Garuda - Garba Rujukan Digital

p-Index From 2021 - 2026

12.629

P-Index

This Author published in this journals

All Journal Jurnal Dedikasi Jurnal Edukasi Elektro Prosiding Seminar Nasional Sains Dan Teknologi Fakultas Teknik PROtek : Jurnal Ilmiah Teknik Elektro Journal of Electrical Technology UMY JETT (Jurnal Elektro dan Telekomunikasi Terapan) JEEMECS (Journal of Electrical Engineering, Mechatronic and Computer Science) Techne : Jurnal Ilmiah Elektroteknika Rang Teknik Journal Jurnal Otomasi Kontrol dan Instrumentasi Jurnal ULTIMA Computing Digital Zone: Jurnal Teknologi Informasi dan Komunikasi Jambura Journal of Health Sciences and Research Jurnal Sistem Cerdas Jurnal Intake : Jurnal Penelitian Ilmu Teknik dan Terapan Buletin Ilmiah Sarjana Teknik Elektro Jambura Journal of Electrical and Electronics Engineering Jurnal Teknika TIN: TERAPAN INFORMATIKA NUSANTARA Indonesian Journal of Cultural and Community Development Journal of Computer Networks, Architecture and High Performance Computing Community Empowerment JiTEKH (Jurnal Ilmiah Teknologi Harapan) Journal of Electrical Engineering and Computer (JEECOM) JASEE Journal of Application and Science on Electrical Engineering JEEE-U (Journal of Electrical and Electronic Engineering-UMSIDA) Indonesian Journal of Innovation Studies Jurnal Al Ulum: LPPM Universitas Al Washliyah Medan SinarFe7 Prosiding Seminar Nasional Teknik Elektro, Sistem Informasi, dan Teknik Informatika (SNESTIK) Prosiding Seminar Nasional Teknologi Industri Berkelanjutan PELS (Procedia of Engineering and Life Science) Procedia of Social Sciences and Humanities Electrician : Jurnal Rekayasa dan Teknologi Elektro JEECS (Journal of Electrical Engineering and Computer Sciences) Innovative Technologica: Methodical Research Journal Prosiding Seminar Nasional Rekayasa dan Teknologi (TAU SNAR- TEK) Journal for Technology and Science Academia Open Jurnal Elektronika dan Telekomunikasi Journal of Renewable Energy, Electronics and Control

Indah Sulistiyowati

Program Studi Teknik Elektro, Universitas Muhammadiyah Sidoarjo, Sidoarjo

Author-ID : 3234066

Aerospace Engineering Agriculture, Biological Sciences & Forestry Arts Humanities Automotive Engineering Biochemistry, Genetics & Molecular Biology Chemical Engineering, Chemistry & Bioengineering Civil Engineering, Building, Construction & Architecture Computer Science & IT Control & Systems Engineering Decision Sciences, Operations Research & Management Dentistry Earth & Planetary Sciences Economics, Econometrics & Finance Education Electrical & Electronics Engineering Energy Engineering Environmental Science Health Professions Immunology & microbiology Industrial & Manufacturing Engineering Languange, Linguistic, Communication & Media Law, Crime, Criminology & Criminal Justice Library & Information Science Materials Science & Nanotechnology Mathematics Mechanical Engineering Medicine & Pharmacology Neuroscience Nursing Physics Public Health Social Sciences Veterinary Other

Published : 101 Documents Claim Missing Document

Claim Missing Document

Articles

7 8 9 10 11

IoT Integrated Electric Car Energy Monitoring System: Case Study of IMEI TEAM UMSIDA fudin, muchammad alif; Sulistiyowati, Indah; Falah, Agus Hayatal
Jambura Journal of Electrical and Electronics Engineering Vol 6, No 2 (2024): Juli - Desember 2024
Publisher : Electrical Engineering Department Faculty of Engineering State University of Gorontalo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.37905/jjeee.v6i2.25198

