cover
Contact Name
I Gusti Ayu Lani Triani
Contact Email
lanitriani@unud.ac.id
Phone
-
Journal Mail Official
jrma@unud.ac.id
Editorial Address
PS. TIP FTP UNUD Kampus Bukit Jimbaran Bali Indonesia
Location
Kota denpasar,
Bali
INDONESIA
JURNAL REKAYASA DAN MANAJEMEN AGROINDUSTRI
Published by Universitas Udayana
ISSN : -     EISSN : 2503488X     DOI : -
Journal of Agroindustrial Technology aims to publish original research results and policy papers written by researchers, experts as well as practitioners, in the field of agroindustries. Journal of Agroindustrial Technology encompasses a broad range of research topics in in the field of agroindustries covering process technology, industrial system engineering, and environmental management. Only the articles consist of novelty and excellent scientific contribution in agroindustrial technology fields can published in Journal of Agroindustrial Technology.
Articles 286 Documents
Karakteristik Ekstrak Kulit Buah Kakao (Theobroma cacao L.) sebagai Sumber Antioksidan pada Perlakuan Ukuran Partikel dan Waktu Maserasi I Putu Lingsan Pratyaksa; G.P. Ganda Putra; Lutfi Suhendra
JURNAL REKAYASA DAN MANAJEMEN AGROINDUSTRI Vol 8 No 1 (2020): Maret
Publisher : Department of Agroindustrial Technology, Faculty of Agricultural Technology, Udayana University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24843/JRMA.2020.v08.01.p15

Abstract

Cocoa pod husk has not been used optimally by farmers, most of cocoa pod husk will discarded around the cacao tree or collected in one hole and then piled with soil. Cocoa pod husk waste can be used optimally by extracting polyphenol compounds which are used as natural antioxidant ingredients. This research aimed to determine the effect of particle size and maceration time on cocoa pod husk extract as a source of antioxidant and determine the best particle size and maceration time to produce cocoa pod husk extract as a source of antioxidants. This research used factorial randomized block design with two factors. Factor 1 is a particle size consisting of 40, 60, and 80 mesh. Factor 2 is maceration time consisting of 24, 36, and 48 hours. The data were analyzed by analysis of variance and then it will be proceed with tukey test. The results showed that particle size and maceration time affected yield, total phenolic and antioxidant capacity of cocoa pod husk extract, while the interaction was affected on total phenolic and antioxidant capacity but had no effect on yield of cocoa pod husk extract. The best treatment to produce cocoa pod husk extract as a source of antioxidants 80 mesh particle size and maceration time for 48 hours, with a yield value of 5.22 ± 0.05 percent, a total phenolic of 148.09 ± 0.00 mg GAE / g and antioxidant capacity of 118.71 ± 0.13 mg GAEAC / g.
Pengaruh Jenis Pelarut dan Waktu Maserasi terhadap Ekstrak Kulit Biji Kakao (Theobroma cacao L.) sebagai Sumber Antioksidan I Wayan Gde Angga Prasetya; G.P. Ganda Putra; Luh Putu Wrasiati
JURNAL REKAYASA DAN MANAJEMEN AGROINDUSTRI Vol 8 No 1 (2020): Maret
Publisher : Department of Agroindustrial Technology, Faculty of Agricultural Technology, Udayana University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24843/JRMA.2020.v08.01.p16

Abstract

Cocoa bean husk is a waste of cocoa processing that is large enough and has not been used optimally.  Cocoa bean husk waste can be used more optimally by extracting polyphenol compound and used as  natural antioxidant. This research aims to determine the effect of the type of solvent and maceration  time of cocoa bean husk extract as a source of antioxidants and to determine the best type of solvent  and maceration time to produce cocoa bean husk extract as a source of antioxidants. This experiment  uses a randomized block design with two factors. The first factor is the type of solvent consisting of methanol 95 percent, ethanol 96 percent and acetone 90 percent. The second factor is the maceration  time consisting of 24, 36 and 48 hours. The data is analyzed by variant analysis and continued with the  Tukey test. The results showed that the type of solvent and maceration time is a very significant effect  on yield, total phenolic and antioxidant capacity. The interaction between treatment is a very significant  effect on total phenolic and antioxidant capacity but did not significantly affect the yield of cocoa bean  husk extract. The best treatment to produce cocoa bean husk extract as a source of antioxidants is using  ethanol solvent and maceration time for 48 hours with a yield characteristic 11.72±0.45 percent, a total  phenolic at 80.76±1.12 mg of GAE/g and Antioxidant capacity 49.55±1.13 mg GAEAC/g.
Analisis Principal Component Analysis (PCA) Terhadap Fisikokimia Kue Basah Tradisional Sumatera Selatan Citra Defira; Hermanto; Onne Akbar Nur Ichsan; Citra Pratiwi Prayitno; Syifa’ Robbani
JURNAL REKAYASA DAN MANAJEMEN AGROINDUSTRI Vol 14 No 3 (2026): September
Publisher : Department of Agroindustrial Technology, Faculty of Agricultural Technology, Udayana University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24843/JRMA.2026.v14.03.p06

