Claim Missing Document
Check
Articles

Found 7 Documents
Search

Analisis Genangan Banjir Akibat Debit Puncak di DAS Baubau Menggunakan HEC-RAS dan GIS Nuzul, Muhammad; Achmad, Mahmud; Soma, Andang Suryana
Jurnal Pembangunan Wilayah dan Kota Vol 17, No 2 (2021): JPWK Volume 17 No. 2 June 2021
Publisher : Universitas Diponegoro, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.14710/pwk.v17i2.34152

Abstract

The history of floods that have occurred in Baubau City from 2009 to 2018 occurred as many as 20 cases, submerging population buildings with a total of 1,206 units. To reduce the impacts that have previously occurred, this study aims to determine the potential flood areas in the Baubau watershed with a return period of 5 to 100 years. The first thing to do is to know the design flood discharge using 10 years of rainfall data analyzed by the Nakayasu Synthetic Unit Hydrograph method. From the results of the field survey data on river hydrological characteristics and watershed morphometric parameters were obtained then analyzed with a hydraulic model using HEC-RAS 5.0.7 software then exported to HEC-GeoRAS is a tool of ArcGis version 10.5. Based on the results of the hydrological model integrated into the hydraulic model in the findings of this study, an estimate of physical, social and economic losses is obtained as well as maps of spatial-based flood potential areas that occur in 3 sub-districts namely Murhum sub-district, Batupoaro sub-district and Wolio sub-district scattered in 7 urban villages through which the Baubau river flows with a high risk class status level.
PKM Kelompok Tani Sawah Tadah Hujan di Kelurahan Banyorang Kecamatan Tompobulu Kabupaten Bantaeng Iqbal, Iqbal; Achmad, Mahmud; Supratomo, Supratomo; Yumeina, Diyah
Abdi Techno Jurnal AbdiTechno, Vol. 1, Nomor 1, Januari 2021
Publisher : Departemen Teknologi Pertanian Universitas Hasanuddin

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (699.427 KB) | DOI: 10.70124/abditechno.v1i1.109

