cover
Contact Name
firmanilah kamil
Contact Email
firmanilahkamil@politap.ac.id
Phone
+6282332979897
Journal Mail Official
firmanilahkamil@politap.ac.id
Editorial Address
Jl. Rangga Sentap, Dalong Sukaharja, Kab. Ketapang, Provinsi Kalimantan Barat, 78813
Location
Kab. ketapang,
Kalimantan barat
INDONESIA
Journal of Research and Inovation in Civil Engineering as Applied Science
ISSN : -     EISSN : 28283732     DOI : https://doi.org/10.58466/rigid
Core Subject : Social, Engineering,
Journal Of Research and Inovation in Civil Engineering as Applied Science (RIGID) merupakan jurnal blind peer-review yang didedikasikan untuk publikasi hasil penelitian yang berkualitas dalam bidang ilmu Teknik sipil dan ilmu yang relevan .Artikel yang dipublikasikan di Jurnal RIGID meliputi hasil penelitian ilmiah asli (prioritas utama), sedangkan untuk artikel ulasan ilmiah yang bersifat baru (bukan prioritas utama) dan juga komentar yang bersifat kritikan terhadap hasil tulisan ilmiah yang dipublikasi oleh jurnal RIGID . Semua publikasi di jurnal RIGID bersifat akses terbuka yang memungkinkan artikel tersedia secara bebas online tanpa berlangganan apapun. Journal Of Research and Inovation in Civil Engineering as Applied Science (RIGID): Jurnal Teknik Sipil terbit 2 kali dalam setahun, setiap bulan Januari dan Agustus.
Articles 68 Documents
Analisis Dampak Aktivitas Pasar Temporer terhadap Degradasi Kinerja Ruas Jalan Perkotaan Menggunakan Mikrosimulasi Mira Lestira Hariani; Martinus Agus Sugiyanto; Hannum Chairunissa; Ridho Prasetyo; Aris Kurniawan; Relgi Sugih Rohmat Maulana
Journal of Research and Inovation in Civil Engineering as Applied Science (RIGID) Vol 5 No 2 (2026)
Publisher : Teknik Sipil, Politeknik Negeri Ketapangg

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58466/cx4prh56

Abstract

Temporary market activities along urban corridors may generate roadside friction that directly affects traffic performance. This study aims to analyze the impact of temporary market activity around the Bima Sports Complex in Cirebon City on road segment performance using a microsimulation approach. The model was developed in VISSIM based on field data, including road geometry, traffic volume, vehicle composition, speed, and roadside activity characteristics under two conditions: weekday or normal condition and weekend condition when temporary market activity takes place. Model validation was conducted using the GEH statistic by comparing simulated and observed traffic volumes. The validation results showed GEH values ranging from 0.214 to 1.138, indicating that the model was acceptable for comparative performance analysis. The results showed that total traffic volume increased from 3,148 vehicles/hour under normal conditions to 5,557 vehicles/hour on Sunday. This increase was accompanied by the use of roadside space for parking, temporary stopping, trading activities, and pedestrian movements. The average two-direction speed decreased from 27.91 km/h to 5.05 km/h, while the average delay increased from 1.65 seconds/vehicle to 94.48 seconds/vehicle. The level of service also declined from LOS A to LOS F. These findings indicate that road performance degradation was not only caused by increased traffic volume, but also by intensified roadside friction and reduced effective roadway width. The results provide an initial basis for developing temporary traffic management strategies for urban corridors affected by periodic market activities.
Analisis Persepsi Penumpang Angkutan Kota Trayek 47 Kilang terhadap Kualitas Layanan Angkutan Kota Margo Lodry Wattimury; S. G. M Amaheka; Juliet G Metekohy
Journal of Research and Inovation in Civil Engineering as Applied Science (RIGID) Vol 5 No 2 (2026)
Publisher : Teknik Sipil, Politeknik Negeri Ketapangg

