cover
Contact Name
Yunita Djamalu
Contact Email
naurainezia23@gmail.com
Phone
+6281244439447
Journal Mail Official
ijree.ppv@gmail.com
Editorial Address
Kampus 2 Sekolah Vokasi UNG, Jalan Drs. Achmad Nadjamuddin No. 35 (Eks. Jl Raden Saleh) Kel. Limba U2 Kec. Kota Selatan, Kota Gorontalo 96115
Location
Kota gorontalo,
Gorontalo
INDONESIA
Journal Of Renewable Energy Engineering
ISSN : 29861063     EISSN : 2988554X     DOI : 10.56190
Journal Of Renewable Energy Engineering (JREE) is a peer-reviewed journal published twice a year (April and October) by the Vocational Program of the State University of Gorontalo. The Vocational Journal of Science and Technology provides direct open access to its content. The aim of this journal is to provide the expression of ideas, as well as places for knowledge fields that can understand applied science and technology issues and knowledge, with a new space of journals covering the fields of science and technology. applied science and technology research including Mathematics, Physics, Technology, and Informatics
Articles 65 Documents
PERBANDINGAN KONDUKTIVITAS TERMAL MATERIAL LOGAM MENGGUNAKAN METODE SEDERHANA BERBASIS WAKTU LELEH Maghfirah Abarang; Siti Sarah; Hesti Mikarromah; Lukman Alhakim J Hasan; Moh.Rizky Dg Malino
Journal Of Renewable Energy Engineering Vol. 4 No. 2 (2026): Journal Of Renewable Energy Engineering (Oktober)
Publisher : Program Vokasi-Universitas Negeri Gorontalo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56190/jree.v4i2.87

Abstract

ABSTRACT Thermal response of metallic conductors is important in heat exchangers, solar-thermal systems, and power-electronic cooling. This study comparatively evaluates transient heat conduction in iron and copper bars using a simple paraffin melting-time method based on the Ingen-Housz principle, with emphasis on quantitative interpretation and uncertainty limits. Two cylindrical bars of identical dimensions (30 cm long and 0.5 cm in diameter) were stabilized at room temperature and heated at one end with a standardized alcohol burner positioned 2.0 cm from the specimen. Paraffin indicators and surface temperature were observed at five positions from 5 to 25 cm using a calibrated K-type thermocouple. Copper reached the melting criterion earlier at every observation point. At 25 cm, paraffin melted after 875 s on copper and 3,825 s on iron, corresponding to a 77.12% shorter response time for copper and an iron-to-copper response-time ratio of 4.37. Across all positions, the ratio ranged from 2.00 to 5.22, with a mean of 4.19 ± 1.28. Average surface temperatures at melting were 41.18°C for iron and 39.88°C for copper, deviating by 25.13% and 27.49% from the nominal 55°C reference. The variations reflect transient heat accumulation, thermal diffusivity, radial heat losses, sensor placement, thermal contact resistance, and the melting range of commercial paraffin. Because heat input and losses were not fully quantified and independent replications were unavailable, the method is appropriate as a low-cost comparative instructional screening method rather than an absolute measurement of thermal conductivity. ABSTRAK Respons termal konduktor logam penting pada penukar panas, sistem surya termal, dan pendinginan elektronika daya. Penelitian ini mengevaluasi secara komparatif konduksi panas transien pada batang besi dan tembaga menggunakan metode sederhana berbasis waktu leleh parafin yang mengacu pada prinsip Ingen-Housz, dengan penekanan pada batas interpretasi kuantitatif dan ketidakpastian. Dua batang silindris berdimensi sama, panjang 30 cm dan diameter 0,5 cm, disetimbangkan pada suhu ruang kemudian dipanaskan pada salah satu ujung menggunakan burner spiritus terstandar dengan jarak 2,0 cm dari spesimen. Indikator parafin dan suhu permukaan diamati pada lima posisi antara 5 hingga 25 cm menggunakan termokopel tipe-K terkalibrasi. Tembaga mencapai kriteria leleh lebih cepat pada seluruh titik pengamatan. Pada jarak 25 cm, parafin meleleh setelah 875 s pada tembaga dan 3.825 s pada besi, sehingga waktu respons tembaga 77,12% lebih singkat dengan rasio waktu respons besi terhadap tembaga sebesar 4,37. Pada seluruh posisi, rasio berkisar 2,00–5,22 dengan rata-rata 4,19 ± 1,28. Suhu permukaan rata-rata saat leleh adalah 41,18°C pada besi dan 39,88°C pada tembaga, dengan deviasi 25,13% dan 27,49% terhadap acuan nominal 55°C. Variasi tersebut dipengaruhi oleh akumulasi panas transien, difusivitas termal, rugi panas radial, posisi sensor, resistansi kontak termal, dan rentang pelelehan parafin komersial. Karena masukan dan rugi kalor belum dikuantifikasi secara penuh serta pengulangan independen belum tersedia, metode ini tepat sebagai demonstrasi komparatif dan penyaringan awal berbiaya rendah, bukan sebagai pengukuran mutlak konduktivitas termal
ANALISIS REDISTRIBUSI BEBAN ANTAR FASA UNTUK MENURUNKAN ARUS NETRAL PADA GARDU DISTRIBUSI PLN ULP TELAGA Abdul Muthalib Maku; Lanto Mohamad Kamil Amali; Yasin Mohamad; Taufiq Ismail Yusuf; Ade Irawaty Tolango
Journal Of Renewable Energy Engineering Vol. 4 No. 2 (2026): Journal Of Renewable Energy Engineering (Oktober)
Publisher : Program Vokasi-Universitas Negeri Gorontalo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56190/jree.v4i2.101

