cover
Contact Name
Ahmad Ashifuddin Aqham
Contact Email
ahmad.ashifuddin@gmail.com
Phone
+6285726173515
Journal Mail Official
katon@politeknikpratama.ac.id
Editorial Address
Politeknik Pratama Purwokerto Alamat : Komplek Purwokerto City Walk (PCW) Jl. H.R. Bunyamin Blok A 11-12 Purwokerto 53121 email : admisi@politeknikpratama.ac.id, website : www.politeknikpratama.ac.id
Location
Kab. demak,
Jawa tengah
INDONESIA
Jurnal Penelitian Rumpun Ilmu Teknik
ISSN : 29638178     EISSN : 29637813     DOI : 10.55606
Sistem Komputer / Teknik Komputer Sistem Informasi Teknik Perangkat Lunak Teknologi Informasi Teknik Informatika / Ilmu Komputer Bidang-bidang lainnya yang termasuk ke dalam rumpun ilmu tersebut.
Articles 272 Documents
Desain Buck-Boost Converter MPPT Berbasis Feedforward Neural Network (ANN) pada Sistem Photovoltaic Dwi Wahyu Irawan; Junaidi Akbar; Amin Suyitno; Ramona Dyah Safitri
Jurnal Penelitian Rumpun Ilmu Teknik Vol. 5 No. 4 (2026): Jurnal Penelitian Rumpun Ilmu Teknik
Publisher : Lembaga Pengembangan Kinerja Dosen

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55606/juprit.v5i4.7109

Abstract

The development of renewable energy technology has encouraged the utilization of photovoltaic (PV) systems as an alternative energy source. However, variations in irradiance and temperature cause changes in PV output power, making it difficult to maintain the Maximum Power Point (MPP). This study aims to design and analyze a Maximum Power Point Tracking (MPPT) system based on an Artificial Neural Network (ANN) integrated with a buck-boost converter for a PV system. The system was simulated using MATLAB/Simulink with a 100 Wp PV module and a Feedforward Neural Network (FNN) trained using the Levenberg–Marquardt (LM) algorithm. The FNN uses irradiance and temperature as inputs and generates the duty cycle as the converter control output. Testing was conducted under 16 conditions with irradiance levels of 300–1000 W/m² and temperatures of 25–40°C. The training results achieved a correlation coefficient of 0.92, with a duty cycle ranging from 0.40 to 0.45. The highest PV power was 99.84 W at 1000 W/m² and 25°C, with an output power of 92.85 W and an efficiency of 93.00%. The results demonstrate that the FNN-based MPPT system can adjust the duty cycle according to changes in PV conditions.
Rancang Bangun Mesin Pemipil Biji Jagung Metode Silinder Spiral Penggerak Motor Listrik Kapasitas 30 Kg/Jam Mahesha Gibrani; Yopi Herdiyana; Muhammad Ridwan
Jurnal Penelitian Rumpun Ilmu Teknik Vol. 5 No. 4 (2026): Jurnal Penelitian Rumpun Ilmu Teknik
Publisher : Lembaga Pengembangan Kinerja Dosen

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55606/juprit.v5i4.7125

Abstract

Corn shelling is a crucial post-harvest stage that determines time and labor efficiency. However, many small-scale farmers still rely on manual methods characterized by low productivity and relatively long processing times. This study aims to design and construct a spiral cylinder-based corn sheller powered by an electric motor, with a target capacity of 30 kg/hour. The research methodology includes needs analysis, mechanical design, fabrication, and machine performance testing. Testing was conducted using 30 kg of hybrid corn with a moisture content of approximately 12%, divided into three sessions of 10 kg each, lasting 20 minutes per session. The evaluation parameters included working capacity, shelling efficiency, and the level of grain damage. The results showed that the machine achieved an average working capacity of 30 kg/hour, with a shelling efficiency of 83.3% and minimal grain damage. These findings indicate that the spiral cylinder mechanism can support stable and effective shelling operations. The use of an electric motor also provides an alternative for reducing dependence on manual labor during post-harvest activities. The developed machine has the potential to help smallholder farmers improve productivity and operational efficiency at an affordable manufacturing cost. Therefore, this corn sheller can serve as an appropriate technological alternative to support more effective post-harvest corn handling and improve the efficiency of small-scale agricultural production.
Pemodelan Integrasi Data Spasial UMKM Berbasis WebGIS untuk Mendukung Perencanaan Ekonomi Lokal di Desa Jono Oge Muhammad Adhim Halim; Muhammad Ilham; Nini Rahayu Nur; Ayu Putri Utami
Jurnal Penelitian Rumpun Ilmu Teknik Vol. 5 No. 4 (2026): Jurnal Penelitian Rumpun Ilmu Teknik
Publisher : Lembaga Pengembangan Kinerja Dosen