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58466/4pzf4h87

Abstract

Transportasi sangat penting bagi mobilitas masyarakat, terutama di daerah terpencil seperti Desa Kilang di Kota Ambon, yang sangat bergantung pada layanan angkutan kota trayek 47. Rute ini memiliki peran strategis dengan menghubungkan masyarakat ke pusat kegiatan utama kota, termasuk Terminal Mardika sebagai simpul transit utama. Penelitian ini bertujuan untuk menilai tingkat kualitas layanan, mengidentifikasi kesenjangan antara harapan penumpang dan pengalaman yang sebenarnya, serta menentukan area prioritas yang perlu ditingkatkan pada angkutan kota trayek 47 Kilang dengan mengevaluasi persepsi di berbagai dimensi, yaitu bukti fisik, empati, responsivitas, keandalan, dan jaminan. Data dikumpulkan dari 100 responden menggunakan 24 indikator melalui penyebaran kuesioner. Hasil penelitian menunjukkan bahwa skor kualitas layanan secara keseluruhan mencapai 72,78, yang dikategorikan sebagai baik. Namun, teridentifikasi adanya kesenjangan yang signifikan antara harapan dan kenyataan, terutama terkait kebersihan terminal dan halte bus, kecepatan layanan, aksesibilitas, serta ketersediaan informasi rute. Oleh karena itu, peningkatan di bidang-bidang tersebut harus menjadi prioritas utama untuk meningkatkan kualitas layanan dan kepuasan pengguna, khususnya di wilayah yang sangat bergantung pada angkutan umum.
Pengaruh Penggunaan Serbuk Cangkang Ale-Ale Terhadap Kuat Tekan dan Absorpsi Paving Block Muhammad Rafli Mahendra; Suratmin; Firmanilah Kamil
Journal of Research and Inovation in Civil Engineering as Applied Science (RIGID) Vol 5 No 2 (2026)
Publisher : Teknik Sipil, Politeknik Negeri Ketapangg

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58466/yheh1c73

Abstract

Ketapang Regency is widely known for its ale-ale clam (Meretrix sp.) commodity, yet high consumption rates generate a massive amount of hard shell waste that remains underutilized and pollutes the environment. Concurrently, conventional paving block production continuously exploits natural fine aggregates on a massive scale. This experimental study aims to analyze the effect of utilizing ale-ale shell waste as a partial substitution for fine aggregate on the compressive strength and water absorption characteristics of paving blocks based on the SNI 03-0691-1996 standard. The reference mixture proportion used was 1 Cement : 4 Sand (by volume) with variation rates of ale-ale shell substitution at 0% (normal), 5% (Variation I), 10% (Variation II), and 15% (Variation III). A total of 48 samples were tested to evaluate the compressive strength at 7, 14, and 28 days, as well as water absorption at 28 days. The results indicated that the optimum compressive strength growth was achieved by Variation II (10% ale-ale shell), reaching 17.23 MPa at 28 days, which significantly increased compared to the normal sample at only 14.06 MPa. Conversely, increasing the shell content to 15% in Variation III drastically reduced the compressive strength to 10.78 MPa. In terms of physical testing, Variation II (10%) recorded the lowest and most dense water absorption percentage of 9.83%. The water absorption characteristics of other variations exceeded the threshold, measuring at 10.32% (normal), 10.75% (Variation I), and 11.26% (Variation III). Based on the SNI 03-0691-1996 specification, only Variation II (10%) was declared to satisfy all physical and mechanical feasibility parameters for Grade D paving block classification (non-structural/garden).
Analisis Pengaruh Tahanan Gesek Negatif Akibat Ketinggian Timbunan Berdasarkan Data CPT Alyssa Maulidina; Putera Agung Maha Agung; Aldo Wirastana Adinegara; Muhammad Fathur Rouf Hasan
Journal of Research and Inovation in Civil Engineering as Applied Science (RIGID) Vol 5 No 2 (2026)
Publisher : Teknik Sipil, Politeknik Negeri Ketapangg