Abstract

ABSTRACT Load imbalance in low-voltage distribution networks can cause neutral current and compromise operational performance. This case study analyzes the phase imbalance at the GT-240 distribution substation of PLN ULP Telaga using field measurements, phasor calculations, and ETAP 22.5 unbalanced load-flow simulation. The measured peak-load data for Outgoing 1 were 154.6, 159.3, and 151.9 A across phases R, S, and T, with a measured neutral current of 41.6 A; the corresponding idealized 120° phasor calculation yielded approximately 6.5 A. For Outgoing 2, the measured neutral current was 96.9 A, while the calculated phasor magnitude was approximately 87.2 A. The calculated incoming neutral current before redistribution was approximately 88.1 A, distinct from the ETAP simulated value of 90.7 A. Under the simulated load-redistribution scenario, the ETAP indicated a decrease in the incoming neutral current from 90.7 A to 6.7 A (84.0 A or approximately 92.6%). The differences between measured, analytical, and simulated results highlight the need to distinguish their assumptions and measurement conditions. The proposed balancing scenario has not been reported as field-implemented. ABSTRAK Ketidakseimbangan beban pada jaringan distribusi tegangan rendah dapat menimbulkan arus netral dan memengaruhi kinerja operasi sistem. Penelitian studi kasus ini menganalisis ketidakseimbangan antar fasa pada Gardu Distribusi TR GT-240 PLN ULP Telaga melalui pengukuran lapangan, perhitungan fasor, dan simulasi aliran daya tidak seimbang menggunakan ETAP 22.5. Pada outgoing 1, arus fasa terukur R, S, dan T berturut-turut adalah 154,6 A, 159,3 A, dan 151,9 A, dengan arus netral terukur 41,6 A; perhitungan fasor dengan asumsi sudut 120° menghasilkan arus netral sekitar 6,5 A. Pada outgoing 2, arus netral terukur sebesar 96,9 A, sedangkan hasil perhitungan fasor sekitar 87,2 A. Arus netral incoming hasil perhitungan fasor pada kondisi awal adalah sekitar 88,1 A, berbeda dari hasil simulasi ETAP sebesar 90,7 A. Dalam skenario redistribusi beban yang disimulasikan, arus netral incoming ETAP turun dari 90,7 A menjadi 6,7 A, atau berkurang 84,0 A (sekitar 92,6%). Perbedaan hasil ukur, hitung, dan simulasi perlu dibaca sesuai metode dan asumsi masing-masing; realisasi penyeimbangan di lapangan belum dilaporkan.
EVALUASI KINERJA MPPT P & O DAN MPPT IncCond PADA SISTEM FOTOVOLTAIK DALAM KONDISI INTENSITAS CAHAYA MATAHARI YANG DINAMIS Jusuf Mohamad Z Tobamba; Lanto Mohamad Kamil Amali; Sardi Salim; Ade Irawaty Tolango; Taufiq Ismail Yusuf
Journal Of Renewable Energy Engineering Vol. 4 No. 2 (2026): Journal Of Renewable Energy Engineering (Oktober)
Publisher : Program Vokasi-Universitas Negeri Gorontalo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56190/jree.v4i2.102

