Claim Missing Document
Check
Articles

Found 24 Documents
Search

INTEGRATION OF SOLAR PANELS AND ARDUINO FOR AQUAPONIC SYSTEM AUTOMATION AND SOLAR ENERGY EFFICIENCY Lubis, Lailatul Husna; Mesyadi, Mesyadi; Nasution, Mulkan Iskandar
Indonesian Physical Review Vol. 8 No. 1 (2025)
Publisher : Universitas Mataram

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29303/ipr.v8i1.415

Abstract

Aquaponics is a system that combines fish and plant farming in one mutually beneficial ecosystem. However, the consumption of electrical energy, such as driving water pumps in aquaponic systems, is crucial because it requires considerable financing. Solar panels are one of the alternatives in reducing the use of electrical energy. Solar energy is environmentally friendly and does not produce pollution like conventional energy. Thus, automation and using solar energy as renewable energy can be a solution to improving the efficiency of aquaponic systems. This research aims to analyze the Arduino-based automation system and the use of 200 Wp solar panels in aquaponics involving catfish and water spinach cultivation. The system uses solar panels as the primary energy source stored in VRLA batteries, regulated through a Solar Charge Controller, and converted into AC electricity to operate the water pump and automatic monitoring system. Arduino Uno controls the automation and monitoring with pH, TDS, temperature, humidity, and ultrasonic sensors to monitor environmental conditions. Tests show that the solar panel produces an average voltage of 40.83 V and a current of 3.28 A, with an efficiency of 40.65% and a power that can be generated in a day of 1200 Watts. The operational cost of the solar panel system was calculated using the Levelized Cost of Energy (LCOE), showing that it is more efficient than PLN electricity at Rp 688.15/kWh vs. Rp 1,444.70/kWh or Rp 31,397.3 vs. Rp 65,947.35 for one year of aquaponic system use. Monitoring for 10 days showed optimal growth of water spinach and catfish plants with consistent pH, temperature, humidity, and pump and servo operation. The results indicate that an aquaponics system powered by renewable energy and Arduino-based automation effectively meets energy needs at a lower cost and improves the efficiency and reliability of aquaponics operations.
Design and Construction of Mice Detection and Removal Equipment in the House Based on the Internet of Things (IoT) Lubis, Zakia; Nasution, Mulkan Iskandar; Nasution, Nazaruddin
Jurnal Pijar Mipa Vol. 19 No. 3 (2024): May 2024
Publisher : Department of Mathematics and Science Education, Faculty of Teacher Training and Education, University of Mataram. Jurnal Pijar MIPA colaborates with Perkumpulan Pendidik IPA Indonesia Wilayah Nusa Tenggara Barat

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29303/jpm.v19i3.6771

Abstract

Rats are rodents that have a negative impact on society, both in agriculture and industry. Rodents roaming around in the house can damage electrical connections, which can trigger fires and cause fires, as well as causing economic losses. This research used a PIR sensor to detect movement and an ESP32 cam to stream live video on the blynk application. Box two contains a series of ultrasonic sound generators emitted through speakers. Additionally, tool tests were carried out using a 12 V battery test, PIR sensor test, relay test, ESP32 Cam, ultrasonic generator PWM test, Blynk test, and tool test on mice. This research aims to design a device for detecting and repelling mice in homes based on the Internet of Things (IoT). The design of this tool uses an ESP32   microcontroller as the main controller. This tool also has components such as an ESP32   cam, relay, ultrasonic speaker, 3.7-volt battery, PIR sensor, servo motor, and ultrasonic sound generator module. This tool has a working system in the form of a PIR sensor that detects mouse movement. Then the ultrasonic sound automatically comes on, the servo motor moves and the ESP32   cam connected to the Blynk application will stream live video. This tool also has an on and off button system via the blynk application. The test results carried out by the PIR sensor were able to detect the presence of objects at a distance of 5 m. The frequency issued by the ultrasonic module and measurements made via an oscilloscope has an average percent error of 1,02%. This proves that the performance of the designed prototype tool works well. The results of tests to repel mice using ultrasonic sound, which could disturb the mice, were at 40-50 kHz. The overall test results for the home IoT-based mouse detection and repellent system worked well.
Design and Construction of an Automatic Chili Plants Watering System Based on the Internet of Things (IoT) Using the Blynk App Aisyah, Siti; Nasution, Mulkan Iskandar; Nasution, Nazaruddin
Jurnal Pijar Mipa Vol. 19 No. 3 (2024): May 2024
Publisher : Department of Mathematics and Science Education, Faculty of Teacher Training and Education, University of Mataram. Jurnal Pijar MIPA colaborates with Perkumpulan Pendidik IPA Indonesia Wilayah Nusa Tenggara Barat

