Claim Missing Document
Check
Articles

Found 38 Documents
Search

PERENCAANAAN ULANG TATA LETAK MENGGUNAKAN METODE SLP (SYSTEMATIC LAYOUT PLANNING) DAN CRAFT (COMPUTERIZED RELATIVE ALLOCATION OF FACILITIES TECHNIQUES) PADA PABRIK PLYWOOD TUNAS SUBUR PACITAN Darsini, Darsini; Adji, Setyo; Wijianto, Wijianto
JURNAL MUHAMMADIYAH MANAJEMEN BISNIS Vol 4, No 1 (2023): Jurnal Muhammadiyah Manajemen Bisnis (JMMB)
Publisher : Universitas Muhammadiyah Jakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24853/jmmb.4.1.19-26

Abstract

Penelitian ini bertujuan untuk memberikan perencanaan ulang tata letak pabrik dengan menggunakan metode SLP (Systematic Layout Planning) dan CRAFT (Computerized Relative Allocation of Facilities Techniques). Penelitian ini bersifat Descriptive Survei Research dimana data dikumpulkan dengan teknik wawancara terhadap pihak yang mengerti keseluruhan proses dan data yang dibutuhkan. Hasil rancangan tata letak menggunakan metode CRAFT memiliki total momen perpindahan sebesar 3.388.270 meter/bulan, total biaya material handling RP. 29.071.357,- /bulan, dan memiliki tipe aliran tidak beraturan, sedangkan SLP memiliki total momen perpindahan sebesar 3.093.558 meter/bulan, total biaya material handling Rp. 26.542.728,-/bulan, serta memiliki tipe aliran tidak beraturan. Oleh karena itu, Layout usulan yang dapat dijadikan perencanaan ulang pada Pabrik Plywood Tunas Subur Pacitan adalah layout usulan SLP (Systematic Layout Planning).
Penerapan Total Productive Maintenance Guna Mengoptimalkan Ketersediaan Mesin di PT. ATMI Solo Darsini, Darsini; Aditya Prabantara, Yonatan
Journal of Applied Mechanical Engineering and Renewable Energy Vol 4 No 1: February 2024
Publisher : Indonesian Society of Applied Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.52158/jamere.v4i1.792

Abstract

Optimal productivity needs to be supported by the availability of machines that are always ready to produce. The condition that needs to be maintained is that the machine does not stop frequently due to damage and causes the continuity of production to be hampered. According to the Japan Institute of Plant Maintenance (JIPM), the level of machine availability (availability) is said to be ideal when it exceeds 90%. At PT. ATMI Solo, 23.8% of 21 CNC machines still have availability percentage below 90%, namely Salvagnini S4 punching machine (69%), Starrag CF100 milling machine (79%), Trubend 3180 bending machine (82%), milling machine YCM TV 158B (82%), and Trumatic TC 200 R punching machine (89%).The main factor is the low availability of machines at PT. ATMI Solo is high machine downtime due to a breakdown. Therefore, it is necessary to implement Total Productive Maintenance (TPM) to optimize the availability of these machines. The implementation of TPM is Training and Education, Autonomous Maintenance, Planned Maintenance, and TPM in Administration (TPM in Administration), especially in the spare part Logistics section. The implementation of the TPM succeeded in increasing the availability percentage above 90% (based on data from the 2022 General Maintenance Daily Report), namely the Salvagnini S4 punching machine (94.13%), Starrag CF100 milling machine (96.36%), Trubend 3180 bending machine (99, 70%), YCM TV 158B milling machine (99.97%), and Trumatic TC 200 R punching machine (99.88%).
Analisis Kerusakan Dump Truck HD785-7 Menggunakan Metode Pareto, FMEA dan SCAT Darsini, Darsini; Susanto, Galih
Journal of Applied Mechanical Engineering and Renewable Energy Vol 4 No 1: February 2024
Publisher : Indonesian Society of Applied Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.52158/jamere.v4i1.793