Abstract

Padi adalah komoditas utama yang berperan sebagai pemenuh kebutuhan pokok karbohidrat bagi penduduk Indonesia. Usaha untuk meningkatkan produksi padi telah berhasil dilakukan oleh pemerintah, namun belum diikuti dengan penanganan pascapanen yang baik. Perontokan padi saat panen secara manual (gebot) menyebab tingkat kehilangan mendekati 5%. Sekitar 1000 ha persawahan yang ada di kecamatan Tompobulu berada pada ketinggian 500 meter dari permukaan laut (mdpl) dengan petakan-petakan kecil (<0,15 ha) dan berpola sawah terassering. Masalah utama yang dihadapi petani di kecamatan Tompobulu kabupaten Bantaeng dalam penanganan pascapanen padi adalah tingginya susut (losses) baik secara kuantitatif maupun kualitatif. Permasalahan tersebut berakibat adanya kecenderungan tidak memberikan insentif kepada petani untuk memperbaiki tingkat pendapatannya. Padi atau gabah yang kadar airnya tinggi mempunyai sifat mudah rusak dan akan mengalami susut pada saat penanganan pascapanen. Menurut BPS (2016) angka produksi gabah sebesar 75 juta ton GKG (Gabah Kering Giling) sesungguhnya dapat lebih tinggi lagi apabila dilakukan penanganan yang baik pada saat panen. Hasil survei Badan Pusat Statistik (BPS, 2016) menunjukkan bahwa susut hasil panen padi di Indonesia saat ini masih cukup tinggi, yaitu 9,5% yang terjadi pada saat panen dan 4,8% saat perontokan. Penanganan pascapanen yang baik dan tepat dapat menekan susut dan menghasilkan kualitas gabah/beras yang tinggi sehingga dapat meningkatkan harga jual gabah/beras petani. Teknologi penekanan kehilangan hasil yang dipilih untuk diterapkan harus teknologi yang sesuai dengan spesifik lokasi. Teknologi tersebut tidak bertentangan dengan masyarakat pengguna, baik secara teknis, ekonomis maupun sosial budaya masyarakat setempat. Secara umum metode atau teknologi untuk menekan kehilangan hasil panen dapat ditempuh dengan sistem panen beregu, yang dilengkapi dengan unit alat perontok dengan penerapan proses yang baik. Pada daerah dengan pemilikan lahan sempit, penerapan teknologi yang dapat dilakukan yaitu dengan cara pengembangan sistem panen yang dilengkapi dengan mesin perontok padi atau Power Thresher. Permasalahan di atas mengindikasikan bahwa teknologi tepat guna berupa perontok gabah (power thresher) sangat dibutuhkan oleh petani di kelurahan Banyorang kecamatan Tompobulu, mengingat topografi persawahan yang terletak di daerah perbukitan (ketinggian ± 500 mdpl) dengan persawahan berbentuk terasering sehingga tidak memungkinkan alat dan mesin panen modern (combine rice harvester) beroperasi di daerah tersebut.
Penerapan Mesin Pemotong Padi (Power rice cutter) pada Kelompok Tani Padi Di Kelurahan Banyorang Kabupaten Bantaeng Salim, Iqbal; Rizal, Muhammad; Azis, Abdul; Achmad, Mahmud; Gemala Hardinasinta; Husnul Mubarak; Mursalim; Junaedi Muhidong; Salengke; Ahmad Munir; Sitti Nur Faridah; Abdul Waris; Daniel Useng; Suhardi; Diyah Yumeina; Olly Sanny Hutabarat; Haerani; Muhammad Tahir Sapsal; Intan Febriana; Hartono; Anugrah Feri Hermanto; Dedianto Pasomba
Abdi Techno Jurnal AbdiTechno, Vol. 4, Nomor 2, Juli 2024
Publisher : Departemen Teknologi Pertanian Universitas Hasanuddin

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.70124/abditechno.v4i2.1361

Abstract

Pemotongan padi saat panen secara manual dengan sabit menyebab tingkat kehilangan mendekati 5%. Sekitar 1000 ha persawahan yang ada di kecamatan Tompobulu berada pada ketinggian 500 meter dari permukaan laut (mdpl) dengan petakan-petakan kecil (<0,15 ha) dan berpola sawah terassering. Masalah utama yang dihadapi petani di kecamatan Tompobulu kabupaten Bantaeng dalam penanganan panen padi adalah tingginya susut (losses) baik secara kuantitatif maupun kualitatif. Permasalahan tersebut berakibat adanya kecenderungan tidak memberikan insentif kepada petani untuk memperbaiki tingkat pendapatannya. Padi atau gabah yang kadar airnya tinggi mempunyai sifat mudah rusak dan akan mengalami susut pada saat penanganan panen. Menurut BPS (2021) angka produksi gabah sebesar 75 juta ton GKG (Gabah Kering Giling) sesungguhnya dapat lebih tinggi lagi apabila dilakukan penanganan yang baik pada saat panen (2). Hasil survei Badan Pusat Statistik (BPS, 2021) menunjukkan bahwa susut hasil panen padi di Indonesia saat ini masih cukup tinggi, yaitu 9,5% yang terjadi pada saat panen dan 4,8% saat perontokan (2). Penanganan panen yang baik dan tepat dapat menekan susut dan menghasilkan kualitas gabah/beras yang tinggi sehingga dapat meningkatkan harga jual gabah/beras petani. Teknologi penekanan kehilangan hasil yang dipilih untuk diterapkan harus teknologi yang sesuai dengan spesifik lokasi. Secara umum metode atau teknologi untuk menekan kehilangan hasil panen dapat ditempuh dengan sistem panen beregu, yang dilengkapi dengan unit alat pemotong dan perontok dengan penerapan proses yang baik. Pada daerah dengan pemilikan lahan sempit, penerapan teknologi yang dapat dilakukan yaitu dengan cara pengembangan sistem panen yang dilengkapi dengan mesin pemotong padi (power rice cutter) dan perontok padi atau Power Thresher.
Pengaruh Penggunaan Lahan Terhadap Debit Banjir Rancangan Di DAS Baubau Nuzul, Muhammad; Achmad, Mahmud
Dampak Vol 19, No 1 (2022)
Publisher : Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/dampak.19.1.22-29.2022

