Claim Missing Document
Check
Articles

Found 2 Documents
Search
Journal : Makara Journal of Technology

The Effect of Size and Crumb Rubber Composition as a Filler with Compatibilizer Pp-G-Ma in Polypropylene Blends and Sir-20 Compound on Mechanical and Thermal Properties Frida, Erna
Makara Journal of Technology Vol. 16, No. 2
Publisher : UI Scholars Hub

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Having been researched the development of thermoplastic elastomer material of polypropylene and natural rubber SIR- 20 compound with Crumb Rubber as the filler. Reinforced polypropylene with size 60 mesh with 1 mm, and the composition of the Crumb rubber (30, 40, and 50) wt%. Observed mechanical properties are tensile strength, fracture elongation, Young's modulus, tear strength and impact strength. Thermal properties are analyzed by DSC and DTA/TGA. It is acquired that for the size of 60 mesh crumb rubber tensile strength, fracture elongation, Young’s modulus, tear strength and impact strength are bigger than 1mm size. The addition of 60 mesh crumb rubber increases but it decreases by adding of 50 weight%. While for crumb rubber 1 mm tensile strength, fracture elongation, tear strength and impact strength decreas. Based on analysis of DSC that the addition of crumb rubber does not make a difference boiling point significantly between samples containing crumb rubber and polypropylene Analysis TGA/DTA to an increase in enthalpy and decomposition temperature with the addition of crumb rubber used and thermal stability.
The Effect Zeolite Addition in Natural Rubber Polypropylene Composite on Mechanical, Structure, and Thermal Characteristics Bukit, Nurdin; Frida, Erna
Makara Journal of Technology Vol. 17, No. 3
Publisher : UI Scholars Hub

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

This study was conducted to determine the effect of zeolite as filler on mechanical properties, and thermal structure blends of natural rubber and polypropylene (NR/PP). In this study, NR/PP/PP-g-MA blends was filled uncalcined zeolite and calcined zeolite at different weight percent of the 2, 4, and 6%. Samples were characterized to determine the tensile strength, fracture elongation and Young's modulus. Structure of the samples was investigated using XRD method and thermal characteristics were analyzed using DTA/TGA technique. The results obtained for tensile strength showed a significant influence with the addition zeolite of the NR/PP blends at 2% by weight of the composition (8 MPa) and decreased with increasing zeolite composition uncalcined zeolite or calcined zeolite. At 2% to 6% by weight of an increase in Young's modulus, for which uncalcined zeolite function more effectively than the calcined zeolite. On the other hand, the addition of uncalcined zeolite and calcined zeolite did not result in decreased fracture elongation. The XRD analysis zeolite indicate the existence of amorphous phase and crystalline mineral type mordenite (CaAl2Si10O24.7 H2O). In general, cristality of samples filled with calcined zeolite slightly higher than the uncalcined zeolite at the same amount and intercalation occurs between the zeolite matrix NR/PP. Thermal analysis showed that the samples are filled with calcined zeolite has a thermal resistance higher than the uncalcined zeolite, the melting point NR/PP 165.0 °C with the addition of 6 wt% zeolite melting point to 186.7 °C.