Claim Missing Document
Check
Articles

Found 15 Documents
Search

ANALISIS PENERAPAN OTOMATISASI PENIMBANGAN AIR DAN MINYAK TERHADAP EFISIENSI TENAGA KERJA MELALUI PENDEKATAN PDCA DAN RCA Beni Adam; Angga Widyas Swara; Mochamad Eko Nugroho
JOURNAL OF SCIENCE AND SOCIAL RESEARCH Vol. 9 No. 5 (2026): October (2026)
Publisher : Smart Education

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.54314/jssr.v9i5.7207

Abstract

Abstract: This study aims to analyze the implementation of an automated water and oil weighing system in relation to labor efficiency through the Plan Do Check Act (PDCA) and Root Cause Analysis (RCA) approaches in the chilled water and RBD Palm Olein weighing process at PT MYZ Plant Jayanti 1. The research problem originated from a weighing process that was still performed manually, resulting in repetitive work activities, relatively long processing time, and high operator involvement. This study employed a quantitative descriptive method with a case study approach. Data were collected through observation, interviews, documentation, and work-time measurements. RCA was used to identify the root causes of problems based on the Man, Method, and Machine factors, while PDCA was used as a framework for implementing improvement actions through the application of an automated weighing system. The results showed that the initial weighing process required 8.126 minutes per batch, while after automation it decreased to 4.39 minutes per batch, representing a reduction of 3.736 minutes per batch or approximately 46%. Labor requirements changed from 3 operators to 2 operators per shift, representing a reduction of 1 operator or 33.33%. The core weighing activities also decreased from four to three activity elements. Based on the RCA, five root causes were identified with a total frequency of 551 occurrences per shift, consisting of factors related to Method, Man, and Machine. During the evaluation after automation, no weighing discrepancy was found for the materials observed. However, the processing-time target of 3.54 minutes per batch was not fully achieved, as the actual result remained at 4.39 minutes per batch. Therefore, the implementation of automation supported by RCA and PDCA demonstrated changes in processing time, manual activities, and labor requirements based on a comparison of process conditions before and after the implementation of the automated weighing system. Keywords: automation, water and oil weighing, labor efficiency, PDCA, RCA.   Abstrak: Penelitian ini bertujuan untuk menganalisis penerapan sistem otomatisasi penimbangan air dan minyak terhadap efisiensi tenaga kerja melalui pendekatan Plan Do Check Act (PDCA) dan Root Cause Analysis (RCA) pada proses penimbangan air chiller dan minyak RBD Palm Olein di PT MYZ Plant Jayanti 1. Permasalahan penelitian berawal dari proses penimbangan yang masih dilakukan secara manual sehingga menimbulkan aktivitas kerja berulang, waktu proses yang relatif tinggi, serta ketergantungan terhadap keterlibatan operator. Penelitian ini menggunakan metode deskriptif kuantitatif dengan pendekatan studi kasus. Data diperoleh melalui observasi, wawancara, dokumentasi, dan pengukuran waktu kerja. RCA digunakan untuk mengidentifikasi akar penyebab permasalahan berdasarkan faktor Man, Method, dan Machine, sedangkan PDCA digunakan sebagai kerangka pelaksanaan tindakan perbaikan melalui penerapan sistem otomatisasi. Hasil penelitian menunjukkan bahwa kondisi awal proses penimbangan membutuhkan waktu 8,126 menit/batch, sedangkan setelah penerapan otomatisasi menjadi 4,39 menit/batch, sehingga terjadi penurunan waktu proses sebesar 3,736 menit/batch atau sekitar 46%. Kebutuhan tenaga kerja berubah dari 3 orang menjadi 2 orang per shift, atau berkurang sebanyak 1 orang dengan persentase perubahan sebesar 33,33%. Aktivitas inti proses penimbangan juga berkurang dari empat menjadi tiga elemen aktivitas. Berdasarkan RCA, teridentifikasi lima akar penyebab dengan total frekuensi kejadian sebesar 551 kejadian/shift, yang terdiri atas faktor Method, Man, dan Machine. Pada tahap evaluasi setelah otomatisasi, tidak ditemukan selisih hasil penimbangan pada material yang diamati. Namun, target waktu proses sebesar 3,54 menit/batch belum sepenuhnya tercapai karena hasil aktual masih sebesar 4,39 menit/batch. Dengan demikian, penerapan otomatisasi yang didukung RCA dan PDCA menunjukkan adanya perubahan pada waktu proses, aktivitas manual, dan kebutuhan tenaga kerja berdasarkan perbandingan kondisi sebelum dan sesudah penerapan sistem otomatisasi. Kata Kunci: otomatisasi, penimbangan air dan minyak, efisiensi tenaga kerja, PDCA, RCA.
Edukasi Digital Marketing dan Pembayaran Cashless sebagai Upaya Pengembangan UMKM di Desa Pisangan Jaya Mochamad Eko Nugroho; Eka Sahari Arosanto; Yossy Arisandi; Hendro Purnomo; Anto Saryono
Jurnal Pengabdian Masyarakat (ABDIRA) Vol 6, No 1 (2026): Abdira, Januari
Publisher : Universitas Pahlawan Tuanku Tambusai

