Claim Missing Document
Check
Articles

ANALYSIS OF PARKING CHARACTERISTICS AND THE EFFECT OF ON STREET PARKING ON TRAFFIC PERFORMANCE Zulvia, Avita; Rizani, Mohammad Debby; Suwandi, Putri Anggi Permata
International Journal of Sustainable Building, Infrastructure and Environment (IJOSBIE) Vol 3, No 1 (2022)
Publisher : Science and Technology Research Centre, Universitas PGRI Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26877/ijosbie.v3i1.12903

Abstract

The space are available for park vehicle on the edge road in the area center city and along main street thing to do with permanent there is restrictions and controls as well as Settings or often called on street parking(Clarkson Grg Lesby and Bary Hicks, 1988). Study this background behind by trouble performance then traffic that is less than optimal is caused by the presence of on street parking on lane bicycle on Kartini Street, Salatiga City. In resolve problem the required existence analysis about characteristics parking and influence on-street parking along Kartini Street, Salatiga City. Method used in study this that is method approach descriptive quantitative. Collecting the data obtained from results interview, notes field, documentation private, notes researchers, and documents residents other. Study this show that characteristics parking and influence on-street parking to performance then traffic on Kartini Street, Salatiga City for duration parking belong to Category 1 and significant high turnover duration short, in general vehicle parking not enough from one hour with duration parking short in general for parking in the center spending, with capacity street 2489,22 pcu/hour, speed current free 37,665 km/hour vehicles as well as level service belong to category Level Of Service (LOS) B (0.20-0.44) with characteristics current stable, speed a little limited by past traffic, driver still could free in choose the speed. 
REWORK COST ANALYSIS ON COLUMN WORK IMPLEMENTATION METHODS “CASE STUDY: CONSTRUCTION PROJECT OF HOSPITAL ROEMANI MUHAMMADIYAH PARKING BUILDING SEMARANG” Suep, Muhamad; Husodo, Ibnu Toto; Suwandi, Putri Anggi Permata; Kristiawan, Agung
International Journal of Sustainable Building, Infrastructure and Environment (IJOSBIE) Vol 3, No 1 (2022)
Publisher : Science and Technology Research Centre, Universitas PGRI Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26877/ijosbie.v3i1.12980

Abstract

The word of construction is no stranger to rework. In the course of the implementation of construction, rework work may occur which can cause delays in the work process and swelling of the project cost budget. This can be influenced by several problems or factors that are often encountered during development work such as human resourse factors, documentation and disign, managerial with this can be from sevaral that have been mentioned that must be considered when planning construction development. In this study using descriptive research that directly takes data in the field by means of interviews, documentation, observation in order to be able to answer the research objectives properly and correctly according to the data obtained from the aforementioned data collection process. So that it can be seen the most frequently encountered rework jobs in the field. Based on the results of the study, it was shown that the dominant factor causing rework was managerial factor. The type of work that often experiences rework work is the finishing work of the second floor column casting. With the details of the causes of rework, the results obtained are design and documentation 22.5%, managerial 40.4%, and human resources 37.2%. The process of rework in the construction of the R S Roemani Semarang building can be concluded that there are several problems or identification of rework, namely porous columns, column slopes and column centring.
ACCESSIBILITY OF TRANSPORTATION FACILITIES FOR DISABILITIES (CASE STUDY OF TRANS SEMARANG) Suwandi, Putri Anggi Permata; Saputro, Bayu Singgih; Hermanto, Wilarso; Kristiawan, Agung
International Journal of Sustainable Building, Infrastructure and Environment (IJOSBIE) Vol 1, No 2 (2020)
Publisher : Science and Technology Research Centre, Universitas PGRI Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26877/ijosbie.v1i2.6998