Abstract

This study aims to analyze the physicochemical quality of traditional South Sumatran cakes obtained from several producers in Palembang. The method used in this study is Principal Component Analysis (PCA) to analyze the relationship between physicochemical variables that affect product quality. The samples used consisted of three types of cakes (maksuba, engkak ketan, and delapan jam) from three different producers. The data obtained were analyzed using PCA. The results showed that there were significant differences in moisture, ash, fat, protein, and carbohydrate content between cake types and producers. The use of PCA was able to group the samples based on dominant physicochemical attributes. The two principal components obtained (PC1 and PC2) were able to explain a large proportion of the total variability of the data, indicating that the analyzed parameters have a strong contribution in differentiating the samples. The sample separation pattern in the PCA plot showed three clear clusters, indicating that each type of cake has a consistent chemical and textural profile within its group but significantly different between groups. These findings indicate that PCA is an effective tool in characterizing and standardizing the quality of traditional food products, and can be used to develop new formulations that are more consistent and competitive in the market. The results of this study are expected to be a reference in efforts to improve the quality and differentiation of traditional South Sumatran wet cake products.
Kelayakan Usaha dan Kesediaan membayar Terhadap Telur Asin Reverse Osmosis : Analisis Empiris melalui Studi Tekno-Ekonomi dan Penerimaan Pasar Faizal Syahmurman; Roni Kastaman; Yosini Deliana; Efri Mardawati; Devi Maulida Rahmah
JURNAL REKAYASA DAN MANAJEMEN AGROINDUSTRI Vol 14 No 3 (2026): September
Publisher : Department of Agroindustrial Technology, Faculty of Agricultural Technology, Udayana University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24843/JRMA.2026.v14.03.p02

Abstract

Salted egg production is conventionally carried out using traditional methods, which are time-consuming and rely heavily on duck eggs as the primary raw material. This study aims to assess the technical and financial feasibility and market acceptance of an innovative salted egg product made from chicken eggs processed using Reverse Osmosis (RO) technology. The research methodology included experiments on the salting process, financial analysis (Cost of Goods Sold (COGS), Break-Even Point (BEP), Net Present Value (NPV), Internal Rate of Return (IRR)), and a Willingness to Pay (WTP) survey involving 120 consumers. The WTP was evaluated using open-ended questionnaires and an iterative bidding technique. The results indicate that the RO method can significantly accelerate the curing process, reducing the time to just three days, while yielding good organoleptic quality and ensuring microbiological safety. Economically, the study found a COGS of IDR 4,267 per egg, a BEP achievable within 25 production cycles, and NPV and IRR values that affirm the investment's viability. From a market perspective, the highest consumer interest was observed at a price of IDR 8,500, reflecting strong acceptance of this innovative product. These findings underscore the potential for reverse osmosis salted eggs to be developed as a high-value-added agro-industrial product with promising market prospects, particularly for Micro, Small, and Medium Enterprises (MSMEs).
Analisis Pengendalian Kualitas Biji Kakao Menggunakan Metode SIX SIGMA di PTPN I Kebun Kalirejo Banyuwangi Danu Indra Wardhana; Diana Dwi Anggraeni; Andika Putra Setiawan
JURNAL REKAYASA DAN MANAJEMEN AGROINDUSTRI Vol 14 No 3 (2026): September
Publisher : Department of Agroindustrial Technology, Faculty of Agricultural Technology, Udayana University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24843/JRMA.2026.v14.03.p04