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58466/fm0c4w35

Abstract

Tanah lunak merupakan masalah utama dalam pekerjaan konstruksi, karena memiliki daya dukung rendah dan mudah mengalami penurunan ketika menerima beban, khususnya pada timbunan tinggi. Salah satu dampak dari kondisi tersebut adalah timbulnya gaya gesek negatif pada pondasi tiang pancang yang dapat mengurangi kapasitas daya dukung tiang secara signifikan. Penelitian ini, bertujuan untuk menganalisis pengaruh tinggi timbunan terhadap besarnya gaya gesek negatif berdasarkan data Cone Penetration Test (CPT), serta mengevaluasi dampaknya terhadap stabilitas pondasi tiang. Data utama diperoleh dari hasil uji CPT pada titik S – 6 yang mencakup informasi parameter tanah, seperti qc, fs, dan klasifikasi tanah. Hasil perhitungan menunjukkan bahwa gaya gesek negatif meningkat seiring bertambahnya tinggi timbunan, dengan nilai tertinggi terjadi pada ketinggian timbunan 3.5 meter, namun peningkatannya tidak bersifat linier. Meskipun terjadi penambahan beban akibat gaya gesek negatif, daya dukung pondasi grup dan tiang tunggal tetap memenuhi kriteria keamanan. Selain itu, penurunan elastis yang terjadi masih berada di bawah batas izin yang ditentukan. Berdasarkan hasil tersebut, dapat disimpulkan bahwa meskipun gaya gesek negatif perlu diperhitungkan dalam desain pondasi, pondasi tiang pancang pada lokasi penelitian masih tergolong aman terhadap pengaruh tinggi timbunan.
Pengaruh Kombinasi Palm Kernel Shell Ash dan Styrene-Butadiene Rubber terhadap Kuat Tekan Beton Julyan Purnomo; Firmanilah Kamil
Journal of Research and Inovation in Civil Engineering as Applied Science (RIGID) Vol 5 No 2 (2026)
Publisher : Teknik Sipil, Politeknik Negeri Ketapangg

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58466/seff1026

Abstract

This study aims to analyze the effect of a combination of Palm Kernel Shell Ash (PKSA) and Styrene-Butadiene Rubber (SBR) Latex on the compressive strength of concrete and to determine the composition that provides optimal performance. PKSA was used as a partial substitute in the concrete mix, while SBR Latex was used as a polymer material at various concentrations. Compressive strength testing was conducted on concrete specimens at 28 days of age to determine the effect of composition variations on concrete strength. The results showed that the B-M5 mixture, with a 5% PKSA substitution and no SBR latex, yielded an average compressive strength of 14.95 MPa, whereas adding 1% SBR latex to the B-M5P1 mixture increased the compressive strength to 18.56 MPa—a 24.15% increase. However, increasing the SBR Latex content to 2% did not result in an increase in compressive strength and actually caused a decrease in strength. Among all the modified concrete variations, the combination of 5% PKSA and 1% SBR Latex produced the highest compressive strength at 28 days. The results of the study indicate that the combination of PKSA and SBR Latex can affect the compressive strength of concrete, with the effectiveness depending on the proportions of the materials used. The combination of 5% PKSA and 1% SBR latex was the most effective composition based on the compressive strength test results in this study.
Analisis Tingkat Pelayanan Trotoar Menggunakan Standar Permen PU No. 03/Prt/M/2014 dan Berbasis Persepsi Pejalan Kaki Soniya Patricia; Rizky Indra Utama; Fitra Rifwan; Yuwalitas Gusmareta
Journal of Research and Inovation in Civil Engineering as Applied Science (RIGID) Vol 5 No 2 (2026)
Publisher : Teknik Sipil, Politeknik Negeri Ketapangg