Abstract

Accessibility related to public transport is a means of advancing the economic welfare of the community, creating and increasing economic degrees, as well as a precursor sector of other sectors. Therefore, people with disabilities are also entitled to the same service to the public transportation as an effort to realize similarities, the equality of citizens and the enhancement of the role of disability. This research aims to analyse disability access and the role of the transportation service of Semarang and PT. Trans Semarang on Bus Rapid Transit in Semarang City. This research uses a type of qualitative approach that is implemented through interviews, observations and documentation. The conclusion of this research shows that from the regulatory aspects, the government of Semarang should be appreciated because the government of Semarang has tried to fulfill the rights of the disabled. But from the implementation aspect, there needs to be an improvement because the accessibility of disabled people running optimally can be seen through the condition of public facilities in the city of Semarang. Public facilities in the city of Semarang do not completely ignore the reference accessibility means there are public facilities that have been good enough but many more are not optimal.
ANALISIS PENERAPAN MANAJEMEN WAKTU PADA PROYEK PEMBANGUNAN GEDUNG DKK DAN GEDUNG PARKIR PANDANARAN KOTA SEMARANG ( Studi Kasus : PT. Sinar Cerah Sempurna ) Wibowo, Doni Ari; Priyatno, Bagus; Permata Suwandi, Putri Anggi
Jurnal Teknik Sipil Giratory UPGRIS Vol 1, No 1: Juni 2020
Publisher : Universitas PGRI Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (667.943 KB) | DOI: 10.26877/giratory.v1i1.5424

Abstract

Implementation of project time management is very important to ensure that the projeck can be on time. Failure in the implementation time management due to various constraints one of which is the delay of work due to the fault of the implementing party that is experiencing an obstacle. So it is very necessary to analyze the constraints faced by a construction service company  in appliying the time management. The method used to analyze the factors of project time management constraints is the analysis of the Saverity index, frequency index and importance index. The study was conducted by distributing questionnaires to 25 employees of PT. Sinar Cerah Sempurna on the construction of the DKK Building and Semarang City Pandanaran Parking Building. The time performance in the construction of the DKK Building and the Semarang City Pandanaran Parking Building based on the average deviation of the project time schedule showed a figure of 4.06%. Seen from table 4.38. The deviation value indicates that the figure is included in the average category. In addition, this can be seen from the results of the ranking analysis of the constraints that occur directly proportional to the project time schedule that is in progress Ranking of the 10 major obstacles to the implementation of time management are: difficulties in procurement of labor (8.64), slow mobilization of tools (8.17), lack of supervision and financial control (7.95), conflicts with other construction activities (7.83), low labor mobilization (7.83), lack of supervision of work performance and productivity (7.61), late delivery of materials (7.61), lack of communication and coordination between project implementation teams (7.50) , lack of equipment-related supervision (7.49) late payment to suppliers or subcontractors (7.44). The ranking of dominant factors that constrain the implementation of time management is seen from the main factors, namely: Labor factor with an interest index of (7.43), Factor tools with a factor of interest index of (7.25), Financial factors with a factor of interest index of (7.22),Communication factors and coordination with an interest index of (7.15), Planning factors with an interest index of (7.01), Material factors with an interest index of (6.97) and finally a supervision factor with an index of (6.84).
ANALISIS PENGARUH KESELAMATAN DAN KESEHATAN KERJA (K3) TERHADAP KINERJA PEKERJA KONSTRUKSI PADA PEKERJAAN DINDING DAN PLESTER (Studi Kasus Proyek Pembangunan Gedung Dinas Kesehatan Kota Semarang) Prihatmoko, Diyan Ari; Husodo, Ibnu Toto; Permata Suwandi, Putri Anggi
Jurnal Teknik Sipil Giratory UPGRIS Vol 1, No 1: Juni 2020
Publisher : Universitas PGRI Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (320.537 KB) | DOI: 10.26877/giratory.v1i1.5426