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55606/juprit.v5i4.7132

Abstract

Local economic planning requires information on the types and locations of businesses together with explicit evidence of data quality. This study develops a WebGIS spatial data integration model to support an initial business profile and the identification of further information needs in Jono Oge Village, Sigi Regency. A descriptive case study linked two KMZ datasets to photographs, overlaid business points with five hamlet polygons, and matched them to OpenStreetMap roads. Business categories were inferred from names and cross-tabulated by provisional hamlet assignment. The resulting inventory contained 67 business entries and one village office linked to 70 photographs. Trade accounted for 30 entries (44.78%), followed by agriculture and feed with 13 (19.40%). Hamlet 1 contained eight agriculture and feed entries, while Hamlet 5 contained three of the six livestock entries. These distributions support the organization of follow-up inquiries into products, markets, and business support needs. Data quality evaluation distinguished recorded attributes from spatially derived information. Geocoding and location verification evidence remained insufficient to calculate composite geolocation scores. The model provides a traceable information base for local economic planning; it does not establish leading sectors, economic impacts, or the completeness of village-wide business coverage.
Keropos Lokal sebagai Cacat Penampang Kritis: Bukti Eksperimental Kapasitas Aksial dan Lokalisasi Keruntuhan Kolom Beton Bertulang Faizal Romyta Sydore; Fahrudin Fahrudin; Teguh Prayitno; Nurul Yuhanafia; Ruben Bayu Kristiawan; Johan Lautan Wijaya Nusantara
Jurnal Penelitian Rumpun Ilmu Teknik Vol. 5 No. 4 (2026): Jurnal Penelitian Rumpun Ilmu Teknik
Publisher : Lembaga Pengembangan Kinerja Dosen

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55606/juprit.v5i4.7144

Abstract

This study evaluates axial capacity and failure localization in reinforced concrete columns with a controlled local cross-sectional reduction used as a model of honeycombing. Eight 125 × 125 × 750 mm columns were loaded in nominally concentric compression at 28 days: two intact controls and two specimens each with a defect at the support (K0), quarter height (K1/4), and midheight (K1/2). The 40 mm-high defect removed 387.84 cm³, equivalent to 3.31% of the gross column volume, and left a 77 × 77 mm section, corresponding to a 62.05% local area loss. Mean maximum loads for N, K0, K1/4, and K1/2 were 389.44, 250.14, 217.37, and 220.87 kN, respectively. The reductions relative to N were 35.77%, 44.19%, and 43.29%. N and K0 shared the first batch, whereas K1/4 and K1/2 shared the second batch, whose mean cylinder strength was lower (19.15 versus 24.41 MPa). Thus, the latter two reductions combine defect and batch differences. Within the second batch, K1/4 and K1/2 differed by 1.61% in mean load. Failure localized at the reduced section in all defective specimens. The contribution is a descriptive comparison of controlled defect locations and failure patterns; two replicates per group, batch differences, and regular defect geometry limit causal inference and application to field honeycombing.
Studi Eksperimental Getaran Mesin Bubut Celtic 14 Berdasarkan Variasi Kecepatan Putar dan Kedalaman Pemotongan Mohammad Luthfi Hussain; Romli Romli; Yogi Eka Fernandes
Jurnal Penelitian Rumpun Ilmu Teknik Vol. 5 No. 4 (2026): Jurnal Penelitian Rumpun Ilmu Teknik
Publisher : Lembaga Pengembangan Kinerja Dosen

