Claim Missing Document
Check
Articles

Found 4 Documents
Search
Journal : Jurnal Teknik Sipil

Kapasitas Rekatan GFRP-S pada Balok Beton Akibat Perendaman Air Laut Djamaluddin, Rudy; Irmawaty, Rita; Kwandou, Robby
Jurnal Teknik Sipil Vol 22, No 1 (2015)
Publisher : Institut Teknologi Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (872.409 KB) | DOI: 10.5614/jts.2015.22.1.3

Abstract

Abstrak. Glass Fiber Reinforced Polymer Sheet (GFRP-S) merupakan material perkuatan struktur yang non-korosif dan telah banyak digunakan untuk beragam jenis konstruksi, baik untuk gedung maupun struktur yang terekspos di lingkungan laut. Sifat non-korosif ini tentunya sangat menguntungkan apabila diterapkan pada konstruksi yang terekspos di lingkungan laut. Oleh karena itu dilakukan studi untuk menganalisis pengaruh air laut terhadap kapasitas rekatan GFRP-S. Benda uji berupa 12 balok beton berukuran 10 cm x 12 cm x 60 cm dengan perkuatanGFRP-S. Tiga balok tidak direndam dalam laut sedangkan tiga balok masing-masing direndam dalam laut selama 1 bulan, 3 bulan dan 6 bulan. Pemeriksaan dilakukan pada beban ultimit, lendutan, regangan GFRP-S dan regangan beton. Dari studi ini dapat disimpulkan bahwa terjadi penurunan nilai beban ultimit balok dan kapasitas rekatanGFRP-S seiring dengan meningkatnya waktu rendaman. Penurunan kapasitas lentur disebabkan oleh penurunan kapasitas rekatan GFRP-S. Hasil analisis menunjukkan terjadi penurunan kapasitas rekatan GFRP-S sekitar 15% setelah perendaman 6 bulan.Abstract. Glass Fiber Reinforced Polymer Sheet (GFRP-S) is the non-corrosive material used for strengthening and has been widely used for many kinds of structures, such as buildings and structures exposed to marine environment. Its noncorrosive property is suitably purposed for the application of structures exposed to marine environment. Therefore, this study was conducted for analyzing the effect of sea water on bonding capacity of GFRP-S. Specimens were 12 concrete beams of 10 cm x 12 cm x 60 cm strengthened with GFRP-S. Three beams were not submersed in the sea while three beams were each submersed in the sea for 1 month, 3 months and 6 months, respectively. Testing was conducted on the ultimate load, the deflection, the GFRP-S strain and the concrete strain. From this study, it can be concluded that both the ultimate load and the bonding capacity of GFRP-S decreases along with the increasing of submersion period. The flexural capacity was decreased due to the decreasing of the bonding capacity of GFRP-S. The result of analysis indicates that the bonding capacity of GFRP-S decreased about 15% after submersed for 6 months in sea water.
Pengaruh Rendaman Air Laut terhadap Kapasitas Rekatan GFRP-Sheet pada Balok Beton Bertulang Sultan, Mufti Amir; Djamaluddin, Rudy
Jurnal Teknik Sipil Vol 24, No 1 (2017)
Publisher : Institut Teknologi Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1634.687 KB) | DOI: 10.5614/jts.2017.24.1.5

Abstract

AbstrakPembangunan struktur beton yang berada di daerah lingkungan ekstrim seperti daerah pantai akan mengakibatkan penurunan kekuatan bahkan mengalami kerusakan apabila tidak diadakan perawatan dan perbaikan, ini diakibatkan adanya klorida yang terdapat pada air laut. Salah satu cara perbaikan struktur yang populer sekarang ini adalah dengan menggunakan material Glass Fiber Reinforced Polymer yang mempunyai salah satu kelebihan yaitu tahan korosi. Pada penelitian ini akan dilakukan studi eksperimental untuk menyelidiki perilaku lentur balok beton bertulang dengan perkuatan GFRP-Sheet yang direndam di air laut dengan lama perendaman 1, 3, 6 dan 12 bulan. Benda uji terdiri dari 11 buah balok bertulang dengan dimensi (15x20x330) cm yang telah diperkuat dengan GFRP-Sheet pada daerah lentur. Benda uji dilakukan pengujian dengan memberi beban statik sampai mencapai kekuatan batas, untuk merekam data-data pada saat pengujian dipasang strain gauge pada permukaan benda uji dan GFRP-Sheet untuk membaca regangan. Hasil analisis menunjukkan terjadi penurunan kapasitas rekatan sekitar 11,04% setelah perendaman 12 bulan.AbstractConstruction of concrete structures that located in extreme environments are such as coastal areas will result in decreased strength or even the damage of the structures. As well know, chloride contained in sea water is responsible for strength reduction or structure failed were hence maintenance and repairs on concrete structure urgently needed. One popular method of structural improvements which under investigation is to use the material Glass Fiber Reinforced Polymer which has one of the advantages such as corrosion resistance. This research will be conducted experimental studies to investigate the flexural behavior of reinforced concrete beams with reinforcement GFRP-Sheet immersed in sea water using immersion time of 1, 3, 6 and 12 months. Test specimen consists of 11 pieces of reinforced beams with dimensions (15x20x330) cm that had been reinforced with GFRPSheet in the area of bending. The test specimen tested by providing a static load until it reaches the power limit, to record data during the test strain gauge mounted on the surface of the specimen and the GFRP-Sheet to collect the strain value. The result of analysis indicates the bonding capacity of GFRP Sheet decreases about 11.04% after immersed for 12 months in sea water.
Kapasitas Rekatan GFRP-S pada Balok Beton Akibat Perendaman Air Laut Rudy Djamaluddin; Rita Irmawaty; Robby Kwandou
Jurnal Teknik Sipil Vol 22 No 1 (2015)
Publisher : Institut Teknologi Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.5614/jts.2015.22.1.3