Abstract

Pekerjaan konstruksi sangat rentan terhadap kecelakaan kerja. Maka dari itu pelaksanaan K3 pada proyek konstruksi sangat penting untuk mencegah kecelakaan kerja yang terjadi di lapangan. Penelitian ini bertujuan untuk mencari tahu bagaimana pelaksanaan perlindungan K3 pada prouek Dinas Kesehatan Kota Semarang. Dan apakah K3 mempunyai pengaruh terhadap produktivitas para pekerja konstruksi pada pekerjaan dinding dan plester di proyek Dinas Kesehatan Kota Semarang. Metode yang digunakan yaitu menggunakan metode deskriptif. Dengan pengumpulan data langsung di lapangan. Pengamatan dilakukan terhadap lima tukang dan kenek ketika melakukan pekerjaan dinding dan plester pada proyek Dinas Kesehatan Kota Semarang. Penelitian ini dilakukan  selama 15 hari kerja. Dari hasil pengamatan produktivitas dengan memperhitungkan mutu hasil pada pekerjaan dinding menunjukkan bahwa TK 2 memperoleh  peringkat pertama dengan nilai 0,046 m²/menit, diikuti dengan TK 1 dengan nilai 0,042 m²/menit, selanjutnya peringkat ketiga diraih oleh TK 3 dengan nilai 0,032 m²/menit. Pada peringkat keempat diraih oleh TK 4 dengan nilai 0,023 m²/menit dan peringkat kelima diraih oleh TK 5 dengan perolehan nilai 0,18 m²/menit. Dari hasil pengamatan produktivitas dengan memperhitungkan mutu hasil pada pekerjaan plester menunjukkan bahwa TK 1 memperoleh peringkat pertama dengan nilai 0,029 m²/menit. Pada peringkat kedua diperoleh TK 3 dengan nilai 0,23 m²/menit, selanjutnya peringkat ketiga diraih oleh TK 4 dengan nilai 0,020 m²/menit, kemudian peringkat keempat diraih oleh TK 2 dengan nilai 0,017 m²/menit, dan peringkat terakhir diraih oleh TK 5 dengan nilai 0,013 m²/menit. Dengan demikian, pada pengamatan lima TK (tukang dan kenek) ini menunjukkan bahwa penggunaan APD lengkap tidak mengurangi produktifitas dalam pekerjaan dinding dan plester di proyek Dinas Kesehatan Kota Semarang.  Pekerjaan konstruksi sangat rentan terhadap kecelakaan kerja. Maka dari itu pelaksanaan K3 pada proyek konstruksi sangat penting untuk mencegah kecelakaan kerja yang terjadi di lapangan. Penelitian ini bertujuan untuk mencari tahu bagaimana pelaksanaan perlindungan K3 pada prouek Dinas Kesehatan Kota Semarang. Dan apakah K3 mempunyai pengaruh terhadap produktivitas para pekerja konstruksi pada pekerjaan dinding dan plester di proyek Dinas Kesehatan Kota Semarang. Metode yang digunakan yaitu menggunakan metode deskriptif. Dengan pengumpulan data langsung di lapangan. Pengamatan dilakukan terhadap lima tukang dan kenek ketika melakukan pekerjaan dinding dan plester pada proyek Dinas Kesehatan Kota Semarang. Penelitian ini dilakukan  selama 15 hari kerja. Dari hasil pengamatan produktivitas dengan memperhitungkan mutu hasil pada pekerjaan dinding menunjukkan bahwa TK 2 memperoleh  peringkat pertama dengan nilai 0,046 m²/menit, diikuti dengan TK 1 dengan nilai 0,042 m²/menit, selanjutnya peringkat ketiga diraih oleh TK 3 dengan nilai 0,032 m²/menit. Pada peringkat keempat diraih oleh TK 4 dengan nilai 0,023 m²/menit dan peringkat kelima diraih oleh TK 5 dengan perolehan nilai 0,18 m²/menit. Dari hasil pengamatan produktivitas dengan memperhitungkan mutu hasil pada pekerjaan plester menunjukkan bahwa TK 1 memperoleh peringkat pertama dengan nilai 0,029 m²/menit. Pada peringkat kedua diperoleh TK 3 dengan nilai 0,23 m²/menit, selanjutnya peringkat ketiga diraih oleh TK 4 dengan nilai 0,020 m²/menit, kemudian peringkat keempat diraih oleh TK 2 dengan nilai 0,017 m²/menit, dan peringkat terakhir diraih oleh TK 5 dengan nilai 0,013 m²/menit. Dengan demikian, pada pengamatan lima TK (tukang dan kenek) ini menunjukkan bahwa penggunaan APD lengkap tidak mengurangi produktifitas dalam pekerjaan dinding dan plester di proyek Dinas Kesehatan Kota Semarang.
ANALISA KARAKTERISTIK PARKIR DAN PENGARUH ON STREET PARKING TERHADAP KINERJA LALU LINTAS (Studi Kasus Pada Ruas Jalan Kartini Kota Salatiga) Zulvia, Avita; Rizani, Mohammad Debby; Permata Suwandi, Putri Anggi
Jurnal Teknik Sipil Giratory UPGRIS Vol 3, No 2: Desember 2022
Publisher : Universitas PGRI Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26877/giratory.v3i2.14505

