cover
Article Per Year (5 Year)
All
Home Page
OAI Link
Editorial Team
Contact
Reviewer
Google Scholar
Contact Name
-
Contact Email
-
Phone
-
Journal Mail Official
-
Editorial Address
-
Location
Kota semarang,
Jawa tengah
INDONESIA
Jurnal Bahan Alam Terbarukan
Published by Universitas Negeri Semarang
ISSN : 23030623     EISSN : 24072370     DOI : -
Core Subject : Science,
Materials Science & Nanotechnology
This journal presents articles and information on research, development and applications in biomass conversion processes (thermo-chemical conversion; physico-chemical conversion and bio-chemical conversion) and equipment to produce fuels, power, heat, and value-added chemicals from biomass. A biorefinery takes advantage of the various components in biomass and their intermediates therefore maximizing the value derived from the biomass feedstock. A biorefinery could, for example, produce one or several low-volume, but high-value, chemical or nutraceutical products and a low-value, but high-volume liquid transportation fuel such as biodiesel or bioethanol (see also alcohol fuel). The high-value products increase profitability, the high-volume fuel helps meet energy needs, and the power production helps to lower energy costs and reduce greenhouse gas emissions from traditional power plant facilities. Future biorefineries may play a major role in producing chemicals and materials that are traditionally produced from petroleum.
Arjuna Subject : -
Articles 426 Documents
 20   21   22   23   24 
Modified Humic Acid from Peat Soils with Magnetite (Ha-Fe3O4) by Using Sonochemical Technology for Gold Recovery Rahmayanti, Maya; Santosa, Sri Juari; Sutarno, Sutarno
Jurnal Bahan Alam Terbarukan Vol 9, No 2 (2020): December 2020 [Nationally Accredited - Sinta 2]
Publisher : Universitas Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15294/jbat.v9i02.26131

Abstract

Sonochemical technology is a technology that involves ultrasonic waves in chemical reactions. In this study, humic acid isolated from peat soil has been successfully modified with magnetite (HA-Fe3O4) using sonochemical technology. Characterization of the physical and chemical properties of HA-Fe3O4 was carried out using FTIR, XRD, SEM and VSM. HA-Fe3O4 was used for recovery of gold from simulated gold waste (HAuCl4). FTIR characterization showed that the interaction between HA and Fe3O4 was through hydrogen bonds. The crystal size of HA-Fe3O4 using the Debye-Scherrer equation based on the XRD diffractogram was 12.4 nm. The saturation magnetization value of HA-Fe3O4 obtained was 52.80 emu/g. Adsorption studies at various pH showed that HA-Fe3O4 has been successful in recovering of gold from simulated gold waste. The % recovery of gold was 99%. Gold recovery occurs through the adsorption process followed by reduction of Au (III) to Au(0).
Effect of Chitosan, Clay, and CMC on Physicochemical Properties of Bioplastic from Banana Corm with Glycerol. Sugiharto, Agung; Syarifa, Adilla; Handayani, Nindita; Mahendra, Rizky
Jurnal Bahan Alam Terbarukan Vol 10, No 1 (2021): June 2021 [Nationally Accredited - SINTA 2]
Publisher : Universitas Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15294/jbat.v10i1.25323