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55606/juprit.v5i4.7169

Abstract

This study aims to analyze the effect of spindle rotation variations  and feeding depth on vibration in Celtic 14 lathes. The study used an experimental method with three rotation variations, namely 290 rpm, 460 rpm, and 515 rpm, as well as feeding depths of 0.5 mm, 1.0 mm, and 1.5 mm. Vibration measurement was carried out using a vibration meter in the vertical and horizontal directions. Each combination of parameters was carried out three times for 5 seconds and then the average value was calculated. The results showed the highest vertical vibration of 5.03 mm/s at 515 rpm and a depth of 1.0 mm, while the highest horizontal vibration was 4.20 mm/s at 515 rpm and a depth of 1.5 mm. The lowest values are 0.40 mm/s in the vertical direction at 290 rpm and 0.5 mm and 0.23 mm/s in the horizontal direction at 460 rpm and 0.5 mm, respectively. Based on the ISO 10816 classification, the maximum vertical values include zone C and horizontal zone B. High rotation tends to increase vibration, while small depth results in more stable turning.
Prediction of Waste-to-Energy Potential from Municipal Solid Waste Using Random Forest Regression Herlina Herlina; Indriyani Indriyani; Hafiz Muchti Kurniawan; Shabriyani Hatma; Sary Shandy
Jurnal Penelitian Rumpun Ilmu Teknik Vol. 5 No. 4 (2026): Jurnal Penelitian Rumpun Ilmu Teknik
Publisher : Lembaga Pengembangan Kinerja Dosen

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55606/juprit.v5i4.7170

Abstract

Municipal solid waste (MSW) is increasingly considered a feedstock for waste-to-energy (WtE) systems, yet recoverable electricity depends strongly on waste composition and moisture. This study applied Random Forest regression to predict net electricity yield from MSW and identify its main drivers. A synthetic dataset of 600 MSW scenarios was generated from literature-informed ranges for waste generation, organic, paper, plastic, other combustible and inert fractions, and moisture content. Electricity yield was calculated from a lower heating value-based energy balance. The data were divided 80:20 for training and testing, and Random Forest hyperparameters were tuned using five-fold cross-validation. Multiple linear regression and a decision tree were used as baseline models. Random Forest achieved a test R² of 0.835, RMSE of 30.1 kWh/t, and MAE of 24.6 kWh/t. Moisture content and plastic fraction were the strongest predictors, with importance values of 54.5% and 20.7%, respectively. Predicted yield declined from 474.1 to 398.3 kWh/t across low to high organic-fraction classes. The results indicate that moisture reduction is a key technical lever for improving WtE potential, although validation with measured Indonesian waste data remains necessary.
Penerapan Material Berkelanjutan pada Perencanaan Pelebaran Jalan Kopo – Soreang Hafizh Arya Bima; Rina Marina Masri; Yudi Sekaryadi
Jurnal Penelitian Rumpun Ilmu Teknik Vol. 5 No. 4 (2026): Jurnal Penelitian Rumpun Ilmu Teknik
Publisher : Lembaga Pengembangan Kinerja Dosen

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55606/juprit.v5i4.7236

Abstract

The 11.7 km Kopo–Soreang Road is an important corridor connecting Bandung City and Bandung Regency and experiences traffic congestion during peak hours. This study aims to analyze the existing traffic conditions, design the pavement structure for road widening, evaluate the implementation of sustainable materials, and estimate the project cost. A quantitative approach was employed using traffic data, road inventory data, and *International Roughness Index* (IRI) measurements. Traffic performance analysis was conducted based on the 2023 Indonesian Road Capacity Guidelines (PKJI), while pavement design referred to the 2024 Pavement Design Manual (MDPJ). The results indicate that the existing Degree of Saturation (DS) ranges from 0.371 to 0.552, with a peak traffic volume of 1,741.40 pcu/h. The widening of the 4/2 Undivided Collector Road to a width of 14 m for a 20-year design life (ESA₅ = 2,191,493) resulted in a pavement structure consisting of a 40 mm AC-WC layer, 65 mm and 80 mm AC-BC layers, 200 mm Class A Aggregate Base, 150 mm Class B Aggregate Base, and a 40 mm AC-WC overlay based on an average IRI value of 2.21 m/km. Sustainable construction was implemented through the use of nickel slag, 50%–70% *Reclaimed Asphalt Pavement* (RAP), precast U-Ditch drainage, and a local Asphalt Mixing Plant (AMP), reducing embodied carbon by 42.45. Based on the 2026 Bina Marga AHSP, the sustainable alternative requires a total project cost of IDR 69,620,015,971.49, representing a 7.87% increase compared with the conventional alternative costing IDR 64,539,406,664.45.
Pengaruh Ukuran Mesh dan Komposisi Serbuk Sabut Kelapa terhadap Karakteristik Lentur Komposit Polyester-Serat Rami untuk Aplikasi Furnitur dan Otomotif Raffi Akbar Trisnaputra; Oleh Oleh; Nanang Burhan
Jurnal Penelitian Rumpun Ilmu Teknik Vol. 5 No. 2 (2026): Jurnal Penelitian Rumpun Ilmu Teknik
Publisher : Lembaga Pengembangan Kinerja Dosen