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29303/jpm.v19i3.6772

Abstract

Chili is one of the vegetables cultivated by Indonesian farmers because of its high market value and many health benefits. Manual watering of plants still has weaknesses because water use is unlimited, especially for chili plants. Therefore, IoT is needed to water plants automatically and in real-time based on soil moisture and can monitor chilli plants' air temperature and pH. This research aims to replace manual watering with automatic watering. The system was tested and installed in a greenhouse using UV plastic measuring 70cm × 70cm × 70cm. The microcontroller used is ESP32. Other components are RTC DS3231, capacitive soil moisture sensor, DHT22 sensor, soil pH sensor, water pump, and blynk application. This device operates when reading input from the RTC, namely 07:00 WIB and 17:00 WIB. The watering pump will work at humidity <60% and stop at humidity >80%. At temperatures <24˚C, the lamp will be active and at temperatures >33˚C to <55˚C, condensation will be carried out using a nozzle sprayer. The soil pH sensor detects soil conditions, namely acidic, neutral or alkaline. The results of this research are quite good and follow the designed program. The average % error on the DHT22 sensor is 1.433%, and the soil pH sensor is 0.74%. Capacitive soil moisture sensors are also quite good at reading soil moisture conditions. Likewise, the RTC test has a time difference of only 6 seconds with the comparison tool.
PROTOTYPE KOTAK AMAL MASJID DENGAN VOICE RECOGNITION DAN GPS BERBASIS INTERNET OF THINGS Azizah, Ainun; Masthura, Masthura; Nasution, Mulkan Iskandar
CHEDS: Journal of Chemistry, Education, and Science Vol 8, No 1 (2024)
Publisher : Universitas Islam Sumatera Utara

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30743/cheds.v8i1.8996

Abstract

Telah dilakukan perancangan dan pembangunan sistem keamanan kotak amal masjid yang bertujuan untuk menciptakan suatu alat yang dapat mendeteksi pencurian kotak amal masjid berbasis Internet of Things. Alat ini menggunakan dua mikrokontroler yaitu ATmega328P dan ESP-32. Selain itu alat ini juga dilengkapi dengan sensor ultrasonik HC-SR04, modul GPS, dan pengenalan suara. Hasil pengujian dari GPS pada kotak amal masjid diperoleh titik Latitude dan Longitude masing-masing sebesar 3.492006 dan 98.587856, sedangkan titik koordinat pada Google Maps sebesar 3.491760 dan 98.587943, hal ini membuktikan bahwa Modul GPS Neo-6M yang digunakan cukup akurat dengan perbedaan jarak sekitar 3 m. Fungsi dari sensor ultrasonik HC-SR04 adalah untuk mendeteksi pergerakan di dalam kotak amal, kemudian sistem alarm peringatan dini atau buzzer akan berbunyi dan Wi-Fi akan mengirimkan notifikasi koordinat ke aplikasi telegram. Alat ini juga dilengkapi dengan sistem buka tutup kotak amal yang cukup modern yang menggunakan modul Voice Recognition, dimana modul ini dapat merekam, mengenali dan mendeteksi suara dengan tepat.
Rancang Bangun Sistem Monitoring pada Tanaman Greenhouse Berbasis Internet of Things (IOT) Regita, Nazifah Dilla; Nasution, Mulkan Iskandar; Nasution, Nazaruddin
VISA: Journal of Vision and Ideas Vol. 4 No. 3 (2024): VISA: Journal of Vision and Ideas
Publisher : IAI Nasional Laa Roiba Bogor

