Garuda - Garba Rujukan Digital

Development of Multimedia Based on Advanced Powerpoint and a Problem-Based Learning Model for Reading Workmanship Signs Nugroho, Dian Restu; Khumaedi, Muhammad; Hadromi , Hadromi
Journal of Vocational and Career Education Vol. 9 No. 1 (2024): July 2024
Publisher : Universitas Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15294/jvce.v9i1.25528

This research aims to develop Advanced PowerPoint-based multimedia using the Problem-Based Learning (PBL) model and the ADDIE method. The material used in this research is workmanship signs. The objectives of this study are to: (1) test the feasibility of the developed multimedia based on Advanced PowerPoint and the Problem-Based Learning model, (2) evaluate the differences in learning outcomes between public and private vocational schools, and (3) Analyze the extent of improvement in learning outcomes among students who receive instruction using Advanced PowerPoint-based multimedia with the PBL model, compared to those who receive conventional instruction. Data were analyzed using one-way ANOVA, and the results showed a statistically significant difference between the tested groups. Furthermore, the LSD post hoc test revealed significant differences between pairs of groups, indicating that classes using Advanced PowerPoint-based multimedia with the PBL model achieved the highest learning outcomes. In contrast, private vocational school classes showed moderate N-Gain values. In conclusion, Advanced PowerPoint-based multimedia combined with the PBL model is effective in improving student learning outcomes in the topic of workmanship signs.

Development of a Mobile Learning-Based Education and Training System to Improve Professional Competence of Vocational High School Teachers Maheswari, Zahra Akira; Kusumawardani, Rini; Hudallah, Noor
Journal of Vocational and Career Education Vol. 9 No. 2 (2024): December 2024
Publisher : Universitas Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15294/jvce.v9i1.25530

This study was conducted to address the gap between the professional competence of vocational high school teachers and the competency standards established by the Regulation of the Minister of National Education Number 16 of 2007 and the Decree of the Directorate General of Teachers and Education Personnel Number 2626/B/HK.04.01/2023 regarding the Teacher Competency Model. Limited access to conventional education and training also contributes to this issue. The objective of this research is to develop a mobile learning-based training system using multi-platform integration that is engaging, effective, and adaptive in order to enhance the professional competence of vocational high school teachers.The development process applied the ADDIE model through five comprehensive stages. In the analysis stage, a needs assessment survey identified an urgent need for technology-based training. During the design stage, various components of the mobile learning system were structured. The development stage involved expert validation, and the system was rated as “Highly Feasible” by media experts. In the implementation stage, the system was delivered online and involved 230 vocational high school teachers. The evaluation stage showed an increase in the average score from 15.62 in the pre-test to 18.84 in the post-test, with an N-Gain score of 0.74, categorized as high. Additionally, participants rated the system as “Very Engaging”, with an attractiveness score of 3.6 out of 4, equivalent to 90%.The findings indicate that the mobile learning-based education and training system developed in this study is effective in improving the professional competence of vocational high school teachers.

Development of an Electrical Lighting Installation Demonstration Tool Using a Triac-Based Light Sensor Switch Wibowo, Salvo Eka; Anis, Samsudin; Arief, Ulfah Mediaty
Journal of Vocational and Career Education Vol. 9 No. 1 (2024): July 2024
Publisher : Universitas Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15294/jvce.v9i1.27120

The automatic light sensor switch commonly used in the Electrical Power Installation Engineering Department at SMK Negeri 1 Tonjong is a factory-manufactured sensor switch with a complex circuit design, which has led to a decline in student learning motivation. This issue becomes the main reason for conducting research on the development of an instructional model for electrical lighting installations using a TRIAC-based light sensor switch, specifically applied in smart building lighting systems. This study employed a Research and Development (R&D) approach using the ADDIE development model. The findings of the study are as follows: (1) The developed product was deemed suitable for use, with a Content Validity Index (CVI) score of 0.88 from media experts and a Percentage of Agreement (PA) of 88%, and a CVI score of 0.91 and PA of 91% from subject material experts; (2) Product testing results indicated a high level of effectiveness, as shown by the Independent Sample t-Test on the N-gain Score, yielding a significance value (Sig. 2-tailed) of 0.000 < 0.05; and (3) The reproducibility coefficient (Kr) and scalability coefficient (Ks) were 92% and 81.5%, respectively, indicating that the instructional model for electrical lighting installation using the TRIAC-based light sensor switch is highly practical .

