Claim Missing Document
Check
Articles

Recommendation Systems for Online Learning Materials Using Cosine Similarity and Simple Additive Weighting Iska Yanuartanti; Imam Much Ibnu Subroto; Arief Marwanto
Journal of Telematics and Informatics Vol 9, No 1 (2021)
Publisher : Universitas Islam Sultan Agung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/jti.v9i1.

Abstract

This study focuses on searching for teaching materials in order to obtain relevant teaching material information appropriately for further use as material for recommendation of course material to students using the Cosine Similarity method and calculating weighting using the Simple Additive Weighting (SAW) method. With the SAW method, 3 criteria and weight values are determined for each attribute, followed by a ranking process. So that in the end the search results that are ranked in the order of similarity and most relevant can be displayed and then selected and used as recommendations in the student's e-learning learning system. From the results of the study, the Cosine Similarity and SAW methods have provided a fairly good/effective recommendation with an average precision of 0.7867 and a recall of 0.766 so that this method is appropriate to be placed in campus e-Learning
Development of SpO2 Monitoring System for Early Stroke Detection Brama Sakti Handoko; Arief Marwanto; Suryani Alifah
Journal of Telematics and Informatics Vol 9, No 1 (2021)
Publisher : Universitas Islam Sultan Agung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/jti.v9i1.

Abstract

Within this paper, we will discuss about a development process of SpO2 monitoring system that will be used for detecting a patient in the early stage of stroke. This system will measure and compare the SpO2 from both right and left arm at the same time. Stroke patients who experience weakness in the muscles of the one hand can experience different values with hands that do not experience muscle weakness. Stroke patients who are hospitalized with an intravenous infusion in one arm can cause differences in SpO2 values between the right and left fingers. Therefore this measurement method held from that phenomenon. From the monitoring system design, the system should have two sensors to measure the blood saturation, a microcontroller to process the data, and a monitor, buzzer, and micro sd card module to store and display the data. The research shows that the system has been developed and can be used to measure patient’s SpO2 from both hands at the same time, an indicator that will rings when there is an error in the measurement, and a lcd display to show the measurement data. This system also has a microSD card writer to store the measurement data from time to time.
ESTIMATION OF SOFTWARE SIZE USING FUNCTION POINT ANALYSIS ON INVENTORY INFORMATION SYSTEMS Aser Anou; Imam Much Ibnu Subroto; Arief Marwanto
Journal of Telematics and Informatics Vol 9, No 2 (2021)
Publisher : Universitas Islam Sultan Agung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/jti.v9i2.

Abstract

Indicators of good software development achievements are measured measurements on all aspects of software development, including the environment and systems of software. In this paper, indicators of the complexity of web-based software developed by the waterfall method with XML language-based entity database relations. This inventory information system functions as an integrated system with other systems in an integrated information system scope. Function point analysis (FPA) is used as a measuring device that can assess the complexity of components and functions of the software developed. The measurement results show that the overall value of the FPA is 180.83, which indicates that the application of inventory information systems is easy to use with low complexity. While the results of CFP and RCAF calculations also show that this application is quite simple so it is easy to use by various groups.
DESIGN OF ECO GREEN WIND TURBIN USING FUZZY LOGIC ON SAHARA DESERT Ahsraf Ashraf Khalil; Muhamad Haddin; Arief Marwanto; Muhammad Qomaruddin
Journal of Telematics and Informatics Vol 9, No 2 (2021)
Publisher : Universitas Islam Sultan Agung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/jti.v9i2.

Abstract

In development of wind turbine, the government of Libya has assignment Libya electric co. To develop wind turbine in Sahara Desert beginning of 2001. The officer the took a surveying of wind speed and the environment of the Sahara Desert. The surveying has shown that wind speed of Sahara Desert is class  4 and 5. Therefore is suitable to develop wind turbine to produce electrical power for RL (Resistor Load). Based on the argument above, so this research entitled: “Analysis Of Eco Green Wind Turbine Design For Sahara Desert Using  Fuzzy Logic”. The objectives of this research are: to design and development of eco green vertical axis wind turbines (VAWT) in Sahara Desert, to analysis of suitable eco green vertical axis wind turbines (VAWT) in Sahara Desert using MATLAB and to analysis of how fuzzy logic use in wind turbine design. Research model used input process in Matlab simulation and output is the design and analysis of efficiency wind turbines.
Analysis of the Carbon Emissions (Co2) Reduction in Waste Power Plants using Life Cycle Analysis Khalifa Mansour Khalifa; Muhamad Haddin; Arief Marwanto
Journal of Telematics and Informatics Vol 9, No 2 (2021)
Publisher : Universitas Islam Sultan Agung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/jti.v9i2.