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55606/juprit.v5i2.7244

Abstract

Furniture and automotive industries require strong, lightweight, and environmentally friendly alternatives to particle board and ABS plastic. This research evaluated the effect of mesh size and coconut coir powder composition on the flexural characteristics of ramie fiber-reinforced polyester composites. Specimens were fabricated by hand lay-up with a constant 5% ramie fiber volume fraction, coir powder volume fractions of 10%, 15%, and 20%, and mesh sizes of 20 and 30. Three-point bending tests followed ASTM D790. The optimum combination was the 20-mesh specimen with 15% coir powder, producing the highest flexural strength of 30.90 MPa and a flexural modulus of 1143.33 MPa. This performance was attributed to a more homogeneous matrix density, which resulted in the fewest voids and no dominant fiber pull-out. All variations exceeded the 18.04 MPa minimum of SNI 03-2105-2006 for high-load furniture panels (Type 18), indicating that the composite is feasible as a particle board substitute. However, its maximum flexural strength remains below the 71 MPa ISO 178 reference for ABS plastic in motorcycle body covers.
Analisis Hubungan Geometrik Jalan terhadap Tingkat Kerawanan Kecelakaan Lalu Lintas: Sebuah Systematic Literature Review Pascarianto Putra Bura; Achmad Irfan Nur
Jurnal Penelitian Rumpun Ilmu Teknik Vol. 5 No. 4 (2026): Jurnal Penelitian Rumpun Ilmu Teknik
Publisher : Lembaga Pengembangan Kinerja Dosen

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55606/juprit.v5i4.7271

Abstract

Road traffic crashes remain a major public safety concern, while evidence concerning the contribution of road geometric characteristics to crash risk is dispersed and sometimes inconsistent. This systematic literature review synthesizes associations between horizontal curve radius, gradient, lane and shoulder width, sight distance, and crash frequency or severity; compares geometric configurations; examines dominant predictors; and considers environmental interactions. Following PRISMA 2020, 42 studies were included and assessed using five methodological quality criteria. Findings were organized into eight themes through narrative synthesis. Smaller curve radii, steep gradients, inadequate lane and shoulder dimensions, and restricted sight distance were generally associated with elevated crash risk. Horizontal curves tended to be linked to more severe crashes than straight sections, while T-intersections and poorly channelized junctions showed particular vulnerability. No single geometric characteristic emerged as a universally dominant predictor. Weather, lighting, and traffic volume may modify these relationships, although formal interaction analyses were uncommon. The findings support context-sensitive road safety design and systematic geometric audits; heterogeneous methods and incomplete full-text access limit generalization and warrant more standardized future research.
Kerangka Analisis Life Cycle Cost Berbasis Kondisi, Umur Layan, dan Nilai Konservasi untuk Perawatan Gereja Cagar Budaya di Tomohon Trivena Agata Ngantung; Debby Willar; Olivia Moningka
Jurnal Penelitian Rumpun Ilmu Teknik Vol. 5 No. 2 (2026): Jurnal Penelitian Rumpun Ilmu Teknik
Publisher : Lembaga Pengembangan Kinerja Dosen

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55606/juprit.v5i2.7276

Abstract

Heritage churches in Indonesia are usually repaired only after damage becomes visible, and their funding rarely looks beyond one budget year. Indonesian life cycle cost (LCC) studies mostly cover new buildings and investment feasibility, so they say little about how conservation value should shape the timing and type of intervention. This article develops an LCC framework for comparing reactive and preventive maintenance of a heritage church, with Gereja GMIM Sion Tomohon as the reference case. The framework was synthesised from ISO 15686-5, Indonesian heritage regulations, the Burra Charter, and earlier heritage maintenance studies. It links four component assessments (physical condition, remaining service life, conservation value, damage risk) to scheduling rules, two cost scenarios evaluated by net present value over 30 years, a sensitivity test, and a conservation screen. A parametric break-even model shows that, at a 6% real discount rate and a ten-year deferral of major repair, preventive work stays cheaper while its annual cost is below about 1.8% of the major repair cost without damage escalation, and below about 3.8% when waiting raises that cost by half. Damage escalation moved the threshold more than the discount rate did, so field records of damage spread deserve priority.