The increasingly rapid development of technology accompanied by the ever-increasing consumption of fossil fuels has a negative impact on environmental sustainability and provides challenges related to innovation regarding these problems. Electric fuel vehicles are one of the relevant innovations to reduce air pollution and minimize exhaust emissions from fossil fuel vehicles on global warming. IMEI TEAM UMSIDA continues to contribute to the development of vehicles powered by electric energy by participating in energy-saving vehicle competitions such as KMHE and Shell Eco Marathon. In developing electric cars, the IMEI TEAM UMSIDA experienced problems related to obtaining information on the car's energy consumption in real time or when the car was on the track. This problem prompted researchers to create a tool that is capable of monitoring car energy consumption in real time and can be accessed remotely. The experimental method is the right method for this research, because with this method the researcher carries out many experiments to ensure that the tool system works well. The parameters produced in this research are voltage, current, power and energy values in units of time. This tool is equipped with an IoT-based communication system with an internet network as a link between the user, hardware system and software system which functions to carry out remote monitoring in real time. The test results show that this tool functions well and is able to carry out voltage measurements with an error percentage of less than 0.1% and current measurements with an error percentage of less than 0.2%.

Smartphone-based Automatic Monitor Lizard Trap Prototype for Tilapia Fish Ponds Nanggala, Dikas Pandu; Sulistiyowati, Indah; Saputra, Dwi Hadidjaja Rasjid; Syahrorini, Syamsudduha
Jambura Journal of Electrical and Electronics Engineering Vol 7, No 1 (2025): Januari - Juni 2025
Publisher : Electrical Engineering Department Faculty of Engineering State University of Gorontalo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.37905/jjeee.v7i1.28309

Nila merupakan ikan air tawar yang banyak dibudidayakan karena memiliki beberapa kelebihan dibanding jenis ikan lainnya, ikan ini unggul dalam pertumbuhan cepat, kemudahan berkembang biak, serta kemampuan adaptasi yang baik terhadap lingkungan. Meskipun demikian, budidaya ikan ini tidak lepas dari ancaman hama yang dapat mengganggu, khususnya predator biawak yang dapat menghancurkan populasi ikan dalam kolam dengan cepat. Kemajuan perkembangan teknologi IoT dapat dimanfaatkan dalam pembuatan prototipe perangkap otomatis dengan notifikasi berbasis smartphone. Dengan demikian, pemilik kolam dapat mengetahui jika biawak telah berhasil terperangkap tanpa harus berada di area kolam sepanjang waktu. Penelitian ini menggunakan metode eksperimen, metode ini melibatkan pengamatan dari suatu eksperimen dengan membuat suatu alat serta melakukan uji coba prototipe yang telah selesai dibuat. Alat ini menggunakan sensor PIR sebagai masukan yang akan diproses oleh mikrokontroller ESP32 dengan keluaran berupa pintu otomatis dan notifikasi aplikasi Blynk pada smartphone secara bersamaan. Hasil pengujian pertama menunjukkan penggunaan ESP32 dengan koneksi hotspot mendapatkan perolehan waktu rata-rata 0.76 detik yang dapat dikatakan sangat responsif. Sedangkan untuk pengujian kedua, yaitu kecepatan reaksi setelah sensor berhasil mendeteksi objek hingga pintu tertutup secara otomatis memperoleh waktu rata-rata 2.33 detik yang tergolong cukup baik meskipun masih ada jeda waktu. Pada pengujian ketiga, perangkap ini berhasil menjebak biawak pada hari ke-3. Meskipun masih terdapat beberapa kekurangan, penelitian ini sangat bermanfaat bagi pembudidaya ikan, terutama pada kolam tanah karena perangkap ini membantu pemilik kolam mengatasi potensi kerugian akibat biawak yang kerap memangsa ikan hasil budidaya. Selain itu, pemilik kolam juga mendapat penghasilan tambahan dari hasil menjual biawak hidup dibanding menjual biawak mati.Tilapia is a freshwater fish that is widely cultivated because it has several advantages over other types of fish, this fish excels in fast growth, ease of breeding, and good adaptability to the environment. However, this fish farming is not free from the threat of pests that can interfere, especially predatory lizards that can destroy fish populations in ponds quickly. The advancement of IoT technology development can be utilized in making automatic trap prototypes with smartphone-based notifications. Thus, the pond owner can know if the monitor lizard has been successfully trapped without having to be in the pond area all the time. This research uses the experimental method, this method involves observing an experiment by making a tool and testing the prototype that has been completed. This tool uses a PIR sensor as input that will be processed by the ESP32 microcontroller with the output in the form of an automatic door and notification of the Blynk application on the smartphone simultaneously. The first test results show the use of ESP32 with a hotspot connection getting an average time of 0.76 seconds which can be said to be very responsive. As for the second test, which is the speed of reaction after the sensor successfully detects the object until the door is automatically closed, the average time is 2.33 seconds which is quite good even though there is still a delay. In the third test, this trap successfully trapped monitor lizards on the 3rd day. Although there are still some shortcomings, this research is very useful for fish farmers, especially in earthen ponds because this trap helps pond owners overcome potential losses due to lizards that often prey on cultured fish. In addition, the pond owner also gets additional income from selling live monitor lizards instead of selling dead lizards.