Abstract

AbstractThe space are available for parking vehicles on the roadside in the downtown area and along main highways is carried out with still restrictions and controls and arrangements or is often called on-street parking (Clarkson Grg Lesby and Bary Hicks, 1988). This research is motivated by the problem of less than optimal traffic performance caused by the presence of on street parking on the bicycle lane on Jalan Kartini, Salatiga City. In overcoming these problems, it is necessary to analyze the characteristics of parking and the effect of on street parking along Jalan Kartini, Salatiga City. The method used in this study is a quantitative descriptive approach. Collecting data obtained from interviews, field notes, personal documentation, researcher notes, and other resident documents. This study shows that parking characteristics and the effect of on street parking on traffic performance on Jalan Kartini, Salatiga City, for parking duration are categorized as Category I and high turnover which means short duration, generally parking vehicles are less than one hour with short parking durations. for parking in shopping centers, with a road capacity of 2489.22 smp/hour, a free-flow speed of 37.665 km/hour and a level of service belonging to the Level Of Service (LOS) B category (0.20-0.44) with stable flow characteristics, speed is slightly limited by traffic, driver can still freely choose his speed.Keywords: parking, on street parking, characteristics
ANALISIS PRODUKTIVITAS PEKERJA DENGAN METODE TIME STUDY PADA PEKERJAAN KOLOM (STUDI KASUS PROYEK REHABILITASI PASAR JOHAR KOTA SEMARANG) Sandi, Cahyo Kurnia; Cahyono, Ndaru; Husodo, Ibnu Toto; Permata Suwandi, Putri Anggi
Jurnal Teknik Sipil Giratory UPGRIS Vol 1, No 1: Juni 2020
Publisher : Universitas PGRI Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (672.394 KB) | DOI: 10.26877/giratory.v1i1.5421

Abstract

Produktivitas pekerja menentukan keberhasilan pelaksanaan jadwal proyek konstruksi, karena berdampak kepada kesesuaian antara perencanaan jadwal konstruksi dengan progres pekerjaan di lapangan. Oleh karena itu, pekerjaan kolom dan cendawan yang merupakan salah satu aktivitas kritis dalam pembangunan rehabilitasi tersebut perlu dianalisis produktivitas pekerjaannya. Tugas akhir ini bertujuan untuk menganalisis produktivitas pekerja pada pekerjaan kolom dan cendawan dan mencari faktor apa saja yang dapat mempengaruhi produktivitas pekerja pada proyek pembangunan Rehabilitasi Pasar Johar Kota Semarang. Perhitungan dilakukan dengan metode time study. Metode time study adalah metode pengukuran produktivitas tenaga kerja di lapangan dengan cara menentukan standard time suatu pekerjaan. Standard time diperoleh dari pengamatan. Pada pengamatan akan diukur nilai basic time yang akan diolah menjadi standard time, dan digunakan untuk menghitung nilai produktivitas. Dari hasil perhitungan diperoleh nilai produktivitas pekerja pada pekerjaan chipping kolom dan chipping cendawan adalah 7,36 m2/OH, dan 6,65 m2/OH. Untuk nilai produktivitas pada pekerjaan penulangan kolom dan cendawan adalah 42,81 kg/OH, dan 21,87 kg/OH. Sedangkan produktivitas pada pekerjaan bekisting kolom dan cendawan adalah 14,47 m2/OH dan 5,16 m2/OH. Untuk produktivitas pada pekerjaan grouting kolom dan cendawan adalah 0,41 m3/OH, dan 0,36 m3/OH, dan pekerjaan pekerjaan pemasangan Fibre Reinforced Plastic (FRP) kolom dan cendawan adalah 4,40 m2/OH dan 5,70 m2/OH. Dari hasil analisis produktivitas menentukan bahwa letak material dan tempat pengerjaan, jumlah pekerja, relaxation allowances, alat dan material yang digunakan adalah faktor-faktor yang mempengaruhi produktivitas pekerja pada pekerjaan kolom dan cendawan.
Parking Analysis at Banyumanik 2 General Hospital, Semarang City Khoir, Muhamad Walidul; Setiawan, Muhammad Agus; Suwandi, Putri Anggi Permata; Yudaningrum, Farida
International Journal of Sustainable Building, Infrastructure and Environment (IJOSBIE) Vol 6, No 2 (2025)
Publisher : Science and Technology Research Centre, Universitas PGRI Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26877/ijosbie.v6i2.21020

