Claim Missing Document
Check
Articles

Found 7 Documents
Search
Journal : Science and Technology Indonesia

Nickel Salt Dependency as Catalyst in the Plating Bath on the Film Properties of Cu/Cu-Ni Rosyidan, Cahaya; Kurniawan, Budhy; Soegijono, Bambang; Maulani, Mustamina; Samura, Lisa; Nababan, Frederik Gresia; Putra, Valentinus Galih Vidia; Susetyo, Ferry Budhi
Science and Technology Indonesia Vol. 9 No. 3 (2024): July
Publisher : Research Center of Inorganic Materials and Coordination Complexes, FMIPA Universitas Sriwijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26554/sti.2024.9.3.529-538

Abstract

Metal plating frequently employs nickel (Ni) and copper (Cu) as anodes. Cu/ Cu-Ni film formed has many advantages, such as better corrosion resistance and high hardness characteristics. This study aims to assess the properties of Cu/Cu-Ni film, such as phase, surface morphology, crystallographic orientation, hardness, corrosion analysis, and contact angle, which were fabricated using electrodeposition with various Ni salt additions (0.3, 0.5 and 0.7 M). In addition, the cathode current efficiency (CCE) and deposition rate of the Cu/Cu-Ni electrodeposition were also investigated. An increase in Ni salt in the plating bath could enhance the pH, promoting higher CCE and depleting hydrogen evolution at the cathode, leading to the presenting Ni phase in the alloy. The higher concentration of Ni salt in the solution could also enhance the deposition rate due to a shift to a pH value, which affects the roughening of the surface morphology, promoting a higher contact angle. All crystal structures generated by Cu/Cu-Ni electrodeposition were FCC, with the preferred orientation of the (111) plane. Crystallite size and lattice strain depend on the deposition rate. Less crystallite size and lattice strain affect the film’s hardness and corrosion resistance. Moreover, the third bath had the resulting Cu-Ni layer with the best hardness and corrosion rate of around 136 HV and 0.081 mmpy.
Nichrome Dependency in Welding Layer Using In situ Fabrication on Hardness and Corrosion Properties Syaripuddin; Sopiyan; Muhammad Fauzan Perdana Putra; Maman Kartaman Ajiriyanto; Sigit Dwi Yudanto; Muhammad Yunan Hasbi; Susetyo, Ferry Budhi
Science and Technology Indonesia Vol. 9 No. 3 (2024): July
Publisher : Research Center of Inorganic Materials and Coordination Complexes, FMIPA Universitas Sriwijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26554/sti.2024.9.3.651-659

Abstract

The use of shielded metal arc welding (SMAW) equipment to synthesize alloys is one of the most promising methods as it can be used for in-situ fabrication. The hardness and corrosion properties of the deposited layer during the welding process can be enhanced by dilution of nichrome (NiCr) during the process. Therefore, the alloy was synthesized on the surface of the mild steel using SMAW equipment with various NiCr additions. The properties of the alloy were investigated using an X-ray diffraction (XRD), an Optical microscope, a Potentiostat, and a Vickers hardness apparatus. The appearance of martensite overlaps with the ferrite phase could be affected by the addition of NiCr to the alloy. An increase in NiCr content is followed by an increase in the lattice parameter value of the ferrite phase. The presence of a certain amount of nickel (Ni) contributes to the formation of lower transformation phases, including martensite. At the same time, the incorporation of chromium (Cr) also plays a significant role in promoting the formation of acicular ferrite. An increase in NiCr content in NiCr2 and NiCr3 samples results in a quantitative increase in martensite formation. Adding 0.434 g of NiCr to the weld deposited layer could result in the corrosion rate of the alloy being 0.1118 mm/y. Higher hardness is found in the NiCr3 sample, around 742.06 HV.
Diamagnetic to Ferromagnetic Like Transition of Non-Stoichiometry Barium Titanate (BaTiO3-x) Prepared by Sol-gel Method Soegijono, Bambang; Susetyo, Ferry Budhi; Notonegoro, Hamdan Akbar; Raksa, Teguh Yoga
Science and Technology Indonesia Vol. 9 No. 4 (2024): October
Publisher : Research Center of Inorganic Materials and Coordination Complexes, FMIPA Universitas Sriwijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26554/sti.2024.9.4.876-883

