the soybean peeler. The parameters of this research were effective capacity, broken peeled soybean percentage, unpeeled soybean percentage, losses soybean percentage and economic analysis. The results showed the effective capacity was 55,5 kg/hour. Percentage of broken peeled soybean was 4,91%, percentage unpeeled soybean was 11,01% and percentage of losses soybean was 2,1%. Economic Analysis was Rp. 104,373/kg, BEP was 259,32 kg/year and IRR was 66,54%. Key words : epidermis, peeler, silinder type, soybean
Utilization of Palm Kernell Shells and Palm Oil Sludge as Raw Materials of Biobriquette Charcoal Muhammad Ginta Munthe; Achwil Putra Munir; Adian Rindang
Jurnal Rekayasa Pangan dan Pertanian Vol 3, No 4 (2015): Jurnal Rekayasa Pangan dan Pertanian
Publisher : Universitas Sumatera Utara

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (191.315 KB)

Abstract

Briquette is one type of alternative fuel made ​​from various kinds of biomass. Biomass used in this study was the palm kernel shells and palm oil sludge. This research was aimed to make biobriquette charcoal from palm kernel shells and palm oil waste sludge as an alternative fuel and to test the quality of biobriquette charcoal. Testing was performed under non factorial completely randomized design. The parameters observed were calorific value, water content, density and ash content. The results of this study indicated that the composition of biobriquette charcoal affected the calorific value, water content, density and ash content. The average of calorific value was 3714.16 cal/g, the average of water content was 7.95 %, the average of density was 0.79 (g / cm3) the average ash content was 19.84 (%). Keywords : Briquette , palm kernel shells ,sludge, waste
The Operation Performance Evaluation and Maintenance of Bandar Sidoras Irrigation System in Percut Sei Tuan District Deli Serdang Regency Ardelimas ARS; Sumono Sumono; Adian Rindang
Jurnal Rekayasa Pangan dan Pertanian Vol 4, No 1 (2016): Jurnal Rekayasa Pangan dan Pertanian
Publisher : Universitas Sumatera Utara

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (149.29 KB)

Abstract

Evaluation of the performance of irrigation system is one way to describe the circumstances and characteristics of an irrigation system. This study aims to evaluate the performance of operation and maintenance of Bandar Sidoras irrigation system. Some of the indicators used to determine the performance of the irrigation system were: functional performance and network infrastructure of irrigation, water sufficiency level, the level of accuracy of the provision of water, management of government institution, the availability of fund, human resources and farmer institutional performance. The results showed that the level of accuracy was very appropriate water supply, the management of government institution was very good, the farmer institution performance was very good each with the value of 4, functional performance and irrigation network infrastructure was well, the adequacy of water was sufficient, the availability of funding was adequate , and human resources were adequate each with the value of 3. in general, the performance of operation and maintenance of the Bandar Sidoras irrigation system categorized very well with a value of 3.36. Keywords: Evaluation of the performance, operation and maintenance, irrigation system, Bandar Sidoras
The Engineered Of Charcoal Briquette Cast Basic material From Tea Waste Muhammad Fajar Arfani; Lukman Adlin Harahap; Adian Rindang
Jurnal Rekayasa Pangan dan Pertanian Vol 4, No 1 (2016): Jurnal Rekayasa Pangan dan Pertanian
Publisher : Universitas Sumatera Utara

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (379.116 KB)

Abstract

agricultural waste. One of  utilization of the agricultural waste is tea waste that into briquettes as an alternative energy to replace fuel oil and gas, as well as a raw material for the manufacture of activated charcoal. That is why the author made a cast to simplify charcoal briquette printing making process. This study used literature study, cast making, instruments testing and parameters observation. Parameters measured were was capacity, moisture content, ash content, heating value, economic analysis, break even point, net present value, and internal rate of return. The results showed the capacity was 2,907kg tool / h, average water content was 2,6%, average ash content was 6,357%, average calorific value was 5740,70 cal / g, cost was Rp. 25.750,46 for the first year, Rp. 25.453,35 for the second year, Rp. 25.354,45 for the third year, Rp. 25.305,08 for the fourth year, and Rp. 25.275,53 for the fifth year, the break even point 952,89 kg /year for the first year, 513,71 kg /year for the second year, 367,52 kg / year for the third year, 367,52 kg / year for the fourth year and 250,86 kg / year for the fifth year, net present value of Rp. 1.135.273.634,79, internal rate of return was 12,74%, its mean that this equipment was worthy to used. keywords: printing tools, charcoal briquettes, tea waste.
Design and Construction of Soyabean Milk Maker Winanda Pardhanu; Saipul Bahri Daulay; Adian Rindang
Jurnal Rekayasa Pangan dan Pertanian Vol 4, No 1 (2016): Jurnal Rekayasa Pangan dan Pertanian
Publisher : Universitas Sumatera Utara

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (179.056 KB)