Abstract

Bioplactic from banana corm and glycerol has been studied in this research. In addition, the physical chemical properties of it has been improved by adding chitosan, clay and CMC as filler and glycerol as plasticizer. Plastic that produced form organic material such as starch usually has poor properties in physical and mechanical. Composition variation of chitosan, clay and CMC as filler then combined by variation of glycerol as plasticizer have produced significant improve of the bioplastic physical properties. Properties of the bioplastic that studied in this research was focused to biodegradation, elongation, and tensile strength. The addition of fillers and plasticizers is carried out to produce a better bioplastics. This study used 3 variations of the filler composition : 4, 5, and 6 grams and 2 variations of the plasticizer composition: 1 ml and 2 ml. The bioplastics that produced were tested for tensile strength, elongation, and biodegradation of the soil for 7 days. The best tensile strength results is 8.43 MPa for bioplastic that using CMC fillers. On the other side, the best elongation percentage is 9.87% for bioplastic which using CMC fillers. The bioplastic that added Clay as filler can be degraded up to 100% in 7 days.
Production of Natural Colorant by Monascus Purpureus FNCC 6008 using Rice and Cassava as Carbon Substrates Margono, Margono; Paryanto, Paryanto; Hanifa, Vina; Abimanyu, Candra
Jurnal Bahan Alam Terbarukan Vol 10, No 1 (2021): June 2021 [Nationally Accredited - SINTA 2]
Publisher : Universitas Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15294/jbat.v10i1.30486

Abstract

Consumer recognition of the adverse effects of synthetic colorant has increased awareness in utilizing natural colorants as an alternative. One of them is a microbial colorant and it is already studied for its safety and functional properties in the human body, i.e. hypercholesterolemia, antimicrobial, antioxidant, and anticancer. The functional properties of microbial colorant have driven many kinds of research about natural colorant produced by the microorganism. Monascus pigment is one of the popular red pigment synthesized by mold Monascus purpureus. This research was conducted to investigate the effects of particle size and incubation temperature on color value and water solubility of the natural colorant produced by M. purpureus FNCC 6008 using rice and cassava as carbon substrates. Every experiment was conducted in an erlenmeyer flask filled by 15 g of substrates, sterilized and incubated in an incubator chamber. Three particle sizes of 8, 10, and 16 mesh were employed on the incubation temperatures of 30, 32, and 34 oC for 14 days. Two parameters were measured from the sample to evaluate the results of the fermentation process, i.e. color intensity and water solubility of product. The highest color intensity of 59.6 CVU/gds was obtained from the rice substrate at the particle size of 10 mesh and incubation temperature of 32 oC. That particular fermentation condition resulted in a product with 71.4% product solubility.
Effect of Ultrasonic Assisted on The Degree of Deacetylation of Chitosan Extracted from Portunus Pelagicus Buanasari, Buanasari; Sugiyo, Warlan; Rustaman, Heri
Jurnal Bahan Alam Terbarukan Vol 10, No 1 (2021): June 2021 [Nationally Accredited - SINTA 2]
Publisher : Universitas Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15294/jbat.v10i1.27648

Abstract

The technology for extracting chitin from shell and other materials needs to be continuously improved, including its conversion to chitosan. Chitosan is a biocompatible polymer, biodegradable, non-toxic, water-soluble at pH below 6.5, and it has protonated amino groups. The benefits of chitosan in industry, food and medicine make it necessary to fully study an efficient chitosan synthesis method and the results can be applied on an industrial scale. This study examined the effect of ultrasonic-assisted in increasing the degree of deacetylation of chitosan produced from Portunus pelagicus shell waste. The production process of chitosan goes through the stages of deproteination, demineralization and deacetylation. All these steps are ultrasound assisted processes with a frequency of 40 kHz through a digital ultrasonic cleaner. Ultrasonic-assisted chitin and chitosan were examined using FTIR spectrometry. The results showed that the ultrasonic method was able to increase the deacetylation degree of chitin with a value of 68.45±0.11% compared to 62.52±0.08% without ultrasonic. Application of ultrasonic assisted deacetylation gave a deacetylation degree of 85.35 ± 0.20%, higher than without ultrasonic 80.24 ± 0.19%.  Physically, ultrasonic-assisted chitosan is smoother and brighter in color. The ultrasonic-assisted chitosan manufacturing method could increase the deacetylation degree and produce high grade chitosan.
Purification of Used Cooking Oil by Alkali Neutralization and Bleaching of Bayah Natural Zeolite hendi, Endang Su; Rusdi, Rusdi; Alam, Bagja Nur; Nurbaeti, Siti
Jurnal Bahan Alam Terbarukan Vol 10, No 1 (2021): June 2021 [Nationally Accredited - SINTA 2]
Publisher : Universitas Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15294/jbat.v10i1.28636