Implementation of Image Processing On Hydroponic Pakcoy Plants To Detect AB MIX Nutrient Levels Rosyidah, Izzah; Anshory, Izza; Sulistiyowati, Indah; Syahrorini, Syamsudduha
Jambura Journal of Electrical and Electronics Engineering Vol 6, No 2 (2024): Juli - Desember 2024
Publisher : Electrical Engineering Department Faculty of Engineering State University of Gorontalo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.37905/jjeee.v6i2.26143

One of the current land use alternatives is cultivating vegetables using the hydroponic method. One way that must be considered to get good results when cultivating pak choy using the hydroponic method is to periodically maintain the pH level of the nutrient media in the hydroponic pak choy plant. This research aims to create a system that can detect nutrient levels and the condition of hydroponic plants. To test this, hydroponic plant nutrition was carried out using 2 types of treatment. The first treatment, hydroponic pak choy plants are given nutrition according to the optimal PPM (Parts Per Million) nutrient dose, namely in the range of 1100 to 1400 so that the leaves produced are healthy and green. Meanwhile, in the second treatment, hydroponic pakchoy plants were given less nutrition than they should be given, namely in the range of 800-1000 PPM so that the leaves produced by hydroponic pakchoy plants wilt due to lack of nutrition. The control devices used in this system include ESP32 as a microcontroller, ESP32 Cam for plant monitoring and digital image processing, pH sensors, and TDS sensors to monitor nutrients in the air. Based on the experimental results, it was found that mustard leaves will be green if the TDS meter value is at an average of 1160.83 PPM with an average error of 5.61% while the pH meter value is at 9.82 with an average error 4.2 %. The percentage value of green detected by image processing is 120.33% with a lower limit of green [35, 21, 63] and an upper limit of green [55, 255, 255]. The Esp32 cam can also process digital images of hydroponic pak choy leaves well.

Automatic Roof Control System in IoT-Based Clothes Drying Room: Sistem Pengendali Atap Secara Otomatis pada Ruang Penjemuran Pakaian Berbasis IoT Yunus, Novia Setya Putri; Sulistiyowati, Indah
Indonesian Journal of Innovation Studies Vol. 13 (2021): January
Publisher : Universitas Muhammadiyah Sidoarjo

One of the problems that often occurs is that housewives are worried about their clothes getting wet in the rainy season. The automatic roof control system in the drying room is the best way to help the process of drying clothes in the rainy season. In this study, roof automation was developed using rain sensors and LDR as light detectors. NodeMCU esp3266 is also used so that the device can be controlled remotely with the Internet of Things system. The way this tool works is when the sun is hot the roof will open and when it rains the roof will close automatically, the heater and fan turn on simultaneously when the roof closes. The results of this study are the tool can detect rain and light then the heater and fan can work when the tool closes the roof with a maximum duration of 60 minutes. This tool can also operate remotely with the farthest range at 21 km.

