Claim Missing Document
Check
Articles

Arduino Based Light Intensity Auto Curtain Mursidah; Herry Setiawan; Muhammad Khoiruddin Harahap; Amsar Yunan; Dirja Nur Ilham
Brilliance: Research of Artificial Intelligence Vol. 2 No. 1 (2022): Brilliance: Research of Artificial Intelligence, Article Research February 2022
Publisher : ITScience (Information Technology and Science)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.47709/brilliance.v2i1.1456

Abstract

The rapid advancement of technology has led to significant changes in human life. There are numerous tools available, many of which are intended to make human work easier. Science and technology develop, resulting in improved innovations. Automatic control systems have recently advanced at a dizzying pace in the areas of science and technology. This is shown by the variety of applications, which range from residential to sophisticated equipment. GY-49 MAX44009 Lux Meter GY-49 MAX44009 Lux Meter GY-49 MAX44009 Lux Meter GY-49 MAX44009 GY-49 MAX44009 Lux Meter GY-49 MAX44009 Lux Meter GY-49 MAX44009 Lux Meter GY-49 MAX44009 Lux Meter GY-49 MAX44009 Lux Ambient light for Arduino is a concept that arose in response to the demands of home automation systems. It is Arduino-based and has light intensity controls. The house's tenants will profit from the renovation. Simply said, the curtains are open while the light intensity is 271 - 1000 lux, closed when the light intensity is 1001 lux and closed when the light intensity is 270 lux so that the light entering the room is not too bright and does not create The room felt hot from too much exposure to the sun. In the age of modernization, this tool is supposed to boost the mobility of the house's occupants.
IoT Based Paint Feed Process Monitoring System Implementation Shahrul; Arie Budiansyah; Suryadi; Rudi Arif Candra; Dirja Nur Ilham
Brilliance: Research of Artificial Intelligence Vol. 2 No. 1 (2022): Brilliance: Research of Artificial Intelligence, Article Research February 2022
Publisher : ITScience (Information Technology and Science)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.47709/brilliance.v2i1.1492

Abstract

The increasing level of human mobility causes pets to be abandoned because humans have activities that cannot be left behind or work that must always be done, with this, pets, one of which is a cat, are often hungry because the caregiver is busy working and does not have time to feed the cat. This research is about designing an automatic cat feeder with a periodic monitoring system with a Nodemcu control system with two sensors, namely an Ir sensor and an Ultrasonic sensor with a telegram notification output. the working principle of the Sensors Ir 1 and 2 will detect a cat, if it hits the cat, the place for giving food and drink will open automatically while ultrasonic sensors 1 and 2 are for monitoring food and drink if food and drink do not hit the ultrasonic sensor it will enter a notification that the food and drink had run out. the conclusion of making this tool is to make it easier for cat owners to automatically feed cats.
PERANCANGAN APLIKASI PARIWISATA MOROTAI BERBASIS ANDROID Miswar Papuangan; Exsa Rava Iwisara; Imam Hizbullah; Faisal Thaib; Dirja Nur Ilham
Jurnal Teknik SILITEK Vol. 2 No. 01 (2022)
Publisher : Fakultas Teknik Universitas Pasifik Morotai

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51135/jts.v2i1.46

Abstract

Kabupaten Pulau Morotai merupakan salah satu Kabupaten yang berada di Provinsi Maluku Uatara. Kabupaten Pulau Morotai banyak dijumpai objek pariwisata yang menjanjikan. Menurut data survey oleh Badan Pusat Statistik Kabupaten Pulau Morotai terdapat 23 tempat wisata di Kabupaten Pulau Morotai. Aplikasi mobile berbasis android digunakan sebagai media untuk mengakses serta mendapatkan informasi terkait daftar tempat wisata serta fitur lainnya yang ada di Kabupaten Pulau Morotai. Pariwisata yang tersedia berupa objek wisata pantai, sejarah, dan wisata bahari. Tujuan dari penelitian ini adalah untuk merancang dan membangun aplikasi pariwisata berbasis android untuk memberi kemudahan para wisatawan lokal maupun mancanegara dalam mengakses informasi serta mengunjungi objek pariwisata yang ada di Kabupaten Pulau Morotai. Perancangan aplikasi menggunakan metode Software Development Life Cycle (SDLC). Metode SDLC digunakan untuk proses pembuatan dan pengubahan sistem serta metodologi yang digunakan untuk mengembangkan sistem rekayasa perangkat lunak. Pengujian aplikasi menggunakan black box testing. Black box testing merupakan teknik pengujian dengan mengeksekusi unit, kemudian diamati apakah hasil output dari unit sudah sesui dengan proses yang diinginkan atau tidak sesuai. Hasil perancangan serta pengujian aplikasi yang telah dilakukan, yakni aplikasi pariwisata Morotai berbasis android. Aplikasi dapat diakses dengan menggunakan android dari smartphone dan mampu memberikan informasi terkait objek wisata yang ada serta membantu pemerintah dan instansi terkait dalam mempromosikan Pariwisata di Kabupaten Pulau Morotai.
Internet of Things Based Automatic Visitor Counter Dina Afriani; Dirja Nur Ilham; Khairuman; Mohammed Saad Talib; Muhammad Khoiruddin Harahap
International Journal of Multidisciplinary Sciences and Arts Vol. 1 No. 1 (2022): International Journal of Multidisciplinary Sciences and Arts, Article August 20
Publisher : Information Technology and Science (ITScience)