Abstract

PT Saptaindra Sejati (SIS) is a company currently known as a company engaged in mining Services. Companies are required to meet predetermined production targets to meet production targets must be supported by good production unit performance. This research discusses the damage to the Dump Truck HD785-7 production unit which causes a decrease in performance so that the company's productivity is not optimal. To reduce or prevent the failure of the HD785-7 Dump Truck, it is necessary to implement an improvement in good operation and maintenance. The methods used to overcome the poor performance of production units are Pareto method, Failure Mode and Effect Analyze (FMEA) and Systematic Cause Analysis Technique (SCAT). With the Pareto method to create a bar graph based on the number of events. The FMEA method of failure that occurs can be identified to prioritize. The SCAT method is to be able to analyze the system failure of several sub-systems, the levels below and to see the failure of components. From the results of data processing, it is known that there are 3 defects that have the greatest influence on the performance of the low power 03 damage unit with RPN 360, damage to work lights with RPN 216 and engine damage cannot be started with RPN 189.
Analisis Waktu Baku Proses Menjahit pada Stasiun Kerja Sawing di CV. SAA Garment Darsini, Darsini; Romadhon, Fadli Nuzul
Metrik Serial Teknologi dan Sains Vol. 3 No. 2 (2022): September 2022
Publisher : Konsorsium Cendekiawan Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51616/teksi.v3i2.348

Abstract

CV SAA adalah perusahaan yang bergerak di bidang garmen. Perusahaan ini memiliki beberapa produk seperti merek Cressida, Nevada, Cole. Kegiatan proses produksi dimulai saat pembeli memesan produk dari CV SAA, dalam proses ini dicantumkan jenis produk, spesifikasi, jumlah, dan waktu proses produk. Tujuan dari penelitian ini adalah untuk menghitung waktu standar dalam proses produksi di 6 stasiun kerja penggergajian untuk menentukan waktu standar dan kapasitas produksi. Untuk setiap stasiun kerja 1 untuk depan, waktu standar 248 detik, kapasitas produksi 116 pcs/hari, stasiun kerja 2 untuk belakang 291 detik, kapasitas produksi 98 pcs/hari, stasiun kerja 3 pasang kerah, waktu standar adalah 279 detik, kapasitasnya adalah 279 detik. produksi 102 pcs/hati, stasiun kerja 4 waktu baku rias 190 detik, kapasitas produksi 151 pcs/hari, stasiun kerja 5 pasang lengan, waktu standar 282 detik, kapasitas produksi 102 pcs/hari, dan di stasiun kerja 6 heming waktu standar adalah 224 detik, kapasitas produksi 128 pcs/hari. Berdasarkan hasil analisis menunjukkan bahwa waktu terbesar pada stasiun kerja 2 selama 291 detik dipengaruhi oleh penyisihan 15% dengan kapasitas produksi 98 pcs/hari, karena membutuhkan tingkat ketelitian yang besar. Sehingga dari perhitungan waktu baku, total produksi di 6 stasiun kerja penggergajian 669 pcs/hari belum dapat memenuhi target perusahaan dalam sebulan yang mencapai 20.000 potong sandang per bulan. Berdasarkan hasil analisis menunjukkan bahwa waktu terbesar pada stasiun kerja 2 selama 291 detik dipengaruhi oleh penyisihan 15% dengan kapasitas produksi 98 pcs/hari, karena membutuhkan tingkat ketelitian yang besar. Sehingga dari perhitungan waktu baku, total produksi di 6 stasiun kerja penggergajian 669 pcs/hari belum dapat memenuhi target perusahaan dalam sebulan yang mencapai 20.000 potong sandang per bulan. Berdasarkan hasil analisis menunjukkan bahwa waktu terbesar pada stasiun kerja 2 selama 291 detik dipengaruhi oleh penyisihan 15% dengan kapasitas produksi 98 pcs/hari, karena membutuhkan tingkat ketelitian yang besar. Sehingga dari perhitungan waktu baku, total produksi di 6 stasiun kerja penggergajian 669 pcs/hari belum dapat memenuhi target perusahaan dalam sebulan yang mencapai 20.000 potong sandang per bulan
PENINGKATAN KETERAMPILAN MAHASISWA MELALUI PENGOPERASIAN PROGRAM AUTOCAD Darsini, Darsini; Suprapto, Suprapto
Literasi Jurnal Pengabdian Masyarakat dan Inovasi Vol 1 No 1 (2021)
Publisher : Pengelola Jurnal Politeknik Negeri Ketapang Jl. Rangga Sentap, Dalong Sukaharja, Ketapang 78813. Telp. (0534) 3030686 Kalimantan Barat