Abstract

ABSTRACTThis research was conducted in the city of Baubau, Southeast Sulawesi Province, the location is focused on the area directly adjacent to the Baubau River which has a river length of 15,704 Km in the Baubau catchment with an area of 76,117 Km2. which empties into residential areas as areas where seasonal floods often occur. To reduce the risk of loss due to the impact of flooding flood control efforts are needed that can be carried out properly if the flood discharge design of the repeat design can be known. This study aims to analyze changes in land use against runoff coefficient with flood discharge design period of time in Baubau watershed. The analysis used is the descriptive analysis regarding the spatial distribution pattern of land use and its effect on the runoff coefficient in 2019. Then to get the discharge plan for the return time analysis was carried out using the Nakayasu Empirical method or the Synthetic Unit Hydrograph (HSS) with rainfall data for 2010 to 2019 obtained from the BMKG Betoambari station in Baubau City. From the results of the analysis, it will be obtained the flood discharge plans for the return period of 5, 10, 20, 25, 50, and 100 years.Keywords: Baubau watershed, flood discharge, hydrograph ABSTRAKPenelitian ini dilakukan di Kota Baubau Provinsi Sulawesi Tenggara, lokasi difokuskan pada wilayah yang berbatasan langsung dengan Sungai Baubau yang memiliki panjang sungai 15.704 Km di DAS Baubau dengan luas wilayah 76.117 Km2. yang bermuara di pemukiman penduduk sebagai daerah yang sering terjadi banjir musiman. Untuk mengurangi resiko kerugian akibat dampak banjir diperlukan upaya pengendalian banjir yang dapat dilakukan dengan baik jika debit banjir desain desain ulang dapat diketahui. Penelitian ini bertujuan untuk menganalisis perubahan penggunaan lahan terhadap koefisien limpasan dengan debit banjir periode rencana waktu di DAS Baubau. Analisis yang digunakan adalah analisis deskriptif mengenai pola sebaran spasial penggunaan lahan dan pengaruhnya terhadap koefisien limpasan Tahun 2019. Kemudian untuk mendapatkan debit rencana waktu ulang dilakukan analisis dengan menggunakan metode Empiris Nakayasu atau Hidrograf Satuan Sintetis (Synthetic Unit Hydrograph). HSS) dengan data curah hujan tahun 2010 sampai dengan tahun 2019 diperoleh dari stasiun BMKG Betoambari Kota Baubau. Dari hasil analisa tersebut akan diperoleh debit banjir rencana kala ulang 5, 10, 20, 25, 50 dan 100 tahun.Kata kunci: DAS Baubau, debit banjir, hidrograf
Determination of Rice Field Potential Index Based on Geographic Information System in Gowa Regency Rahmatya, Desi; Achmad, Mahmud; Samsuar
Salaga Journal Volume 02, No. 2, December 2024
Publisher : Program Studi Teknik Pertanian Universitas Hasanuddin

