Claim Missing Document
Check
Articles

LMS Affects Teaching Effectiveness: Depending on LMS Platforms, Lecturer Qualification, and Lecturer Age Olii, Djami; Manoppo, Christine; Mamahit, Calvin; Abast, Metri
Jurnal Pendidikan Progresif Vol 13, No 2 (2023): Jurnal Pendidikan Progresif
Publisher : FKIP Universitas Lampung

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

LMS Affects Teaching Effectiveness: Depending on LMS Platforms, Lecturer Qualification, and Lecturer Age. The ability of lecturers to manage the LMS affects the effectiveness of their teaching. Each LMS platform has differences in the user interface and the available features. Educational qualifications and the age of lecturers affect the mastery of LMS applications. So, the type of LMS platform, educational qualifications, and age of the lecturers affect teaching effectiveness. Objective: This study aims to examine the effects and comparisons between the three groups. Methods: The comparison of the LMS platform group consists of Moodle and Google Classroom; the educational qualification group consists of master's and doctoral degrees; and the age group is ≤ 45 years and > 45 years. Findings: The analysis results with the three-way ANOVA found that the three groups had an interaction effect of 74% on the effectiveness of their teaching. Conclusion: LMS Moodle, doctoral educational qualifications, and younger lecturers (≤45 years) have a higher average of lecturer teaching effectiveness. Keywords: LMS, learning management system, lecturer qualification, lecturer age, teaching effectiveness.DOI: http://dx.doi.org/10.23960/jpp.v13.i2.202341
Desain dan Analisis Pencahayaan Gedung Bengkel Universitas Negeri Manado Mamahit, Calvin; Pangestu, Prayogi
ELECTRON Jurnal Ilmiah Teknik Elektro Vol 5 No 1: Jurnal Electron, Mei 2024
Publisher : Jurusan Teknik Elektro Fakultas Teknik Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/electron.v5i1.72

Abstract

Tujuan dari penelitian ini adalah untuk mendesain dan menganalisis pencahayaan Gedung Bengkel Universitas Negeri Manado. Penerangan alami dan buatan diperlukan untuk aktivitas manusia sehari-hari di luar dan di dalam bangunan. Penerangan harus memenuhi standar yang dituangkan dalam SNI dan Peraturan Menteri Kesehatan No. 70 Tahun 2016 tentang Standar Intensitas Cahaya. Salah satu tujuan penerangan gedung adalah untuk memberikan penerangan yang cukup sekaligus mengurangi bahaya kecelakaan. Berdasarkan uraian tersebut, penulis tertarik untuk mempelajari lebih lanjut dan menyelidiki standar pencahayaan yang ada pada fasilitas bengkel UNIMA saat ini. Penulis menggunakan survei dan analisis kebutuhan, kemudian melakukan pengembangan dengan merancang kebutuhan penerangan. Hasil perancangan tersebut langsung diimplementasikan pada proyek instalasi penerangan, lalu kembali dianalisis keefektifan dan efisiensi penerangan itu. Penulis memperoleh data penelitian untuk evaluasi dengan melakukan studi kasus dimana data dikumpulkan, diolah, dibandingkan, dan dievaluasi. Penulis menggunakan teori dasar dimana intensitas cahaya berbanding lurus dengan fluks cahaya, jumlah titik pasang, dan rugi-rugi cahaya, serta berbanding terbalik dengan luas ruangannya. Ada tujuh ruangan yang dianalis, yaitu lima ruang pendukung, satu ruang kerja utama, dan ruang toilet. Hasil penelitian menunjukkan intensitas cahaya pada ruang bengkel UNIMA rata-rata 144,2 lux dan area kerja 191,06 lux. Perhitungan serta analisis banyaknya lampu yang dipakai supaya terpenuhi kriteria SNI, adalah 54 LED bervariasi daya 10, 22, 20, dan 40 watt
Wireless Residential Electric Controller Using Arduino Uno and Bluetooth Module HC-05 Nelwan, Allan; Manembu, Pinrolinvic; Wauran, Alfrets; Manoppo, Franky; Mamahit, Calvin
JURNAL EDUNITRO Jurnal Pendidikan Teknik Elektro Vol. 3 No. 1 (2023): April Issue
Publisher : Department of Electrical Engineering Education, Faculty of Engineering, State University of Manado

