Claim Missing Document
Check
Articles

Analisa proses pirolysis dengan variasi jumlah tabung pembakaran terhadap Karaktristik hasil bio-oil Kemas Ridhuan; Edi Winarno; Dwi Irawan
TURBO [Tulisan Riset Berbasis Online] Vol 11 No 2 (2022): TURBO : Jurnal Program Studi Teknik Mesin
Publisher : Universitas Muhammadiyah Metro

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24127/trb.v11i2.2347

Abstract

Bio-oil is a blackish liquid fuel derived from biomass such as corn cobs, rice husks and other biomass such as cocoa shells. The organic acid content in bio-oil gives bio-oil acidic properties. Bio-oil can be obtained in the pyrolysis combustion process, using a combustion tube. The number of tubes used can affect the yield characteristics of bio-oil. The purpose of this study was to determine the characteristics of bio-oil bio-oil produced by varying the number of combustion tubes in the pyrolysis process. Such as pyrolysis time, amount of bio-oil, temperature and content of bio-oil. This research method utilizes cocoa shell biomass waste to turn into bio-oil with a pyrolysis process, namely by varying the number of combustion tubes, namely one tube, two tubes and three tubes with a diameter of one tube 27.74 cm, two tubes 19.6 cm and three tubes 16 cm with the same cylinder volume of 18.7 cm3, by carrying out the prolysis process, namely putting the cocoa shell waste into the combustion tube and closing it. Then the combustion tube is inserted into the pyrolysis reactor and then closed and then burned. From the results of the research, the results of bio-oil in a single tube of raw material were 130 ml with a processing time of 113 minutes and bio-oil characteristics, a calorific value of 2177,464 cal/g, a viscosity of 1,574 CPs, and a pH of 4.77. Whereas in the second raw material tube, there were 80 ml with a processing time of 105 minutes and specifications for bio-oil, a calorific value of 2071,151 cal/g, a viscosity of 1,780 CPs and a pH of 4.96. While the three raw material tubes were 50 ml with a processing time of 100 minutes, and bio-oil specifications, calorific value 1983,950 cal/g, viscosity 2,626 CPs and pH 5.42.
ANALISA KEBUTUHAN BEBAN PENDINGIN DAN DAYA ALAT PENDINGIN AC UNTUK AULA KAMPUS 2 UM METRO. Kemas Ridhuan; Andi Refai
TURBO [Tulisan Riset Berbasis Online] Vol 2 No 2 (2013): Desember 2013
Publisher : Universitas Muhammadiyah Metro

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24127/trb.v2i2.26

Abstract

Factor-faktor kenyamanan dari suatu ruangan sangat ditentukan oleh letak, karaktristik dan kegiatan yang ada di dalamnya. Untuk mengatasi hal tersebut diperlukan suatu alat pendingin dengan beban pendinginan yang sesuai dengan kebutuhan ruang tersebut. Aula kampus 2 UM Metro sebagai tempat aktifitas akademik yang yang beragam, setiap saat selalu ramai dengan kapasitas 250 orang, memerlukan slot777 beban pendingin yang memadai. Penelitian ini bertujuan untuk mengetahui beban pendiginan dan daya pendinginan dari alat AC yang diperlukan untuk ruang Aula tersebut. Metode penelitian yang dilakukan yaitu kajian pustaka dan observasi. Mengamati berbagai kejadian seperti sudut pancaran sinar matahari, mengukur suhu dinding luar, dinding dalam, berbagai aksesoris yang ada dan jenis kegiatan yang dilakukan. Kemudian melakukan perhitungan dengan kajian pustaka. Hasil penelitian yang didapat yaitu beban pendinginan dari seperti dinding bata dengan lapisan plester, kaca, atap dari paduan alumunium, lantai dari beton dan keramik, lampu, penghuni, peralatan elektronik dan 250 orang jumlah maksimal yang ada pada ruangan aula kampus 2 UM Metro didapat sebesar 47,87 kW dan besar daya sistem pendingin AC yang diperlukan untuk mendinginkan beban pendinginan dari daya kompresornya sebesar 1,77 kW. Apabila dikonversikan daya kompresor 1,77 kW setara dengan 2,4 PK. untuk pemasangan AC dari 2,4 PK dibutuhkan 5 unit alat pendingin yang masing-masing alat berkapasitas ½ PK agar pendinginan diruang tersebut lebih efisien.
KAJIAN POTENSI SUMBER ENERGI BIOGAS DARI KOTORAN TERNAK UNTUK BAHAN BAKAR ALTERNATIF DI KECAMATAN KALIREJO KABUPATEN LAMPUNG TENGAH Untung Surya Dharma; Kemas Ridhuan
TURBO [Tulisan Riset Berbasis Online] Vol 3 No 2 (2014): Desember 2014
Publisher : Universitas Muhammadiyah Metro

