Claim Missing Document
Check
Articles

Found 29 Documents
Search

Morphometric characteristics of Lake Limboto as critical lake in Gorontalo Province, Indonesia YUNGINGER, RAGHEL; PATUTI, INDRIATI MARTHA; SUPU, IDAWATI; GAFUR, NURFITRI ABDUL; ZULKIFLI, MUHAMMAD; HASAN, ELFIRAWATI; MASRURAH, ZAKIA; ZULAIKAH, SITI; TISEN, TISEN
Jurnal Natural Volume 24 Number 2, June 2024
Publisher : Universitas Syiah Kuala

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24815/jn.v24i2.34071

Abstract

This research aims to investigate the factors leading to siltation in Lake Limboto by analyzing its morphometric characteristics gathered through direct field measurements and remote sensing using Geographic Information System (GIS). Lake Limboto covers an approximate surface area of 26.09 square kilometers, boasts a maximum depth of 4 meters, and maintains an average depth of 2.83 meters. The Shoreline Development Index (SDI) stands at approximately 2.57, indicating an irregular shape of the lake's water body, while the Lake Volume Development (VD) index, at 2.12, suggests a generally flat lake bottom. The Relative Depth (Zr) registers at around 0.69%, as observed from the water turbidity level. The lakebed relief in the vicinity of the lake's periphery is predominantly flat and shallow, particularly in the western, northern, and southern regions, with depths measuring less than 2 meters. In contrast, the lakebed relief in the central and eastern sections tends to be less flat but still features depths of less than 4 meters. Siltation in Lake Limboto primarily results from high sediment input originating from erosion processes, agricultural activities, and settlements in the surrounding area.
Analysis of Magnetic Susceptibility in Vertical Sediments in the Fish Pond Area of Limboto Lake Tang, Bunga; Yunginger, Raghel; Yunus, Muhammad; Patuti, Indriati Martha; Gafur, Nurfitri Abdul; Jahja, Mohamad; Ramadani, Andi Indra Wulan Sari; Meidji, Icha Untari; Supu, Idawati
Jurnal Pijar Mipa Vol. 19 No. 6 (2024): November 2024
Publisher : Department of Mathematics and Science Education, Faculty of Teacher Training and Education, University of Mataram. Jurnal Pijar MIPA colaborates with Perkumpulan Pendidik IPA Indonesia Wilayah Nusa Tenggara Barat

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29303/jpm.v19i6.7829

Abstract

Limboto Lake is one of the lakes in Indonesia that has been degraded due to sedimentation and waste disposal, which will affect the lake ecosystem and its surroundings. This research aims to analyze the Magnetic Susceptibility in Vertical Sediments in the fish pond area of ​​Limboto Lake. Efforts must be made to trace sediment's contribution, which is controlled by lithogenic and anthropogenic components. Vertical sediment samples from Fish Ponds in Limboto Lake were taken at one point with a depth of 15 meters using an XY-1A Spindle drilling machine. This type of research uses survey techniques and laboratory tests that use rock magnetism methods, especially susceptibility parameter analysis using the Bartington MS2 susceptibility meter instrument at a low frequency of 470 Hz and a high frequency of 4700 Hz to obtain information on the concentration of magnetic minerals. The sediment samples tested did not go through preparation, such as sieving and drying, but the unsifted samples were put into the plastic holder to analyze the susceptibility magnetic parameter. The measurement results show that the low-frequency magnetic susceptibility (XLF) value ranges from 1.11 x 10-8 m3/kg to 9.68 x 10-8 m3/kg. The concentration of magnetic minerals in this sample contains paramagnetic minerals, and based on the XFD % value, which ranges from 0.206% to 4.714% with an average value of 1.170%, the magnetic minerals in the samples tend to be dominated by coarse-grained non-superparamagnetic minerals (>0.03 µm) and tend to occupy stable single-domain (SSD) and multi-domain (MD) domains. Magnetic susceptibility parameters tested using sediment samples without going through a sieving process can be used to determine sediment characteristics in lake areas that tend to be controlled by anthropogenic components.
KARAKTERISTIK FISIKA MIKROPLASTIK PADA AIR DAN IKAN MUJAIR (Oreochromis mossambicus) DI DANAU LIMBOTO Ismail, Sri Yanti N.; Jahja, Mohamad; Ramadani, A Indra Wulan Sari; Supu, Idawati; Arbie, Asri; Kurniasari, Septiana; Gafur, Nurfitri Abdul
BIOCHEPHY: Journal of Science Education Vol. 5 No. 1 (2025)
Publisher : MO.RI Publishing