Abstract

ABSTRACT  Solar energy is one of the most promising renewable energy sources for supporting sustainable energy needs. However, the performance of photovoltaic systems is highly influenced by dynamic variations in solar irradiance throughout the day. This study aims to analyze and compare the dynamic response of Maximum Power Point Tracking (MPPT) methods, namely Perturb and Observe (P&O) and Incremental Conductance (IncCond), in optimizing the output power of a 200 Wp photovoltaic system. The research employed an experimental approach through direct field testing conducted from 06:00 to 17:00 WITA. The testing was conducted at Campus 4 of Universitas Negeri Gorontalo (UNG), Bone Bolango, in June. The photovoltaic (PV) panel was oriented toward the north with a tilt angle of 30°. The weather conditions during the testing followed the actual conditions on the day of the experiment. The Perturb and Observe (P&O) and Incremental Conductance (IncCond) methods were tested simultaneously under the same irradiance conditions, ensuring that the performance of both methods was compared under identical environmental conditions. The measured parameters included solar irradiance, voltage, current, and output power. Based on the four interval-mean values reported in, IncCond produced an average output power of 39.53 W compared with 36.30 W for P&O, corresponding to an 8.91% higher mean output power. IncCond also produced higher interval-mean power in all four reported time blocks, supporting its better power-extraction performance under the tested dynamic irradiance conditions.   ABSTRAK  Energi surya merupakan salah satu sumber energi terbarukan yang memiliki potensi besar dalam mendukung kebutuhan energi berkelanjutan. Namun, performa sistem fotovoltaik sangat dipengaruhi oleh variasi intensitas cahaya matahari yang terjadi secara dinamis sepanjang hari. Penelitian ini bertujuan untuk menganalisis dan membandingkan respons dinamis Maximum Power Point Tracking (MPPT), yaitu Perturb and Observe (P&O) dan Incremental Conductance (IncCond), dalam mengoptimalkan daya keluaran sistem fotovoltaik 200 Wp. Metode penelitian menggunakan pendekatan eksperimen dengan pengujian langsung di lapangan pada rentang waktu 06.00–17.00 WITA. Pengujian dilakukan di Kampus 4 Universitas Negeri Gorontalo (UNG), Bone Bolango, pada bulan Juni. Panel surya diposisikan menghadap ke arah utara dengan sudut kemiringan 30°. Kondisi cuaca selama pengujian mengikuti kondisi cuaca aktual pada hari pelaksanaan pengujian. Pengujian terhadap metode Perturb and Observe (P&O) dan Incremental Conductance (IncCond) dilakukan secara simultan pada kondisi irradiance yang sama, sehingga perbandingan kinerja kedua metode dilakukan pada kondisi lingkungan yang sama. Parameter yang diukur meliputi intensitas cahaya matahari, tegangan, arus, dan daya output. Hasil penelitian menunjukkan bahwa tegangan output relatif stabil pada kisaran 13–14 V, sedangkan arus dan daya output secara umum meningkat seiring kenaikan intensitas cahaya. Berdasarkan empat nilai rata-rata interval, IncCond menghasilkan daya output rata-rata 39,53 W, sedangkan P&O sebesar 36,30 W, atau 8,91% lebih tinggi. IncCond juga menghasilkan daya rata-rata yang lebih tinggi pada seluruh empat interval waktu yang dilaporkan.
STUDI KOMPARATIF KINERJA BERBAGAI PEREKAT ALAMI PADA BRIKET LIMBAH PADAT KELAPA SAWIT BERDASARKAN KARAKTERISTIK MUTU BAHAN BAKAR Anna Pusfita Sari; Azzah Adillah; Syabana Azmi Ramadhani; Zaki Alimuddin; Ubang Fauzi; Ade Irmadiki Agipa
Journal Of Renewable Energy Engineering Vol. 4 No. 2 (2026): Journal Of Renewable Energy Engineering (Oktober)
Publisher : Program Vokasi-Universitas Negeri Gorontalo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56190/jree.v4i2.106

Abstract

ABSTRACT  Palm oil solid waste has potential as a raw material for briquettes because of its relatively high carbon content, but briquette quality strongly depends on the binder and production conditions. Previous studies report varied binder performance that has not been compared systematically. This article compares the reported performance of various natural binders for palm oil solid-waste briquettes based on calorific value, moisture content, and ash content. A literature review was conducted on eight Indonesian scientific articles published between 2012 and 2023, covering nine natural binders: cassava starch (kanji), sugarcane juice, waste rice, rubber, bilimbi (belimbing wuluh), cassava flour, tapioca flour, rice flour, and molasses. The data were analyzed descriptively and comparatively against SNI 01-6235-2000. All binders produced calorific values of 5379.53–7209.94 cal/g, above the SNI minimum of 5000 cal/g. Rubber gave the highest reported calorific value (7209.94 cal/g), followed by tapioca flour and rice flour in one study (6930.11 and 6922.22 cal/g). The lowest reported moisture content was obtained using tapioca flour (2.35%), and the lowest ash content was obtained using bilimbi (2.01%). Waste rice failed the SNI limits for both moisture (11.49%) and ash (9.45%), while the ash content of tapioca flour in a palm shell–bagasse mixture (8.43%) slightly exceeded the 8% limit. Differences in raw materials, binder formulation, and production conditions limit direct comparison among studies. Overall, rubber, tapioca flour, rice flour, and bilimbi showed the most promising results among the studies reviewed, rather than constituting a definitive ranking of binder effectiveness.   ABSTRAK  Limbah padat kelapa sawit berpotensi dimanfaatkan sebagai bahan baku briket karena masih mengandung karbon yang cukup tinggi, tetapi mutu briket dipengaruhi oleh jenis perekat dan kondisi pembuatannya. Hasil penelitian terdahulu menunjukkan kinerja perekat yang beragam dan belum dibandingkan secara sistematis. Artikel ini bertujuan membandingkan kinerja berbagai perekat alami yang dilaporkan pada briket limbah padat kelapa sawit berdasarkan nilai kalor, kadar air, dan kadar abu. Metode yang digunakan adalah studi literatur terhadap delapan artikel ilmiah nasional yang terbit pada tahun 2012–2023 dengan sembilan jenis perekat alami, yaitu kanji, air tebu, limbah nasi, karet, belimbing wuluh, tepung singkong, tepung tapioka, tepung beras, dan molase. Data dianalisis secara deskriptif dan komparatif terhadap SNI 01-6235-2000. Seluruh perekat menghasilkan nilai kalor 5379,53–7209,94 kal/g, di atas batas minimum SNI sebesar 5000 kal/g. Perekat karet memiliki nilai kalor tertinggi yang dilaporkan (7209,94 kal/g), diikuti tepung tapioka dan tepung beras pada salah satu studi (6930,11 dan 6922,22 kal/g). Kadar air terendah yang dilaporkan diperoleh pada tepung tapioka (2,35%) dan kadar abu terendah pada belimbing wuluh (2,01%). Perekat limbah nasi tidak memenuhi batas SNI untuk kadar air (11,49%) maupun kadar abu (9,45%), sedangkan kadar abu tepung tapioka pada campuran cangkang sawit–ampas tebu (8,43%) sedikit melampaui batas 8%. Perbedaan bahan baku, formulasi perekat, dan kondisi pembuatan membatasi perbandingan langsung antarstudi. Secara umum, karet, tepung tapioka, tepung beras, dan belimbing wuluh menunjukkan hasil yang paling menjanjikan di antara studi yang ditinjau, tanpa dimaksudkan sebagai peringkat efektivitas yang bersifat universal.
VOLTAGE-LOSS-POWER FACTOR TRADE-OFFS UNDER STAGED PV-WIND PENETRATION IN A 20 kV DISTRIBUTION NETWORK Robi Kurniawan; Muhammad Daud; Arnawan Hasibuan; Haposan Vincentius Manalu; Arif Juwito
Journal Of Renewable Energy Engineering Vol. 4 No. 2 (2026): Journal Of Renewable Energy Engineering (Oktober)
Publisher : Program Vokasi-Universitas Negeri Gorontalo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56190/jree.v4i2.107