Abstract

Cooking oil that is used repeatedly at high temperatures will reduce the quality of cooking oil. This will trigger the hydrolysis and oxidation processes that will change the characteristics of the oil, such as an increase in free fatty acid levels and peroxide numbers. Purification of used cooking oil can be carried out physically and chemically. The physical purification of oil is carried out by using adsorbents, while chemically purification process is carried out with an alkaline solution. Physically, natural materials such as zeolite can be used, where zeolite is a natural rock or mineral which chemically has a large surface area to be used in the adsorption process. Chemically with alkaline solution you can use sodium hydroxide (NaOH). In this study, used cooking oil is purified by three stages of the process, namely despicing, neutralization and bleaching to comply with the SNI quality standards. The purpose of this study was to determine the optimum operating conditions for the purification of used cooking oil in accordance with the quality standards for cooking oil. based on the results obtained by adding a NaOH concentration of 19% in the neutralization process and a zeolite concentration of 90% can reduce the acid number value of 2.4 mg NaOH/gr, the peroxide number is 7 mekO2/kg, the color degradation of used cooking oil is 51.83%.
Vinasse-Based Slow-Release Organo-Mineral Fertilizer with Chitosan-Bentonite Matrix Qudus, Nur; Kusumaningtyas, Ratna Dewi; Syamrizal, Zakky; Zakaria, Zainul Akmar; Hartanto, Dhoni
Jurnal Bahan Alam Terbarukan Vol 10, No 1 (2021): June 2021 [Nationally Accredited - SINTA 2]
Publisher : Universitas Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15294/jbat.v10i1.28829

Abstract

Controlling the release rate of the nitrogen-phosphorus-potassium (NPK) for the soil fertilized can enhance the fertilizer efficiency and reduce the drawback for the environmental. In this work, a novel slow-release organo-mineral fertilizer was produced from the vinasse, which was blended with the NPK and the chitosan-bentonite matrix. The NPK used as additional nutrients source and the chitosan-bentonite matrix was performed as a barrier to prevent the nitrogen, phosphorus, and potassium from a rapid dissolving. The NPK release rate was measured and analyzed after 3, 6, 9, and 12 days using the incubation method and leaching test. The most efficient release rate was obtained when a dry vinasse mixed with 9% NPK and 5% chitosan-bentonite matrix with the ratio of 8:2. The vinasse-based slow-release of organo-mineral fertilizer (SR-OMF) was compared to the vinasse organo-mineral fertilizer (OMF). The result indicated that the NPK release rate in the vinasse-based SR-OMF was lower compared to that in the vinasse OMF.
Potential of Energy Municipal Solid Waste (MSW) to Become Refuse Derived Fuel (RDF) in Bali Province, Indonesia Suryawan, I Wayan Koko; Wijaya, I Made Wahyu; Sari, Novi Kartika; Septiariva, Iva Yenis; Zahra, Nurulbaiti Listyendah
Jurnal Bahan Alam Terbarukan Vol 10, No 1 (2021): June 2021 [Nationally Accredited - SINTA 2]
Publisher : Universitas Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15294/jbat.v10i1.29804