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.52562/biochephy.v5i1.1473

Abstract

Mikroplastik merupakan salah satu jenis pencemaran yang berbahaya baik di darat maupun ekosistem perairan. Dengan menurunnya kualitas perairan merupakan salah satu permasalahan yang berada pada lingkungan danau Limboto yang disebabkan oleh pencemaran dan pendangkalan kondisi danau Limboto saat ini sangat memprihatinkan. Penelitian ini bertujuan untuk mengetahui karakteristik mikroplastik yang terkandung pada air dan ikan mujair (Oreochromis mossambicus)  pada perairan Danau Limboto.  Penelitian ini menggunakan alat mikroskop USB Traveler untuk mengidentifikasi bentuk dan warna mikroplastik. Berdasarkan hasil penelitian yang dilakukan Mikroplastik yang ditemukan pada air dan ikan mujair yaitu fiber, pellet dan fragmen. Warna mikroplastik pada ikan mujair dan air danau Limboto berwarna hitam, biru, kuning, hijau, merah cokelat dan putih.
Synthesis and Characterization of ZnO Semiconductor Nanoparticles with Annealing Temperature Variation for Dye Synthesized Solar Cell Application Supu, Idawati; Aulia Fitrah Ramadhani; Bunga Tang; Haerul Ahmadi; Dewa Gede Eka Setiawan
EKSAKTA: Berkala Ilmiah Bidang MIPA Vol. 25 No. 03 (2024): Eksakta : Berkala Ilmiah Bidang MIPA (E-ISSN : 2549-7464)
Publisher : Faculty of Mathematics and Natural Sciences (FMIPA), Universitas Negeri Padang, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24036/eksakta/vol25-iss03/467

Abstract

This study aims to make ZnO semiconductor nanoparticles using annealing temperature variations for dye synthesized solar cells, identify the structure and particle size and surface morphology using SEM-EDX and UV-VIS to determine the wavelength and absorbance values. In the gel-combustion method, three samples were made with varying annealing temperatures of 700⁰C, 800⁰C, and 900⁰C, respectively. The annealing temperature variation shows the difference in SEM test results, where the higher the annealing temperature, the smaller the particle size. EDX test results show that ZnO has been formed. In the UV-VIS characterization results for the three samples have different transmittance values and wavelengths from samples without dye, ZnO doping chlorophyll. Based on XRD data, the higher the calcination temperature, the smaller the particle size, and the distribution of particle size at each increase in annealing temperature. Based on the results of SEM analysis obtained that the particle size is getting smaller with increasing annealing temperature.  According to the UV-Vis analysis results obtained that the addition of chlorophyll extract does not have a significant effect about wavelength 370 nm on the transmittance value of each sample, so the best absorbance is owned by the ZnO doping dye sample.
Analisis Struktur Morfologi dan Sifat Mekanik Paving Block dari Berbagai Jenis Polimer Limbah Plastik Yita Irmala Sari; Idawati Supu; Mursalin Mursalin; Muhammad Fachrul Latief; Dewa Gede Eka Setiawan; A. Indra Wulan Sari Ramadani; Haerul Ahmadi
Jurnal Fisika Flux: Jurnal Ilmiah Fisika FMIPA Universitas Lambung Mangkurat Vol 22, No 2 (2025): Jurnal Fisika Flux: Jurnal Ilmiah Fisika FMIPA Universitas Lambung Mangkurat
Publisher : Lambung Mangkurat University Press

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20527/flux.v22i2.21418

Abstract

Penelitian ini menganalisis perbedaan ketiga jenis plastik yakni polimer PET, HDPE dan LDPE dalam pembuatan paving block dengan meninjau sifat mekanik (uji daya serap dan uji kuat tekan) dan struktur morfologinya. Pembuatan paving block pada penelitian ini menggunakan alat press dengan tekanan 25 bar campuran terbuat dari beberapa jenis plastik (PET, HDPE, dan LDPE) dan kerikil sebagai filler dengan masing-masing perbandingan massa secara berurutan adalah 30% : 70% ; 50% : 50% ; 70% : 30%; dan 100% plastik. Hasil pengujian daya serap menunjukkan bahwa hasil yang didapatkan memenuhi Standar SNI mutu A untuk semua jenis paving block. Sedangkan untuk hasil uji kuat tekan paving block dengan nilai kuat tekan paling tinggi yaitu perbandingan 70% plastik dan 30% kerikil yang terbuat dari polimer HDPE dan LDPE berturut-turut adalah 19,83 MPa (Standar  SNI mutu B) dan 12,56 MPa (Standar SNI mutu C). Hasil SEM menunjukkan bahwa paving block yang terbuat dari jenis polimer PET dan LDPE mempunyai struktur morfologi berbentuk granular dan kerapatan massa jenis yang kecil. Sedangkan untuk paving block yang terbuat dari jenis polimer HDPE menunjukkan distribusi partikel yang merata dan adhesi yang kuat ( terutama ikatan area persambungan antara kerikil dan plastik) sehingga mengurangi resiko titik lemah dan meningkatkan daya tekan mekaniknya. kesimpulan dari penelitian ini adalah hasil uji kuat tekan dan daya serap yang paling baik adalah pavin block yang terbuat dari jenis polimer HDPE.
Analisis Sifat Fisik Bioselulosa Berbahan Dasar Limbah Pulp Kakao Eka Pratiwi Tenriawaru; Pauline Destinugrainy Kasi; Idawati Supu
Cokroaminoto Journal of Biological Science Vol. 2 No. 1 (2020): Agustus 2020
Publisher : Universitas Cokroaminoto Palopo