Electric Bicycle Battery Charging System Design Using Solar Panel: Rancang Bangun Sistem Pengisian Baterai Sepeda Listrik Menggunakan Panel Surya Pratama, Mochamad Rendi; Jamaaluddin, Jamaaluddin; Sulistiyowati, Indah
JEEE-U (Journal of Electrical and Electronic Engineering-UMSIDA) Vol. 8 No. 2 (2024): Oktober
Publisher : Muhammadiyah University, Sidoarjo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21070/jeeeu.v8i2.1698

This solar-powered electric bicycle charging system design and development uses solar panels as a renewable energy source to charge the battery, which drives the electric motor. The system consists of four main components: solar panel, solar charge controller, battery, and electric motor. The solar panels are connected in parallel to generate 36V, which is then stored in the battery. The system is designed to optimize energy harvesting and reduce dependence on fossil fuels. Testing was conducted with research stages, including system design, hardware implementation, and testing. The results show that the system can charge the battery efficiently, with a charging time of 3 hours. The system was also tested under different conditions, including morning, afternoon, and night, to evaluate its performance. It can be concluded that the solar-powered electric bicycle charging system is a viable alternative to traditional fossil fuel-based systems. The system is environmentally friendly, reduces energy dependence, and provides a sustainable solution for transportation. The results of this research can be used to develop a more efficient and sustainable transportation system.

RAT REPELLENT IN RICE FIELDS USING SOUND SENSORS AND SOLAR-POWERED BEN 5M-MFR AUTONIC SENSORS Alfad, Mochamad Alfin Bachtiar; Sulistiyowati, Indah
Journal for Technology and Science Vol. 2 No. 2 (2025): Journal for Technology and Science
Publisher : PT ANTIS INTERNATIONAL PUBLISHER

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.61796/ipteks.v2i2.422

Objective: Rice is a staple food in Indonesia, but pests such as rats and birds often cause significant crop failures. This research developed a technological solution using solar power to deter these pests and optimize yields. Method: The study utilized a research and development approach, testing components such as solar panels, a timer, an FC-04 sound sensor, and an autonic BEN5M-MFR sensor. Results: The results indicate that the sensor can detect pests within a 7m range, triggering ultrasonic waves regulated by the timer to effectively repel rats and birds. The solar panel maintained a consistent 13V throughout the day, and the battery powered the system for 7 hours, demonstrating the viability of the solar-powered design to meet operational requirements. Novelty: This innovation contributes to enhancing food security by mitigating the impact of pests on rice cultivation through the integration of renewable energy technology.

Optimal Power Distribution Strategy for Intermittent Solar-Powered Hybrid Energy Storage Systems: Strategi Distribusi Daya yang Optimal untuk Sistem Penyimpanan Energi Hibrida Bertenaga Surya yang Bersifat Intermiten Indah Sulistiyowati; Jamaaluddin Jamaaluddin; Izza Anshory; Yunardhika Wahyu Pratama; Sahrul Romadhoni
Academia Open Vol. 8 No. 1 (2023): June
Publisher : Universitas Muhammadiyah Sidoarjo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21070/acopen.8.2023.7283

Addressing challenges in solar panel systems, hybrid energy storage systems have gained prominence but face distribution imbalances. This study presents a power distribution approach for hybrid systems in intermittent solar scenarios, leveraging First-Order Filters to allocate power between primary and supporting storage. By employing Lowpass and Highpass First-Order Filters, energy management issues in off-grid systems are addressed. Experimental findings reveal that during high intermittency, the battery stores 387 W and contributes 62 W, while the supercapacitor stores 297 W and contributes 167 W as the primary storage. Conversely, during low intermittency, the battery stores 390 W and contributes 62 W, while the supercapacitor stores 295 W and contributes 164 W. Surprisingly, the supercapacitor doesn't outperform the battery in power efficiency as the primary storage. This work contributes to enhancing the viability of solar-powered hybrid energy storage systems by optimizing power distribution strategies. Highlight: Distribution Imbalances in Hybrid Systems: Hybrid energy storage systems for solar panels face challenges in power distribution, motivating the need for innovative solutions. First-Order Filter Allocation: This research introduces a power distribution approach utilizing First-Order Filters to effectively allocate power between primary and supporting storage in intermittent solar scenarios. Comparative Power Efficiency: Experimental results demonstrate the performance of battery and supercapacitor as primary storage, revealing unexpected power efficiency outcomes under varying solar intermittency, informing strategic energy management decisions. Keywrod: Hybrid Energy Storage, Power Distribution, Intermittent Solar Scenarios, First-Order Filters, Energy Management