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31004/abdira.v6i1.1403

Abstract

This community service program, the Community Service Program (KKN), was implemented to address the low digital literacy of MSMEs in Pisangan Jaya Village, RT 02 RW 014, Sepatan District, Tangerang Regency. This lack of understanding of digital marketing, the use of online platforms, and the implementation of cashless payments hinders local MSMEs' growth and market expansion. This activity aims to increase the capacity of MSMEs to utilize digital technology, specifically through digital marketing education, optimization of WhatsApp Business, Google Business Profile, and the use of QRIS-based payment systems. Implementation methods included field observation, coordination with village officials, material development, hands-on application use, and outreach on the theme "Strengthening MSMEs Based on Technology." The results of the activity demonstrated an increased understanding of participants regarding digital promotion strategies, content creation, the convenience of cashless transactions, and the importance of digital financial records. This program helps MSMEs better prepare for competition through the use of modern technology and has a positive impact on local economic development.
Penerapan Metode Define, Measure, Analyze, Improve,Control (DMAIC) Dengan Design Of Experiment (DOE) Untuk Mengurangi Reject Pada Proses Produksi Roma Arden Cokelat Di PT MYR Arif; Mochamad Eko Nugroho; Sita Kurniaty Ratoko
Indonesian Journal of Innovation Science and Knowledge Vol. 3 No. 4 (2026): IJISK 2026
Publisher : Fakultas Pendidikan Ilmu Keguruan, Universitas Pahlawan Tuanku Tambusai

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31004/ijisk.v3i4.764

Abstract

Penelitian ini bertujuan mengurangi reject pada proses produksi Biscuit Roma Arden Cokelat di PT MYR melalui integrasi metode Define, Measure, Analyze, Improve, dan Control (DMAIC) dengan Design of Experiment (DOE). Data diperoleh melalui observasi, wawancara, data historis produksi dan reject, serta eksperimen. Selama Agustus 2025 sampai Januari 2026, produksi mencapai 778.000 unit dengan 9.071 unit reject. Reject cokelat tidak lumer menjadi jenis dominan sebanyak 4.250 unit atau 46,85% dari total reject, dengan baseline reject rate 0,55%. Analisis Pareto dan Fishbone digunakan untuk mengidentifikasi penyebab. DOE Full Factorial 2³ menguji suhu, kecepatan conveyor, dan waktu proses. Kombinasi optimal diperoleh pada suhu 170°C, kecepatan conveyor 20 m/menit, dan waktu proses 10 menit dengan reject rate 0,43%. Hasil tersebut menurunkan reject rate sebesar 21,82% dari baseline. Eksperimen konfirmasi menghasilkan rata-rata reject rate 0,437%. Monitoring Februari sampai Juli 2026 menghasilkan rata-rata reject rate 0,35%, DPMO 3.509,27, dan sigma level 4,20.
Optimasi Tata Letak Gudang Finished Goods Menggunakan Metode Activity Based Classification dan Slotting Strategy Berbasis Frekuensi Permintaan Di PT. Pangan Mulyadi; Sita Kurniaty Ratoko; Mochamad Eko Nugroho
Indonesian Journal of Innovation Science and Knowledge Vol. 3 No. 4 (2026): IJISK 2026
Publisher : Fakultas Pendidikan Ilmu Keguruan, Universitas Pahlawan Tuanku Tambusai