Abstract

A Growth in energy demand Electricity in a city will show significant economic growth. Likewise, in the Libyan city of Sirte, economic growth per year is around 6% and with a population growth rate of around 2% per year, the city is struggling to get ahead. Thus, waste generated due to economic activities of the population also increased. While all the garbage is thrown away and not utilized. Separation of types of waste contributes to the economic potential for local governments to manage organized waste. In general, 37% of waste is disposed of in landfills, 8% of which are disposed of in organic form and put into sanitary machines that produce gas. While disposal to open areas around the world includes about 31% of waste with 19% recycled through composting and 11% burned at final disposal. The last recycled process, potentially has increased of CO emission in wasted power plant. To mitigate these situations, depth analysis of the procedure collection of the wasted power plant materials is proposed. In order to reduce carbon pollutant, life cycle analysis has been usage to measure the potential reduction of CO emission in Sirte City of Libya. The performance resuls shows that by using separation materials and life cycle analysis deployment has given significant contributions that able reducing CO emission of has reduced CO Emission. By supply of 1400 tons per day, it can be seen that the electricity production generated is 3.64 MJ which is 2.6% of the production generated from the total waste burned. With the resulting heat of 9.19 MJ, it is a total heat production of 3.7%. Of the emissions produced by the material, PVC contributed the largest contribution to pollution released from the incinerator by 57.7% compared to corrugated box / board which was only 15.2% and / or injection molding by 15.2%. By amounts of 1400 tons wasted assumption, the CO2 that can be generate based on LCA analysis is 2076.87 Kg, moreover, climate change index is equivalent to 3817.58 of CO2 (Kg). Ozon depletion has shown very wonderful grade as show -164.84, meaning that the release of CFCs into the air is significantly reduced. Low carbon index has been shown based on this results, LCA could perform best good treatment for wasted classification arranged with the LCA stage.
PROTOTYPE OF HOSPITAL WASTE MEASUREMENTS INTEGRATED BASED ON ISO 14001 Muhammad Rifai Rifai; Muhammad Qomaruddin Qomaruddin; Arief Marwanto Marwanto; Barry Nur Setyanto Nur Setyanto
Journal of Telematics and Informatics Vol 9, No 2 (2021)
Publisher : Universitas Islam Sultan Agung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/jti.v9i2.

Abstract

One of the water pollution is wastewater that comes from hospitals. The surrounding community can suffer from this disease because hospital wastewater contains quite high organic compounds also contains other chemical compounds as well as pathogenic microorganisms. stabilize the pH. The levels of pH, TDS, and TSS can also be affected by the concentration of wastewater. The higher the dilution rate of the wastewater, the lower the pH, TDS, and TSS levels will also be higher. The results of the test with 4 different water media showed that the pH, TDS and TSS sensors were able to work well where in tap water and coffee showed normal results and stale tea water and betadine water is not normal. The pH, TDS, TSS sensors are able to detect normal water conditions in tap water and coffee with a pH value of 6.89 to 5.41 TDS 179.71 to 279.41 ppm and TSS 1.00 ntu to 16.00 ntu. pH, TDS, and TSS sensors are also able to detect abnormal water conditions in stale tea water and betadine water with a pH ranging from 4.24 – 4.56 TDS 246.11 ppm – 1129 ,54 ppm and TSS 7 ntu – 13 ntu. These values ​​are in accordance with the liquid waste quality standards that have been set in the regulation of the Minister of Health of the Republic of Indonesia number 7 of 2019 concerning hospital environmental health
Analysis of IPv6 jumbogram packages transmission using jumbo frame in mikrotik-based tunneling Yahya Hidayatullah; Arief Marwanto; Imam Much Ibnu Subroto
Indonesian Journal of Electrical Engineering and Computer Science Vol 24, No 1: October 2021
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijeecs.v24.i1.pp329-337