Abstract

Vehicle movement will be hampered if the available parking space is insufficient to meet the needs of the facility itselfThe method taken in making this final assignment is to use quantitative methods.the total parking revenue in the Banyumanik 2 Hospital area, Semarang City at the time of the research, based on predetermined parking planning, resulted in an estimated parking levy of Rp. 888,000.00,- per 2 hours.This planning results in a total parking pattern of 46 cars and 153 motorcycles. total income during the research was IDR 668,000.00 per 2 hours. Based on parking planning during research with 46 car lots and 153 motorbikes, there is a total planned levy of IDR 888,000.00 per 2 hours.
Implementation of Reinforced Concrete Floor Beams and Plates in a 5-Storey Hospital Building Construction Project Rosiyani, Tissa Rahayu; Kristiawan, Agung; Suwandi, Putri Anggi Permata
International Journal of Sustainable Building, Infrastructure and Environment (IJOSBIE) Vol 6, No 2 (2025)
Publisher : Science and Technology Research Centre, Universitas PGRI Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26877/ijosbie.v6i2.22425

Abstract

Hospitals are health care institutions that provide a full range of individual health services and provide inpatient, outpatient and emergency services. The comprehensive health services referred to in this case include promotive, preventive, curative and rehabilitative.[1] The construction of the new building at PKU Muhammadiyah Blora Hospital will be the center of the physiotherapy clinic, pharmaceutical satellite, commercial area, drop off, ICU, inpatient, office. The existence of the new building is a step to improve the quality of health services for patients. The new hospital building is located to the east of the main building in the PKU Muhammadiyah Blora Hospital complex. The work observed is the work of beams and reinforced concrete floor slabs. This work has several steps of workmanship. The work on the beams and floor slabs must complete the reinforcement and formwork simultaneously first, then the casting can be done.
Six Sigma-DMAIC (Define, Measure, Analyze, Improve, And Control) Analysis in Reducing Building Structural Defects (Case Study: Emirates Indonesia Cardiology Hospital Project) Mustika, Risti; Suwandi, Putri Anggi Permata; Kristiawan, Agung
International Journal of Sustainable Building, Infrastructure and Environment (IJOSBIE) Vol 6, No 2 (2025)
Publisher : Science and Technology Research Centre, Universitas PGRI Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26877/ijosbie.v6i2.24619

Abstract

Abstract. Construction projects often face challenges in maintaining quality, one of which is structural defects that can affect the quality and safety of the building. This study aims to analyze the level of defects in column, beam, and slab structures using the Six Sigma DMAIC method and provide solutions to improve these defects. The study was conducted on the Emirates Indonesia Cardiology Hospital Building Construction Project in Surakarta. The method used is a quantitative descriptive approach with the stages of Define, Measure, Analyze, Improve, and Control. Data were obtained through field observations, interviews, documentation, and secondary project data. The analysis results show that the average sigma level value is above 3, with the highest level in the column structure reaching 4.3 sigma for the type of concrete flow defect. The main causes of defects come from human factors, work methods, materials, and supervision. Improvement solutions are formulated using a fishbone diagram analysis approach and the assistance of NVIVO software for qualitative data analysis. This study shows that the Six Sigma DMAIC method is effective in identifying and reducing defects in concrete structure work and can be used as a quality control strategy in construction projects.Keywords: Six Sigma, DMAIC, Structural Defects, Construction Quality, NVIVO