Claim Missing Document
Check
Articles

Found 2 Documents
Search
Journal : Reviews in Civil Engineering

ANALISA KUAT TEKAN MORTAR BETON FLY ASH DARI INDUSTRI PLTU TANJUNG JATI B JEPARA DENGAN MENGGUNAKAN PASIR SUNGAI TEMPUR KABUPATEN JEPARA Mochammad Qomaruddin; Ariyanto Ariyanto; Yayan Adi Saputro; Sudarno Sudarno
Reviews in Civil Engineering Vol 2, No 1 (2018): Reviews in Civil Engineering
Publisher : Universitas Tidar

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31002/rice.v2i1.678

Abstract

AbstrakPLTU Tanjung Jati B Jepara merupakan salah satu perusahaan yang bergerak dibidang pembangkit listrik yang memiliki peran besar terhadap kemajuan diberbagai sektor. Hal yang perlu diperhatikan adalah limbah yang dihasilkan oleh PLTU tersebut, salah satu limbah B3 yang dihasilkan adalah fly ash dan bottom ash. Setiap jenis batu bara yang dibakar pasti memiliki prilaku yang berbeda. Limbah yang dihasilkan akan dapat memberi kemanfaatan yang besar apabila mampu mengolahnya menjadi suatu produk yang berguna bagi masyarakat. Adapun tahapan yang akan dilaksanakan dalam penelitian ini adalah: persiapan bahan dan alat, pengujian bahan penyususn, pembuatan benda uji, pengujian benda uji, analisis data dan pembahasan, serta kesimpulan dan saran. Masing-masing campuran benda uji akan diuji pada umur tiga hari, tujuh hari, 14 hari, dan 28 hari. Hasil dari pengujian analisa saringan agregat halus pada pasir tempur diperoleh Modulus Kehalusan Butiran (FM) sebesar 3,805 tergolong kategori butiran yang sangat kasar. Dari percobaan dengan mix design yang telah ditentukan, diperoleh penambahan fly ash dari PLTU Tanjung Jati B Jepara yang menghasilkan kuat tekan mortar tertinggi adalah prosentase Penambahan 20% sampai 30%. Didapat kuat tekan mortar rata-rata yang tertinggi pada campuran semen 80% dengan fly ash 20% sebesar 8,63 MPa dan campuran semen 70% dengan fly ash 30% sebesar 8,57 MPa. Sedangkan yang memiliki kuat tekan terendah pada campuran semen 50% dengan fly ash 50% sebesar 5,05 MPa. Prosentasi fly ash >30% berturut-turut menghasilkan kuat tekan lebih rendah. Kata kunci    : fly ash, pasir Tempur, mortar, kuat tekan.  
PEMANFAATAN LIMBAH BOTTOM ASH PENGGANTI AGREGAT HALUS DENGAN TAMBAHAN KAPUR PADA PEMBUATAN PAVING Mochammad Qomaruddin; Sudarno Sudarno
Reviews in Civil Engineering Vol 1, No 1 (2017): Reviews in Civil Engineering
Publisher : Universitas Tidar

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31002/rice.v1i1.537

Abstract

In connection with the increasing need for paving in the construction world, an effective and economical paving alternative is needed for the community. Paving constituent materials that are still relatively expensive, then the need for other materials that are cheaper without reducing the function and strength of paving itself. Waste is a dangerous material for the environment, such as waste generated PLTU Tanjung Jati B Jepara in the form of waste bottom ash, the result of burning coal that is currently increasingly accumulate because it has not got the right solution. The waste has characteristics such as paving constituents, and in addition to reducing waste that is harmful to the environment. This research is conducted in several stages, starting from the formulation of problem and objectives based on literature problems and reviews, material selection, material testing, object making, object test, data analysis, and conclusion of research result. The results of each test will be analyzed to get the accuracy. The greatest compressive strength results were obtained in the 1PC mix design: 8PS: 0BA: 1KP with a compressive strength of 167,143Kg / cm², and the lowest compressive strength was in the 1PC mix design: 5PS: 3BA: 1KP with a compressive strength of 109,286 Kg / cm². From the results, it can be said that paving in this research can be used in society, although the compressive strength is still not maximal. Keywords: Bottom Ash, Lime, Paving, Strong Press