Abstract

The validation and accuracy of internet protocol version 6 (IPv6) performance using jumbo frames is still not perfect, due to peer-to-peer connections testing within the same operating system and between operating systems. Therefore, inaccurate data test results. To mitigated, testing with a wider platform is recommended, a medium-scale network connection is proposed such as metropolitan area networks. In this works, a connection between computer devices connected by three proxy routers are made, with different IPv6 segments on each port. Then each computer device sends traffic data to each other using a traffic-generator application. The first test through three routers without tunnel connection is carried out as the first scenario to compare performance with tunnel-based testing. Three parameters have been used in this test, such as maximum transfer unit (MTU) 1500 bytes, MTU 400 bytes and MTU 9000 bytes. The results of the tests conducted show that the use of jumbo frames using a proxy is less effective, even though it produces a larger throughput when using the MTU 4000, but there is fragmentation in the packet passing through the proxy because the packet passing through the proxy is split into 1500 byte sizes.
PERANCANGAN OTOMASI ALAT INFUS BERBASIS FUZZY LOGIC Lawrence Adi Supriyono; Arief Marwanto; Suryani Alifah
Elkom : Jurnal Elektronika dan Komputer Vol 15 No 1 (2022): Juli : Jurnal Elektronika dan Komputer
Publisher : STEKOM PRESS

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51903/elkom.v15i1.785

Abstract

Starting from the development of medical technology that is increasingly sophisticated and rapidly growing,researchers conduct medical research, namely about patient infusion handling services. In handling patient infusion, currently it is still manual which is carried out by nurses / medical personnel. Infusion handling services for patients still have shortcomings, namely the process of monitoring and replacing infusion fluids which are often late. If the problem is not treated quickly, it can lead to problems, namely the presence of air embolism in the blood vessels (the entry of foreign objects into the blood vessels, for example air). From that problem, the researchers made a new innovation in medical technology in handling infusions automatically and based on IoT. In this study, the smart online infusion device that has been made has good features and is very effective in handling infusions. This device has 3 main functions, namely: it can monitor the remaining infusion, it can change the infusion fluid automatically and it can indicate a blocked patient's infusion. This device already has a method for processing data with fuzzy logic. Media monitoring has been supported by a website that can be controlled remotely and in real time. Tests have been carried out and the effectiveness of the system is found to have an error rate of 0.2% - 0.7% and has an accuracy of 98%. Thus this tool can be used in terms of handling patient infusion automatically.
PERAMALAN POTENSI PLTS DAN PLTB MENGGUNAKAN JARINGAN SARAF TIRUAN Mustaqim; Muhamad Haddin; Arief Marwanto
Elkom : Jurnal Elektronika dan Komputer Vol 15 No 1 (2022): Juli : Jurnal Elektronika dan Komputer
Publisher : STEKOM PRESS

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51903/elkom.v15i1.799

Abstract

Pembangkitan energi harus dapat direncanakan dan disesuaikan. Rencana produksi ditentukan berdasarkan prediksi kebutuhan energi masa depan dan ketersediaan energi baru dan terbarukan. Sistem Pembangkit Listrik Tenaga Surya dan Pembangkit Listrik Tenaga Angin adalah Pembangkit Energi Baru Terbarukan dengan sistem tenaga mandiri, yang memiliki kondisi sumber daya terbaik, dan memiliki prospek aplikasi yang baik. Sehingga perlu adanya penelitian yang mendalam tentang peramalan potensi energi tersebut. Pendekatan penelitian adalah melakukan peramalan potensi energi pembangkit listrik tenaga surya (PLTS) dan pembangkit listrik tenaga angin (PLTB) dengan menggunakan model Jaringan Syaraf Tiruan (JST) Multi Layer Perceptrons (MLP). Hasil penelitian menunjukkan bahwa peramalan potensi energi PLTS dan PLTB Jawa Tengah tahun 2025, PLTS 0,0093% konsumsi energi di Jawa Tengah dan PLTB 0,407% konsumsi energi di Jawa Tengah.
Deteksi Kadar Alkohol Menggunakan Sensor MQ3 Berbasis Website Munaf Ismail; Arief Marwanto; Muhamad Haddin
Infotekmesin Vol 12 No 1 (2021): Infotekmesin: Januari 2021
Publisher : P3M Politeknik Negeri Cilacap

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35970/infotekmesin.v12i1.490