Abstract

Distributed photovoltaic (PV) and wind turbine generator (WTG) integration can improve voltage profiles and reduce losses, but the associated changes in active and reactive power flow may reduce the power factor observed at distribution buses. This study evaluates that trade-off in a radial 20 kV network in Meulaboh using five steady-state scenarios in ETAP 19.0.1. The installed PV-WTG capacity was increased from 0 to 1.4 MW in 350 kW increments while the load was held constant. Bus voltage, total active power loss, signed reactive-power output, and bus power factor were compared across scenarios. At 1.4 MW, the voltages at GH Calang and GH Lamno increased by 0.90 and 1.09 kV, respectively, and total active loss decreased from 906.5 to 634.5 kW, equivalent to a 30.01% reduction. However, the power factor at GH Calang declined from 91.7% to 85.8%, while the magnitude of the signed reactive indicator increased. The 700 kW scenario was the first discrete case in which every evaluated bus reached at least 18 kV and the minimum power factor remained 86.2%. It is therefore identified as the minimum technically adequate candidate among the simulated cases, rather than a globally optimal capacity. The results demonstrate that voltage improvement and loss reduction should be assessed together with reactive-power direction and power-factor margin when planning high renewable penetration.
PENINGKATAN PERFORMA DYE SENSITIZED SOLAR CELL (DSSC) BERBASIS TiO2 MESOPORI DAN PEWARNA ALAMI ANTOSIANIN: PENGARUH SURFAKTAN DAN WAKTU ADSORPSI Sarinah Pakpahan; Yunita Djamalu; Fuad Pontoiyo
Journal Of Renewable Energy Engineering Vol. 4 No. 2 (2026): Journal Of Renewable Energy Engineering (Oktober)
Publisher : Program Vokasi-Universitas Negeri Gorontalo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56190/jree.v4i2.108