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58466/f0n66065

Abstract

Sidewalks are an essential facility for pedestrians, yet their condition in many urban areas, including Padang City, is often suboptimal due to misuse as parking areas and street-vendor sites, reducing user comfort and safety. This condition also occurs on Sisingamangaraja Street, Simpang Haru–Padang, a corridor with fairly high pedestrian movement. This study aims to analyze the sidewalk Level of Service (LOS) based on Regulation of the Minister of Public Works No. 03/PRT/M/2014, to determine pedestrian perception, and to interpret the relationship between them. A descriptive quantitative approach was used, with primary data from field observation, sidewalk dimension measurement, and pedestrian flow calculation referring to the Highway Capacity Manual (HCM) 2000, together with a questionnaire distributed to 100 respondents (exceeding the minimum of 89 obtained from the Slovin formula at a 10% error margin). Results show that five of six sidewalk segments fall into LOS A and one into LOS B, while the average pedestrian-perception score is 2.72 (fair category), with safety scoring lowest at 2.28. A mismatch was found between the technical results and user perception, caused by side friction not captured by the quantitative LOS parameters. This study recommends that sidewalk service-level evaluation integrate technical analysis with user perception simultaneously
Analisis Sistem Manajemen Mutu pada Proyek Pembangunan Gedung Perkuliahan UPI Kampus Tasikmalaya Nazar Caesar Ramadhan; Danny Meirawan
Journal of Research and Inovation in Civil Engineering as Applied Science (RIGID) Vol 4 No 1 (2025)
Publisher : Teknik Sipil, Politeknik Negeri Ketapangg

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58466/rigid.v4i1.1722

Abstract

This study analyzes the quality management system implementation in the construction project of the UPI Tasikmalaya campus lecture building. Using a qualitative descriptive approach with document analysis, the study evaluates the conformity level of the quality management system with ISO 9001:2015 standards and identifies factors that support and hinder its implementation. Secondary data, including technical specifications, project plans, and quality documents, were analyzed systematically. The findings indicate that most elements of the quality management system meet ISO 8001:2015 standards, especially in the documentation of quality plans and external supplier control. However, internal audit implementation requires improvement to enhance overall quality control. Key hindrances include dependence on external suppliers, delays in supervisor approvals, and inadequate structured inspections. On the other hand, detailed technical specifications, guaranteed materials from official suppliers, and a well-defined project team structure are significant supports. The study concludes that implementing a comprehensive internal audit system and structured field inspections can optimize quality management. Recommendations include diversifying material suppliers, simplifying approval processes, and enhancing routine quality monitoring.
Pengaruh Pecahan Genteng dan Keramik sebagai bahan Pengganti Semen terhadap Kuat Tekan Devi Rosalia; Julyan Purnomo; Nur Aida
Journal of Research and Inovation in Civil Engineering as Applied Science (RIGID) Vol 4 No 1 (2025)
Publisher : Teknik Sipil, Politeknik Negeri Ketapangg

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58466/rigid.v4i1.1723

Abstract

In a construction project, roof tiles and ceramics that are cracked (broken) are often thrown away as construction waste. Apart from that, house demolition activities also produce roof tile and ceramic shards that are not reused. No one has conducted research where this wastes is used as a substitute for cement. This research aims to determine the effect of roof tile and ceramic fragments as a substitute for cement on the compressive strength value of concrete. Experimental methods were used in this research. Observations were carried out at the structure and materials laboratory, Ketapang State Polytechnic. The results of the research show that the effect of using tile and ceramic fragments as a substitute for cement with varying percentages of 5% tile, 5% ceramic, 5% tile and ceramic, and 10% tile and ceramic in concrete has an effect on the compressive strength value. The greater the percentage of tile and ceramic fragments used in the concrete mixture, the more the compressive strength value of the concrete will decrease. The average compressive strength of concrete at 7 days between normal concrete and concrete with varing percentages of 5% tile, 5% ceramic, 5% tile and ceramic, and 10% tile and ceramic has a comparative value of 12.76 M.Pa, 12.03 MPa, 12.16 MPa, and 11.03 MPa. The average estimated compressive strength of concrete aged 28 days has comparative values of 19.00 MPa, 18.51 MPa, 18.71 MPa, 17.43 MPa, and 16.97 MPa.
Analisis Perkerasan Kaku (Rigid Pavement) dengan Mutu Beton Fs’45 terhadap Kuat Tekan dan Lentur: Studi Kasus: Rekonstruksi Ruas Jalan Baros-Petir Riki Setiawan; Odih Supratman
Journal of Research and Inovation in Civil Engineering as Applied Science (RIGID) Vol 4 No 1 (2025)
Publisher : Teknik Sipil, Politeknik Negeri Ketapangg

