Claim Missing Document
Check
Articles

Found 35 Documents
Search

RANCANG BANGUN INVERTER 3 FASA SEBAGAI PENGENDALI KECEPATAN MOTOR INDUKSI 3 FASA 1/2HP 0.37KW MENGGUNAKAN METODE SPWM BERBASIS ARM MIKROKONTROLER (STM32F4) Achmad Efendi Setiawan; Tjahya Odinanto; Syahri Muharom
Prosiding Seminar Nasional Sains dan Teknologi Terapan Inovasi Teknologi Infrastruktur Berwawasan Lingkungan
Publisher : Institut Teknologi Adhi Tama Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Pengendalian kecepatan motor induksi tiga fasa ini membutuhkan modul Inverter. Inverter terdiri dari saklar semikonduktor atau transistor yang disusun sedemikian rupa, dan memerlukan sinyal kendali yang digunakan untuk mengatur nyala-mati saklar semikonduktor tersebut. Metode untuk merubah sinyal analog menjadi durasi nyala atau mati tersebut adalah Pulse Width Modulation (PWM). Pada proyek akhir ini akan dilakukan pengaturan kecepatan motor induksi tiga fasa menggunakan metode Sine Wive Pulse With Modulation (SPWM). Implementasi control tersebut dilakukan pada mikrokontroler ARM Mikrokontroler STM32F4 untuk mengatur pulsa melalui switching Inverter. Sumber AC dari jala-jala akan diubah menjadi sumber DC oleh rangkaian rectifier untuk masukan Inverter. Kemudian Inverter akan mengubah sumber DC menjadi sumber AC untuk mensuplai motor induksi tiga fasa. Metode SPWM diimplementasikan untuk mencari nilai Frekuensi dari selisih antara Frekuensi referensi dan Frekuensi estimasi. Hasil menunjukkan bahwa kecepatan dengan set point 300 RPM, merupakan respon kecepatan motor dimana nilai kecepatan motor yang dihasilkan hampir sama dengan nilai set  point  kecepatan  yang telah  ditentukan yaitu dengan kecepatan 298.2 RPM, error yang dihasilkan adalah 0,6036%.
Rancang Bangun Sistem Penyiram Tanaman Bawang Merah Secara Otomatis Syahri Muharom; Heru Suseno; Surya Adhi Setyawan
Prosiding Seminar Nasional Sains dan Teknologi Terapan 2019: Menuju Penerapan Teknologi Terbarukan pada Industri 4.0: Perubahan Industri dan Transformasi P
Publisher : Institut Teknologi Adhi Tama Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Teknologi saat ini dapat dikembangkan untuk proses tumbuh kembang tanaman bawang merah. Sistem penyiraman otomatis berdasarkan nilai kelembapan tanah, Sensor kelembapan tanah ini memiliki tiga range berbeda yang menjadi acuan untuk membedakan kondisi tanah yakni nilai 0-25% kategori tanah kering, untuk nilai 26-40% tersebut termasuk lembap, sedangkan nilai 41-100% termasuk dalam kategori tanah basah. Sistem ini dirancang untuk dapat bekerja pada katagori tanah lembap. Dimana Sensor YL-69 mengirimkan data tegangan ke mikrokontroler. Parameter pembacaan sensor nantinya akan membuat sistem penyiram tanaman bawang merah akan aktif (on). Metode penyiraman tanaman bawang merah dilakukan dengan sistem on dan off, sistem pengontrolan pompa air yang dikendalikan oleh mikrokontroler. Sistem kerja dari pompa air adalah ketika nilai kelembapan tanah yang dibaca oleh sensor YL-69 di bawah 40%, mikrokontroler akan memberikan sinyal kepada driver motor pompa yang nantinya akan menyalakan (on) atau mematikan (off) pompa. Dari hasil pengujian yang dilakukan didapatkan lamanya waktu penyiraman sebesar 13 sampai dengan 16 detik untuk mencapai nilai kelembapan sebesar 40%. Dari sistem penyiraman otomatis yang berhasil menunjang peroses tumbuh cepat dan hasil panen yang lebih baik.
Robot Pengikut Target Berdasarkan Bentuk dan Warna Menggunakan Metode HSV Untuk Aplikasi Assistant Robot Syahri Muharom; Saiful Asnawi; Affan Bachri
Jurnal JE-UNISLA : Electronic Control, Telecomunication, Computer Information and Power System Vol 6, No 1 (2021)
Publisher : Universitas Islam Lamongan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30736/je.v6i1.571