Abstract

The oxygen vacancy properties are significant, creating ferromagnetic properties of material in metal oxide systems like dilute magnetic semiconductors. An aqueous sol-gel method has been used in the present study to synthesize non-stoichiometry BaTiO3-x polycrystalline. In an attempt of examining the oxygen deficiency consequences on the magnetic properties, the gel samples were sintered (1000◦C) at various times (6, 12, 18, and 24 hours) under a vacuum environment. This study employs an X-ray diffraction apparatus in terms of characterizing segments and structures of the samples. It also investigates morphology and element distribution on the surface of the samples exploiting an Electron microscope where Energy dispersive spectroscopy is supplied. For the purpose of characterizing the magnetic properties of the samples, it applies vibrating sample magnetometers. The chemical state of the element and its corresponding bond to other elements was identified using X-ray photoelectron spectroscopy. Single-phase compounds were observed. The crystal system is tetragonal, but the crystal parameters are different. Increase sintering time leads to increase crystallite size and decrease in micro strain. Moreover, sintering in a vacuum environment results in oxygen deficiency and leads to the atomic ratio of Ba/Ti change as the sintering time increases. The Ba/Ti ratio change affects the transformation from diamagnetic to ferromagnetic-like. The elements (Ba, Ti and O) chemical state is shown and its bonding to the corresponding element along with the X-ray photoelectron spectroscopy pattern of the BTX2 sample. The element of oxygen binds to Ti and Ba while Ba element exists in two chemical states.
Carbon Micron-size Content Dependency in Epoxy/Carbon Composite Coated onto SPCC Plate for Automotive Bodies Protection Anggrainy, Rani; Susetyo, Ferry Budhi; Lubi, Ahmad; Yudanto, Sigit Dwi; Rosyidan, Cahaya; Soegijono, Bambang; Ajiriyanto, Maman Kartaman; Kurniawan, Ova; Nanto, Dwi
Science and Technology Indonesia Vol. 9 No. 4 (2024): October
Publisher : Research Center of Inorganic Materials and Coordination Complexes, FMIPA Universitas Sriwijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26554/sti.2024.9.4.989-998

Abstract

Conventional epoxy coating for surface metal corrosion protection reported many unsolved technical problems. Adding filler in the epoxy could enhance the promising properties of the composite coating. Our work describes in detail the synthesizing and characterizing epoxy/carbon composite coating. Epoxy was mixed with thinner high gloss (HG) and hardener and stirred using a stirrer apparatus. After blending, various carbons were added (1 wt. %, 3 wt. %, and 5 wt. %) and then appropriately stirred. The different mixture composite was coated onto the steel plate cold rolled coiled (SPCC) plate using high-volume low-pressure (HVLP) in two passes. Various characterizations were performed, including crystallographic orientation, Infra-Red (IR)-spectra, surface morphology, thickness, hydrophobicity, hardness, and corrosion using X-ray diffraction (XRD), Fourier transform infrared (FTIR), Scanning electron microscopy (SEM), portable dry film coating thickness (DFT), digital camera, Vickers microhardness tester, and Potentiostat, respectively. More carbon micron-sized content led to elevate the peak intensity, surface bumpiness, and hydrophobicity. The uppermost external bumpiness and hydrophobicity values are 23.51 µm and 101◦. Hardness depends on carbon content and more carbon leads to an increase in the hardness of the composited coating. The highest average Vickers hardness value is 28.24 HV. The coating thickness influenced the corrosion rate, more coating thickness promoted lesser corrosion rate. The highest coating thickness (60.8 µm) promoted a corrosion rate of around 5.65×10−4 mmpy.
A Small Amount of Sn Addition Effect to Cu-15Zn Alloy on Structure, Microstructure, Hardness, Corrosion Resistance, and Antibacterial Activity Basori, Imam; Sari, Yunita; Prasetya, Dendy Wardhana; Susetyo, Ferry Budhi; Alias, Juliawati; Budi, Setia; Yudanto, Sigit Dwi; Hasbi, Muhammad Yunan; Situmorang, Evi Ulina Margareta; Edbert, Daniel
Science and Technology Indonesia Vol. 10 No. 2 (2025): April
Publisher : Research Center of Inorganic Materials and Coordination Complexes, FMIPA Universitas Sriwijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26554/sti.2025.10.2.443-451