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (668.372 KB) | DOI: 10.47709/ijmdsa.v1i1.1615

Abstract

In modern times, there are many recreational areas including, Gunung Lampu Tapaktuan Tourism. This destination is very crowded with local and foreign tourists. This study aims to determine the number of visitors, optimize the place, evaluate the area's attractiveness, and know how the tool works using the experimental method. Furthermore, the Internet of Things (IoT) connects physical objects with electronics, software, sensors, and networks that make these objects collect and transmit data. From the results of the trials that have been carried out, every passing visitor is read by an ultrasonic sensor and then sent to the Thingspeak server using the internet network and the registered apikey. The ultrasonic sensor sends data that has been read to the thing peak channel that is connected to the device so that the results of the monitoring are the number of visitors in the form of graphs and tables. The results of testing the tool for seven days contained a total of 1,596 manual data, 1,582 people were detected, and 14 people were not detected. While visitors came out there were 1,559 people caught, and 37 people were not seen. From the seven days of testing, 99.12% of incoming visitors were detected and 97.68% of outgoing visitors were detected. So that it can be concluded, that this tool has been functioning correctly.
Implementation of Vibration Sensor and Pin Lock using Keypad for Charity Box Security Dirja Nur Ilham; Rudi Arif Candra; Arie Budiansyah; Erwinsyah Sipahutar; Muhammad Khoiruddin Harahap; Fera Anugreni
International Journal of Multidisciplinary Sciences and Arts Vol. 2 No. 1 (2023): International Journal of Multidisciplinary Sciences and Arts, Article January 2
Publisher : Information Technology and Science (ITScience)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.47709/ijmdsa.v1i2.2050

Abstract

Security is a state in which people or things feel safe from ominous or unsettling hazards, which will then cause them to feel at ease and comfortable. There are many ways to achieve security, one of which is via utilizing and deploying technology. The use of security technology has advanced quickly in recent years, from low-tech to high-tech techniques. By using Arduino as a circuit controller to process input from a vibrating sensor and 4x4 keypad, output to a solenoid as a charity box lock, and a buzzer that serves as an alarm in case of theft, technological or automated methods can reduce charity box theft and also increase the security of charity box locks. The charity box security system tool is made to prevent the theft of charity boxes, which frequently happens in mosques. If someone tries to steal the charity box, an alarm will go off, and you need a pin that has been programmed on an Arduino Ide and stored in EEPROM to open the charity box cover, so this tool can stop charity box theft in mosques.
ANALISIS EFISIENSI ENERGI PADA APLIKASI MEDIA SOSIAL MENGGUNAKAN PERANGKAT KOMUNIKASI BERGERAK Hardisal; Rudi Arif Candra; Dirja Nur Ilham; Khairuman; Erwinsyah Sipahutar
Majalah Ilmiah METHODA Vol. 9 No. 3 (2019): Majalah Ilmiah METHODA
Publisher : Universitas Methodist Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.46880/methoda.Vol9No3.pp125-131

Abstract

Perkembangan teknologi perangkat bergerak mulai mengarah ke dimensi yang lebih kecil serta pembuatan aplikasi yang cepat, terkoneksi dan efisien. Dengan mengecilnya dimensi, efisiensi energi aplikasi perangkat bergerak menjadi sangat penting. Aplikasi ponsel berkembang sangat cepat, seluruhnya terhubung pada aplikasi seperti sosial media, hal ini menjadi kebutuhan sehari-hari. Baterai memasok kekuatan daya yang terbatas pada perangkat komunikasi bergerak, social media harus meminimalisir sinyal untuk mempertahankan konsumsi daya serendah mungkin. Rangkaian eksperimental dikembangkan dengan menggunakan mikrokontroller yang dapat mengukur konsumsi energy pada perangkat smartphone android pada jaringan 802.11. Hasil eksperimen menunjukkan bahwa whatsapp mengkonsumsi daya lebih kecil dari aplikasi lainnya pada proses standby dan chat, yang kedua aplikasi Instagram dan skype mengkonsumsi daya tinggi. Untuk proses keseluruhan youtube dan tik tok mengkonsumi paling tinggi.
COMPARISON OF MAX30100 BLOOD OXYGEN DETECTOR RESULTS WITH SMART WATCH Dirja Nur Ilham; Muhammad Khoiruddin Harahap; Rudi Arif Candra; Arie Budiansyah; Herry Setiawan
Deli Sains Informatika Vol. 2 No. 2 (2023): Artikel Riset Juni 2023
Publisher : LPPM Universitas Deli Sumatera