Abstract

In this era many system can be help people  doing activity. Assistant robot is a robot used to help people activity. Follower robot is a robot can follow the object automatically. From the background, the researcher created a robot can follower target based on shape and color to assistant robot application. This robot equipped with camera to detect target and microcontroller to movement robot control. To recognize object, the system will detect object based on shape and colour, then the robot will follow wherever the target moves. From the test result, the system can detect object is 86.6% successs rate, with the best lumination of light is 120 lux. Testing detection target based on distance, having result is 87,5% success rate, with minimum distance is 30 cm and maximum distance is 350 cm. from all of experiment, the robot will moves follow target while the distance of target is more then 80cm  and less than 350 cm, and the robot will stop while distance target is less then 80 cm. the researcher hope the robot can giving help people in daily activity.
Sistem Kontrol dan Monitoring Penerangan Lampu Taman Berbasis Website Ilham Surya Saputra; Adji Ramadhan; Syahri Muharom
Prosiding Seminar Nasional Teknik Elektro, Sistem Informasi, dan Teknik Informatika (SNESTIK) 2022: SNESTIK II
Publisher : Institut Teknologi Adhi Tama Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (499.285 KB) | DOI: 10.31284/p.snestik.2022.2793

Abstract

Lampu taman merupakan salah satu fasilitas umum yang berperan memberikan penerangan di setiap taman yang ada dalam kota. Lampu taman yang padam masih ditangani secara manual dengan mengandalkan informasi dari masyarakat yang melapor melalui comand center Kota Surabaya. Berdasarkan permasalahan di lapangan, ditemukan solusi dengan membuat alat monitoring lampu taman solar cell yang dapat diakses melalui website. Hasil dari permasalahan yang ada di lapangan, dirancang alat monitoring lampu taman solar cell berbasis website menggunakan mikrokontroler NodeMCU ESP8266 yang terkoneksi jaringan internet sehingga mampu menampilkan data tegangan dan arus pada photovoltaic, baterai dan lampu. Fungsi lain dari alat ini guna memantau kondisi lampu nyala atau padam pada lampu taman solar cell dan mengetahui letak tiang lampu taman yang ada di lapangan
Rancang Bangun Vending Machine dengan RFID Sebagai Pembayaran Elektronik Berbasis Arduino Muh Luay Bagus Pamungkas; Ade Rachmawan; Syahri Muharom
Prosiding Seminar Nasional Teknik Elektro, Sistem Informasi, dan Teknik Informatika (SNESTIK) 2021: SNESTIK I
Publisher : Institut Teknologi Adhi Tama Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (274.637 KB) | DOI: 10.31284/p.snestik.2021.1747

Abstract

Masyarakat milenial saat ini cenderung senang menggunakan sesuatu yang modern dan mudah dalam pengoperasiannya. Apabila sekedar membeli minuman atau makanan ringan, tak perlu antre saat melakukan pembayaran pada kasir seperti yang terjadi pada supermarket atau gerai perbelanjaan. Maka dari itu, penulis ingin membuat alat vending machine. Pembuatan vending machine berbasis Arduino Uno ini didasarkan pada belum adanya vending machine yang menggunakan RFID sebagai sistem pembayarannya. Ketika terdapat saldo Rp10.000,00 pada kartu RFID, akan dapat digunakan bertransaksi untuk pengambilan cokelat kemasan, dibutuhkan Rp2.000,00 setiap pengambilan cokelat kemasan. Persentase keberhasilan pemilihan cokelat sebesar 86,7% dan pemotongan saldo yang digunakan untuk pembayaran secara otomatis sebesar 84%. Dengan demikian, sistem sudah berhasil dibuat dan dapat bekerja dengan baik. Pada alat ini, RFID digunakan sebagai akses dan saldo untuk pemilihan cokelat secara otomatis.
Design and Build a Telegram – Based Infusion Droplet Control and Monitoring System Syahri Muharom; Adjie Ramadhan; Aloysius Gonzaga Kristianto Juje
Procedia of Engineering and Life Science Vol 2 No 2 (2022): Proceedings of the 4th Seminar Nasional Sains 2022
Publisher : Universitas Muhammadiyah Sidoarjo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21070/pels.v2i2.1225