Abstract

ABSTRACT Dye-sensitized solar cells (DSSCs) based on natural dyes offer a low-cost alternative, but their efficiency remains limited. This study examined the influence of TiO2 photoanode pore structure on DSSC performance. Mesoporous TiO2 was synthesized by CTAB-assisted coprecipitation (TiO2–CTAB) and compared with TiO2 prepared by the same route without CTAB. Red spinach (Amaranthus tricolor) extract, expected to be rich in betacyanins, was used as the sensitizer, and cells with an active area of 1 cm² (n = 3) were tested under a 150 W halogen lamp at 100 mW/cm². XRD showed pure anatase with Scherrer crystallite sizes of 10.0 and 9.1 nm without and with CTAB, respectively. N2 physisorption revealed type IV isotherms; CTAB only slightly changed the BET surface area (95.1 vs. 98.3 m²/g) but increased the total pore volume by 47% and the average pore diameter from 6.4 to 9.1 nm. UV-Vis spectra indicated comparable approximate band gaps (≈2.9–3.0 eV) and stronger visible-light scattering for TiO2–CTAB. On CTAB-free TiO2, efficiency increased with dye soaking time, reaching 1.25% at 6 h. At 6 h, the TiO2–CTAB photoanode achieved 1.83% (Jsc = 6.50 mA/cm², Voc = 0.52 V, FF = 0.54), 46% higher than CTAB-free TiO2. The improvement was dominated by Jsc and is attributed to larger, more accessible mesopores rather than a larger surface area, whereas the slightly lower FF suggests higher electron-transport resistance in the more porous, low-temperature-processed film. These results indicate that pore-structure engineering is a promising route for improving natural-dye DSSCs.   ABSTRAK Dye-sensitized solar cell (DSSC) berbasis pewarna alami menawarkan biaya yang rendah, tetapi efisiensinya masih terbatas. Penelitian ini mengkaji pengaruh struktur pori fotoanoda TiO2 terhadap kinerja DSSC. TiO2 mesopori disintesis melalui kopresipitasi berbantuan CTAB (TiO2–CTAB) dan dibandingkan dengan TiO2 yang disintesis dengan prosedur identik tanpa CTAB. Ekstrak bayam merah (Amaranthus tricolor) yang diperkirakan kaya betasianin digunakan sebagai sensitizer, dan sel dengan luas aktif 1 cm² (n = 3) diuji di bawah lampu halogen 150 W pada intensitas 100 mW/cm². Hasil XRD menunjukkan fase anatase murni dengan ukuran kristalit Scherrer 10,0 nm tanpa CTAB dan 9,1 nm dengan CTAB. Fisisorpsi N2 menunjukkan isoterm tipe IV; CTAB hampir tidak mengubah luas permukaan BET (95,1 dan 98,3 m²/g), tetapi meningkatkan volume pori total sebesar 47% dan diameter pori rata-rata dari 6,4 menjadi 9,1 nm. Spektrum UV-Vis menunjukkan perkiraan celah pita yang sebanding (≈2,9–3,0 eV) dan hamburan cahaya tampak yang lebih kuat pada TiO2–CTAB. Pada TiO2 tanpa CTAB, efisiensi meningkat seiring waktu perendaman hingga 1,25% pada 6 jam. Pada waktu perendaman yang sama, fotoanoda TiO2–CTAB mencapai efisiensi 1,83% (Jsc = 6,50 mA/cm², Voc = 0,52 V, FF = 0,54), atau 46% lebih tinggi daripada TiO2 tanpa CTAB. Peningkatan ini didominasi oleh Jsc dan dikaitkan dengan pori yang lebih besar dan lebih mudah diakses, bukan dengan luas permukaan yang lebih besar, sedangkan FF yang sedikit lebih rendah mengindikasikan resistansi transpor elektron yang lebih tinggi pada film yang lebih porus dan diproses pada suhu rendah. Hasil ini menunjukkan bahwa rekayasa struktur pori fotoanoda berpotensi meningkatkan kinerja DSSC berbasis pewarna alami.
EVALUASI KINERJA PENGERING IKAN TIPE EFEK RUMAH KACA DENGAN RAK ALUMINIUM BERLUBANG DAN MONITORING BERBASIS INTERNET OF THINGS (IoT) Gabriel Stella Sinay; Yunita Djamalu; Arifin Matoka
Journal Of Renewable Energy Engineering Vol. 4 No. 2 (2026): Journal Of Renewable Energy Engineering (Oktober)
Publisher : Program Vokasi-Universitas Negeri Gorontalo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56190/jree.v4i2.111

