Claim Missing Document
Check
Articles

Found 29 Documents
Search

Analysis of the Use of Telkomsel and Indosat Providers on the ITP Campus to Improve Internet Signal Quality for Students Rifqa Durriyatil Ilmi; Sitti Amalia; Andi Syofian
Journal of Education Technology Information Social Sciences and Health Vol 3, No 2 (2024): September 2024
Publisher : CV. Rayyan Dwi Bharata

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.57235/jetish.v3i2.3188

Abstract

Walktest is a direct signal quality measurement activity which aims to collect signal parameter data for an operator in a certain area. Usually the walk test is carried out indoors by walking around the area to be measured carrying a walk test device that is equipped with supporting software. Walktest data collection was carried out in several buildings on the ITP campus, namely buildings A, B, C, D, E, and F, where each building consists of 2 floors and 3 floors and the operator whose data will be taken is only for 4G networks, especially Indosat and Telkomsel operators. The parameters to be measured are PCI (Physical Cell Identity) parameters, RSRP (Referenced Signal Receive Power) parameters, RSRQ (Reference Signal Receive Quality) and SINR (Signal to Interference Noise Ratio) parameters. From the results of this walktest, we can find out what the signal quality is in the building and the factors that cause differences in signal quality in the building.
RANCANG BANGUN MESIN WRAPING SEPATU OTOMATIS MENGGUNAKAN MIKROKONTROLLER Andi Syofian; Yultrisna Yultrisna
Ensiklopedia of Journal Vol 8, No 11 (2026): Vol. 8 No. 11 Agustus 2026
Publisher : Ensiklopedia of Journal

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33559/eoj.v8i11.3931

Abstract

In industrial work, it is not always the place where the ongoing work is always in a dirty state, sometimes there are several industrial companies that demand cleanliness in production activities or in work activities both cleaning the surrounding environment and cleaning of the workers themselves. The automatic shoe wrapping machine is here to meet these needs where this machine has a function to cover the surface of the shoe sole to the top by using plastic. Because shoes are a sure source it can cause the environment around the work to become dirty, especially on the floor surface and it can also happen on machines that operate using feet. Keywords: wrapping machine, Microcontroller, Fan, Heating Element, Ultrasonic Sensor
Smart Protection pada Prototipe Gedung Asuransi Astra Berbasis Mikrokontroler Putra Irfanda Masta; Zulkarnaini Zulkarnaini; Andi Syofian; Yusreni Warmi; Arfita Yuana Dewi
TSAQOFAH Vol 5 No 3 (2025): TSAQOFAH: Jurnal Penelitian Guru Indonesia
Publisher : Lembaga Yasin AlSys

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58578/tsaqofah.v5i3.5606

Abstract

The development of technology is carried out to support human needs to be more practical in life, one of which is in the field of security. Based on data obtained from the Central Statistics Agency regarding criminal statistics, theft is the most commonly occurring crime in Indonesia. This underpins this research, which aims to develop a building security system by utilizing several components, such as RFID sensors (Radio Frequency Identification), magnetic sensors, NodeMCU microcontroller, buzzer, and the Blynk application on mobile phones to control and receive notifications from the device. The creation of this tool is intended to maximize the use of the Blynk application on mobile phones and synergize with the NodeMCU microcontroller, thus creating a useful, creative, and innovative device. The result of this research is the creation of an intelligent system in the form of building security through a mobile application, which can control and provide warning notifications when the sensor detects unauthorized persons entering the building.
Studi Analisa Pengaruh Desain Kumparan 9-Fasa Simetris Dengan Sistem Desain-3 Lapis dan Kutub Berurutan Terhadap Torsi dan Kecepatan Motor Induksi 3-Fasa Rasyid N Sidiq; Erhaneli Erhaneli; Zuriman Anthony; Andi Syofian; Sitti Amalia
Journal of Accounting Law Communication and Technology Vol. 2 No. 1 (2025): Januari 2025
Publisher : CV. Rayyan Dwi Bharata

