Claim Missing Document
Check
Articles

Found 27 Documents
Search

Sistem Elektro Pneumatik Modul PLC 3 Silinder Kerja Ganda Gerak Berlawanan Ari Kurniawan; Hilda Porawati
Jurnal INOVATOR Vol. 3 No. 1 (2020): Jurnal INOVATOR
Publisher : LPPM Politeknik Jambi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.37338/inovator.v3i1.131

Abstract

In the industrial application, the pneumatik system was used to help the production process that uses automatic control. The pneumatik system trainer that already exists in the Politeknik Jambi workshop still uses a manual control system. In this discussion, the writer wants to modify the PLC-based electro-pneumatik policy (programmer logic controller). Pneumatik systems were all systems that use power in the form of compressed air and are used to produce work. The first compressed air by the compressor and stored in the storage tube. The storage air was treated so that the pneumatik system can function correctly. The compressed air was regulated for use by a pneumatik control system, which is connected to the solenoid valve to drive three cylinders of double-acting opposite motion..
Rancang Bangun Alat Peraga Sistem Pneumatik dan Pengujian Dua Silinder Kerja Ganda Bergerak Bersamaan Secara Terus-Menerus Ari Kurniawan; Hilda Porawati; Siti Aminah
Jurnal INOVATOR Vol. 4 No. 2 (2021): Jurnal INOVATOR
Publisher : LPPM Politeknik Jambi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.37338/inovator.v4i2.143

Abstract

Teaching aids are tools used to teach and help explain the material. The teaching aids that the author makes are pneumatic system props and testing of two double acting cylinders moving simultaneously continuously. This teaching aid is made through the design stage. This teaching aid was made to serve as a learning practicum tool in the Jambi Polytechnic workshop and to conduct testing. In the final project report, the author made a pneumatic system that has the actuator motion automatically. Thus the components used to make the actuator move automatically, namely 4 manifold ports, 1 3/2 pushbutton valve, 2 3/2 roller valves, 1 5/2 double pilot valve where the air flow will be branched using a T fitting to each each cylinder, namely cylinder 1 and cylinder 2. This teaching aid has a length of 80 cm, a width of 80 cm and a height of 150 cm. All pneumatic components are mounted on pneumatic sliding boards by connecting them with pneumatic rails.
Mesin Pengiris Tempe Semi Otomatis Jenis Disc Cutter Vertical Hilda Porawati; Ari Kurniawan
Jurnal INOVATOR Vol. 4 No. 2 (2021): Jurnal INOVATOR
Publisher : LPPM Politeknik Jambi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.37338/inovator.v4i2.147

Abstract

Rempeyek Ilham is one of the Micro, Small and Medium Enterprises (MSMEs) in Jambi City which is engaged in the production of tempeh peanut brittle. The increase in the capacity of the tempeh slices is done by making an automatic tempeh slicing machine using a vertical disc cutter. The slicing method is to use a crankshaft mechanism which produces a reciprocating motion with a 2-way movement direction, namely the transfersal direction and the longitudinal direction. The thickness of the wedge is regulated by a stopper with the help of a spring push mechanism. The results showed that the tempe cutting machine with a cutting time of 1 minute 37 seconds, the average number of slices obtained with a size of 2 mm was 83.8 slices and for sizes above 2 mm (2.1 mm-3 mm) as many as 68 slices, and the rest of the tempeh pieces are 5.6 cm long.
Rancang Bangun Alat Pencetak Rempeyek Bulat Diameter 90mm Hilda Porawati; Ahmad Imam Rifa’i; Gentur Pressa Reforandika; Fahrur Razi Ramadhan
Jurnal INOVATOR Vol. 5 No. 1 (2022): Jurnal INOVATOR
Publisher : LPPM Politeknik Jambi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.37338/inovator.v5i1.149

Abstract

The peanut brittle product is very popular with the public so that many processors produce it, which are sold in various places, ranging from traditional markets to modern markets. The application of appropriate technology to increase production capacity is very much needed by Micro, Small and Medium Enterprises (MSMEs). In this research, the design of the peanut brittle fryer has been made using a round mold which has 10 peanut brittle molds with a spring lever system that is operated manually. The results showed that the frying pan had a diameter of 90 mm and a mold thickness of 2 mm and totaled 10 pieces in one frying process. The use of stainless material in the mold causes the dough to stick at the peanut frying stage.
Rancang Bangun Alat Pemotong Stiker Hilda Porawati; Ari Kurniawan; Alex Yohannes Pasaribu
Jurnal INOVATOR Vol. 6 No. 2 (2023): Jurnal INOVATOR
Publisher : LPPM Politeknik Jambi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.37338/inovator.v6i2.258

