Claim Missing Document
Check
Articles

Found 3 Documents
Search
Journal : MINERAL

Studi Pengaruh Powder Factor Terhadap Fragmentasi Peledakan Dan Produktivitas Alat Gali Muat Di PT. Ansaf Inti Resources Kabupaten Kutai Kartanegara Provinsi Kalimantan Timur Fernando Lawangan; Revia Oktaviani; Agus Winarno
MINERAL Vol 7 No 2 (2022): MINERAL
Publisher : Jurusan Teknik Pertambangan Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/mineral.v7i2.3346

Abstract

One of the successes of a blasting is if the results of fragmentation are obtained with good size and relatively uniform so that the production target can be met. The size of the fragmentation was analyzed using Split Desktop 2.0 which resulted in a curve of the size of the fragmentation and the percentage of sieve pass (screening), at Pit 2 the optimal powder factor was between 0.20 kg/m³-0.26 kg/m³, while at Pit 7 it was between 0.22 kg/m³-0.24 kg/m³ which results in top size fragmentation in March 25.02 cm-43.2 cm, April April 35.37 cm-50.59 cm, May 19.79 cm-32.28 cm, June 26.45 cm-63.69 cm, which affect the digging time generated from the Komatsu PC 400 Excavator with an average top size fragmentation size of 38.33 cm with an average digging time of 7.95 seconds, while the Hyundai R 850 LC-9 Excavator with a fragmentation top size the average top size is 33.97 cm with an digging time of 8.44 seconds, with the average productivity of the Komatsu PC 400 Komatsu of 198.49 BCM/Hour from a plan productivity of 200 BCM/Hour while the Hyundai R 850 LC-9 average productivity a of 364.41 BCM/Hour from the plan productivity of 350 BCM/Hour
Studi Efek Skala pada Uji Kuat Tekan Uniaksial Terhadap Batupasir Pada Formasi Balikpapan Daerah Samarinda Utara, Provinsi Kalimantan Timur Milda Milda; Tommy Trides; Harjuni Hasan; Revia Oktaviani; Agus Winarno
MINERAL Vol 7 No 2 (2022): MINERAL
Publisher : Jurusan Teknik Pertambangan Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/mineral.v7i2.3352

Abstract

Scale effect testing on rocks is carried out with the aim of knowing the strength of a rock based on different dimensions. This test was carried out using a uniaxial compressive strength test and also testing the physical properties of rocks. In the rock compressive strength test used 5 dimensions of rock samples with a H/W ratio of which are 4.5/3, 6/3, 7.5/3 for dimensions of 3 cm, 5.25/3.5, 7 /3.5, 8.75/3.5 for dimensions 3.5 cm, 6/4, 8/4, 10/4, for dimensions 4 cm, 6.75/4.5, 9/4.5, 11.25/4,5 cm for the 4.5 cm dimension and for the 5 cm dimension, namely 7.5/5, 10/5 and 12.5/5. Physical properties testing is carried out to determine the porosity value in the test rock samples, which will then be compared between the porosity values ​​and the results of the compressive strength test of rock samples. Physical properties testing carried out obtained the average value of rock porosity, namely 22.562%, 22.122%, 20.454%, 21.227%, and 22.413%. In the scale effect test, it is known that the higher the rock sample, the smaller the value of the rock strength can be seen based on the R2 value obtained in the Balikpapan Formation, which is 0.0548.
Penerapan Sistem Kesehatan Dan Keselamatan Kerja Menggunakan Metode Strenght Dan Weakness Di PT Energi Cahaya Industritama Samarinda Provinsi Kalimantan Timur Siti Fadlah Musarofah; Agus Winarno; Henny Magdalena; Windhu Nugroho; Lucia Litha Respati
MINERAL Vol 7 No 2 (2022): MINERAL
Publisher : Jurusan Teknik Pertambangan Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/mineral.v7i2.3363

Abstract

Research on the application of the OHS system is carried out with the aim of analyzing things in the application of K3. The research method uses a descriptive method in the form of a questionnaire. The results of the research questionnaire the highest percentage included in the strength (strenght) including the use of PPE 83.9% agreed that it was applied followed in an orderly manner, promotions and strategies and the application of K3 64.5% strongly agreed, the existence of PPE training that was applied 74.2% agree. The results of the weakness analysis (Weakness) that the highest percentage of the results of the questionnaire diagram are incomplete first aid facilities 80% agree, the workplace is not conducive, planning for implementing K3 strategies, providing emergency facilities for accidents 83.9%, periodic initial checks to employees 74.2% quite agree.