Abstract

Abstrak. Glass Fiber Reinforced Polymer Sheet (GFRP-S) merupakan material perkuatan struktur yang non-korosif dan telah banyak digunakan untuk beragam jenis konstruksi, baik untuk gedung maupun struktur yang terekspos di lingkungan laut. Sifat non-korosif ini tentunya sangat menguntungkan apabila diterapkan pada konstruksi yang terekspos di lingkungan laut. Oleh karena itu dilakukan studi untuk menganalisis pengaruh air laut terhadap kapasitas rekatan GFRP-S. Benda uji berupa 12 balok beton berukuran 10 cm x 12 cm x 60 cm dengan perkuatanGFRP-S. Tiga balok tidak direndam dalam laut sedangkan tiga balok masing-masing direndam dalam laut selama 1 bulan, 3 bulan dan 6 bulan. Pemeriksaan dilakukan pada beban ultimit, lendutan, regangan GFRP-S dan regangan beton. Dari studi ini dapat disimpulkan bahwa terjadi penurunan nilai beban ultimit balok dan kapasitas rekatanGFRP-S seiring dengan meningkatnya waktu rendaman. Penurunan kapasitas lentur disebabkan oleh penurunan kapasitas rekatan GFRP-S. Hasil analisis menunjukkan terjadi penurunan kapasitas rekatan GFRP-S sekitar 15% setelah perendaman 6 bulan.Abstract. Glass Fiber Reinforced Polymer Sheet (GFRP-S) is the non-corrosive material used for strengthening and has been widely used for many kinds of structures, such as buildings and structures exposed to marine environment. Its noncorrosive property is suitably purposed for the application of structures exposed to marine environment. Therefore, this study was conducted for analyzing the effect of sea water on bonding capacity of GFRP-S. Specimens were 12 concrete beams of 10 cm x 12 cm x 60 cm strengthened with GFRP-S. Three beams were not submersed in the sea while three beams were each submersed in the sea for 1 month, 3 months and 6 months, respectively. Testing was conducted on the ultimate load, the deflection, the GFRP-S strain and the concrete strain. From this study, it can be concluded that both the ultimate load and the bonding capacity of GFRP-S decreases along with the increasing of submersion period. The flexural capacity was decreased due to the decreasing of the bonding capacity of GFRP-S. The result of analysis indicates that the bonding capacity of GFRP-S decreased about 15% after submersed for 6 months in sea water.
Pengaruh Rendaman Air Laut terhadap Kapasitas Rekatan GFRP-Sheet pada Balok Beton Bertulang Mufti Amir Sultan; Rudy Djamaluddin
Jurnal Teknik Sipil Vol 24 No 1 (2017)
Publisher : Institut Teknologi Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.5614/jts.2017.24.1.5

Abstract

AbstrakPembangunan struktur beton yang berada di daerah lingkungan ekstrim seperti daerah pantai akan mengakibatkan penurunan kekuatan bahkan mengalami kerusakan apabila tidak diadakan perawatan dan perbaikan, ini diakibatkan adanya klorida yang terdapat pada air laut. Salah satu cara perbaikan struktur yang populer sekarang ini adalah dengan menggunakan material Glass Fiber Reinforced Polymer yang mempunyai salah satu kelebihan yaitu tahan korosi. Pada penelitian ini akan dilakukan studi eksperimental untuk menyelidiki perilaku lentur balok beton bertulang dengan perkuatan GFRP-Sheet yang direndam di air laut dengan lama perendaman 1, 3, 6 dan 12 bulan. Benda uji terdiri dari 11 buah balok bertulang dengan dimensi (15x20x330) cm yang telah diperkuat dengan GFRP-Sheet pada daerah lentur. Benda uji dilakukan pengujian dengan memberi beban statik sampai mencapai kekuatan batas, untuk merekam data-data pada saat pengujian dipasang strain gauge pada permukaan benda uji dan GFRP-Sheet untuk membaca regangan. Hasil analisis menunjukkan terjadi penurunan kapasitas rekatan sekitar 11,04% setelah perendaman 12 bulan.AbstractConstruction of concrete structures that located in extreme environments are such as coastal areas will result in decreased strength or even the damage of the structures. As well know, chloride contained in sea water is responsible for strength reduction or structure failed were hence maintenance and repairs on concrete structure urgently needed. One popular method of structural improvements which under investigation is to use the material Glass Fiber Reinforced Polymer which has one of the advantages such as corrosion resistance. This research will be conducted experimental studies to investigate the flexural behavior of reinforced concrete beams with reinforcement GFRP-Sheet immersed in sea water using immersion time of 1, 3, 6 and 12 months. Test specimen consists of 11 pieces of reinforced beams with dimensions (15x20x330) cm that had been reinforced with GFRPSheet in the area of bending. The test specimen tested by providing a static load until it reaches the power limit, to record data during the test strain gauge mounted on the surface of the specimen and the GFRP-Sheet to collect the strain value. The result of analysis indicates the bonding capacity of GFRP Sheet decreases about 11.04% after immersed for 12 months in sea water.