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58466/literasi.v1i1.1277

Abstract

Autocad is an application that supports image creation in the engineering design field. This application is able to design technical drawings, plans, buildings and other objects. The problem is, how can we skillfully utilize the facilities provided by Autocad, so that it can make a significant advantage compared to manual drawing. The objectives of the science and technology application program are (1) To provide knowledge and skills about image processing programs (2) To improve student skills in completing image tasks using the Autocad program. The method used in the science and technology application program is the provision of theory and hands-on practice as outlined in the training module. In addition, drawing exercises were also carried out during the activity. The evaluation of the science and technology application activity program about improving the skills of Univet students through the operation of the autocad program is that training in the operation of the autocad program can provide knowledge and skills in students in completing drawing tasks given by lecturers and changes in student competencies (knowledge and skills). in using the computer. This is evident from the average results of drawing exercises and the final grades carried out by the students participating in the training by 75%, previously students were still unfamiliar with operating the autocad program.
Pelatihan Pembuatan Sabun Mandi Eco Enzim Di Kelompok Ibu-Ibu Dawis Darsini, Darsini; Suprapto, Suprapto; Ahya, Rahmatul; Sri L, Mathilda
Literasi Jurnal Pengabdian Masyarakat dan Inovasi Vol 4 No 2 (2024)
Publisher : Pengelola Jurnal Politeknik Negeri Ketapang Jl. Rangga Sentap, Dalong Sukaharja, Ketapang 78813. Telp. (0534) 3030686 Kalimantan Barat

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58466/literasi.v4i2.1503

Abstract

The problem faced by mothers, especially Dawis Melati 2 RT 07 RW 03 Jombor Bendosari Sukoharjo, is the use of conventional bath soap which contains dangerous chemicals and is not environmentally friendly. The proposed solution is to provide training to groups of mothers in Dawis to make eco enzyme soap. Competitive Community Service in the Field of Science (PMKBI) aims to empower groups of mothers, especially housewives. The method used is in 2 stages, the first is an introduction to the benefits of eco-enzymes and an introduction to the ingredients used to make soap. The second stage is training in the process of making bath soap using environmentally friendly eco-enzyme ingredients. Apart from that, education was also provided about the dangers of chemicals in conventional soap. The number of participants who attended the training was 17 women. Before the training was carried out, a pre-test was given and an average score of 51.57% was obtained and the post-test score after the training was 83.53%, so there was an increase in knowledge of 32%, so knowledge mothers about eco-enzyme bath soap and how to make it can be understood and known well. Based on the calculation of the value of the rupiah, if calculated from 1 month's expenditure, an average of 4 pieces cost Rp. 25,000, the cost of making eco-enzum soap per production could be 8 pieces with a production cost of Rp. 50,000, so you can save Rp. 25,000,-. each month.
STUDI KORELASI LINGKAR PERUT DENGAN KADAR GULA DALAM DARAH Darsini, Darsini; Purwanto, Fajar
Pengembangan Ilmu dan Praktik Kesehatan Vol. 2 No. 3 (2023): Volume 2, Nomor 3, Juni 2023
Publisher : STIKES Dian Husada Mojokerto

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56586/pipk.v2i3.261

Abstract

Diabetes mellitus tipe 2 merupakan penyakit hiperglikemi akibat insensivitas sel terhadap insulin. Kadar insulin mungkin sedikit menurun atau berada dalam rentang normal. Karena insulin tetap dihasilkan oleh sel-sel beta pankreas, maka diabetes mellitus tipe 2 dianggap sebagai non insulin dependent diabetes. Salah satu faktor yang diidentifikasi sebagai pencetus diabetes mellitus tipe 2 adalah obesitas. Obesitas itu sendiri ditandai dengan peningkatan lingkar perut diatas batas normal. Tujuan penelitian ini adalah untuk mengetahui hubungan antara lingkar perut dengan kadar gula dalam darah. Penelitian ini termasuk penelitian observasional analitik dengan pendekatan cross sectional. Sampel dalam penelitian ini adalah sebagian masyarakat usia produktif di Dusun Gayaman Desa Gayaman Kecamatan Mojoanyar Kabupaten Mojokerto yang memenuhi kriteria penelitian sebanyak 158 responden yang dipilih menggunakan teknik simple random sampling. Instrument penelitian menggunakan kuesioner dan lembar observasi. Variabel independen dalam penelitian ini adalah lingkar perut dan variable dependen dalam penelitian ini adalah kadar gula dalam darah. Analisa data dilakukan menggunakan uji korelasi rank spearman rho. Dari hasil uji korelasi ranks spearman rho didapatkan nilai koefisien korelasi sebesar 0,405 dan nilai Sig (2-tailed) sebesar 0,000 < signifikansi α (0,05) maka dapat disimpulkan bahwa ada hubungan lingkar perut dengan kadar gula dalam darah pada masyarakat Dusun Gayaman Desa Gayaman Kecamatan Mojoanyar Kabupaten Mojokerto dengan kekuatan hubungan sebesar 0,045 (tingkat korelasi cukup). Pengendalian berat badan pada penderita diabetes mellitus akan membantu penderita diabetes mellitus dalam mengendalikan kadar gula dalam darah yang dimiliki serta menurunkan risiko kekambuhan akibat peningkatan kadar gula dalam darah yang tidak terkendali
TERAPI KOMPLEMENTER PENURUN KADAR GULA DALAM DARAH PADA PENDERITA DIABETES MELLITUS Pratama, Firmansyah Putra; Darsini, Darsini
Pengembangan Ilmu dan Praktik Kesehatan Vol. 2 No. 1 (2023): Volume 2, Nomor 1, Februari 2023
Publisher : STIKES Dian Husada Mojokerto