Abstract

PTPN I Regional 5 plays an important role in the development of the agricultural and plantation sectors, especially the Edel and Bulk cocoa types as its superior commodities. The problems faced are due to a decrease in production so that the quality of cocoa beans is not up to standard, non-uniformity and damage. The purpose of this study is to identify the types of defects and the number of defects, analyse the factors causing defective products, and formulate improvement proposals to reduce the number of defects. The methods used by Six Sigma include Define, Measure, Analyse, Improve and Failure Mode and Effect Analysis (FMEA). Production results in 2024 Edel Cocoa Beans were 3597 kg with 194 kg of defects. Meanwhile, Bulk is 5461 kg with 405 kg of defects. The types of defects are non-uniform size and hollow beans. DPMO value of Edel type is 26,966.92, final yield value is 97.31%. From the DPMO and final yield values, it is known that the sigma level is 3.5025. Bulk DPMO value 37,081.12, Final yield value 96.29%, From the DPMO value and final yield known sigma level is 3.3455. This shows the sigma capability of Edel and Bulk Cocoa Beans production has met the Indonesian final yield standard. The results of the FMEA analysis found 4 factors, namely raw materials, machines, methods and people.
Perancangan Ulang Tata Letak Industri FATETA Bakery Untuk Meningkatkan Efisiensi Produksi Shinta Syafrina Endah Hap Sari; Naswa Putri Purnami; Ryanzahra Nasywa Fatiha Adzkia; Ida Bagus Suryaningrat
JURNAL REKAYASA DAN MANAJEMEN AGROINDUSTRI Vol 14 No 3 (2026): September
Publisher : Department of Agroindustrial Technology, Faculty of Agricultural Technology, Udayana University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24843/JRMA.2026.v14.03.p10

Abstract

FATETA Bakery is a bread manufacturing company that was established in August 2023 with a production capacity of two batches per day, each using 7 kg of ingredients. The bread production process is divided into six closely related departments: ingredient preparation and weighing, ingredient mixing, rounding, baking, cooling, and packaging. However, the existing production layout was deemed inefficient, leading to issues in workflow and material handling costs. To address this, a layout improvement was implemented using the CRAFT method (Computerized Relative Allocation of Facilities Technique) with the aim of enhancing the effectiveness and efficiency of the production process. The results of the iterations through the add-in software showed a 25% increase in efficiency, resulting in operational cost savings of Rp73.038.720 per year.
Karakteristik Ekstrak Daun Bidara (Ziziphus mauritina L.) Pada Perlakuan Ukuran Partikel Dan Suhu Ekstraksi Elisabet Agustina Sihite; Ni Made Wartini; Anak Agung Made Dewi Anggreni
JURNAL REKAYASA DAN MANAJEMEN AGROINDUSTRI Vol 14 No 3 (2026): September
Publisher : Department of Agroindustrial Technology, Faculty of Agricultural Technology, Udayana University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24843/JRMA.2026.v14.03.p01

Abstract

Bidara leaf (Ziziphus mauritiana L.) are a rich source of bioactive compounds, including flavonoids, alkaloids, tannins, phenolics, and saponins, which exhibit antioxidant and surfactant properties. re a source of bioactive compounds such as flavonoids, alkaloids, tannins, phenols, and saponins that act as antioxidants and surfactants. This study aims to determine the effect of particle size and extraction temperature on the characteristics of bidara leaf extract as a source of saponins and to determine the best particle size and extraction temperature to produce bidara leaf extract as a source of saponins. Extraction was carried out using the maceration method with 86% methanol solvent for 48 hours. The study was designed using a factorial Randomized Block Design with two factors, namely particle size (40, 60, and 80 mesh) and extraction temperature (40°C, 50°C, and 60°C). The variables observed included yield, crude saponin content, foam height, and antioxidant capacity. Analysis was carried out using variance analysis and further Duncan's Multiple Range Test. The results showed that particle size and extraction temperature significantly affected all variables, while antioxidant capacity was significantly influenced by the interaction of the two factors. The results of the effectiveness index test showed that the combination of 80 mesh particle size and 40°C extraction temperature was the best treatment to produce bidara leaf extract with characteristics of 18.44% yield, 34.04% saponin content, 34.83 mm foam height, and 3.71 mg GAEAC/g antioxidant capacity.
Karakteristik Ekstrak Daun Bidara (Ziziphus Mauritiana L.) Pada Perlakuan Ukuran Partikel Dan Konsentrasi Metanol Sampang Riko Fernando Boang Menalu; Ni Made Wartini; Luh Putu Wrasiati
JURNAL REKAYASA DAN MANAJEMEN AGROINDUSTRI Vol 14 No 3 (2026): September
Publisher : Department of Agroindustrial Technology, Faculty of Agricultural Technology, Udayana University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24843/JRMA.2026.v14.03.p03