Abstract

ABSTRACT  Open-sun fish drying is highly weather dependent and exposes products to environmental contamination. This study evaluated the operational and thermal performance of a greenhouse-effect fish dryer equipped with perforated aluminum trays and an Internet of Things (IoT)-based monitoring system. A three-day field test (28–30 June 2026) was conducted using one batch of 10 oci fish with an initial mass of 1,031 g. Dryer-chamber and chimney temperatures were measured using PT100 resistance temperature detectors, while ambient temperature and relative humidity were monitored using DHT11; data were processed by ESP32 and displayed through Blynk. Sample mass was recorded during active drying (09.00–15.00 WITA), and incoming solar energy was estimated from NASA POWER daily irradiation. The mean chamber temperature was 45.57 °C, 7.39 °C above the mean ambient temperature (38.18 °C), while the mean chimney temperature was 47.96 °C. Sample mass decreased to 319 g (69.06% reduction), with 610 g lost during 18 h of active drying and 102 g during overnight intervals; the mean active-period mass-loss rate was 33.89 g/h. Estimated drying and dryer efficiencies were 8.10% and 8.34%, respectively. The monitoring system provided all scheduled observations, but the efficiency values should be interpreted as conservative estimates because full-day irradiation was used for a six-hour active drying interval. The system is operationally feasible for monitoring-assisted solar drying, but validated moisture-content measurements, calibrated sensors, direct irradiance measurements, and replicated control tests are required before product quality or the specific benefit of perforated trays can be established.   ABSTRAK Penjemuran ikan secara terbuka sangat bergantung pada cuaca dan berisiko menyebabkan kontaminasi produk. Penelitian ini mengevaluasi kinerja operasional dan termal pengering ikan tipe efek rumah kaca (ERK) yang dilengkapi rak aluminium berlubang dan sistem monitoring berbasis Internet of Things (IoT). Uji kinerja lapangan dilakukan selama tiga hari (28–30 Juni 2026) menggunakan satu batch berisi 10 ekor ikan oci dengan massa awal 1.031 g. Temperatur ruang pengering dan cerobong diukur menggunakan RTD PT100, sedangkan temperatur dan kelembapan relatif lingkungan dipantau dengan DHT11; data diproses oleh ESP32 dan ditampilkan melalui Blynk. Massa sampel dicatat selama pengeringan aktif (09.00–15.00 WITA), sementara energi surya masuk diestimasi dari iradiasi harian NASA POWER. Temperatur ruang pengering rata-rata mencapai 45,57 °C atau 7,39 °C di atas temperatur lingkungan (38,18 °C), sedangkan temperatur cerobong rata-rata 47,96 °C. Massa sampel turun menjadi 319 g atau berkurang 69,06%; sebanyak 610 g hilang selama 18 jam pengeringan aktif dan 102 g selama jeda malam, dengan laju penurunan massa rata-rata 33,89 g/jam pada periode aktif. Efisiensi pengeringan dan efisiensi alat hasil estimasi masing-masing sebesar 8,10% dan 8,34%. Sistem monitoring menyediakan seluruh titik pengamatan terjadwal, tetapi nilai efisiensi perlu dipahami sebagai estimasi konservatif karena iradiasi satu hari penuh digunakan untuk interval pengeringan aktif enam jam. Sistem menunjukkan kelayakan operasional untuk pengeringan surya berbantuan monitoring, namun pengukuran kadar air tervalidasi, kalibrasi sensor, pengukuran iradiasi langsung, dan uji kontrol berulang tetap diperlukan sebelum mutu produk atau kontribusi khusus rak berlubang dapat disimpulkan.
INTEGRASI ENERGI TERBARUKAN PADA SMART MICROGRID: OPTIMASI, FLEKSIBILITAS, RESILIENSI, DAN KECERDASAN BUATAN Yunita Djamalu; Ervan Hasan Harun; Aswin; Fuad Pontoiyo
Journal Of Renewable Energy Engineering Vol. 4 No. 2 (2026): Journal Of Renewable Energy Engineering (Oktober)
Publisher : Program Vokasi-Universitas Negeri Gorontalo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56190/jree.v4i2.112

Abstract

ABSTRACT High renewable energy penetration is transforming smart microgrids from local generation systems into cyber-physical energy platforms that must coordinate planning, storage, flexible demand, electric vehicles, multi-energy coupling, market interactions, resilience, and intelligent control. This review synthesizes 56 Scopus-indexed records published in 2024-2026, all supplied in the reference extraction file, using a structured integrative review and thematic evidence synthesis. The literature was organized into six research fronts: joint sizing and energy-management co-design; flexibility portfolios based on batteries, hydrogen, pumped hydro, shared storage, and electric vehicles; transactive and multi-microgrid coordination; uncertainty-aware control and artificial intelligence; resilience and cybersecurity; and multi-energy sector coupling. The evidence shows a clear shift from isolated techno-economic sizing toward multi-objective, multi-time-scale, degradation-aware, and increasingly adaptive control. Recent studies also demonstrate that energy-management strategy can reshape the optimal physical design of a microgrid, while shared storage, peer-to-peer exchange, vehicle-to-grid, and hydrogen expand system flexibility beyond conventional batteries. However, the literature remains fragmented across planning and real-time control, physical and cyber resilience, technical optimization and market fairness, as well as simulation and field validation. The most defensible research gap is therefore not the absence of optimization algorithms, but insufficient end-to-end integration among co-design, uncertainty management, user behavior, lifecycle impacts, cybersecurity, and deployment constraints. A next-generation smart-microgrid framework is proposed to connect physical assets, sensing, forecasting, intelligent energy management, flexibility markets, multi-criteria objectives, and implementation feedback. Three linked priorities emerge: end-to-end multi-horizon co-design with degradation-aware flexibility, safe and explainable AI validated through HIL, field, and multi-site testing, and integrated physical-cyber resilience; market fairness and lifecycle governance are treated as cross-cutting constraints. ABSTRAK Penetrasi energi terbarukan yang semakin tinggi mengubah smart microgrid dari sistem pembangkitan lokal menjadi platform energi siber-fisik yang harus mengoordinasikan perencanaan, penyimpanan, beban fleksibel, kendaraan listrik, kopling multi-energi, interaksi pasar, resiliensi, dan kendali cerdas. Artikel ini mensintesis 56 rekaman terindeks Scopus periode 2024-2026 yang seluruhnya berasal dari file ekstraksi referensi yang disediakan, menggunakan tinjauan integratif terstruktur dan sintesis bukti tematik. Literatur dikelompokkan ke dalam enam frontier: co-design antara sizing dan energy management; portofolio fleksibilitas berbasis baterai, hidrogen, pumped hydro, shared storage, dan kendaraan listrik; koordinasi transaktif dan multi-microgrid; kendali sadar ketidakpastian dan kecerdasan buatan; resiliensi dan keamanan siber; serta kopling multi-energi. Bukti menunjukkan pergeseran dari sizing tekno-ekonomi yang terpisah menuju optimasi multi-objektif, multi-skala waktu, sadar degradasi, dan semakin adaptif. Studi terbaru juga menunjukkan bahwa strategi energy management dapat mengubah desain fisik optimal microgrid, sementara shared storage, peer-to-peer exchange, vehicle-to-grid, dan hidrogen memperluas fleksibilitas melampaui baterai konvensional. Meskipun demikian, literatur masih terfragmentasi antara perencanaan dan kendali real-time, resiliensi fisik dan siber, optimasi teknis dan fairness pasar, serta simulasi dan validasi lapangan. Gap utama bukan kekurangan algoritma optimasi, melainkan belum kuatnya integrasi end-to-end antara co-design, pengelolaan ketidakpastian, perilaku pengguna, dampak siklus hidup, cybersecurity, dan kendala implementasi. Review ini mengusulkan kerangka smart microgrid generasi berikutnya dan memprioritaskan tiga agenda yang saling terkait: co-design multi-horizon dengan valuasi fleksibilitas sadar degradasi, safe dan explainable AI yang divalidasi melalui HIL, lapangan, dan multi-lokasi, serta integrasi physical-cyber resilience; fairness pasar dan tata kelola siklus hidup diperlakukan sebagai constraint lintas tema.
DARI PENGOLAHAN LIMBAH KE SISTEM BIOENERGI SIRKULAR CERDAS: REVIEW KOMPREHENSIF BIODIGESTER, OPTIMASI PROSES, KEBERLANJUTAN, DAN ADOPSI TEKNOLOGI Zulfandi Gobel; Jumiati Ilham; Siti Fauziah
Journal Of Renewable Energy Engineering Vol. 4 No. 2 (2026): Journal Of Renewable Energy Engineering (Oktober)
Publisher : Program Vokasi-Universitas Negeri Gorontalo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56190/jree.v4i2.113