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.57235/jalakotek.v2i1.4833

Abstract

Penelitian ini untuk mengkaji pengaruh desain kumparan 9-fasa simetris dengan  menggunakan sistem desain 3 lapis kumparan pada motor induksi 3-fasa terhadap torsi dan kecepatan motor, dilakukan dengan tujuan untuk membandingkan kinerja motor konvesional 3 fasa dengan motor desain kumparan 9-Fasa. Untuk Mengetahui dan menganalisa pengaruh desain kumparan 9 fasa simetris terhadap torsi dan kecepatan motor induksi 3 fasa dengan menggunakan sistem desain 3 lapis kutup dibuat secara berurutan. Menentukan kumparan yang ditempatkan dan dirancang dalam motor kumparan 9 fasa simetris dengan 3 lapis, serta mengatur kutub dalam urutan tertentu. Perancangan ini penting karena mempengaruhi kumparan pada medan magnet dan arus yang dihasilkan. Motor diuji di laboratorium dengan mengukur torsi, kecepatan, dan efisiensi di berbagai kondisi operasi. Uji eksperimental dilakukan untuk membandingkan hasil simulasi dengan kinerja motor aktual. Data pengujian mencakup pengukuran torsi dan kecepatan dari hasil penelitian ini didapatkan hasil data torsi dan kecepatan yang tidak sama untuk percobaan kedua motor.
Studi Analisa Pengaruh Kumparan Desain 9 Fasa Simetris Terhadap Efisiensi Motor Induksi 3 Fasa Dengan Desain 3 Lapis dan Desain Kutup Dibuat Secara Berurutan Jimmy Al Kito Lufti; Zuriman Anthony; Zulkarnaini Zulkarnaini; Andi Syofian; Yusreni Warmi
Journal of Accounting Law Communication and Technology Vol. 2 No. 1 (2025): Januari 2025
Publisher : CV. Rayyan Dwi Bharata

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.57235/jalakotek.v2i1.4914

Abstract

Penelitian ini bertujuan untuk mengetahui bagaimana pengaruh desain kumparan 9 fasa terhadap efisiensi motor berdasarkan desain kumparan 3 fasa simetris. Karena motor ini menggunakan daya tiga fasa, maka diharapkan akan tercipta motor induksi tiga fasa baru yang memiliki kinerja  lebih baik tanpa mengeluarkan biaya tambahan yang mahal untuk mengoperasikan motor tersebut. Penelitian dimulai dengan mendata motor induksi yang digunakan. Motor induksi M1 dan M2 dilakukan pengujian atau uji coba untuk diambil data awal berupa arus, tegangan, faktor daya, efisiensi, torsi dan kecepatan. Kemudian lilitan motor diubah dengan desain 9-fasa sistem tiga lapis simetris kemudian menghubungkan kumparan seolah-olah bekerja dengan sistem 3-fasa. Analisa hasil perbandingan M1 dan M2 yaitu efisiensi dan kecepatan. Kecepatan motor induksi 3-fasa Konvesional lebih cepat dibandingkan motor induksi 3-fasa 9-fasa simetris terhadap efesiensi motor induksi 3-fasa desain 9-fasa dikarenakan efesiensi lebih besar dari motor induksi Konvesional. Hal ini dikarenakan motor induksi 3-fasa desain –fasa simetris terhadap efesiensi motor induksi 3-fasa dengan sistem 3 lapis kumparan 3 fasa.
Studi Analisis Pengaruh Desain 9-Fasa Simetris Terhadap Efisiensi Motor Induksi 3-Fasa Dengan Sistem 3 Lapis Kumparan 3-Fasa Falmi Ade Saputra; Zulkarnaini Zulkarnaini; Zuriman Anthony; Yusreni Warmi; Andi Syofian
Journal of Humanities Education Management Accounting and Transportation Vol. 2 No. 1 (2025): Februari 2025
Publisher : CV. Rayyan Dwi Bharata

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.57235/hemat.v2i1.5070

Abstract

Tujuan dari penelitia ini adalah untuk mengetahui pengaruh belitan 9 fasa terhadap efesiensi motor induksi berdasarkan desain semetris 3 fasa. Dengan menggunakan sumber 3 fasa, dengan tujuan terciptannya motor induksi 3 fasa baru yang performanya lebih baik tanpa memerlukan biaya tambahan yang mahal untuk menjalankan motornya. Penelitian dimulai dengan mendata motor induksi yang digunakan. Motor induksi M1 dan M2 dilakukan pengujian atau uji coba untuk diambil data awal berupa arus, tegangan, faktor daya, efesiensi, torsi dan kecepatan. Lilitan motor diubah dengan desain 9-fasa sistem tiga lapis simetris kemudian menghubukannya dengan kumparan yang bekerja selayaknya sistem 3-fasa. Kecepatan pada motor induksi 3-fasa konvesional dengan desain 9-fasa simetris terhadap efesiensi lebih cepat dibandingkan motor induksi 3-fasa dengan sistem 3 lapis kumparan 3-fasa dikarenakan kecepatan efesiensinya yang lebih besar. Efisiensi motor induksi 3-Fasa desain 9-Fasa Simetris terhadap efisiensi motor induksi 3-fasa dengan sistem 3 lapis kumparan 3 fasa menghasilkan efisiensi lebih tinggi di bandingkan motor induksi 3-Fasa konvesional. Hal ini dikarenakan motor induksi 3-Fasa desain 9-Fasa Simetris terhadap efisiensi motor induksi 3-fasa dengan sistem 3 lapis kumparan 3 fasa.
Rancang Bangun Pembuatan Generator Magnet Permanen Satu Phasa 220 Volt 12 Kutub Model Rotor Tipe V Febryan Abdi Maulana; Anggun Anugrah; Andi Syofian
Journal of Humanities Education Management Accounting and Transportation Vol. 2 No. 1 (2025): Februari 2025
Publisher : CV. Rayyan Dwi Bharata