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31004/ijisk.v3i4.771

Abstract

Penelitian ini bertujuan mengoptimalkan tata letak gudang finished goods di PT. Pangan melalui metode Activity Based Classification dan Slotting Strategy berbasis frekuensi permintaan. Masalah penelitian terletak pada penempatan produk yang belum sepenuhnya mempertimbangkan tingkat permintaan, frekuensi picking, dan jarak racking terhadap loading dock. Data yang dianalisis mencakup delapan produk, dengan periode Juli-Desember 2025 sebagai kondisi before dan Januari-Juni 2026 sebagai kondisi after. Activity Based Classification digunakan untuk mengelompokkan produk berdasarkan kontribusi total permintaan, sedangkan Slotting Strategy digunakan untuk menentukan penempatan produk berdasarkan kelas, frekuensi picking, dan jarak racking. Hasil klasifikasi menunjukkan lima produk berada pada kelas A dengan kontribusi 79,33%, dua produk pada kelas B sebesar 14,42%, dan satu produk pada kelas C sebesar 6,25%. Simulasi dengan frekuensi picking yang sama menurunkan jarak tempuh dari 3.138 menjadi 1.484 meter per bulan, atau efisiensi 52,71%. Perbandingan aktual before dan after menunjukkan jarak turun menjadi 1.662 meter per bulan, dengan pengurangan 1.476 meter atau 47,04%. Hasil tersebut menunjukkan bahwa penempatan berbasis aktivitas dapat mengurangi jarak picking tanpa mengubah struktur racking.
Implementation of the DMAIC (Define, Measure, Analyze, Improve, Control), FTA (Fault Tree Analysis), and Poka-Yoke (Error-Proofing) Methods to Reduce Codification Defects in Gift Box Packaging at PT ASD Rakay Edhiargo Toyosito; Mochamad Eko Nugroho; Refo Aditya
Jurnal Ilmiah Multidisiplin Indonesia (JIM-ID) Vol. 5 No. 09 (2026): Jurnal Ilmiah Multidisplin Indonesia (JIM-ID), September 2026
Publisher : Sean Institute

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

The Gift Box packaging line at PT ASD experienced recurring codification defects, particularly Missing Code defects, which affected product traceability and process reliability. Historical quality control data showed that Missing Code was the dominant defect, accounting for 426,096 units or 92.7% of the recorded codification defects. This study aims to reduce codification defects on the Gift Box packaging line through the integrated implementation of DMAIC (Define, Measure, Analyze, Improve, Control), Fault Tree Analysis (FTA), and Poka-Yoke. The research followed the DMAIC framework, with the Measure phase evaluating process capability using DPMO and Sigma Level, the Analyze phase identifying root causes through Fishbone Diagram and FTA, and the Improve phase implementing Poka-Yoke-based corrective actions. The identified root causes included product accumulation at the guide rail, improper WIP input, uniform conveyor speed settings, and photoelectric sensor misalignment. The improvement actions consisted of installing a Guide Roll, applying a transparent acrylic cover, adjusting the conveyor speed ratio from 1:1:1 to 1:1.5:2, relocating the sensor, and implementing a timer-based automatic rejector. The results showed that the initial process capability was 77,296.44 DPMO with a Sigma Level of 2.93. Following the implementation of the improvements, the DPMO decreased to 257.20 and the Sigma Level increased to 4.98 based on post-improvement data collected from March to May 2026. The findings indicate that the integration of DMAIC, FTA, and Poka-Yoke improved the stability of the Gift Box coding process by addressing root causes and reducing reliance on manual error detection.