Claim Missing Document
Check
Articles

Found 27 Documents
Search

Kebijakan Reforma Agraria Pasca Lahirnya Bank Tanah Indri Asra Ismanto; Pujiyono; Hari Purwadi
Prosiding Seminar Hukum Aktual Fakultas Hukum Universitas Islam Indonesia Vol. 1 No. 3 SEPTEMBER 2023
Publisher : Fakultas Hukum Universitas Islam Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

In Indonesia, Landeform is a problem that cannot be resolved well. The existence of the Government Regulation of Indonesia Number 64 of 2021 concerning the Land Bank which contains content of Landreform in it. This research will analyze the policies and linkages of Landreform after the existence of the Land Bank. This research uses normative juridical research methods, with a statute approach and library research data collection techniques. This research indicate that the goal of Landreform achievment are to decrease inequality in land ownership in order to create justice and create people's welfare through proportional control of land ownershiop, while the goal of the Land Bank refers to procurement of land for the economy and investment which focuses on country growth and country profits, even though one of the land bank’s purpose is for Landreform, the purpose of Land Bank are too many and non-specific covering public and private interests, so a balance is needed in the implementation of the Landreform.
Implikasi Dissenting Opinion Hakim Mahkamah Konstitusi dalam Perkara Perselisihan Hasil Pemilihan Umum (PHPU) Presiden dan Wakil Presiden Tahun 2024 M. Giovani Fernanda; Lego Karjoko; Hari Purwadi
Prosiding Seminar Hukum Aktual Fakultas Hukum Universitas Islam Indonesia Vol. 2 No. 5 SEPTEMBER 2024
Publisher : Fakultas Hukum Universitas Islam Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

The 2024 Presidential and Vice Presidential PHPU case contained a dissenting opinion, which had never happened before. This research aims to analyze the dissenting opinions of Constitutional Court Judges in the PHPU dispute for the President and Vice President and the implications of the dissenting opinion for the upcoming election. The research method is normative juridical. The type of data used is secondary data. The data analysis technique uses a data interpretation method with deductive reasoning which is presented descriptively. The results of this research are: first, the Dissenting opinion of the Constitutional Court Judge in the 2024 Presidential and Vice Presidential PHPU case, namely: Constitutional Justice Saldi Isra assessed that the distribution of social assistance during elections has the potential to cause a conflict of interest, so that the Petitioner's petition relating to social assistance is legally grounded; Constitutional Justice Arief Hidayat, based on systematic and grammatical interpretation, is of the opinion that the President/Vice President's right to campaign is used when the President/Vice President pair becomes the President/Vice President candidate pair in an election contest; Constitutional Justice Enny Nurbaningsih believes that there has been non-neutrality of officials in several regions, so the Court should order re-voting for several of these regions. Second, the implications of dissenting opinions on the upcoming election can be used as a basis for the implementation of future elections, so that there are improvements both in terms of regulations, institutions and implementation that must be carried out by legislators and election organizers in order to increase the integrity and credibility of elections.
Implementasi Pembebasan Biaya Jasa Notaris bagi Masyarakat Tidak Mampu di Kabupaten Boyolali Agung Nugroho; Hari Purwadi; Erna Dyah Kusumawati
Jurnal Hukum Lex Generalis Vol 6 No 12 (2025): Tema Hukum dan Hak Asasi Manusia
Publisher : CV Rewang Rencang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56370/jhlg.v6i12.2255

Abstract

The notary’s obligation to provide free services for underprivileged citizens is a normative mandate of the Notary Office Law, emphasizing the notary’s social function as a public official and promoting access to justice for vulnerable groups. This study examines the implementation of pro bono notary services in Boyolali Regency using an empirical juridical approach that combines normative legal analysis with field interviews. Findings show that most notaries understand this obligation, yet verification mechanisms for determining low-income status vary. Such inconsistencies risk inequality. The Regional Supervisory Council must strengthen oversight through standardized procedures, institutional support, and accountability improvements to ensure consistent pro bono service delivery.
Design and Development of an ESP8266-Based Digital Thermometer Using a DHT22 Sensor with OLED Display Output Janeta Wahyu Hidayah; Hari Purwadi; Ansar Rizal
Journal of Engineering, Electrical and Informatics Vol. 6 No. 1 (2026): Februari: Journal of Engineering, Electrical and Informatics
Publisher : Lembaga Pengembangan Kinerja Dosen