A Simple Real-Time Energy Analytics Model for Smart Building Using Open IoT Platforms Muhammad Nasar; Novendra Setyawan; Amrul Faruq; Indah Sulistiyowati
Jurnal Elektronika dan Telekomunikasi Vol. 19 No. 2 (2019)
Publisher : National Research and Innovation Agency

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.14203/jet.v19.83-90

Monitoring energy in buildings can ease us to have a better understanding of electricity consumption patterns to support efficiency and avoid potential damages. However, indoor installations are mostly unmonitored because their panel meters are usually difficult to access. Yet, indoor maintenance tends to be more difficult since the cables are inside the wall, ceiling, or concrete. Internet of Things and big data analytics can be used to track electricity usage either in residential, commercial, or industrial buildings. This paper presents how a simple real-time energy data analytics was built at a low cost and high accuracy to inspect energy fluctuations, anomaly, and its significant pattern. We proposed 3 layers of architecture namely acquisition, transportation, and application management. An electronic module named PZEM004T was used to sense voltage, current, and other electrical parameters. Through a microcontroller ESP8266, the data was processed and sent it to an application layer via an existing wireless network. The actual and historical data of electricity were visualized on high-resolution graphs. The experiment was conducted at our office building. The experimental results showed that data of electrical energy usage can be captured close to realtime and power anomaly and pattern can be figured. Performance and functionality testing showed acceptable use of this system with more than 99% accuracy. This system is intended to empower building managers in evaluating the electrical network balance as well as anticipating damage due to overload, overvoltage, and voltage drop. If this model is widely implemented it will produce big data that is useful for advanced analysis.

Rancang Bangun Sistem Kontrol Mixer Alginate Berbasis Arduino dan Nextion Display Riky Hendra Lesmana; Izza Anshory; Indah Sulistiyowati; Jamaaluddin Jamaaluddin
Jurnal Otomasi Kontrol dan Instrumentasi Vol 18 No 1 (2026): Jurnal Otomasi Kontrol dan Instrumentasi
Publisher : Pusat Teknologi Instrumentasi dan Otomasi (PTIO) - Institut Teknologi Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.5614/joki.2026.18.1.9

This study aims to design and implement an Arduino-based alginate mixer control system with Nextion Display as the user interface. This system was developed to improve the accuracy of mixing time and maintain the consistency of mixing results in the production process. The method used is a design with an experimental approach through testing several variations of stirring time and comparison with a conventional manual timer-based system. The parameters observed include time error and viscosity values of the mixing results. The test results show that the Arduino-based system has better time accuracy with smaller and more stable error values. This has an impact on more consistent viscosity results, which values obtained are in the range of 100–110 dPa·s according to process standards. In addition, the developed system also provides ease of operation and monitoring through real-time displays on the Nextion Display. Thus, this system can be a more effective alternative compared to conventional systems in the alginate mixing process.

Automatic Steering System on The Prototype Electric Car UMSIDA Indah Sulistiyowati; Miftachur Rifki Antoni
JEECS (Journal of Electrical Engineering and Computer Sciences) Vol. 1 No. 2 (2016): JEECS (Journal of Electrical Engineering and Computer Sciences)
Publisher : Fakultas Teknik Universitas Bhayangkara

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.54732/jeecs.v1i2.176

Currently the electronic device can not be separated from human life, especially is the gadget. Gadgets in daily activities is almost inseparable from our grasp, from children to adults. Many devices are now directly connected with android smartphone. Hence the idea to do some research occurred android smartphone is connected to a steering system of the car. In this case study is used as a prototype electric car UMSIDA. Here we create an electronic circuit that we put on the car steering system, which by using blutooth connection connects to an android smartphone that we use. As for the electronic devices we use Arduino is programmed using C language to run the motor that moves according to the input data transmitted via android smartphone. Where the results of tests show that the speed turns on bluetooth pairing process is more influenced by the android version and hardware high.