Abstract

Cu-15Zn alloy is widely used as a heat exchanger pipe. CuZn alloy was also used for cardiovascular implant applications. Several problems have been found in that alloy, such as less corrosion resistance. Therefore, various Sn (0.2, 0.7, 1, and 2 wt.%) were added to Cu-15Zn alloy in the present research to enhance corrosion resistance. Afterwards, the alloy was homogenized at 800 °C for 2 hours. Several investigations were conducted, such as structure, microstructure, hardness, corrosion resistance, and bacterial activity, using XRD, Optical microscope, Vickers hardness, Potentiostat equipment, and Digital camera. More Sn content leads to an increase in volume and a decrease in hardness. Presenting Sn in the alloy does not influence the phase in the alloy microstructure. The highest Sn content in the alloy promoted a more positive value of the alloy, indicating that the sample is more cathodic, probably due to the protective layer on the surface. A concentration of 1 wt.% Sn exhibits the most effective antibacterial effect probably due to the small crystallite size.
Cu Film Characteristics Synthesized Using Electrodeposition Technique at Various Currents and Under a Rotating Neodymium Magnet Susetyo, Ferry Budhi; Basori; Mansor, Muhd Ridzuan; Ruliyanta; Yudanto, Sigit Dwi; Rosyidan, Cahaya; Situmorang, Evi Ulina Margareta; Edbert, Daniel; Mutiara, Etty; Yulianto, Tri; Agus Jamaludin; Nanto, Dwi
Science and Technology Indonesia Vol. 10 No. 4 (2025): October
Publisher : Research Center of Inorganic Materials and Coordination Complexes, FMIPA Universitas Sriwijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26554/sti.2025.10.4.1156-1168

Abstract

In the present study, Cu films were made over Al alloy using the electrodeposition technique. Electrodeposition conducted at various currents (80, 100, and 120 mA), with and without influence by a rotating magnetic field (100 rpm of rotation). 0.5 M CuSO4 + 20 mL of H2SO4 was used for electrolyte solutions. The sample before and after electrodeposition was weighed using digital scale to calculate deposition rate and current efficiency. All formed Cu films were characterized using X-ray diffraction (XRD), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), Scanning electron microscopy equipped with Energy dispersive spectroscopy (SEM-EDS), and Potentiostat apparatus. Furthermore, antibacterial activity using Staphylococcus aureus was also investigated. Increasing the current of electrodeposition leads to an increase in deposition rate and current efficiency for both conditions (with and without rotating magnetic field influence). Based on the XRD and ATR-FTIR investigation, Cu was successfully deposited onto Al surface. Currents used for the electrodeposition process between 80-100 mA would result in a faceted structure, while using 120 mA results near to spheroidal. Shifting to higher currents leads to decreases in grain sizes and presenting a rotating magnetic field also enhances the grain size. Current and rotating magnetic influences are not linearly influencing corrosion potential, corrosion rate and antibacterial activity. The sample made using higher current plus influencing with a rotating magnetic field has less corrosion rate and higher area of inhibition at around 0.808 mmpy and 4.01 cm2.
Structural, Electrochemical, Bacterial Activity, Hardness, and Thermal Properties of Mg Alloy with Various Zn Contents Premono, Agung; Basori, Imam; Sukarno, Ragil; Susetyo, Ferry Budhi; Alhamidi, A. Ali; Anugrah, Hanif Setia; Muqafillah, Mochammad Fajr Dzakwan; Yudanto, Sigit Dwi; Hasbi, Muhammad Yunan; Situmorang, Evi Ulina Margareta; Edbert, Daniel; Mutiara, Etty; Kriswarini, Rosika; Jamaludin, Agus; Ajiriyanto, Maman Kartaman; Rosyidan, Cahaya
Science and Technology Indonesia Vol. 11 No. 1 (2026): January
Publisher : Research Center of Inorganic Materials and Coordination Complexes, FMIPA Universitas Sriwijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26554/sti.2026.11.1.96-108

Abstract

Magnesium (Mg) alloy is used for various medical purposes, such as bone implants. In the present study, MgAlSixZn alloys were created utilizing the gravity casting by adding various Zinc (Zn) (x is 0, 0.5, 1.2, and 1.7 wt.%) and then homogenized at 400 ◦C for around two hours. MgAlSixZn as homogenized samples were investigated for microstructure, phase structure, electrochemical behavior, surface morphology, bacterial activity, hardness, and thermal behavior using an optical microscope, XRD, Potentiostat, SEM-EDS, digital camera, Vickers hardness test, and Thermogravimetric apparatus, respectively. Several findings include that increasing Zn content implies a grain growth inhibition mechanism facilitated by Zn segregation at grain boundaries, increased corrosion rates, a rise in the hardness, and increased weight loss. It should be noted that the increase in the corrosion rate and weight loss occurs linearly for Zn addition in the Mg alloy until 1.2 wt.%. An increase in Zn concentration causes the peak shift in MgAlSi-based alloy samples, but no crystallographic orientation is apparent. At the end, the highest corrosion rate and inhibition area are observed in MgAlSi1.2Zn, which indicates that it is suitable for biodegradable orthopedic wire.