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24127/trb.v3i2.644

Abstract

Biogas is a source of energy that is derived from the decomposition of organic matter by microorganisms in the absence of oxygen (anaerobic) to produce a mixture of several gases are methane (CH 4) and carbon dioxide (CO 2).Biogas can be made from many types of waste material and the rest aniani4d , a kind of garbage, livestock waste, agricultural waste and others.Things to consider in the development of biogas energy source so that the principle of availability of sustainable biogas as an alternative fuel can be met is a local or regional potential to produce biogas.Communities in the District Central Lampung regency Kalirejo many who maintain livestock.Waste from livestock manure is especially very disturbing and detrimental to health, it is encouraging to capitalize upon the waste as feedstock for biogas production.To assess the potential of biogas energy sources are needed data about the amount of livestock manure every day, in this study is the dung of cows, goats and chickens.Fermentation process for the three types of dirt inside the reactor each trial was conducted to determine the length / time effective and energy biogas produced.From the field data known total number of chickens are farmed as much as 176.264 , goat 12.345and cow 4.488 tail.Manure produced by 1 chicken, 1 goats and one cow in a row that is 0.055 kg / day, 0.98 kg / day and 19.5 kg / day.While the testing laboratory, known Biogas produced from each of 20 kg of dung that chicken manure yield of 2.04 m 3, cow dung yield of 0.56 m 3 and 0.76 m 3 cow dung.From field data and laboratory testing can be calculated local potential in providing sustainable biogas in District Kalirejo Kalirejo Central Lampung regency, namely the potential of biogas from chicken manure at 988.84 m 3 / day, goat manure at 338.75 m 3 / day and cow manure at 3325.61 m 3 / day.So the total potential of biogas that can be generated is equal to 4653.2 m 3 / day.Keywords: Biogas, local potentials, livestock manure, the total potential of biogas.
PEMANFAATAN UMBI GANYONG SEBAGAI BAHAN BAKAR ALTERNATIF BIOETANOL Kemas Ridhuan; Ahmad Sukamto
TURBO [Tulisan Riset Berbasis Online] Vol 1 No 2 (2012): Desember 2012
Publisher : Universitas Muhammadiyah Metro

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24127/trb.v1i2.649

Abstract

Abstrak : Pengembangan energi merupakan hal yang mendesak untuk zaman sekarang ini viralslot. Salah satu sumber energi alternatif yang potensial yaitu umbi ganyong yang dapat diolah sebagai bahan bakar bioetanol. Bioetanol merupakan bahan bakar pengganti bensin yang dapat diolah dari bahan tumbuh – tumbuhan. Umbi ganyong cukup baik karena kandungan patinya cukup tinggi. Penelitian ini bertujuan untuk mengetahui proses pengolahan umbi ganyong menjadi bioetanol pada proses penyulingan dengan kapasitas bioetanol yang dihasilkan dari umbi ganyong yang yang digunakan.Proses pengolahan umbi gayong dilakukan mulai dari pencucian, lalu umbi gayong digiling atau di parut menjadi bubur tepung, kemudian diperas dan menghasilka pati. Selanjutnya pati ditambah air lalu direbus (proses liquifikasi) kemudian dilanjutkan proses sakarifikasi. Setelah itu dikasih ragi untuk proses fermentasi. Lalu proses akhir pada penyulingan dengan destilasi untuk mendapatkan minyak bioetanol viralslot.Dari umbi ganyong sebanyak 45 kg menghasilkan pati 8,3 kg, pati tersebut ditambah air sebanyak 27 liter, sehingga menjadi 35,3 liter. Selanjutnya pati direbus untuk proses liquifikasi selama 30 menit dengan suhu 105 °C dan dilanjutkan proses sakarifikasi selama 75 menit dengan suhu 95 °C. Setelah selesai turunkan suhu hingga 40 °C dan ditambahkan ragi untuk difermentasi selama 7 hari. Proses penyulingan (distilasi) dengan suhu 78 °C. Hasil dari penyulingan mendapatkan bioetanol sebanyak 3,15 liter.Kata Kunci : Ganyong, energi, bioetanol
ANALISIS KOMPARATIF PROSES PIROLISIS DARI BAHAN SAMPAH PLASTIK DAN BIOMASSA TERHADAP HASIL PRODUK Kemas Ridhuan; Tri cahyo wahyudi; Diego Antonio; Riki Renaldi
TURBO [Tulisan Riset Berbasis Online] Vol 14 No 2 (2025): TURBO: Jurnal Program Studi Teknik Mesin
Publisher : Universitas Muhammadiyah Metro