The Role of Career Guidance in Preparing Vocational School Students in the Building Construction Department for the Workforce Zulaikhah, Siti; Sutopo, Yeri; Kusumawardani, Rini; Supraptono, Eko; Fuad, Muhammad Nur; Nurfitriyani, Sintya Andryati
Journal of Vocational and Career Education Vol. 9 No. 2 (2024): December 2024
Publisher : Universitas Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15294/jvce.v9i2.27472

The Central Bureau of Statistics indicates that the open unemployment rate for vocational high school graduates remains one of the highest categories at 9.60%. In vocational education, particularly in the Design Modeling and Building Information program, this gap is also evident in the low preparedness of students in understanding the career paths available and the lack of strategies they have to enter the workforce. This study aims to analyze the role of career guidance in preparing vocational high school students for the workforce. The role of career guidance is focused on three main directions for vocational high school graduates: working in industry, continuing education to higher education, and entrepreneurship. This study uses a quantitative approach with a sample of 72 students from Vocational High School Negeri 3 Semarang, divided into two classes. The sampling technique used is total sampling. Data collection was conducted through work readiness and career guidance questionnaires, as well as interviews with instruments that were previously validated by experts. Data analysis included tests for normality, homogeneity, linearity, and simple linear regression. The results showed that career guidance plays a very significant role in the work readiness of students with a value of 68.8%. Meanwhile, the remaining 31.2% is influenced by other factors not explored in the study, such as motivation, interests, talents, and effort. This was supported by interview results, where students stated that career guidance helped them recognize their potential, explore job opportunities, and begin planning their next steps, whether for employment, continuing education, or entrepreneurship.

Educational Game Wordwall for Enhancing Daily Face Makeup Competencies of Class X Students at Vocational High School in Beauty Cosmetology Program Putriana, Megawati Eko; Sutopo, Yeri; Usman, Nur Qudus
Journal of Vocational and Career Education Vol. 9 No. 2 (2024): December 2024
Publisher : Universitas Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15294/jvce.v9i2.27616

This study aims to develop educational media in the form of a web-based game using Wordwall, focused on teaching daily face makeup skills at Vocational High School 4 Yogyakarta. The primary issues addressed in this research include the use of a less interactive lecture-based method, low student learning outcomes falling below the Minimum Completion Criteria, and the underutilization of technology in the learning process. The research follows the ADDIE development model, which consists of five stages: analysis, design, development, implementation, and evaluation. The media was designed to encourage unconscious learning and improve students learning outcomes. Validation was conducted by subject matter and media experts, while its practicality was tested by both teachers and students. The validation results revealed that the media is highly feasible, with an average score of 4.84, while the practicality test achieved a score of 97.3%, categorized as very practical. The effectiveness test, using N-Gain analysis and independent sample t-tests, demonstrated a significant improvement in student learning outcomes. Therefore, the Wordwall educational game media is considered valid, practical, and effective for use in the Beauty Cosmetology program. This media can serve as an innovative solution to enhance the quality of both the teaching process and student learning outcomes at vocational high schools.

Development of Canva-Based Interactive Media in a Project-Based Learning Model to Improve the Cognitive Abilities of Vocational High School Students Surya, Rizky Gheni Praba Surya; Sutopo, Yeri
Journal of Vocational and Career Education Vol. 9 No. 2 (2024): December 2024
Publisher : Universitas Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15294/jvce.v9i2.27772

The teaching of Pancasila and Civic Education (PPKn) in Vocational High Schools (SMK) still faces challenges in delivering material that is engaging and easy to understand. The abstract nature of Pancasila values often makes them difficult to grasp without supportive media. The lack of interactive and digital-based learning media becomes a barrier to meaningful learning. Therefore, this study aims to develop Canva-based interactive learning media within a Project-Based Learning (PjBL) model to improve students’ cognitive abilities in PPKn subjects at SMK. This research is a type of Research and Development (R&D) using the ADDIE model (Analysis, Design, Development, Implementation, Evaluation). The developed product is a digital interactive media using Canva, presenting Pancasila content visually, communicatively, and contextually. Validation was conducted by two media experts and three content experts. Practicality was tested through questionnaires to teachers, while effectiveness was evaluated using pretests and posttests in experimental and control classes. The implementation was carried out using a project-based learning approach. The results show that: (1) the media visualizes Pancasila values effectively and attractively; (2) expert validation confirms its feasibility with media expert CVI at 0.88 (PoA 88%) and content expert CVI at 0.91 (PoA 91%); (3) practicality is in the “very practical” category (average score 93.3%); and (4) effectiveness testing indicates a significant difference (t = 4.727; sig. = 0.000) and higher N-Gain in the experimental class. Therefore, Canva-based interactive media is feasible, practical, and effective for project-based PPKn learning in SMK.

The Effect of Using E-Module Based on Flipbook Maker on Student Understanding of the Starter System Suprayogi, Sidiq; Sutopo, Yeri; Priyatna, Bambang Sugeng; Anis, Samsudin
Journal of Vocational and Career Education Vol. 9 No. 2 (2024): December 2024
Publisher : Universitas Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15294/jvce.v9i2.28636

A significant challenge in contemporary education is the limited understanding of technical subjects by students, such as the starter system within the Automotive Engineering program. The use of less engaging learning media leads to a decrease in student motivation, which ultimately affects academic performance. This study investigates the impact of an e-module, designed with Flipbook Maker, on student comprehension of the starter system. A quantitative approach was employed, utilizing pretests and posttests, along with surveys distributed to measure changes in understanding and student responses to digital learning media. The collected data was analyzed using simple linear regression through the SPSS software. The study involved a sample of 70 students from the XI grade of the Automotive Engineering program at SMK Negeri 1 Kandeman. The results revealed that the use of the e-module significantly improved student understanding, with a correlation coefficient (R) of 0.469 and an effect size (R Square) of 0.673, indicating that 67.3% of the variance in understanding was explained by the e-module. In conclusion, the e-module effectively enhanced student comprehension of the starter system. Students expressed a preference for digital learning media due to its flexibility in being accessed anytime and anywhere, both online and offline.