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.47467/visa.v4i3.2372

Abstract

A greenhouse is a structure where plants are grown using agricultural techniques in an environment where the climate can be managed. The aim of research on a prototype smart greenhouse monitoring system based on the internet of things (IoT) is to create a tool that makes it easier for farmers to monitor plants without having to physically visit the greenhouse. Power supply, ESP32, soil pH sensor, capacitive soil moisture sensor, DHT22 sensor, HC-SR04 ultrasonic sensor, relay, LCD, and water pump are some of the electronic components used in this smart greenhouse system. By using sensor data and microcontroller commands to read soil pH, soil moisture, water availability, temperature and air humidity, the Smart Greenhouse Monitoring System was successfully operated. For example, the soil humidity sensor measures soil humidity if <40% the water pump will turn on. The room temperature and humidity sensor measures if the temperature is >33 °C and the room humidity is <40% then the water pump will turn on. The Ultrasonic Sensor detects the level of water availability with a limit of <10cm and will provide a notification as a warning that the water supply will run out. To manage the smart greenhouse output devices and display data on the LCD and Blynk, logic operators are used to process all data received from the devices.
Penerapan Barrier Buatan Untuk Mereduksi Tingkat Kebisingan Jalan Raya Pada Kawasan Pemukiman di Jalan Halat Kota Medan Chairani, Cici; Nasution, Mulkan Iskandar; Daulay, Zubair Aman
Jurnal Fisika Unand Vol 12 No 1 (2023)
Publisher : Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/jfu.12.1.108-114.2023

Abstract

Meningkatnya jumlah penduduk dan sarana transportasi dalam aktivitas mobilitas dapat menimbulkan dampak kebisingan. Kebisingan adalah sumber bising paling utama. Kebisingan pada sekarang terutama di perkotaan memiliki dampak kebisingan yang tidak disadari dapat menimbulkan dampak buruk bagi kesehatan dan kenyamanan lingkungan. Telah dilakukan penelitian tingkat kebisingan di Jalan Halat Kota Medan. Tujuan penelitian ini untuk mengetahui tingkat kebisingan, pola sebaran kebisingan, dan penerapan barrier buatan. Metode pengukuran yang digunakan mengacu pada Surat Keputusan Menteri Lingkungan Hidup No.48/MENLH/11/1996. Alat yang digunakan untuk pengukuran kebisingan adalah Sound Level Meter tipe TL 200. Untuk pemetaan dengan menggunakan Software Surfer Golden Versi 20. Penelitian ini memiliki 32 titik yang terdiri dari 8 titik pada pembatas jalan dan 24 titik pada pemukiman penduduk. Untuk mereduksi kebisingan menggunakan barrier buatan dari bahan triplek. Dari hasil penelitian, diperoleh tingkat kebisingan tertinggi sebesar 76,2 dBA dan tingkat kebisingan terendah sebesar 59,5 dBA. Jalan Halat Kota Medan memiliki nilai kebisingan yang melebihi standar baku mutu 55 dBA.
Pemanfaatan Pelepah Pisang Sebagai Treatment Akustik Pada Ruang Masjid Al Ikhlas Jalan Timor Medan Wahyuni, Sri; Nasution, Mulkan Iskandar; Daulay, Zubair Aman
Jurnal Fisika Unand Vol 12 No 1 (2023)
Publisher : Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/jfu.12.1.101-107.2023

Abstract

Penelitian ini dilakukan untuk mengetahui pengaruh treatment akustik terhadap kenyamanan pada ruang Masjid dengan menggunakan pelepah pisang (α = 0,71). Kemudian menempatkan sampel pelepah pisang berukuran 25 x 25 x 2 cm pada dinding Masjid untuk mengukur tingkat tekanan bunyi dan waktu dengung menggunakan alat ukur sound level meter. Nilai tingkat tekanan bunyi turun dari 71,2 dB menjadi 55 dB, nilai waktu dengung dengan menggunakan metode sabine dan percobaan berturut-turut turun dari 1,89 s menjadi 1,5 s dan dari 1,78 s menjadi 1,56 s. Pelepah pisang memiliki pengaruh yang baik untuk dijadikan  bahan treatment akustik ruang karena memiliki daya serap dan daya simpan yang baik dalam kondisi kering. 
Sistem Otomatisasi Jemuran Pakaian dengan Sensor Hujan dan Sensor LDR Berbasis Arduino Uno Nasution, Nazaruddin; Marpaung, Diva Moniva; Nasution, Mulkan Iskandar
Jurnal Fisika Unand Vol 12 No 1 (2023)
Publisher : Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/jfu.12.1.124-130.2023