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.53682/edunitro.v3i1.5408

Abstract

This research aims to design electrical installations in residential homes that apply Internet of Things (IoT) technology. An Arduino Uno mini system is the controller whose interface uses the HC-05 Bluetooth module. At the same time, the control uses a cellphone with the Android operating system. The design is based on a research development model, but it is not fully standardized by development research because there are some limitations to the problem. The focus is only on tool design, namely planning, manufacturing, and testing the resulting tool or device. The design results obtained an electrical installation control device with an Android phone. The device is capable of connecting and disconnecting load points remotely and automatically. The control distance is approximately 20 meters according to the Bluetooth specifications used.
Implementation of Contextual Learning Improves the Lighting Installation Learning Outcomes of Students of SMKN 1 Tomohon Mamahit, Calvin; Sumual, Herry; Kembuan, Eddy; Makaliwe, Fransiska
JURNAL EDUNITRO Jurnal Pendidikan Teknik Elektro Vol. 4 No. 2 (2024): October Issue
Publisher : Department of Electrical Engineering Education, Faculty of Engineering, State University of Manado

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.53682/edunitro.v4i2.9835

Abstract

This study is expected to improve learning outcomes. Electrical lighting installation for grade XII students using a contextual learning model during the 2022–2023 academic year. The study was conducted in two cycles, with planning, implementation, action, observation/evaluation, and reflection as components of each cycle. This study involved 30 grade XII TITL students. The collected data were analyzed through test techniques. It was analyzed using qualitative descriptive techniques. The results of the study showed that the average student learning outcomes in cycle 1 in the electrical lighting installation component were 67.4% in the moderate category, which in cycle 2 increased to 80% in the high category, indicating an increase of 85.66%. Thus, the contextual learning model has been proven to improve the learning outcomes of grade XII TITL students at SMKN 1 Tomohon in the 2022–2023 academic year.
Blended model of distance learning: Does it effective? Mamahit, Calvin Johanes
Jurnal Pendidikan Teknologi Kejuruan Vol 3 No 4 (2020): Regular Issue
Publisher : Universitas Negeri Padang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24036/jptk.v3i4.15223

Abstract

This study aims to determine whether distance learning is effective to implement. This study compares the blended model of distance learning with traditional learning. What is being compared is student learning outcomes and their perceptions in these two lessons. This research is a quantitative study using a quasi-experimental research design with a time-series model. The population of this research is all 4th-semester students who take Digital Electronics courses. Data collection was carried out in two ways, namely by using several tests for data on learning outcomes and questionnaires for student perception data. Data analysis was made using the t-test for paired samples. The results of the analysis obtained that there are differences in the two samples tested mean and the distance learning blended model has a higher average than traditional learning. This shows that the blended model of distance learning is more effective than traditional learning.
The development of movement system of the second six-legged robot PTE UNIMA Mamahit, Calvin E J; Sanggola, Mildes
Jurnal Pendidikan Teknologi Kejuruan Vol 4 No 4 (2021): Regular Issue
Publisher : Universitas Negeri Padang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24036/jptk.v4i4.21323