Abstract

ABSTRACT Small-scale biodigesters have evolved from organic-waste treatment devices and simple biogas producers into components of circular bioenergy systems that integrate energy recovery, nutrient management, emission reduction, food security, and rural development. This critical integrative review synthesizes 74 Scopus-indexed articles published between 2020 and 2026 from a pre-selected literature corpus, focusing on reactor design, co-digestion, operational control, predictive modeling, artificial intelligence, techno-economic assessment, life-cycle assessment, multicriteria decision analysis, circular bioeconomy, safety, and sustained technology adoption. The evidence shows that biodigester performance cannot be explained by a single technical variable. Feedstock composition, organic loading rate, hydraulic retention time, pH, temperature, insulation, pretreatment, digestate management, and gas purification interact to determine methane production and quality. Recent studies show a shift from reactor-centered optimization toward predictive systems using ANN, ANFIS, RSM, kinetic models, and process simulation, while sustainability assessment increasingly includes economics, emissions, health, safety, energy access, and user acceptance. Although biodigesters can replace fuelwood or LPG and improve waste management, their long-term performance remains constrained by maintenance failures, methane leakage or venting, H2S risks, investment costs, feedstock mismatch, and weak post-installation services. The review proposes an intelligent circular bioenergy framework linking design, monitoring, prediction, by-product valorization, sustainability assessment, and governance as a research agenda for the next generation of biodigester systems.   ABSTRAK Biodigester skala kecil berkembang dari teknologi pengolahan limbah organik dan penyedia biogas menjadi komponen penting dalam sistem bioenergi sirkular yang mengintegrasikan pemulihan energi, pengelolaan nutrien, pengurangan emisi, ketahanan pangan, dan pembangunan pedesaan. Review kritis-integratif ini mensintesis 74 artikel terindeks Scopus periode 2020-2026 dari korpus literatur yang telah dipraseleksi, dengan perhatian khusus pada perkembangan desain reaktor, ko-digesti, pengendalian kondisi operasi, pemodelan prediktif, kecerdasan buatan, analisis teknoekonomi, life cycle assessment, multicriteria decision analysis, circular bioeconomy, keselamatan, serta faktor sosial dan kelembagaan yang menentukan keberlanjutan penggunaan biodigester. Literatur menunjukkan bahwa peningkatan kinerja tidak dapat dijelaskan oleh satu variabel teknis. Komposisi substrat, organic loading rate, hydraulic retention time, pH, temperatur, insulasi, pretreatment, pengelolaan digestate, dan pemurnian gas saling berinteraksi dalam menentukan produksi dan kualitas metana. Perkembangan terbaru memperlihatkan pergeseran dari optimasi reaktor menuju sistem prediktif menggunakan ANN, ANFIS, RSM, model kinetik, dan simulasi proses, disertai penilaian multidimensi yang mempertimbangkan kelayakan ekonomi, emisi, kesehatan, keselamatan, akses energi, dan penerimaan pengguna. Meskipun berbagai studi menunjukkan manfaat penggantian kayu bakar, LPG, atau pengelolaan limbah konvensional, hambatan pemeliharaan, kebocoran atau venting, H2S, biaya investasi, ketidaksesuaian kapasitas dengan ketersediaan substrat, serta lemahnya dukungan purnainstalasi masih membatasi keberlanjutan sistem. Review ini mengusulkan kerangka sistem bioenergi sirkular cerdas sebagai agenda penelitian biodigester generasi berikutnya.
PEMETAAN POTENSI TONGKOL JAGUNG SEBAGAI BIOMASSA ENERGI DI PROVINSI GORONTALO: KAJIAN BERBASIS STATISTIK DAN SKENARIO KETERSEDIAAN Yunita Djamalu_aut; Romi Djafar; Burhan Liputo
Journal Of Renewable Energy Engineering Vol. 4 No. 2 (2026): Journal Of Renewable Energy Engineering (Oktober)
Publisher : Program Vokasi-Universitas Negeri Gorontalo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56190/jree.v4i2.115