Abstract

The process in making soya bean to be soya milk is an interesting thing to know. This research was held to design, to construct, to test, and to analyze economic value of soya bean milk maker. The parameter observed were effective capacity, yield percentage, organoleptic’s test and economic analysis.Based on this research, it was summerized that the effective capacity of this equipment was 6,18 kg/hour. Yield percentage was 64,4%. Basic cost from first year to fifth year were Rp 2.082/kg, Rp 1.920/kg, Rp 1.866,4/kg, Rp 1.839,26 dan Rp 1.823,12/kg. Break even point was 350,85 kg/year. Net present value with 8% rate was Rp 127.554.735,4 and internal rate of return was 34,4%. Keywords: Soya bean, milk, effective capacity, yield percentage, economic analysis
The Study on Water Distribution in Inceptisol Soil Planted with Soybean at Different Amount of Given Water Juni Artina Alberta; Sumono Sumono; Adian Rindang
Jurnal Rekayasa Pangan dan Pertanian Vol 4, No 2 (2016): Jurnal Rekayasa Pangan dan Pertanian
Publisher : Universitas Sumatera Utara

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (300.505 KB)

Abstract

Knowing water distribution in soil is important as one of the reason for irrigation. This research was purposed to study water distribution in Inceptisol soil planted with soybean at 100%, 80%, 60% field capacity and its effect on soybean plant’s production. The parameters observed were the characteristic of the soil physics, field capacity, evapotranspiration, water distribution, dry weight of soybean plant and pods weight.The results showed that Inceptisol soil had sandy clay loam texture. The highest porosity was found at 6-10 cm depth i.e. 63,06%. The lowest porosity was found at 0-5cm depth i.e. 54,23%. Water field capacity was 47,7%(dry basis). Soybean plant evapotranspiration at middle growth phase was 1,97 mm/day and the last growth phase was 1,58 mm/day. The highest water level was found at 6-10 cm depth i.e. 20,58-32,49% (dry basis). The lowest water level was found at  0-5 cm depth i.e. 20,34-26,63% (dry basis). The dry weight of soybean plant at the middle growth phase at 100% field capacity was 16,51 g, at the last growth phase was 14,89 g and pods weight was 13,20 g. The dry weight of soybean plant at the middle growth phase at 80% field capacity was 14,23 g, at the last growth phase was 11,77g and pods weight was 10,78 g. The dry weight of soybean plant at the middle growth phase at 60% field capacity was 13,12 g, at the last growth phase was 10,97 g and pods weight was 8,76g. Keywords: Evapotranspiration, Field Capacity, Inceptisol Soil, Soybean Plant, Water Distribution
Manufacture of Particle Board Made from Durian Peel Riska Riska; Adian Rindang; Rudi Hartono
Jurnal Rekayasa Pangan dan Pertanian Vol 4, No 4 (2016): Jurnal Rekayasa Pangan dan Pertanian
Publisher : Universitas Sumatera Utara

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (188.944 KB)

Abstract

Durian is a tropical plant from southeast Asia. Durian peel is household waste which has high cellulose that can be used as raw material for particle board. This study aims to determine the effect of concentration of isocyanate adhesive to the physical and mechanical properties of particle board as well as to determine the optimal level of adhesive in the manufacture of particle board made from durian peel (Durio Zibethinus Murr.). The study was conducted from March until July 2015. The research was conducted at the Workshop and the Laboratory Technology of Forest Products department of Forestry Faculty of Agriculture, University of North Sumatra. UPT Agricultural Mechanization of Agriculture Department of North Sumatra. Parameters measured were density, moisture content, thickness swelling, DSA, Modulus Of Rupture and Modulus Of Elasticity of particle board. The results showed that the value of physical and mechanical properties of particle board from leather durian not comply with the JIS A 5908- 2003 standard, except for the density and moisture content as well as the development of thick adhesive 2 hours at levels of 5% and 7%. Adhesive optimal levels in this study were 5% gluten content. Keywords : Durian Peel, Adhesives Isocyanates, Particle Board
Design Construction of Patchouli Oil Direct Steam Octo Fandi Sinaga; Lukman Adlin Harahap; Adian Rindang
Jurnal Rekayasa Pangan dan Pertanian Vol 4, No 4 (2016): Jurnal Rekayasa Pangan dan Pertanian
Publisher : Universitas Sumatera Utara

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (147.288 KB)

Abstract

Distillation is one of the ways to take up patchouli oil that contained in the leaves, the example is leaf clovers. Leaf clovers has the high oil content with euganol that reaches of 85%. The postharvest processing’s purpose is to make the agricultural product have a higher economic value compared to the product without processed. The purpose of this research was to design, build, test and analyze the economic value of patchouli oil direct steam distillation type. The parameters observed were effective capacity and economic analysis. Based on this research, it were summarized that the effective capacity of the equipment was 13,33 ml/hour. Economic analysis, basic costs for the first to the fifth year was Rp. 1.054,77/ml, Rp. 880,48/ml, Rp. 822,67/ml, Rp. 793,82/ml and Rp. 776,55/ml. Break even point (BEP) for the first to the fifth year was 247,17 ml/year, 133,02 ml/year, 95,16 ml/year, 76,27 ml/year and 64,95 ml/year. Net present value (NPV) 6% was Rp. 12.060.105 whereas NPV 8% was Rp. 10.793.704,29 and Internal rate of return this equipment was 27,04%. Keywords : leaf clovers, distillation, machine