Co-Authors Achmad Fatchur Rochman, Achmad Fatchur Achmad Ifan Permana Achmad Yahya Chanifudin Adam, Mochammad Rizki Adhimanata, Yogi Agung Wahyu Hidayat Agus Hayatal Falah Agus Hayatalfalah Ahlul A'raaf Femas Salsabil Ahmad Ahfas Ahmad Ahfas Ahmad Rifandi Ahmad Yovi Nurulfahmi Ahmad Yovi Nurulfahmi Akhmad Ahfas Akhmad Nurfaizi Alawi, Nuril Alfad, Mochamad Alfin Bachtiar Ali Akbar Ali Mahfud Roziqin Aliffudin, Muchammad Amrul Faruq Amrul Faruq Andri, Dwi Andriyanto Anwar, Dimas Hijjul Arga Rachmanda Putra Arief Wicaksana Arief Wicaksono, Arief Arief Wisaksono Atho Akmal Al Fais Bagas Dewantara Cholilurrohmana Cholilurrohmana Desyandri Desyandri Dwi Hadidjaja Rasjid Saputra Edi Widodo Edi Widodo, Edi Efendi, Muhammad Taufik Nur Exsavator Dwiryanto Putra FahrizaI Akbarlillah Perdana Buana Faris, Faisal Fitri Nur Latifah fudin, muchammad alif Hafidz Maulana Ichsan Hafidz, Miftah Nur Hariska Ade Pratama I Dewa Made Juniarta Putra I Made Fredy Nuryasa Ilhamzah, Triansyah Izza Anshory Jainul, M Jamaaluddin Jamaaludin Laksono Hadi, Moch. Faizal Lukman Hudi Mahardika, Joar Yahdi Maulana Ichsan, Hafidz Maydia Anggraeni, Putri Miftachur Rifki Antoni Mochammad Hisam Zulwidad Mochammad Syeh Maulana Mochammad Syeh Maulana Moh Imam Muhyiddin Mohamad Muchtarul Hadist Mohammad Amar Juliyanto Mohammad Tetuko Putra Mulana Muh Arul Romadhon Muhamad Husaini Muhammad Irsyad Hidayatullah Muhammad Khafid Amrulloh Muhammad Nasar Muhammad Nauval Khoiron Hamdani Muhammad Nur Fahmi Febriansyah Muhammad Syaiful Azis Nanggala, Dikas Pandu Negara, Fatahilah Ikra Novendra Setyawan Nur Muhammad Abdillah Nurfaizi, Akhmad Pian pian Prasetiyo Budi Megantoro Pratama, Mochamad Rendi Pratama, Yunardhika Wahyu prayogo, rio Prayudha, Mufit Yogie Putra, Arga Rachmanda Putra, Mochamad Wildan Karyono RAGIL FANNY SETIYA AJI, RAGIL Ragil Ragil Fanny Setiya Aji Rakhmad Fajar Ashari Rasjid Saputra, Dwi Hadidjaja Riky Hendra Lesmana Rina Astini Rio Prayogo Riski Virmansah Rivaldi Azis Sabarto Rizqiyah, Mar'ati Amalia Rohman, Rizky Habibur Romadhoni, Sahrul Rossoleh, Andriyan Herqi Rosyidah, Izzah Sahrul Romadhoni saputro, galib asbie Shazana Dhiya Ayuni Shinta Carolin Stevi Yanti Siddiq, Wahyu Ja'far Syahrorini, Syamsudduha Syamsudduha Syahrorini Syamsuduha Syahrorini Vedy Hardino wahyu ja’far siddiq wildan arief prasetyo Yanuar Gustiyandi Yunardhika Wahyu Pratama Yunus, Novia Setya Putri Zainal Arifin Zidan Nur Fauzan

Title

Found 101 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 101 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 101 Documents
Search