Abstract

Mesin pemotong stiker untuk usaha mikro kecil menengah rempeyek adalah suatu mesin yang berfungsi untuk memotong stiker khusus untuk label produk yang ditempel ke pembungkus plastik. Dalam pemotongan stiker. Di usaha UMKM masih menggunakan jasa pihak luar ataupun memotong sendiri secara manual, salah satunya usaha UMKM di kota jambi. Dalam pemotongan stiker label pengerjaan masih secara manual sehingga memerlukan tenaga kerja yang cukup besar dan waktu yang cukup lama. Maka dari itu, dibuat Mesin Pemotong stiker dengan kapasitas 150 lembar dengan penggerak motor listrik single phase induction motor, disuplai oleh tenaga listrik 220V\50Hz kecepatan putaran 1400 rpm. Alat ini dapat memotong kertas stiker dengan cepat dan hasil potongan presisi dan rapi. Mesin pemotong stiker label ini bertujuan untuk mempermudah pemotongan stiker label, dan agar masyarakat kecil dapat menggunakan mesin pemotong stiker label dengan harga mesin yang lebih ringan. Untuk memperpanjang masa ketahanan dan keawetan mesin, dapat di lakukan perawatan, perbaikan dan kebersihan mesin. Adapun sistem mata pisau potong dari mesin pemotong stiker label ini adalah mengunakan sistem mata pisau dengan gerakan naik turun.
Upgrade Kerangka Dan Mekanisme Penggerak Pada Mesin Pembelah Pinang Kurniawan , Ari; Porawati, Hilda; Iqbal, Muhammad Sazali
Jurnal INOVATOR Vol. 7 No. 1 (2024): Jurnal INOVATOR
Publisher : LPPM Politeknik Jambi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.37338/inovator.v7i1.299

Abstract

Politeknik Jambi pada tahun 2023 telah membuat satu unit mesin pembelah buah pinang. Hasil dari evaluasi terhadap alat dan laporan rancang bangun mesin pembelah pinang tersebut, bahwa alat ini masih memiliki memiliki banyak kekurangan dan persentase keberhasilan pembelahan buah hanya mencapai 55,68%. Pada proyek akhir ini berjutuan untuk mengoptimalkan lagi hasil belah buah pinang, sehingga dilakukan upgrade pada mesin pembelah pinang tersebut. Upgrade yang dilakukan oleh penulis yaitu pada kerangka dan mekanisme penggerak mesin pembelah pinang untuk menyesuaikan mekanisme pembelahan. Setelah melakukan upgrade dan uji coba mesin pembelah pinang, didapat persentase pembelahan mesin mencapai 83,8%. Hal ini membuktikan mesin pembelah pinang telah memenuhi target.
Optimization of the Lapis Angso Duo Micro Enterprise throughProduction and Marketing Technology: Optimalisasi Usaha Mikro Lapis Angso Duo melalui Teknologi Produksi dan Pemasaran Porawati, Hilda; Mazwan, Mazwan; Utama, Satrio Darma; Handoko, Dedi; Candra, Andel Hopi
Dinamisia : Jurnal Pengabdian Kepada Masyarakat Vol. 9 No. 3 (2025): Dinamisia: Jurnal Pengabdian Kepada Masyarakat
Publisher : Universitas Lancang Kuning

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31849/5sgh6y32

Abstract

Artikel ini membahas implementasi pelatihan pemasaran, pelatihan teknologi produksi, dan serah terima peralatan untuk meningkatkan produktivitas dan daya saing usaha mikro Lapis Angso Duo. Kegiatan pelatihan pemasaran bertujuan untuk meningkatkan pemahaman peserta mengenai strategi pemasaran digital dan pengelolaan hubungan pelanggan, yang dapat memperluas jangkauan pasar dan meningkatkan loyalitas pelanggan. Pelatihan teknologi produksi difokuskan pada penggunaan mesin pengaduk adonan, oven, dan rak proofing, yang bertujuan untuk meningkatkan efisiensi operasional dan konsistensi kualitas produk. Serah terima peralatan dilakukan dengan pengujian kelayakan dan pelatihan teknis untuk memastikan pengoperasian yang optimal. Hasil dari kegiatan ini menunjukkan peningkatan signifikan dalam kapasitas produksi, efisiensi waktu, kualitas produk, serta kemampuan pemasaran digital yang lebih baik, memberikan dasar yang kuat bagi Lapis Angso Duo untuk berkembang dan bersaing di pasar. Kegiatan ini diharapkan menjadi model bagi UMKM lainnya dalam memanfaatkan teknologi dan pemasaran digital untuk mendukung keberlanjutan bisnis.