Abstract

Infusion is an important part of the process of care and healing of patients who are in the hospital, however, the errors often occur in setting the drip or replacing the infusion that has run out, this can cause the patient to die. From these problems, the researcher has an idea by creating a system that can monitor and control the infusion, so that later it can give warnings to nurses based on Telegram. Several sensors are used for the designed system, including load cell, load cell sends data on the weight of infusion fluids to Arduino, then Arduino sends weight information to Telegram to be monitored, infusion drip control system is carried out using servo and optocoupler sensors. From the tests carried out, the servo and optocoupler systems can adjust the infusion drops according to the patient's needs based on orders from the telegram, with an average error of 1.3%, and the system can provide information to the telegram to identify that the infusion fluid is almost empty. From this study, it is expected that the system can assist nurses in monitoring the availability of infusion fluids in patients and can control infusion drops based on patient needs.
Implementation of 1D convolutional neural network for improvement remote photoplethysmography measurement Riza Agung Firmansyah; Yuliyanto Agung Prabowo; Titiek Suheta; Syahri Muharom
Indonesian Journal of Electrical Engineering and Computer Science Vol 29, No 3: March 2023
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijeecs.v29.i3.pp1326-1335

Abstract

Remote photoplethysmography (rPPG) for non-contact heart rate measurement has been widely developed and shows good development. However, motion artifact due to changes in illumination and subject movement is still the main problem. Especially when measurements are taken in real conditions. In these conditions, it will be vulnerable to rPPG signal readings with poor signal quality. So, in this paper, it is proposed to classify the signal quality using one dimensional convolutional neural network (1D CNN). The classification is carried out based on the extraction of the temporal features of the rPPG signal that has been obtained from the plane orthogonal to skin algorithm and the magnitude of the subject's movement when measured. The classification results are entered into a compensated network if the signal obtained shows moderate quality. The compensated network will provide a more accurate estimate of hr value. The test was carried out using a dataset of 10 subjects, each measured with 3 different types of illumination. In the experiments conducted, the system's performance showed an improvement compared to the POS algorithm alone. The experiment found that the mean absolute error measurement was 2.78, and the mean error was relative at 3.67%.
Monitoring Suhu Dan Infus Pasien Rumah Sakit Pasca Pandemic Berbasis Android Denaldan Tabarui Landu Praing; Adelina Purba; syahri Muharom
Prosiding Seminar Nasional Sains dan Teknologi Terapan 2022: Energi Terbarukan dan Keberlanjutannya di Berbagai Sektor
Publisher : Institut Teknologi Adhi Tama Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Maintaining health is very vital for life, especially during the current COVID-19 pandemic era. One of the protocols imposed by the government for people doing their activities in public places is to check their body temperatures. Meanwhile, the periodic infusion checks of patients during the COVID-19 pandemic are still done manually by medical officers using complete PPE. When the infusion runs out, sometimes an officer comes late in changing the infusion, and this can be dangerous for a patient. To overcome the problems due to the unmonitored use of infusions and the patient's body temperature, a tool and a system are necessary. How the infusion works must be monitored so that its use can be better controlled. Therefore, the researcher raised the title of an Android-based monitoring system for patients’ temperature and infusion. To develop this system, the researcher employed contactless 906 as the temperature sensor and a load cell as the scale sensor to check the infusion. The load cell sensor would determine when the infusion weight varied, such as when the load cell was given an infusion load of 200 ml, the buzzer would sound like an alarm sensor. Data on body temperature and infusion weight would also be displayed on the LCD, which was then featured on the Android mobile phone application in the form of body temperature and infusion weight status in real time
Sistem Pengering Pakaian Otomatis Berbasis Microcontroller Muhammad Shofiyullah; Syahri Muharom
Prosiding Seminar Nasional Teknik Elektro, Sistem Informasi, dan Teknik Informatika (SNESTIK) 2023: SNESTIK III
Publisher : Institut Teknologi Adhi Tama Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31284/p.snestik.2023.3978