Abstract

Engineering technology in robotics for the present era is no longer new, especially in high education, marked by Indonesian robot contests routinely held annually by the national achievement center. The participants in this event are groups of students from all higher education institutions spread throughout Indonesia. The development of robotics technology is now faster to spur individuals and students to compete to conduct research and development in robotics. The study aims to develop a six-legged robotic motion system or so-called hexapod. The research was conducted using the Addie model research method consisting of five stages, namely, analyze stage to analyze the needs of the development of the robotic motion system and analysis of the needs of tools and materials to be used. The design stage of designing the mechanical structure of the robot both in terms of hardware and in terms of robot software, the development stage of developing a six-legged robot's motion system to be more stable and more efficient in moving, the implementation stage is a test stage of the robot's motion system that has been developed. The evaluation stage is the last stage of this development research; at this stage, the evaluation is done to ensure the robot's motion system is feasible to use.
Analisis Potensi Energi Listrik Ditinjau dari Energi Hidro di Minahasa Selatan Mamahit, Calvin; Ponto, Hantje
JURNAL EDUNITRO Jurnal Pendidikan Teknik Elektro Vol. 1 No. 1 (2021): April Issue
Publisher : Department of Electrical Engineering Education, Faculty of Engineering, State University of Manado

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.53682/edunitro.v1i1.1008

Abstract

Abstrak < strong>Penelitian ini dilakukan dengan tujuan untuk menghitung penurunan daya listrik yang dapat dihasilkan oleh Pembangkit Listrik Tenaga Mikro Hidro yang ada di Sungai Ongkaw Penurunan daya listrik pada PLTMH sungai Ongkaw ini diakibatkan oleh adanya sedimen yang menumpuk pada bendung PLTMH sehingga berkurangnya debit air yang dapat dialirkan ke pipa penstock< em> untuk membangkitkan daya listrik Dalam penelitian ini dilakukan perhitungan debit andalan Sungai Ongkaw yang didapat dari pengolahan data debit Sungai Ongkaw selama 3 bulan dengan menggunakan metode FDC Flow Duration Curve < em> perhitungan daya listrik terbangkit dari debit rencana pada PLTMH Ongkaw perhitungan penurunan daya listrik pada PLTMH Ongkaw Dari hasil penelitian didapat nilai debit rencana PLTMH Ongkaw adalah sebesar 0 2565 m3 s dengan daya terbangkit sebesar 2 3742 kW Penurunan daya dihitung berdasarkan pengukuran yang dilakukan sebanyak 2 kali Pada debit terukur sungai sebesar 1 1923 m3 s air yang dapat dialirkan ke pipa setinggi 7 cm menghasilkan debit sebesar 0 0592 m3 s Daya yang dapat dihasilkan sebesar 1 2326 kW atau sebesar 56 12 dari rencana daya terbangkit Pada debit terukur sungai sebesar 0 5788 m3 s air yang dapat dialirkan ke pipa setinggi 4 cm menghasilkan debit sebesar 0 0189 m3 s Daya tidak dapat lagi dihasilkan karena debit tersebut tidak dapat lagi memutar turbin < p>
Smart Home with Voice Control Lights Using Arduino Uno R3 Mamahit, Calvin; Wauran, Alfrets; Manoppo, Franky; Seke, Fransiskus; Ticoh, Janne
JURNAL EDUNITRO Jurnal Pendidikan Teknik Elektro Vol. 3 No. 2 (2023): October Issue
Publisher : Department of Electrical Engineering Education, Faculty of Engineering, State University of Manado

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.53682/edunitro.v3i2.6792

Abstract

The development of science and technology has positively impacted human life which has now reached the age of electric voice commands An intelligent home management system allows humans to operate their house s electrical gadgets such as lighting using simple voice commands eliminating the need to move around to switch on or off equipment When users of indoor lighting use sound waves to operate the system or turn on the lights the sound sensor sends an input signal to the microcontroller which is then processed with the microcontroller s output in the form of a voltage to turn on the load The system will function when the FC 04 sound sensor receives sound input sound code The FC 04 sound sensor can only provide a digital output signal with a value of 1 and 0 in the form of a clap which is then accumulated on Arduino with a value above 400 million by the program uploaded to be used as a 5 volt output to turn on off the lights This is because when turning on the lights from a certain distance several factors can affect it including setting the sound sensor s sensitivity and noise levels in the surrounding area < p>
Perancangan Sistem Otomasi Penyiraman Pestisida Menggunakan Sensor Ultrasonik Berbasis IoT Walukow, Timothy; Mamahit, Calvin; Ticoh, Janne
JURNAL EDUNITRO Jurnal Pendidikan Teknik Elektro Vol. 5 No. 2 (2025): October Issue
Publisher : Department of Electrical Engineering Education, Faculty of Engineering, State University of Manado