The Development of a Digital Electronics Trainer for Teaching Fundamentals of Electronics Engineering Suryani, Titin; Anis, Samsudin; Arief, Ulfah Mediaty
Journal of Vocational and Career Education Vol. 9 No. 2 (2024): December 2024
Publisher : Universitas Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15294/jvce.v9i2.29004

The teaching of Fundamentals of Electronics Engineering often faces challenges in bridging theoretical knowledge with practical application. A lack of interactive and contextual learning media hinders students’ comprehension of foundational concepts and diminishes their motivation to learn. This study addresses these challenges by developing a digital electronics trainer as an instructional tool to support the learning process. The trainer is designed and implemented to help students explore digital electronics concepts—specifically logic gates—through relevant problem-solving activities. The aim is to enhance students’ conceptual understanding and engagement. This research employs a Research and Development (R&D) approach, utilizing the ADDIE model (Analysis, Design, Development, Implementation, Evaluation). The results demonstrate the significant effectiveness of the digital electronics trainer in improving students’ cognitive abilities. An N-Gain score of 0.71 indicates a high level of cognitive improvement in the experimental group using the trainer, compared to the control group that relied on textbook-based learning.

The Implementation of Learning Media in the Teaching Process of Productive Subjects in the Building Engineering Department at SMK Negeri 7 Semarang Wijaya, Ahya ‘Alimah Rahmah Haque; Qudus, Nur; Sukamta, Sri
Journal of Vocational and Career Education Vol. 9 No. 2 (2024): December 2024
Publisher : Universitas Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15294/jvce.v9i2.29411

The use of learning media in vocational education, particularly in productive subjects at Vocational High Schools (SMK), plays a crucial role in enhancing students‘ understanding of technical concepts and preparing them for the workforce. This study aims to analyze the implementation of learning media in the teaching process of building engineering subjects at SMK Negeri 7 Semarang and to provide recommendations for developing effective and contextual learning media. A descriptive qualitative approach was employed, with participants including productive subject teachers, eleventh-grade students, and documents related to the Merdeka Curriculum. Data were collected through observation, in-depth interviews, and documentation, and were analyzed using the interactive model of Miles & Huberman. The findings indicate that visual-based, digital, and physical teaching aids significantly contribute to increasing student enthusiasm, focus, and comprehension of building construction materials. However, several challenges were identified, including limited infrastructure, low digital literacy among teachers and students, and dependency on licensed software. Based on these findings, it is recommended to develop collaborative, project- based, and locally contextualized learning media, enhance teacher capacity through educational technology training, and optimize digital platforms to support more inclusive and innovative learning experiences. Thus, the appropriate use of learning media can improve the quality of vocational education and strengthen students‘ readiness to meet job market demands in the field of building construction.

Development of an E-Book for Stage Makeup Learning to Enhance Cognitive Abilities of Beauty and SPA Vocational High School Students in Phase F Purwismaningsih , Purwismaningsih; Sutopo, Yeri; Ihsani, Ade Novi Nurul
Journal of Vocational and Career Education Vol. 9 No. 2 (2024): December 2024
Publisher : Universitas Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15294/jvce.v9i1.29425

This study aims to develop and analyse an e-book as a learning medium in the subject of makeup at SMK Negeri 1 Pekalongan. The focus of the research includes the feasibility, practicality, and effectiveness of the e-book used in the teaching and learning activities. The ADDIE model is employed (Analysis, Design, Development, Implementation, Evaluation), with assessment instruments from media experts, subject matter experts, teachers, and students. The results of the feasibility and validity tests show that the e-book is classified as feasible and reliable. The practicality test indicates that the e-book is considered practical by the productive teachers. Using the N-gain method, the effectiveness test shows that the e-book is quite effective in improving students' cognitive abilities and skills in stage makeup. Based on the results, the developed e-book is deemed feasible, practical, and effective for use in learning at SMK Negeri 1 Pekalongan.

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
-

Contact Email
jvce@mail.unnes.ac.id

Phone
-

Journal Mail Official
jvce@mail.unnes.ac.id

Editorial Address
Sekaran, Kec. Gn. Pati, Kota Semarang, Jawa Tengah 50229

Location
Kota semarang,

Jawa tengah

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name -

Contact Email jvce@mail.unnes.ac.id

Phone -

Journal Mail Official jvce@mail.unnes.ac.id

Editorial Address Sekaran, Kec. Gn. Pati, Kota Semarang, Jawa Tengah 50229

Location Kota semarang, Jawa tengah INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
-

Contact Email
jvce@mail.unnes.ac.id

Phone
-

Journal Mail Official
jvce@mail.unnes.ac.id

Editorial Address
Sekaran, Kec. Gn. Pati, Kota Semarang, Jawa Tengah 50229

Location
Kota semarang,

Jawa tengah

INDONESIA