Abstract

According to the Head of the Indonesian National Police (Kapolri) General Idham Azis, the number of deaths from accidents that occurred in 2019 reached 23,530. A total of 40% of the deaths from traffic accidents are caused by human error and the influence of alcohol. The high number of deaths from traffic accidents due to the influence of alcohol is a concern for all of us. Excessive alcohol consumption is dangerous when driving because consuming alcohol will affect a person's temperament and worsen driving behavior by reducing awareness, leading to accidents. A system that is able to detect the alcohol level of a vehicle driver that can be monitored anywhere is needed, as information to alert motorists to the influence of alcohol in order to prevent traffic accidents online and on a web-based basis. Using the MQ-3 sensor for alcohol detection and the ESP8266 processor in WeMos WiFi.  The average percentage error in the measurement of the measured sample was found to have an error value of: 3.6%. Research has also succeeded in reading alcohol levels through websites.
Co-Authors A. M. Harb, Hani Abo-Taleb, Ahmed Agung Satrio Nugroho agus sukarno Agus Suprajitno Agus Suprajitno Ahmed Abo-Taleb Ahmed S. Samra Ahsraf Ashraf Khalil Amir, Afandi Andrianto, Dian Andri Arinan Putra Aser Anou Asri, Mohd Hafizulhadi Mohd ‘Atiq, Muhammad Bakhtiar Indra Kurniawan Berkah Fajar Tamtomo kiono Brama Sakti Handoko Brama Sakti Handoko Daniel Triswahyudi Dedi Nugroho Dedy Syamsuar Deshinta Arrova Dewi Diah Arie WK Eka Nuryanto Budi Susila fajar pujiyanto Fitri Anindyahadi Gunawan Alim Habib ALzaroug Abobaker Wardeko Hadi Pranoto Haikal Satria, Muhammad Hani A. M. Harb Hapsari, Jenny Putri Hariyono, Muhammad Akbar I Nyoman Gede Muliawan Imam Much Ibnu Subroto Iska Yanuartanti Iwan Setiawan Jawarneh, Malik Jenny Putri Hapsari Kamilah Syed Yusof, Sharifah Kamilah, Sharifah khaled jemah basher Khalifa Mansour Khalifa Kuat Supriyadi Laksamana Rajendra Haidar Lawrence Adi Supriyono Lukman Abdul Fatah M Satria M. Gaballah, Waleed M. Haider Abu Yazid M. Haikal Satria M. Haikal Satria M. Ulin Nuha Maivi Kusnandar Mochamad Hadi Saputra Mohamad Habib Ahsan Mohammad Alfian Mudzakir Mohd Hafizulhadi Mohd Asri Muhamad Haddin Muhammad Haikal Satria Muhammad Haikal Satria Muhammad Haikal Satria Muhammad Qomaruddin Muhammad Qomaruddin Muhammad Qomaruddin Muhammad Rifai Rifai Munaf Ismail Munaf Ismail Munaf Ismail, Munaf Mustaqim Musyahar, Ghoni Nashruddin Anwar Nuha, M. Ulin Praditya, Muhammad Irfan Nur Pramono Mukti Wibowo Putra, Arinan Qirom Qirom Renantivani, Alivia Reza Yoga Diputra Riky Maulana Firdaus S Sukiran S. Kamilah S. Y S. Kamilah S. Y, S. Kamilah S. Y S. Samra, Ahmed Sarman Sarman Sarman Sarman Sarman, Sarman Satria, M Satria, M. Haikal Satria, Muhammad Haikal Setyanto, Barry Nur Sharifah Kamilah Syed Yusof Sharifah Kamilah Syed Yusof Sharifah Kamilah Syed Yusof Sharifah Yusof Sigit Prakosa Adhi Nugraha Sonny Hady Winoto Sri Arttini Dwi Prasetyawati Sucipto, Dany Sukarno Budi Utomo Sunaryo Sunaryo Sunaryo, Sunaryo Sunu Arsy Pratomo Suprawikno . Supriyadi, Kuat Suryani Alifah Sutarta Tarta Suyanta Suyanta Tri Basuki Kurniawan Triswahyudi, Daniel Vugar Abdullayev Waleed M. Gaballah Yahya Hidayatullah Yazid, M. Haider Abu Yudha Adi Putra Yudistira Marsya Puvindra Yusof, Sharifah Zakariya Ali Saeid Saeid