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24127/trb.v14i2.4890

Abstract

Pyrolysis is a process of heating materials at high temperatures with little or no oxygen to chemically break down materials, to produce products such as fuel and liquid smoke. The purpose of this study was to determine the process, quantity, and characteristics of the products obtained from plastik waste and biomass. This research method uses a barner fueled by LPG gas. Using raw materials of LDPE plastik waste and biomass (rice husk) with a weight of 1.5 kg each. Using a batch type pyrolysis reactor and a straight pipe condenser with a diameter of 1 inch and a length of 4 m. The results showed that the two raw materials produced significantly different product proportions. LDPE pyrolysis produced a liquid product with a volume of 419 (mL) and a solid of 0.825 (kg), and had a higher calorific value of 10648.21 (kJ/kg) than rice husk. Meanwhile, rice husk pyrolysis produced a larger liquid (742 mL) with 0.316 kg of lower solids and a lower calorific value (8761.33 kJ/kg). This difference confirms that the type of feedstock significantly determines the quality and quantity of bio-oil or pyrolysis oil produced, which is crucial for renewable energy development and waste management.
Edukasi Pemanfaatan Sampah Organik Anorganik Melalui Teknologi Pirolisis: Solusi Energi Lingkungan di SMK Raudathul Ulum Kemas Ridhuan; Tri Cahyo Wahyudi; Diego Antonio; Riki Renaldi
SINAR SANG SURYA Vol 9 No 2 (2025): Agustus 2025
Publisher : UM Metro

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24127/sss.v9i2.4264

Abstract

AbstrakSampah merupakan suatu bahan buangan yang tidak berguna dan sangat mengganggu oleh karena itu harus diatasi. Banyak cara yang dapat dilakukan untuk mengatasinya diantaranya melalui penggunaan teknologi pirolisis. Karena dengan proses pirolisis ini sampahnya akan terurai dengan pemanasan dan hasil luarannya akan mendapatkan suatu bahan bakar, baik padat, cair maupun gas. Sehingganya hal ini akan mendapatkan energi dan dapat mengatasi pencemaran lingkungan. Kegiatan pengabdian kepada masyarakat ini bertujuan untuk sosialisasi dan edukasi pemanfaatan sampah organik dan anorganik (plastik) melalui teknologi pirolisis sebagai solusi energi alternatif dan ramah lingkungan di Sekolah Menengah Kejuruan (SMK) Raudathul Ulum. Sosialisasi ini diharapkan dapat meningkatkan kesadaran siswa dan guru tentang pengelolaan sampah yang berkelanjutan serta memperkenalkan potensi teknologi pirolisis dalam mengubah sampah menjadi produk bernilai ekonomi dan energi. Metode yang digunakan meliputi penyampaian materi, demonstrasi alat, produk yang dihasilkan dan sesi diskusi interaktif tanya jawab. Hasil kegiatan menunjukkan antusiasme yang tinggi dari peserta dan pengetahuan serta pemahaman juga kesadaran yang lebih baik tentang sampah dan dampaknya bagi lingkungan serta potensi pirolisis sebagai solusi pengelolaan sampah di lingkungan sekolah dan masyarakat. Juga mendukung program pemerintah “Indonesia bebas sampah tahun 2025” khususnya sampah plastik.