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.70124/salaga.v2i2.1778

Abstract

The Index of Land Potential (IPL) is a land evaluation method that aims to identify and utilize land according to its potential. Through IPL, it is expected to achieve optimal productivity and land sustainability. This research aims to determine the Paddy Field Potential Index with the IPL weighting method using Geographic Information Systems (GIS) in Gowa Regency. In this research, the method used is a tiered quantitative approach, where each parameter is given an appropriate weight. Overlapping techniques were applied to various maps used to assess land potential, including aspects of slope, soil type, lithology, hydrology, and disaster risk. The results of this study include a land potential index map and a map of paddy field potential in Gowa Regency. In the LMI, the dominating classes are low and very low, covering an area of 156,885.34 ha (72%), while the use of paddy fields in the very high and high potential classes covers an area of 20,604.48 ha (39%). The relationship between productivity and IPL is explained through the equation IPL = 0.1025P + 4.9539 with a value of R2 = 0.7809, which indicates that an increase in IPL can be a guide to increasing the productivity of rice plants..
Automation of a Combustion Engine-Driven Sprinkler Irrigation Pump in Shallot (Allium ascalonicum) Cultivation Rosalinda, Rosalinda; Sapsal, Muhammad Tahir; Achmad, Mahmud; Olly Sanny, Hutabarat; Ahmad, Munir; Suhardi, Suhardi
Salaga Journal Volume 03, No. 1, June 2025
Publisher : Program Studi Teknik Pertanian Universitas Hasanuddin

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.70124/salaga.v3i1.1823

Abstract

Sprinkler irrigation control is necessary not only for efficiency but also for reducing bulb rot in shallot cultivation caused by excessive watering. This study developed an Arduino-based automatic control system for a combustion-engine-powered sprinkler irrigation setup to prevent overwatering in shallot farming in Enrekang Regency, Indonesia. The system used a servo motor to adjust the throttle lever of the combustion engine, allowing it to stop pumping the water when the soil moisture level detected by the YL-69 sensor exceeded the optimal threshold. This ensured that the irrigation was applied according to the ideal soil moisture level. The testing included infiltration rate measurement, sprinkler uniformity analysis, sensor calibration, system performance evaluation, and shallot yield assessment. The results showed an average irrigation uniformity coefficient (CU) of 84.34%, with the system operating for 10–28 minutes to maintain soil moisture at no more than 70%. The plot using the control system yielded 140 kg of shallots, whereas the plot without the system produced only 96.2 kg. Additionally, the percentage of rotten shallots in the control plot was 5%, which was significantly lower than that observed in the uncontrolled plot (18%). This system effectively reduced bulb rot, demonstrating its feasibility for optimizing water use and improving crop productivity in areas without access to electricity.
THE ANALYSIS OF PRODUCTION CAPACITY USING ROUGH CUT CAPACITY PLANNING METHOD (CASE STUDY AT PT. UNTUK INDONESIA HIJAU): Analisis Kapasitas Produksi Menggunakan Metode Perencanaan Kapasitas Kasar (Studi Kasus di PT. Untuk Indonesia Hijau) Hidayat, Amri; Achmad, Mahmud; Munira
Jurnal Agrisistem: Seri Sosek dan Penyuluhan Vol. 21 No. 1 (2025): Jurnal Agrisistem: Seri Sosek dan Penyuluhan
Publisher : Unit Penelitian dan Pengabdian Masyarakat Politeknik Pembangunan Pertanian Gowa

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.52625/j-agr-sosekpenyuluhan.v21i1.457

Abstract

PT. Untuk Indonesia Hijau is a small-scale company based in Indonesia, specializing in the processing of cocoa beans to produce fermented cocoa beans, cocoa mass, and chocolate bars. Currently, the company's production process is driven by customer demand, often neglecting the efficient utilization of available facilities and resources, resulting in escalated operational costs. The existing workstations exhibit underutilized resources while certain machines and workers are overloaded in specific conditions. The objective of this study is to thoroughly evaluate and analysis the production capacity of each workstation for the production of each product. This comprehensive evaluation and analysis, employing the Rough-Cut Capacity Planning method, encompasses production forecasting, calculation of available capacity at each workstation, determination of the required capacity for each workstation, and a rigorous capacity feasibility test by comparing available capacity with required capacity. The findings of the Rough-Cut Capacity Planning using the CPOF method indicate that nearly all workstations demonstrate positive capacity values over 12 months, indicating that available capacity can satisfy production demands. However, there exists a considerable excess work capacity, underscoring the need for additional strategies to optimize operation efficiency