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

The development of modern component technology makes it possible to create practical, compact, reliable, effective, and efficient equipment/instrumentation. The health sector as an essential component of life is also not spared from technological support. One significant indicator of oxygen supply in the body is oxygen saturation. Because oxygen saturation can show whether hemoglobin can bind oxygen or not. So that the lack of oxygen which is at risk of damage to essential organs in the body can be overcome. By using the max30100 sensor is a detection tool that will be used to detect oxygen levels with saturation levels, namely, normal and abnormal, and the tool is controlled by Arduino Nano as the controller of the entire circuit. With the output displayed on the Oled LCD, ten tests have been carried out. times and compared with the results using a Smart Watch with an average difference of 0.73%.
Application of Artificial Intelligence in Mechanical Engineering Mohammed Ridha H Alhakeem; Dirja Nur Ilham
Brilliance: Research of Artificial Intelligence Vol. 2 No. 3 (2022): Brilliance: Research of Artificial Intelligence, Article Research November 2022
Publisher : ITScience (Information Technology and Science)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.47709/brilliance.v2i3.1719

Abstract

The use of artificial intelligence (AI) is becoming more prevalent across many industries. Examples include intelligently based control, intelligently based mechanical systems, pattern recognition-based systems, and knowledge processing. Method/Statistical Analysis: In this paper, an extensive review was conducted on the applications of ANN in intelligent mechanical engineering systems, including fault diagnosis in machines, mechanical structure analysis, and geometry modelling of mechanical structures, mechanical design, and its optimization. Findings: The adaptation of artificial neural networks (ANN), particularly in the field of mechanical engineering, is still in its early stages of development. This paper highlights the different ways artificial neural networks (ANNs) are used in intelligent-based systems, as well as the potential for reducing costs and time and obtaining more efficient systems for mechanical-based design and defect detection. Application/Improvements: This work will be improved in the future by adding more AI applications to the design of mechanically based systems.
Designing an IoT-based footstep counter for sports shoes Vikra Aditya; Dirja Nur Ilham; Fauzun Atabiq; Dina Miftahul Jannah; Muhammad Khoiruddin Harahap
JATAED: Journal of Appropriate Technology for Agriculture, Environment, and Development Vol. 1 No. 1 (2023): JATAED: Journal of Appropriate Technology for Agriculture, Environment, and Dev
Publisher : LEMBAGA KAJIAN PEMBANGUNAN PERTANIAN DAN LINGKUNGAN (LKPPL)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.62671/jataed.v1i1.2

Abstract

Shoes are general footwear that can be used when exercising, working, formal events, or just to sweeten your appearance. Shoes used for sports have a slightly different shape from shoes in general, in terms of covering the left and right sides, the base, and the design, but most shoes do not have a device to count the steps taken. To overcome this, researchers have created a tool in shoes that can count the user's footsteps while exercising. A step counter on shoes based on the internet of things uses NodeMCU and an IR sensor which functions to detect every step of the shoe wearer. The result of the detected step count will be displayed in the blynk application. NodeMCU and IR sensors will be connected to the Blynk application using the internet network. When the step counter on the shoe and the hotspot are turned on, the results of the foot count will appear on the Blynk application on the smartphone. Footstep data detected by the IR sensor corresponds to the number of steps counted manually. The test results from a 150-meter step counter, obtained results of 207 steps in 3 minutes when walking casually, 223 steps in 1 minute 30 seconds when walking fast, and 264 steps when running in a period of 1 minute 15 seconds.
Implementation of the Internet of Things on a Wheelchair using the MPU6050 Sensor Maqfirah; Fera Anugreni; Dirja Nur Ilham; Muhammad Khoiruddin Harahap; Harmayani Harmayani
JATAED: Journal of Appropriate Technology for Agriculture, Environment, and Development Vol. 1 No. 1 (2023): JATAED: Journal of Appropriate Technology for Agriculture, Environment, and Dev
Publisher : LEMBAGA KAJIAN PEMBANGUNAN PERTANIAN DAN LINGKUNGAN (LKPPL)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.62671/jataed.v1i1.17

Abstract

The large number of family activities carried out outside the home makes them always feel worried and anxious about the activities carried out by the elderly at home. This will be a problem when the elderly carer has important activities outside the home and has to leave the elderly person alone. If an elderly person falls, the sensor will detect the pressure of the fall and reduced balance in the elderly wheelchair. Then the MPU6050 sensor will send input to the nodemcu which controls the entire circuit for processing by sending a signal to the Blynk application as an output processor with a notification in the form of a short message that the elderly person has fallen, from the wheelchair which is displayed on the user's cellphone which has the blynk application installed. With this tool, it is easier for elderly caretakers to know the condition of elderly people when they are in a wheelchair, and it is also quicker to help elderly people if they fall from a wheelchair by notifying them via message notifications in the Blynk application.