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.57235/hemat.v2i1.5101

Abstract

Dalam dunia industri dan teknologi, kebutuhan akan sumber energi listrik yang efisien dan andal terus meningkat. Salah satu solusi yang berkembang adalah penggunaan generator magnet permanen, yang menawarkan keunggulan seperti efisiensi tinggi, pemeliharaan rendah, dan biaya operasional yang lebih rendah dibandingkan dengan generator berbahan bakar fosil, tujuan dari penelitian karakteristik Generator Magnet Permanen Satu Phasa Untuk Model Rotor V adalah untuk mengetahui output  Tegangan  serta daya yang dihasilkan dan berapa kuat medan magnet yang digunakan.Metode yang digunakan dalam penelitian ini adalah membuat prototipe generator magnet permanen tipe V dengan menyusun magnet menjadi 12 kutub pada rotor mengikuti desain 12 kutub pada stator dengan soft iron pada rotor diganti Dengan pilot epoxy resin sebagai pengganti soft iron pada kedudukan magnet di rotor. Dengan Merubah jumlah lilitan pada stator sehingga hasil pengujian diketahui tegangan keluaran generator pada kecepatan 500 Rpm Tegangannya mencapai 230 Volt dengan Frekuensi nya 50Hz. Berdasarkan perhitungan yang digunakan dalam menentukan daya maksimum sehingga daya yang dihasilkan oleh generator ini saat diberikan beban  ialah 28 watt. Dan untuk mengetahui berapa kuat medan yang digunakan kita hanya menggunakan rumus dikarenakan tidak ada alat pengukur kekuatan magnet, sehingga didapatkan lah nilai magnet dengan perhitungan ini sebesar 0,0343T pada perancangan generator ini.
Comparative Analysis of 4G LTE Signal Quality Using Okumura Hatta's Calculations in ITP Campus Buildings Sari Pertiwi Rizki; Sitti Amalia; Andi Syofian
Journal of Education Technology Information Social Sciences and Health Vol. 3 No. 2 (2024): September 2024
Publisher : CV. Rayyan Dwi Bharata

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.57235/jetish.v3i2.3187

Abstract

Okumura Hatta is a propagation model used to estimate the signal strength received by the receiver. To find out the signal received by the receiver, a walk test process is needed. The walk test itself is a method used to measure a signal in the room. The signal measured is only on the 4G LTE network, especially Tri and Telkomsel operators on the ITP campus and the 4G LTE parameters measured are PCI (Pyhsicall Cell Identity), RSRP (Reference Signal Received Power), SINR (Signal to Interference Noise Ratio) and RSRQ ( Reference Signal Received Quality). This measurement is carried out to see what the real signal conditions are in the field so that later the results obtained can be compared with the estimated results using Okumura Hatta's propagation calculations.
Analysis of the Use of Telkomsel and Indosat Providers on the ITP Campus to Improve Internet Signal Quality for Students Rifqa Durriyatil Ilmi; Sitti Amalia; Andi Syofian
Journal of Education Technology Information Social Sciences and Health Vol. 3 No. 2 (2024): September 2024
Publisher : CV. Rayyan Dwi Bharata

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.57235/jetish.v3i2.3188

Abstract

Walktest is a direct signal quality measurement activity which aims to collect signal parameter data for an operator in a certain area. Usually the walk test is carried out indoors by walking around the area to be measured carrying a walk test device that is equipped with supporting software. Walktest data collection was carried out in several buildings on the ITP campus, namely buildings A, B, C, D, E, and F, where each building consists of 2 floors and 3 floors and the operator whose data will be taken is only for 4G networks, especially Indosat and Telkomsel operators. The parameters to be measured are PCI (Physical Cell Identity) parameters, RSRP (Referenced Signal Receive Power) parameters, RSRQ (Reference Signal Receive Quality) and SINR (Signal to Interference Noise Ratio) parameters. From the results of this walktest, we can find out what the signal quality is in the building and the factors that cause differences in signal quality in the building.