Abstract

Abstrak Bahasa Inggris (Huruf Sentence case TNR 11 spasi 1.0 before dan after 0pt, left dan right 0.5 Italic, Justify) The bidara plant (Ziziphus mauritiana L.) is a plant originating from dry and semi-dry climates. Bidara leaves are known to contain various bioactive compounds, including saponins, which have antioxidant activity. This study aims to determine the effect of particle size and methanol concentration on the characteristics of bidara leaf extract and to determine the best particle size and methanol concentration to produce bidara leaf extract. This study is an experimental study designed using a Randomized Block Design with a factorial experimental pattern. Two factors were tested, namely particle size consisting of 3 levels, namely 40, 60, and 80 mesh and methanol concentration consisting of 3 levels, namely 76%, 86%, and 96%. The results showed that the treatment of particle size and methanol concentration and the interaction between the two treatments affected the yield, saponin content, foam height, and antioxidant capacity of bidara leaf extract. The best treatment to produce bidara leaf extract using the effectiveness index test was the treatment of 80 mesh particle size and 86% methanol concentration with the characteristics of bidara leaf extract, namely a yield of 27.31±1.11%, saponin content of 52.94±0.63%, foam height of 26.83±0.71 mm, and antioxidant capacity of 3.783±0.23 mg GAEAC/g.
Karakteristik Nampan Biokomposit Foam Berbasis Tapioka Dan Glukomanan Pada Variasi Suhu Dan Waktu Pencetakan I Gede Rio Wiranata; Bambang Admadi Harsujuwono; Amna Hartiati; Sri Suhartini
JURNAL REKAYASA DAN MANAJEMEN AGROINDUSTRI Vol 14 No 3 (2026): September
Publisher : Department of Agroindustrial Technology, Faculty of Agricultural Technology, Udayana University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24843/JRMA.2026.v14.03.p07

Abstract

Biocomposite foam is one of the environmentally friendly packaging material innovations developed to replace styrofoam. This study aimed to determine the effect of molding temperature and time on the characteristics of biocomposite foam trays based on tapioca and glucomannan, as well as to determine the appropriate molding temperature and time to produce the best characteristics. This study used a factorial Randomized Block Design (RBD) with two factors, namely molding temperature consisting of 120°C, 150°C, and 180°C, and molding time consisting of 30 seconds, 60 seconds, and 90 seconds, resulting in 9 treatment combinations with 2 blocks. The variables observed in this study were tensile strength, tear resistance, elongation at break, permanent set, density, thickness swelling, thickness, biodegradation, and leakage test. The data were analyzed by analysis of variance and continued with Honestly Significant Difference (HSD) test. The results showed that molding temperature and time also their interacction had a highly significant effect on tensile strength, tear resistance, elongation at break, permanent set, density, swelling, and biodegradation, had no significant effect on thickness, and all treatments showed no leakage. The best treatment was obtained at a molding temperature of 120°C and a molding time of 90 seconds, with characteristics of tensile strength 7.939 N/cm², tear resistance 5.671 N/cm², elongation at break 3.973%, permanent set 8.740%, density 0.268 g/cm³, swelling 0.539%, thickness 0.315 cm, biodegradation 77.6% on the 20th day, and leakage test no leakage.
Karakteristik Biopelet Limbah Ceper Canang Pada Variasi Konsentrasi Perekat Tapioka Dan Lama Pengeringan Farhatun Annisa; Ni Kadek Diva Maharani; I Gusti Ayu Lani Triani; Lutfi Suhendra
JURNAL REKAYASA DAN MANAJEMEN AGROINDUSTRI Vol 14 No 3 (2026): September
Publisher : Department of Agroindustrial Technology, Faculty of Agricultural Technology, Udayana University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24843/JRMA.2026.v14.03.p14

Abstract

The high intensity of religious rituals in Bali has increased organic waste volume, particularly canang waste. The ceper part of canang, made from young coconut leaves, has potential as a biomass source due to its high lignocellulosic content; however, its utilization as alternative energy remains limited. This study aimed to determine the effects of tapioca adhesive concentration and drying duration on the characteristics of bio-pellets from ceper canang waste, and to identify the best treatment according to SNI 8021-2014 standards. This study employed a factorial Randomized Block Design with two factors: tapioca adhesive concentration (10%, 20%, 30%) and drying duration (1, 2, 3 hours) at 90°C. Parameters observed included yield, moisture content, ash content, volatile matter content, density, and calorific value.Results showed that the interaction between adhesive concentration and drying duration significantly affected all bio-pellet characteristics. Yield values ranged from 50.25–81.00%, moisture content 2.50–7.20%, ash content 3.21–8.05%, volatile matter content 32.19–75.07%, density 0.630–0.843 g/cm³, and calorific value 2328.31–4150.54 cal/g. The best treatment was a combination of 30% adhesive concentration and 3 hours of drying (A3T3), producing 3.51% moisture content, 8.05% ash content, 61.22% volatile matter content, 0.843 g/cm³ density, and 4012.88 cal/g calorific value. Under this treatment, the bio-pellet characteristics met SNI 8021-2014 quality standards for moisture content, volatile matter content, density, and calorific value, although the ash content remained above the maximum threshold.