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.53682/edunitro.v5i2.12681

Abstract

Abstrak Penggunaan pestisida secara manual pada tanaman hortikultura seperti kubis sering menimbulkan masalah efisiensi waktu ketidakakuratan penyemprotan serta risiko kesehatan bagi petani Seiring dengan perkembangan teknologi Internet of Things IoT diperlukan inovasi sistem semprot otomatis yang mampu meningkatkan efektivitas penyemprotan dan mengurangi paparan bahan kimia secara langsung Penelitian ini bertujuan untuk merancang dan mengimplementasikan alat penyemprotan pestisida otomatis berbasis IoT menggunakan sensor ultrasonik HC SR04 dan mikrokontroler NodeMCU ESP8266 yang terintegrasi dengan aplikasi Blynk sebagai kontrol jarak jauh Metode yang digunakan adalah pendekatan rekayasa eksperimental meliputi perancangan sistem perakitan komponen dan pengujian kinerja sensor relay pompa serta komunikasi data Hasil pengujian menunjukkan bahwa sensor HC SR04 memiliki akurasi tinggi dengan deviasi rata rata 0 18 cm pompa bekerja optimal dalam rentang jarak 10 20 cm dan aplikasi Blynk mampu memberikan kontrol responsif dengan waktu tunda kurang dari 1 detik Evaluasi oleh ahli menunjukkan tingkat kelayakan sistem sebesar 92 Penelitian ini membuktikan bahwa sistem penyemprotan pestisida otomatis berbasis IoT dapat berfungsi efektif dan fleksibel untuk mendukung pertanian presisi Implikasi dari penelitian ini adalah potensi penerapan teknologi serupa dalam skala yang lebih luas guna meningkatkan produktivitas dan keamanan pertanian di era digital < p>
Desain Laboratorium Virtual Berbasis IoT untuk Pembelajaran Elektronika Mamahit, Calvin; Pardanus, Rudy
JURNAL EDUNITRO Jurnal Pendidikan Teknik Elektro Vol. 6 No. 1 (2026): April Issue
Publisher : Department of Electrical Engineering Education, Faculty of Engineering, State University of Manado

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.53682/322k1x31

Abstract

Abstrak— Penelitian ini dilatarbelakangi oleh keterbatasan fasilitas laboratorium fisik dalam praktikum elektronika dan kebutuhan akan solusi daring yang interaktif melalui Internet of Things (IoT). Tujuan penelitian adalah merancang, mengimplementasikan, dan mengevaluasi prototipe laboratorium virtual berbasis IoT untuk meningkatkan efektivitas pembelajaran praktikum. Metode yang digunakan adalah design‑based research dengan model mixed methods—meliputi analisis kebutuhan, perancangan sistem, implementasi prototipe, pilot testing, serta evaluasi kuantitatif (nilai kuis, praktikum, ujian) dan kualitatif (wawancara, FGD, observasi). Temuan menunjukkan peningkatan rata‑rata nilai eksperimen sebesar 8 poin dibanding metode konvensional, skor kepuasan pengguna tinggi (4,31/5), waktu respon sistem cepat (1,2 detik), dan interaksi intensif (150 kali per sesi). Kontribusi penelitian meliputi model inovatif laboratorium virtual IoT yang user‑friendly, dashboard real‑time, serta rekomendasi integrasi AI dan fitur kolaboratif untuk pembelajaran teknik yang lebih fleksibel, inklusif, dan adaptif.