Abstract

Currently, most of the drying is still done in the traditional way of drying clothes in the hot sun, this method is very dependent on sunlight. The problem often occurs, when the rainy season comes, clothes take a long time to dry due to lack of sunlight, so clothes are easily moldy. Based on these problems, the researchers created an automatic clothes drying system using an artificial heater. The system is equipped with microcontroller as the main system, a hair dryer and two fans. This system works by heating ambient air, then circulating the air through a mechanical interior to help dry the air. Based on tests carried out on three fabrics, denim, wool and satin, the system can dry clothes in an average of 30 minutes. Based on this research, it is hoped that it can help dry clothes when the weather is less sunny or during the rainy season.
Monitoring Kapasitas Tempat Sampah Dengan Sensor Ultrasonik Berbasis Mikrokontroller dan Esp8266 Bagus Yudit Laksono; Haris Rachmansyah; Bintang Ramadhani; Imam taufik; Syahri Muharom
Prosiding Seminar Nasional Teknik Elektro, Sistem Informasi, dan Teknik Informatika (SNESTIK) 2023: SNESTIK III
Publisher : Institut Teknologi Adhi Tama Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31284/p.snestik.2023.4055

Abstract

Masalah sampah yang muncul di lingkungan saat ini karena kesadaran masyarakat tentang pengolahan sampah yang baik masih rendah. Selanjutnya, tempat sampah yang bersih dan unik dengan kombinasi teknologi modern diharapkan dapat menginspirasi masyarakat tentang pembuangan sampah yang benar. Selain itu, ada informasi bahwa saat ini tong sampah di tempat umum seperti bandara, sekolah, taman kota, pinggir jalan, tempat wisata belum sepenuhnya memanfaatkan efek sistem otomasi. . Kemudian dikatakan bahwa untuk mengatasi permasalahan tersebut diperlukan inovasi baru dengan memadukan teknologi otomasi dan teknologi informasi di bidang sanitasi yaitu perancangan tempat sampah otomatis berbasis mikrokontroler yang dilengkapi dengan sensor dan modul elektronik lainnya sebagai fitur tambahan. Dengan adanya inovasi ini diharapkan dapat menggugah minat masyarakat untuk membuang sampah pada tempatnya, menciptakan lingkungan yang bersih dan sehat serta meningkatkan kesadaran masyarakat akan pentingnya membuang sampah.
Co-Authors Abdul Hamid Achmad Efendi Setiawan Ade Rachmawan Ade Rachmawan Adelina Purba Adji Ramadhan Adjie Ramadhan Affan Bachri Akbar, Zakky Rezky Aloysius Gonzaga Kristianto Juje Andy Suryowinoto Antonius Ari Kunto Antonius Ari Kunto Bagus Priyo Raharjo Bagus Yudit Laksono Bernado Da Costa Ximenes Bintang Ramadhani Candrarani, Diva Choirul Anam AM Diponegoro Citra Nurina Prabiantissa Denaldan Tabarui Landu Praing Devy Kuswidiastuti Dimas Aditya Putra Wardhana Djoko Purwanto Firmansyah, Riza Agung Firmansyah, Vegal Firmasnsyah, Haris Abdullah Firnanda, Rony Haris Abdullah Firmasnsyah Haris Rachmansyah Heru Suseno Heru Suseno, Heru Huda, Mochammad Syamsul Ilham Surya Saputra Ilmiatul Masfufiah Imam taufik Imam Taufik Karisma Trinanda Putra Kurnaiwan Muchamad Laksono, Bagus Yudit Mamat Septyan Marcelinus Amalia Lamanele Masfufiah, Ilmiatul Misbahul Munir Moch. Kalam Mollah Muchamad, Kurnaiwan Muh Luay Bagus Pamungkas Muhammad Attamimi Muhammad Hasyim, Muhammad Muhammad Rivai Muhammad Shofiyullah Odinanto, Tjahya Prabowo, Yulianto Agung Rachmawan, Ade Raharjo, Bagus Priyo Riza Agung Romadhon, Sandi Romadon, Moch Syahrul Fajar Ronny Mardiyanto, Ronny Rudy Dikairono Ruth Johana Hutagalung Saiful Asnawi Sasmito Oetomo Septyan, Mamat Setiawan, Achmad Efendi Setyawan, Surya Adhi Surya Adhi Setyawan Surya Adi Surya Adi Titiek Suheta Titiek Suheta Titiek Suheta Tjahya Odinanto Totok Mujiono, Totok Trisna Wati Trisna Wati, Trisna Tukadi Tukadi, Tukadi Wahyu Setyo Pambudi Yuliyanto Agung Prabowo Yunardi, Riky Tri