Garuda - Garba Rujukan Digital

Article Per Year (5 Year)

All

IPTEK Journal of Proceedings Series

jps
Website

Published by Institut Teknologi Sepuluh Nopember Surabaya

ISSN : 23546026 EISSN : - DOI : -

Core Subject : Science,

Computer Science & IT

IPTEK Journal of Proceedings Series publishes is a journal that contains research work presented in conferences organized by Institut Teknologi Sepuluh Nopember. ISSN: 2354-6026. The First publication in 2013 year from all of full paper in International Conference on Aplied Technology, Science, and Art (APTECS). It publish one time a year after the held of APTECS event.

Arjuna Subject : -

Articles 1,079 Documents

29 30 31 32 33

Simulation of Solar-Assisted Single Stage Absorbtion Chiller as Ice Maker Based on MATLAB Ridho Hantoro; Dwi Ganef Janesa
IPTEK Journal of Proceedings Series No 1 (2015): 1st International Seminar on Science and Technology (ISST) 2015
Publisher : Institut Teknologi Sepuluh Nopember

In this research, the system is described in the two-dimensional form to simplify the completion and modeling. There are various kinds of components, among others: evaporator, condenser, Solution Heat Exchanger (SHX), absorber, generator (including solar collector), pumps, and expansion valve.

Design of a Plastic Shredder Machine Nuri Aryani; Dede Buchori; Albertus Budi Setiawan
IPTEK Journal of Proceedings Series No 3 (2019): International Conference on Engineering Technology Advance Science and Industrial Appli
Publisher : Institut Teknologi Sepuluh Nopember

Waste is one of the problems that still unsolved especially for plastic waste. If the handling of plastic waste cannot be done well, it will have effect for the long period. The effect of plastic waste is environment problems such as: chain food disturb, contaminate ground water, air pollution, extinction anima, poisonous soil, and act. One of the handling for plastic waste is recycling. It starts with separating plastic waste by kind of plastic. The next step is crush it until it becomes small flakes. The Small flakes can be directly used for making product such as pot, filler material for mixing with road asphalt or plastic granulate for making a product by injection mold or extraction. In order to handle plastic waste into small flakes, plastic shredder can be used to realize the making of prototype of plastic shredder machine. It starts with design process. The design process of the prototype of plastic shredder machine uses the method of design Pahl and Beitz method that consists of design and describes job, design product concept, embodiment design, and design of detail. The plastic shredder machine consists of blades or cutter, transmission element with the shape of spur gear, electric motor, and body of machine. The kind of waste plastic for shred is LDPE, HDPE, PP, PSBased for the design of plastic shredder machine can produce small flake with the dimension of about 10 mm long and 1 mm wide.

Remote Sensing Analysis Using Landsat 8 Data For Lithological Mapping - A Case Study In Mount Penanggungan, East Java, Indonesia Hendra Bahar; Muhammad Taufik
IPTEK Journal of Proceedings Series No 2 (2017): The 2nd Internasional Seminar on Science and Technology (ISST) 2016
Publisher : Institut Teknologi Sepuluh Nopember

Abstract ¾ Mount Penanggungan is one of the volcanoes that located in East Java Province, Indonesia, with the current status is a sleeping volcano. Although Mount Penanggungan is not active, it still make an interesting investigation in geological survey, especially to identify the lithological units, due that less researchers took place in Mount Penanggungan. Geological survey and investigaton can describes the information about physically condition of some land or region, with the result is Lithological Map of Mount Penanggungan. Remote sensing imagery, such as Landsat 8 Satellite imagery data series has been used widely in geology for mapping lithology in general. Remote sensing provides information of the properties of the surface exploration targets that is potential in mapping lithological units. Remote sensing technique are one of the standard procedures in exploration geology, due to it is high efficiency and low cost. Lithological mapping in Mount Penanggungan area is carried out by using Landsat 8 Satellite imagery data with image enhancement techniques, including RGB (red, green, blue) band composite, and combine it with Indonesian Surface Map data that will makes an existing Lithological Map of Mount Penanggungan. The results of this study showed the distribution of the lithological units in Mount Penanggungan, which the units are; vulcanic breccia, tuff breccia, and andesitic lava.