Abstract

Pemanasan global saat ini telah menyebabkan cuaca menjadi kurang menentu, sehingga musim kemarau dan hujan tidak lagi dapat diprediksi. Kondisi cuaca yang tidak menentu dapat mempersulit proses pengeringan pakaian. Oleh karena itu, perlu dirancang sistem otomatisasi penjemuran pakaian berbasis mikrokontroler arduino uno yang menggunakan sensor hujan dan sensor LDR. Penelitian ini bertujuan untuk mengembangkan alat kinerja yang akan menggunakan sistem otomatis untuk mendeteksi apakah ada ada hujan, tidak ada cahaya atau cuaca dalam keadaan mendung. Sistem otomatis berupa jemuran yang menggunakan motor stepper yang akan menarik tali jemuran masuk atau keluar dan pemberitahuan dari DFPlayer Mini. Desain pendeteksian cahaya hujan memiliki 4 status: hujan – siang, cerah – malam, cerah – siang, dan hujan – malam. Dalam setiap kasus, motor stepper menarik tali jemuran masuk atau keluar. Hasil dari penelitian ini menunjukkan bahwa sistem otomatisasi dapat mendeteksi besar curah hujan yaitu 0,1 mm – 817 mm, dan besar intensitas cahaya yaitu 5 Lux – 506 Lux.
Pemanfaatan Bahan Kardus Sebagai Material Penyerap Suara Pada Studi Kenyamanan Akustik Ruang Alvionita, Fitri; Nasution, Mulkan Iskandar; Daulay, Zubair Aman
Jurnal Fisika Unand Vol 12 No 2 (2023)
Publisher : Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/jfu.12.2.334-340.2023

Abstract

Telah dilakukan penelitian kenyamanan akustik yang dilakukan pada ruang kelas dengan memanfaatkan limbah sebagai bahan untuk membuat material akustik. Pada penelitian ini bahan yang digunakan adalah berasal dari limbah kardus yang sudah tidak terpakai sehingga selain untuk memperbaiki kualitas akustik pada ruangan, penggunaan kardus sebagai bahan peredam juga dapat mengurangi limbah pada lingkungan. Pada penelitian ini diperoleh hasil koefisien serap bahan dari limbah kardus adalah 0,57 dengan intensitas bunyi 90 dB dan variasi frekuensi 125 Hz, 250 Hz, 500 Hz, 1KHz, 2 KHz, dan 4 KHz. Dengan hasil koefisien serap sebesar 0,57 dapat memperbaiki tingkat kualitas akustik pada ruangan. Hal ini dilihat dari data hasil pengukuran 3 aspek kebisingan yaitu bising latar belakang, tingkat tekanan bunyi dan waktu dengung pada ruangan yang mengalami penurunan nilai kebisingan setelah dilakukan pemasangan material akustik pada dinding ruangan, sehingga kualitas akustik pada ruang kelas dapat dikatakan nyaman dan sesuai dengan standar SNI.
Sistem Penyortir Otomatis Kematangan Tomat Berdasarkan Warna dan Berat dengan Sensor Tcs3200 dan Sensor Load Cell Hx711 Berbasis Arduino UNO Anggreani, Dewi; Nasution, Mulkan Iskandar; Nasution, Nazaruddin
Jurnal Fisika Unand Vol 12 No 3 (2023)
Publisher : Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/jfu.12.3.373-379.2023

Abstract

Tomat merupakan salah satu tanaman populer yang banyak digunakan dalam produksi makanan dan minuman. Untuk mendapatkan tomat dengan kualitas yang baik maka dilakukan proses penyortiran pasca panen. Pada era tekmologi seperti sekarang masih banyak petani yang melakukan penyortiran secara manual. Untuk mendukung petani dalam memaksimalkan hasil panen maka dirancang sebuah penyortir otomatis tomat berbasis arduino uno. Sistem kerja alat ini berupa mesin sortasi otomatis yang dapat menyortir tomat berdasarkan warna kulit dan berat dengan sensor TCS3200 dan sensor load cell. Sistem ini dirancang untuk menyortir tomat dengan 6 keadaan, yaitu tomat matang berat, tomat matang ringan, tomat setengah matang berat, tomat setengah matang ringan, tomat mentah berat, tomat mentah ringan. Untuk setiap keadaan, salah satu dari 5 motor servo akan aktif untuk mendorong tomat ke wadah penampungan. Hasil pembacaan dari sensor TCS3200 berupa nilai RGB, dan hasil pembacaan dari sensor load cell diperoleh deviasi rata-rata sebesar 0,32%.