Abstract

The generation of municipal solid waste (MSW) in Bali has various environmental impacts. One of the updates on sustainable waste processing is the RDF treatment plant processing. Before carrying out the processing, MSW characterization is needed because each region has a diverse composition. The processing of MSW into RDF provides benefits for achieving MSW reduction targets, renewable energy use, and the reduction of greenhouse gas (GHG) emissions. For this reason, this study was conducted to determine the potential of MSW in Bali as an alternative to renewable fuel and its potential to reduce GHG. MSW's potential calorific value as a raw material for RDF in Bali can reach 9.58 - 17.71 MJ/kg. The implementation of processing waste into RDF in pellets has shown a calorific value of ± 3904 - 4945 kkcal/kg. Implementing MSW processing into RDF in Bali can reduce GHG by 178 - 330 times compared to open dumping.
Preparation of Dye-Sensitized Solar Cell (DSSC) Using TiO2 and Mahkota Dewa Fruit (Phaleria Macrocarpa (Scheff) Boerl.) Extract Hindryawati, Noor; Hiyahara, Irfan Ashari; Saputra, Herdian; Arief, M. Syaiful; Maniam, Gaanty Pragas
Jurnal Bahan Alam Terbarukan Vol 10, No 1 (2021): June 2021 [Nationally Accredited - SINTA 2]
Publisher : Universitas Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15294/jbat.v10i1.32378

Abstract

A dye sensitized solar cell (DSSC) is a low-cost solar cell with attractive features. DSCC contains of photoelectrode, dye, electrolyte, and counter electrode with photoelectrochemical system. The aim of this research is to determine the percent efficiency produced by DSSC from the Mahkota Dewa extract. This was carried out in various stages, namely sample preparation and extraction, DSSC assembly, TiO2 characterization using Scanning Electron Microscopy (SEM), and testing its current and voltage. The results showed that the maximum wavelength of the Mahkota Dewa extract dye test using a UV-Vis spectrophotometer was 554 nm with an absorbance of 0.163, which was believed to be the wavelength of flavonoid and anthocyanin compounds. Based on the characterization results, surface morphology was spherical and agglomerated. However, after being soaked in the dye, the surface morphology of the TiO2 layer did not appear spherical on the surface that was expected to have been covered by the dye. The measurement using sunlight sources showed that the maximum current and voltage of DSSC with a concentration of 30% w/v was 21.8x10-4A and 58.86 V with an efficiency of 22.43x10-3 %. In addition, there was a 0.482% decrease in DSSC efficiency based on the storage time which lasted for a period of 6 days.
Effect of Ultrasonic Assisted on The Degree of Deacetylation of Chitosan Extracted from Portunus Pelagicus Buanasari, Buanasari; Sugiyo, Warlan; Rustaman, Heri
Jurnal Bahan Alam Terbarukan Vol 10, No 1 (2021): June 2021 [Nationally Accredited - Sinta 2]
Publisher : Universitas Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15294/jbat.v10i1.27648

Abstract

The technology for extracting chitin from shell and other materials needs to be continuously improved, including its conversion to chitosan. Chitosan is a biocompatible polymer, biodegradable, non-toxic, water-soluble at pH below 6.5, and it has protonated amino groups. The benefits of chitosan in industry, food and medicine make it necessary to fully study an efficient chitosan synthesis method and the results can be applied on an industrial scale. This study examined the effect of ultrasonic-assisted in increasing the degree of deacetylation of chitosan produced from Portunus pelagicus shell waste. The production process of chitosan goes through the stages of deproteination, demineralization and deacetylation. All these steps are ultrasound assisted processes with a frequency of 40 kHz through a digital ultrasonic cleaner. Ultrasonic-assisted chitin and chitosan were examined using FTIR spectrometry. The results showed that the ultrasonic method was able to increase the deacetylation degree of chitin with a value of 68.45±0.11% compared to 62.52±0.08% without ultrasonic. Application of ultrasonic assisted deacetylation gave a deacetylation degree of 85.35 ± 0.20%, higher than without ultrasonic 80.24 ± 0.19%.  Physically, ultrasonic-assisted chitosan is smoother and brighter in color. The ultrasonic-assisted chitosan manufacturing method could increase the deacetylation degree and produce high grade chitosan.
Potential of Waste to Energy Processing for Sustainable Tourism in Nusa Penida Island, Bali Sari, Mega Mutiara; Inoue, Takanobu; Harryes, Regil Kentaurus; Suryawan, I Wayan Koko; Yokota, Kuriko; Notodarmojo, Suprihanto; Priyambada, Ika Bagus; Septiariva, Yenis
Jurnal Bahan Alam Terbarukan Vol 10, No 2 (2021): December 2021 [Nationally Accredited - Sinta 2]
Publisher : Universitas Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15294/jbat.v10i2.33679