An Investigation on the Adaptive Modal Combination Procedure for Seismic Evaluation of Buildings Considered Soil Structure Interaction Hong-An Nguyen; Chatpan Chintanapakdee
IPTEK Journal of Proceedings Series No 6 (2017): The 3rd International Conference on Civil Engineering Research (ICCER) 2017
Publisher : Institut Teknologi Sepuluh Nopember

Nonlinear response history analysis (NL-RHA) is a powerful tool for seismic analysis of structures. The seismic performance of structures can be estimated accurately due to a set of ground motions. However, NL-RHA is an onerous task to estimate seismic demands due to its complexity for practical design applications. Therefore, nonlinear static procedures (NSPs), which are rooted in structural dynamic theory, are developed as an alternative to rigorous NL-RHA. NSPs are now widely used in engineering practice to evaluate seismic responses of structure in the inelastic range. The main objective of this study is to assess the bias and accuracy of the adaptive modal combination (AMC) procedure, which is modified from the modal pushover analysis (MPA) procedure, for seismic evaluation of buildings. Three-, 9-, 18-storey buildings were analyzed due to two sets of strong ground motions having 2% and 10% probability of being exceeded in 50 years. The influence of soil-structure interaction in the analysis was also considered by using Beam-on-Nonlinear-Winkler-Foundation modeling. The assessment is based on comparing seismic displacement demands such as target roof displacements, peak floor displacements and inter-storey drifts. The AMC estimates are compared to results from nonlinear response history analysis (NL-RHA) and results from AMC procedure considered only first mode (AMC- 1st mode). The obtained results show that the AMC procedure provides reasonably accurate results in estimating seismic demands of studied buildings.

PENGATURAN HAK PENDIDIKAN DISABILITAS (sebagai persiapan penerapan teknologi berkemanusiaan) Wiwik Afifah; Syofyan Hadi
IPTEK Journal of Proceedings Series No 5 (2018): Seminar Nasional Teknologi dan Perubahan (SEMATEKSOS) 3 2018
Publisher : Institut Teknologi Sepuluh Nopember

Penyandang disabilitas di Indonesia, sebagian besar hidup dalam kondisi rentan dan pengurangan atau penghilangan hak penyandang disabilitas. Untuk mewujudkan kesamaan hak dan kesempatan bagi penyandang disabilitas menuju kehidupan yang sejahtera, mandiri, dan tanpa diskriminasi diperlukan peraturan perundang-undangan yang dapat menjamin pelaksanaannya.Hak untuk memperoleh pendidikan merupakan hak asasi manusia yang dijamin dalam Pasal 31 ayat (1) Undang-Undang Dasar Negara Republik Indonesia Tahun 1945. Namun dalam prakteknya, anak penyandang disabilitas sangat rentan untuk memperoleh perlakuan diskriminatif dalam memperoleh hak-haknya, khususnya hak atas pendidikan. Hal tersebut disebabkan oleh ketidak-samaan kondisi fisik atau psikis anak penyandang disabilitas. Anak penyandang disabilitas membutuhkan perlindungan dalam memperoleh pendidikan. Pendidikan yang diikuti oleh penyandang disabilitas berguna sebagai bekal dalam kehidupan yang semakin meng-globalberbasis teknologi.Berdasarkan hal tersebut, penulis memaparkan tentang bagaimana pengaturan mengenai hak pendidikan bagi penyandang disabilitas. Metode penelitian yang dipergunakan adalah penelitian yuridis normative. Kesimpulan dari artikel adalah hak pendidikan penyandang disabilitas telah diatur baik dalam konvensi internasional hak asasi manusia, International Covenant on Economic, Social, and Cultural Rights dan Convention on the Rights of Person with Disabilities dengan Resolusi 61/106, Pasal 28 C ayat (1) dan Pasal 28 E ayat (1) UUD NRI Tahun 1945.Hak atas pendidikan juga telah diatur dalam Undang-Undang Nomor 39 Tahun 1999 tentang Hak Asasi Manusia khususnya Pasal 12. Secara spesifik perlindungan hak penyandang disbilitas termasuk hak pendidikan terdapat dalam Undang-Undang Nomor 8 Tahun 2016 Tentang Penyandang Disabilitas. Selanjutnya, pengaturan di tingkat propinsi yaitu Peraturan Daerah Nomer 3 Tahun 2013 Tentang Perlindungan Dan Pelayanan Penyandang Disabilitas Di Jawa Timur. Begitu pula dengan Peraturan Gubernur Nomor 6 Tahun 2011 Tentang Penyelenggaraan Pendidikan Inklusi.