Abstract

ABSTRACT  Corn is the dominant commodity of Gorontalo Province, yet its cobs remain an underused residue. This study maps the potential of corncob biomass in the province using a scenario-based mass and energy balance. Provincial production was taken from Statistics Indonesia (BPS) for 2024 and 2025 (625,972 and 653,290 t of shelled maize at 14% moisture) and from provincial administrative reports (1.2 million t) as an upper scenario. Dry cob mass was estimated with a cob-to-grain ratio (base 0.13) and an availability factor (base 0.60), allocated to regencies using 2021 harvested-area shares as a preliminary spatial proxy, and converted to energy using a lower heating value of 17.35 MJ kg-1. In the base scenario, theoretical cob potential is about 84,900 t per year and available potential about 51,000 t (range 26,000-84,000 t), equal to roughly 884 TJ or 49 GWh of electricity at 20% efficiency. Boalemo, Pohuwato, Gorontalo and Gorontalo Utara account for about 97% of the proxy allocation, which is intended to prioritize field surveys rather than represent actual 2025 regency-level supply. Sensitivity analysis shows that the choice of production dataset dominates uncertainty, followed by availability and the cob ratio. A structured qualitative screening based on technology maturity and complexity, feedstock-conditioning requirements, scale and capital intensity, and local logistical fit identifies densification into pellets or briquettes as the most practical initial pathway, while bioethanol and chemicals remain longer-term options. The findings are desk-based estimates and require field validation of production, availability and fuel properties before investment decisions.   ABSTRAK  Jagung merupakan komoditas utama Provinsi Gorontalo, tetapi tongkolnya masih menjadi residu yang belum termanfaatkan dengan baik. Penelitian ini memetakan potensi biomassa tongkol jagung di provinsi tersebut melalui neraca massa dan energi berbasis skenario. Produksi provinsi diambil dari Badan Pusat Statistik (BPS) untuk 2024 dan 2025 (625.972 dan 653.290 ton pipilan kadar air 14%) serta dari laporan administratif daerah (1,2 juta ton) sebagai skenario batas atas. Massa kering tongkol diperkirakan dengan rasio tongkol-pipilan (dasar 0,13) dan faktor ketersediaan (dasar 0,60), dialokasikan ke kabupaten/kota menggunakan pangsa luas panen 2021 sebagai proxy spasial awal, lalu dikonversi menjadi energi dengan nilai kalor bawah 17,35 MJ kg-1. Pada skenario dasar, potensi teoretis tongkol sekitar 84.900 ton per tahun dan potensi tersedia sekitar 51.000 ton (rentang 26.000-84.000 ton), setara sekitar 884 TJ atau 49 GWh listrik pada efisiensi 20%. Boalemo, Pohuwato, Gorontalo, dan Gorontalo Utara menyumbang sekitar 97% pada alokasi proxy; angka ini digunakan untuk menentukan prioritas survei lapangan, bukan sebagai gambaran pasokan aktual 2025 per wilayah. Analisis sensitivitas menunjukkan bahwa pilihan sumber data produksi paling menentukan ketidakpastian, disusul faktor ketersediaan dan rasio tongkol. Penyaringan kualitatif terstruktur berdasarkan kematangan dan kompleksitas teknologi, kebutuhan pengondisian bahan baku, kesesuaian skala dan intensitas modal, serta kecocokan logistik lokal menempatkan pemadatan menjadi pelet atau briket sebagai pintu masuk awal yang paling praktis, sedangkan bioetanol dan bahan kimia lebih cocok untuk jangka panjang. Temuan ini berupa taksiran berbasis data sekunder dan memerlukan validasi lapangan atas produksi, ketersediaan, dan sifat bahan bakar sebelum keputusan investasi diambil.