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Penelitian ini bertujuan untuk mengetahui sifat fisik bioselulosa yang diproduksi dengan menggunakan bahan dasar limbah pulp kakao. Sifat fisik yang diamati meliputi berat basah, ketebalan nata, rendemen selulosa, dan struktur selulosa yang dihasilkan. Penelitian ini menggunakan Rancangan Acak Lengkap dengan tiga perlakuan dan masing-masing tiga kali pengulangan. Perlakuan terdiri atas lama penyimpanan pulp kakao (limbah pulp kakao segar, limbah pulp kakao yang disimpan 3 hari, dan limbah pulp kakao yang sudah disimpan 5 hari. Hasil penelitian menunjukkan bahwa limbah pulp kakao yang terbentuk berwarna kuning keruh. Bioselulosa yang paling tebal dan berat basah tertinggi dijumpai pada perlakuan limbah pulp yang disimpan selama 3 hari (1,11 cm dan 446,33 g). Rendemen selulosa tertinggi (31,87%) diperoleh pada limbah pulp segar. Bioselulosa dari limbah pulp kakao terdapat senyawa SiO2, SO3, K2O, dan Na2O
Pemberdayaan Masyarakat Pesisir Melalui Pemanfaatan Limbah Cangkang Telur Sebagai Pupuk Organik di Desa Bumbulan, Kecamatan Paguat, Kabupaten Pohuwato Risna Podungge; Gamar Abdullah; Sulasikin Sahdi Kadir; Citron Payu; Idawati Supu
Jurnal Sibermas (Sinergi Pemberdayaan Masyarakat) Vol 13, No 1 (2024): Jurnal Sibermas (Sinergi Bersama Masyarakat)
Publisher : Universitas Negeri Gorontalo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.37905/sibermas.v13i1.23239

Abstract

Empowering coastal communities through the use of eggshell waste as organic fertiliser is the development and application of innovations and technologies that are directly useful to the community to improve the quality of life and community independence. The features of the use of eggshell waste as organic fertiliser include producing new environmentally friendly natural composite materials and supporting the idea of utilising eggshell waste into products that have high economic and technological value. The business of using eggshell waste as raw material for making organic fertiliser changes the form of the primary product into a new product. The purpose of this activity is that it is hoped that the community, especially those who work as farmers, can make organic fertiliser independently whose use is more economical and environmentally friendly.
Vertical Sediment Drilling Technique in Fish-Pond Areas of Lake Limboto Muhlis Ali; Raghel Yunginger; Septiana Kurniasari; Indriati Martha Patuti; Idawati Supu; Nurfitri Abd Gafur; Mursalin Mursalin; Mohamad Jahja; Andi Indra Wulan Sari Ramadani
BIOCHEPHY: Journal of Science Education Vol. 6 No. 1 (2026)
Publisher : MO.RI Publishing

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.52562/biochephy.v6i1.1906

Abstract

Lake Limboto in Gorontalo is an essential ecosystem for local communities, particularly fishermen, yet fish-pond activities have increased sedimentation and accelerated the lake's degradation. Effective conservation efforts require sediment-characterization analysis, including vertical sediment profiles in pond areas, which has been limited by the lack of appropriate drilling techniques. This study aims to evaluate a vertical sediment-sampling technique in fish-pond zones using a survey method and shallow drilling with an XY-1A spindle-type drilling machine at depths of 1–15 meters. The results indicate that drilling stability is strongly influenced by the structural integrity of the machine's support base, particularly due to water currents and waves in the lake. This drilling technique is recommended for sediment sampling in Lake Limboto, especially in pond areas, and contributes to the advancement of sediment-drilling methods in similar aquatic environments.
Mechanical Study of Paving Block Based on High Density Polyethylene (HDPE) Polymer With The Addition of Natural Fiber Filler (Rice Husk, Silica Sand and Sugar Cane Bagassa) Syahdad Aziz; Mursalin Mursalin; Muh. Fachrul Latief; A. Indra Wulandari Ramadani; Setiawan Dewa Gede Eka; Idawati Supu
BULETIN FISIKA Vol. 27 No. 2 (2026): BULETIN FISIKA
Publisher : Departement of Physics Faculty of Mathematics and Natural Sciences, and Institute of Research and Community Services Udayana University, Kampus Bukit Jimbaran Badung Bali

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24843/BF.2026.v27.i02.p07

Abstract

This research has succeeded in making HDPE polymer-based paving blocks with the addition of natural fiber fillers consisting of 3 types, namely rice husks, bagasse, and silica sand. The aim is to see the composition and mechanical properties of the best paving blocks with HDPE plastic waste as a polymer. The method used in this research is experimental, namely making paving blocks directly as the main approach, then analyzing their mechanical properties. The composition ratio between the polymer and the filler consists of 30%, 70%, 50%, 50% and 70%, 30%, respectively. The samples that were successfully made were then tested (compressive strength, porosity) and characteristic tests (Scanning Electron Microscope (SEM) and X-Ray Fluorescence (XRF).