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58466/rigid.v4i1.1726

Abstract

This study aims to analyze the use of FS 45-grade concrete in rigid pavement for the reconstruction of the Baros-Petir Road. FS 45 concrete, with a minimum compressive strength of 45 MPa and flexural strength of 5–6 MPa, is designed to withstand heavy traffic loads, particularly from vehicles such as trucks. Testing involved the analysis of compressive and flexural strength using cylindrical samples (150 mm in diameter and 300 mm in height) and beam samples (150 mm x 150 mm x 600 mm) at 7 and 28 days. The concrete mixing process followed a Design Mix Formula, ensuring optimal material proportions and strength. Results revealed that FS 45 concrete achieved an average compressive strength of 42.81 MPa and an average flexural strength of 5.5 MPa, meeting the minimum quality standards of 39.7 MPa and 4.4 MPa, respectively. The concrete demonstrated excellent durability against heavy traffic loads, enhanced the pavement's service life, and reduced long-term maintenance costs. Factors such as subgrade conditions, drainage systems, and construction processes were identified as critical elements for successful rigid pavement implementation. This research contributes significantly to improving transportation infrastructure, offering a more durable and efficient solution, particularly for roads with high traffic intensity.
Analysis and Design in Kuningan Regency: Study Case Of The Road Section Of Sukadana Kuningan - Karangwuni Cirebon Ghilang Alfy Taruna; Mira Lestira Harianti
Journal of Research and Inovation in Civil Engineering as Applied Science (RIGID) Vol 4 No 1 (2025)
Publisher : Teknik Sipil, Politeknik Negeri Ketapangg

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58466/rigid.v4i1.1733

Abstract

Kuningan Regency is one of the areas that has tourism potential with mountainous geographical conditions with various natural beauties and natural springs. Therefore, Kuningan Regency requires good and planned management in order to achieve optimal results. One of the supporting facilities for tourism in Kuningan Regency is road access that must be developed. In supporting the Government Program related to Regional Development Potential and in accordance with the Regional Spatial Plan of Kuningan Regency Year 2011-2031 regarding the development of road networks to support the tourism sector. So it is necessary to plan road development, which is intended to facilitate relations from one region to another. Where the Road Network has a very important function, namely as a transportation infrastructure in the accessibility and mobility of goods and services which is the lifeblood for encouraging economic growth, social, cultural and national stability, as well as efforts to equalize and spread the building.On the horizontal alignment of the Sukadana Kuningan - Karangwuni Cirebon road section there are 8 bend points. Including 6 Full-Cricle bend points and 6 Spiral-Circle-Spiral bend points. The vertical alignment of the Sukadana Kuningan - Karangwuni Cirebon road section has 22 arch points consisting of 11 concave vertical points and 13 convex vertical points. Making vertical arches aims to balance the number of excavations and embankments at the existing location. The amount of excavation in this road section plan is 530656.5m3 while the amount of embankment is 1859787.22m3.. The type of pavement used is flexible pavement with a thickness of 40 cm top grade LPA, 6 cm AC-BC and 4 cm AC-WC. There is 1 bridge with a length of 80 m. The construction of the Ciawigebang Ring Road section in Kuningan Regency costs Rp. 351,385,080,000.00, - (THREE HUNDRED FIVE HUNDRED ONE MILLION THREE HUNDRED EIGHTEEN THOUSAND FIVE MILLION EIGHT HUNDRED THOUSAND THOUSAND RUPIAH). and can be completed within 1 year.