Abstract

Solid waste management on Nusa Penida Island is one of the problems in tourism in Bali Province. To deal with this issue, the government has implemented various policies, where the policy that becomes an essential issue is the processing of energy waste. To support this, it is necessary to study the potential of waste characteristics on the island of Nusa Penida. This study aims to analyse the characteristics of waste on the island of Nusa Penida as an energy source based on the generation and composition of waste. Solid waste generation and composition were measured based on land and marine debris data. The total waste generation on land and marine debris can reach 6364.4 kg/day and 762.8 kg/day, respectively. The waste composition materials consist of masks, plastics, metals, and biodegradable organics with a value of 4.12%, 32.77%, 19.54%, and 43.57%, respectively. Therefore, the potential use of organic biodegradable as solid fuel can reach 51,933.8 MJ/day or 14,426 kWh/day. However, in the thermogravimetric analysis (TGA) test, the residue was 18.6%.

Page 22 of 43 | Total Record : 426

 20   21   22   23   24 

Filter by Year

2012 2024


Reset
Filter By Issues
All Issue Vol 13, No 1 (2024): June 2024 [Nationally Accredited Sinta 2] Vol 12, No 2 (2023): December 2023 [Nationally Accredited Sinta 2] Vol 12, No 1 (2023): June 2023 [Nationally Accredited - Sinta 2] Vol 11, No 2 (2022): December 2022 [Nationally Accredited - Sinta 2] Vol 11, No 1 (2022): June 2022 [Nationally Accredited - SINTA 2] Vol 10, No 2 (2021): December 2021 [Nationally Accredited - Sinta 2] Vol 10, No 1 (2021): June 2021 [Nationally Accredited - SINTA 2] Vol 9, No 2 (2020): December 2020 [Nationally Accredited - Sinta 2] Vol 9, No 1 (2020): June 2020 [Nationally Accredited - Sinta 2] Vol 8, No 2 (2019): December 2019 [Nationally Accredited - Sinta 2] Vol 8, No 1 (2019): June 2019 [Nationally Accredited - Sinta 2] Vol 7, No 2 (2018): December 2018 [Nationally Accredited] Vol 7, No 1 (2018): June 2018 [Nationally Accredited] Vol 6, No 2 (2017): December 2017 [Nationally Accredited] Vol 6, No 1 (2017): June 2017 [Nationally Accredited] Vol 6, No 1 (2017): June 2017 [Nationally Accredited] Vol 5, No 2 (2016): December 2016 [Nationally Accredited] Vol 5, No 2 (2016): December 2016 [Nationally Accredited] Vol 5, No 1 (2016): June 2016 [Nationally Accredited] Vol 5, No 1 (2016): June 2016 [Nationally Accredited] Vol 4, No 2 (2015): December 2015 Vol 4, No 2 (2015): December 2015 Vol 4, No 1 (2015): June 2015 Vol 4, No 1 (2015): June 2015 Vol 3, No 2 (2014): December 2014 Vol 3, No 2 (2014): December 2014 Vol 3, No 1 (2014): June 2014 Vol 3, No 1 (2014): June 2014 Vol 2, No 2 (2013): December 2013 Vol 2, No 2 (2013): December 2013 Vol 2, No 1 (2013): June 2013 Vol 2, No 1 (2013): June 2013 Vol 1, No 2 (2012): December 2012 Vol 1, No 2 (2012): December 2012 Vol 1, No 1 (2012): June 2012 Vol 1, No 1 (2012): June 2012 More Issue