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55606/jeei.v6i1.6661

Abstract

The advancement of microcontroller technology enables the development of accurate and practical temperature measurement devices. This study aims to design and build a digital thermometer based on ESP8266 using a DHT22 sensor to measure air temperature and humidity in real time, with the measurement results displayed on an OLED screen. The research methodology includes circuit design, microcontroller programming, sensor calibration, and system testing by comparing the measurement results with reference instruments. The test results indicate that the system operates stably and responsively. The average temperature measurement deviation compared to the reference thermometer is 6.26 °C , while the average humidity measurement deviation compared to the digital hygrometer is 4.56 %RH . These results indicate that the DHT22 sensor provides acceptable accuracy and remains within tolerable limits for environmental monitoring applications
Arduino-Based Automatic Door Opener Design Using Ultra-sonic Sensors Desriani Martha Noelita Pakpahan; Hari Purwadi; Agusma Wajiansyah
Journal of Engineering, Electrical and Informatics Vol. 6 No. 1 (2026): Februari: Journal of Engineering, Electrical and Informatics
Publisher : Lembaga Pengembangan Kinerja Dosen

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55606/jeei.v6i1.6663

Abstract

The development of microcontroller technology has made it easier to design simple, economical, and easily applied automatic systems in everyday life. One application of this technology is an automatic door opener system. This study aims to design and test an Arduino-based automatic door opener system using an HC-SR04 ultrasonic sensor as an object detector. A cardboard house is used as a prototype to simplify the system design and testing process. The designed system uses an Arduino Uno as the main controller, an HC-SR04 ultrasonic sensor as a distance detector, and a servo motor as an actuator to open and close the door. The ultrasonic sensor detects the distance of the object in front of the door, then the Arduino processes the distance data to determine whether the door will open or close automatically. Tests were conducted with several variations in object distance to determine the level of sensor accuracy and system response. The test results show that the system is able to work well at a detection distance of less than or equal to 15 cm with an average response time of around 0.8 – 1.0 seconds. The door can open automatically when the object is within a predetermined distance and closes again after the object moves away. Based on these results, the designed automatic door opening system can function according to the research objectives and is suitable for application in a door automation system prototype.
An Internet of Things (IoT)-Based Room Temperature and Humidity Monitoring System Using ESP8266 and DHT22 Sensors Syelviana Meisyaroh; Hari Purwadi; Ansar Rizal
Journal of Engineering, Electrical and Informatics Vol. 6 No. 1 (2026): Februari: Journal of Engineering, Electrical and Informatics
Publisher : Lembaga Pengembangan Kinerja Dosen

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55606/jeei.v6i1.6670

Abstract

Monitoring room temperature and humidity is an important aspect to maintain comfort and environmental quality in the room. This research was conducted with the aim of implementing an Internet of Things ( IoT )-based room temperature and humidity monitoring system using an ESP8266 microcontroller and a DHT22 sensor. The system was designed to be able to read temperature and humidity data in real-time, then send it to the ThingSpeak platform via the internet network. The research method includes hardware design, software development, and system performance testing in closed room conditions. Testing was carried out by collecting data at several observation times to see the stability of sensor readings and the data transmission process. The test results showed that the system could run well and stably, with an average temperature of 30.9 °C and an average humidity of 81.9%, and the data was successfully displayed in real-time on the ThingSpeak dashboard without significant data loss. Based on these results, the developed system can be used as a simple and applicable IoT -based room temperature and humidity monitoring solution.
Monitoring Soil Moisture in Chili Plants on a Household Scale Based on the Internet of Things (IoT) Using NodeMCU ESP2866 and Soil Moisture Tiara Elmanda; Ansar Rizal; Hari Purwadi
Journal of Engineering, Electrical and Informatics Vol. 6 No. 1 (2026): Februari: Journal of Engineering, Electrical and Informatics
Publisher : Lembaga Pengembangan Kinerja Dosen

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55606/jeei.v6i1.6678

Abstract

This study designs and implements a soil moisture monitoring system for household-scale chili plants based on the Internet of Things (IoT) using NodeMCU ESP8266 and soil moisture sensors . The system was developed to assist users in monitoring soil moisture conditions accurately to support more efficient chili plant care. The soil moisture sensor is used to detect soil moisture levels, then the data is processed by NodeMCU ESP8266 and sent via a Wi-Fi network to the IoT platform so that it can be monitored in real-time . System testing was carried out on chili plants planted in pots by observing the sensor reading response in various soil conditions. The test results showed that the system was able to monitor changes in soil moisture stably and display information with a good response. The implementation of this system on a household scale is considered effective in assisting plant watering decisions and reducing the risk of water shortages or excesses. The designed system has the potential to be further developed by adding automatic control features and cloud- based data storage to support the implementation of sustainable smart agriculture.