Resistivity Tunnel Monitoring System Firman Syaifuddin; Amien Widodo; Muhammad Nurul Puji
IPTEK Journal of Proceedings Series No 2 (2018): The 2nd Conference on Innovation and Industrial Applications (CINIA 2016)
Publisher : Institut Teknologi Sepuluh Nopember

The development of an urban area must be supported by the construction of infrastructure such as public facilities. The crowded of urban area in Indonesia increasingly requires the existence of a mass transportation mode that is capable of carrying passengers in large amounts and relatively quickly. Recently Jakarta has proposed the construction of the MRT (Mass Rapid Transit) with underground lines utilize tunnel technology. Tunnel system was chosen as an alternative solution socioeconomic problems in the land problem and conditions of the existing urban planning. The geographical position of Indonesia is located in the equatorial zone which is the weather conditions have high levels of weathering and moisture or high humidity, this condition may result in changes in the level of strength of rock of the tunnel system in a relatively fast. In the construction of public facilities with the tunnel system need monitoring system the condition of the tunnel to avoid the dangers that may occur due to the failure of a tunnel system. To determine the level of moisture and water content in the rock or overburden a tunnel can be determined by utilizing the resistivity method. Resistivity method is a geophysical method that measures the magnitude of the resistivity of a material. Changes in moisture content and humidity levels of rock or soil in an area can be indicated by a change in the value of resistivity of rock or soil. In the measuring of the resistivity method needed good design to provide accurate information, especially if it will be used as a monitoring system for a tunnel. Development of measuring the resistivity method, and in particular data processing is done with the aim of optimizing the measurement process and the measurement results can be interpreted easily and be able to demonstrate a phenomenon that occurs in rocks or soil cover tunnel.

Solving Course Timetable Problem by using Integer Linear Programming (Case Study IE Department of ITS) Fakher Shwan Rafeek; Nurhadi Siswanto
IPTEK Journal of Proceedings Series No 1 (2015): 1st International Seminar on Science and Technology (ISST) 2015
Publisher : Institut Teknologi Sepuluh Nopember

Making IE department of ITS course timetable by determine the hard and soft constraints then develop an integer programming (ILP) model method to solve this NP-complete problem of Timetabling for solving Hard constraints Assignment problem and to solve the Soft constraints use Penalty Algorithm. Use LINGO software for solving suggested mathematical model to get the final results. Then do numerical analyzes for that results. Finally it achieves the goal for solving the Course Timetable. And get feasible solution of timetable as well as it gets the best required objective what it can get from the case study which is 356 events and it reduces the time of getting one timetable to be just one hour after it was at least 2 weeks.

Evaluation on green concept of high-rise building design and its architectural feasibility Johanes Krisdianto; FX Teddy Badai Samodra; Mudji Irmawan
IPTEK Journal of Proceedings Series No 3 (2017): 8th International Conference on Architecture Research and Design 2016
Publisher : Institut Teknologi Sepuluh Nopember

Recently, the feasibility study on occupancy, building design and its operation are critical issues in building certification. This study evaluates green concept of a high-rise building, Grand Darmo Suite Hotel Surabaya-an awarded on green building as case study, to the architectural feasibility. The modeling using Ecotect Analysis and CFD Fluent program combined with field observation were also conducted to evaluate the building performance. Based on building simulation and the walkthrough survey and audit, the results show that the building has architectural aspect and advantage, it remains in consistent way between the initial planning and the development. In general, the green concept is implemented in organization of space and its use where they are in accordance with the functions and appropriate to building permit. Furthermore, the condition and quality of the finishing material do not interfere the comfort of occupancy.

Functional Condition Rating Segment Sragen Ring Road South, Central Java Province Rendy D. Pangesti; Ary Setyawan; Budi Yulianto
IPTEK Journal of Proceedings Series No 6 (2017): The 3rd International Conference on Civil Engineering Research (ICCER) 2017
Publisher : Institut Teknologi Sepuluh Nopember

Assessment of pavement condition is functionally the most important aspect in determining road maintenance and repair activities, so that the financing can be monitored properly. There are two methods in handling the road assessment, ie visually and using tools. Visual assessment can use PASER and PCI. While IRI is a road assessment using Roadroid (Android Smartphone App) tool, where the tool will be used as national reference to get IRI value, because the cost is cheaper and effective. Therefore there needs to be a correlation between the three methods. Correlation in this research is divided into three, namely the correlation of PASER value with PCI, PASER with IRI, and PCI with IRI. The research location used as research object is South Ring Road Sragen. The result of the research was obtained, road assessment using PASER method with PCI resulted correlation value of pearson 0,51. Assessment of PASER with IRI has a correlation value of pearson -0,14. While the value of PCI with IRI yield correlation value pearson -0,23. The value of the correlation coefficient between PASER and PCI has the highest value, since it has a nearly equal assessment approach by measuring the damage visually. The correlation of PCI with IRI is higher than PASER with IRI, thus proving that PCI assessment is more recommended because it can accommodate all types of road damage.

eSport Building Design Role In Introducing Its Activities Y E Sutantio; E Poedjioetami; W W Widjajanti
IPTEK Journal of Proceedings Series No 6 (2018): International Conference on Advanced Engineering and Technology (ICATECH) 2018
Publisher : Institut Teknologi Sepuluh Nopember

esport has the meaning of electronic sports, which the aspect of the sport is all facilitated by the electronic system. The definition of esport is a sport that does not compete physically, but is more concerned with strategy and competed online via computer, so players from each team can compete without face to face. In its development, esport enthusiasts from year to year increase, but unfortunately this is not balanced with the existence of facilities that can support the development of esport. Some facilities are often used is a place with different functions. There is still no building with a special function that is used for esport activities. The purpose of this research is to create a building facility that can accommodate the esport activities. Use method / application micro-concept of form is transformative, dynamic macro concept, and modern architectural theme, Result of building design that can present the function esport visually. So that building can be characteristic for esport building.

Page 31 of 108 | Total Record : 1079

29 30 31 32 33

Filter by Year

2014 2023

Filter By Issues

All Issue No 1 (2023): The 1st International Conference on Community Services and Public Policy (ICCSP) 2022 No 6 (2020): 6th International Seminar on Science and Technology 2020 (ISST 2020) No 6 (2020): 6th International Seminar on Science and Technology 2020 (ISST 2020) - IN-PRESS No 7 (2020): The 2nd International Conference on Global Development (ICODEV) 2020 No 5 (2020): The 8th International Conference on Transportation & Logistics (T-LOG 2020) No 4 (2020): 2nd Maritime Safety International Conference (MASTIC) 2020 No 2 (2020): IConISE & ACISE 2020 No 3 (2020): International Conference on Management of Technology, Innovation, and Project (MOTIP) 2 No 1 (2020): The 1st International Conference on Business and Engineering Management (IConBEM) No 1 (2019): 4th International Seminar on Science and Technology 2018 (ISST 2018) No 2 (2019): The 3rd Geomatics International Conference (GEOICON) 2018 No 4 (2019): Seminar Nasional Kimia (SENAKI) XV 2019 No 6 (2019): The 1st International Conference on Global Development (ICODEV) No 5 (2019): The 1st International Conference on Business and Management of Technology (IConBMT) No 3 (2019): International Conference on Engineering Technology Advance Science and Industrial Appli No 5 (2018): Seminar Nasional Teknologi dan Perubahan (SEMATEKSOS) 3 2018 No 2 (2018): The 2nd Conference on Innovation and Industrial Applications (CINIA 2016) No 1 (2018): 3rd International Seminar on Science and Technology (ISST) 2017 No 6 (2018): International Conference on Advanced Engineering and Technology (ICATECH) 2018 No 3 (2018): International Conference on Industrial and System Engineering (IConISE) 2017 No 4 (2018): The 3rd International Conference On Materials and Metallurgical Engineering and Technol No 6 (2017): The 3rd International Conference on Civil Engineering Research (ICCER) 2017 No 4 (2017): 2nd International Seminar on Chemistry 2016 No 3 (2017): 8th International Conference on Architecture Research and Design 2016 No 2 (2017): The 2nd Internasional Seminar on Science and Technology (ISST) 2016 No 1 (2017): The 2nd International Conference on Civil Engineering Research (ICCER) 2016 No 5 (2017): Simposium I Jaringan Perguruan Tinggi untuk Pembangunan Infrastruktur Indonesia (2016) No 1 (2015): 1st International Seminar on Science and Technology (ISST) 2015 Vol 1, No 1 (2014): International Seminar on Applied Technology, Science, and Arts (APTECS) 2013 More Issue

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
-

Contact Email
-

Phone
-

Journal Mail Official
-

Editorial Address
-

Location
Kota surabaya,

Jawa timur

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name -

Contact Email -

Phone -

Journal Mail Official -

Editorial Address -

Location Kota surabaya, Jawa timur INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
-

Contact Email
-

Phone
-

Journal Mail Official
-

Editorial Address
-

Location
Kota surabaya,

Jawa timur

INDONESIA