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56586/pipk.v2i1.280

Abstract

Penatalaksanaan diabetes mellitus yang terdiri dari pengaturan pola makan, melakukan aktivitas fisik secara teratur, dan menjaga berat badan merupakan cara untuk melakukan pengendalian kadar gula dalam darah pada penderita diabetes mellitus. Namun dalam faktanya, untuk melakukan tatalaksana tersebut, masih sering ditemukan pasien diabetes mellitus yang tidak mampu menerapkan secara teratur. Salah satu terapi komplementer untuk mengendalikan kadar gula dalam darah adalah dengan mengkonsumsi teh herbal daun salam dan jahe merah. Tujuan penelitian ini adalah untuk mengetahui pengaruh konsumsi teh herbal daun salam dan jahe merah terhadap perubahan kadar gula dalam darah pada pasien diabetes mellitus tipe 2. Jenis penelitian yang digunakan adalah quasy ekperimental. Sampel dalam penelitian ini adalah sebagian penderita diabetes mellitus tipe 2 sebanyak 51 responden. Dalam penelitian ini menggunakan probability sampling dengan jenis simple random sampling. Variabel independen dalam penelitian ini adalah konsumsi teh herbal daun salam dan jahe, sedangkan untuk variabel dependennya adalah kadar gula dalam darah. Terdapat pengaruh yang bermakna pemberian teh herbal daun salam dan jahe merah pada pasien diabetes mellitus tipe 2 terhadap perubahan kadar gula dalam darah dengan nilai Asymp Sig (2-tailed) sebesar 0,001 < α (0,05). Konsumsi teh herbal daun salam dan jahe merah merupakan salah satu jenis terapi komplementer yang dapat diaplikasikan pada penderita diabetes mellitus. Untuk mendapatkan hasil yang optimal dibutuhkan kesabaran serta kepatuhan dari pasien diabetes mellitus tipe 2 untuk mengkonsumsi teh herbal daun salam dan jahe merah setiap harinya. Disamping itu, pasien diabetes mellitus tipe 2 masih harus mematuhi setiap advice dari tenaga kesehatan
PERAWATAN MESIN SUCKER MULLER DI PT. DLH Darsini, Darsini; Prabowo, Bayu
Injection: Indonesian Journal of Vocational Mechanical Engineering Vol 1 No 1 (2021)
Publisher : Pengelola Jurnal Politeknik Negeri Ketapang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58466/injection.v1i1.1348

Abstract

PT. DLH Sukoharjo is a textile industry which is engaged in weaving. Observations were made on the Sucker Muller machine which often experienced jams on the cilynder drier, fan, beam stand and bearings and when the beam rotated it could not maximize production results. especially in the Weaving I section in the Sizing section. The problem that often occurs is the inefficient way of maintaining the sizing machine by the factory, which causes delays in the amount of production. In solving the problem, it is done by treating the muller sucker machine. The preventive maintenance method used for maintenance and repair as well as damage prevention. Based on the analysis, it was found that the Mean Time To Failure (M'I'I'F) of the Sucker Muller engine components was 6.63 hours and the Mean Time To Repair (MTTR) value was 573,531 hours. This can aid production and increase production of frequently damaged or faulty parts.
PERIODICAL MAINTENANCE SERVICE VOLVO TRUCK FMX 440 DI PT. MADHANI TALATAH NUSANTARA Darsini, Darsini; Hartanto, Tri
Injection: Indonesian Journal of Vocational Mechanical Engineering Vol 2 No 2 (2022)
Publisher : Pengelola Jurnal Politeknik Negeri Ketapang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58466/injection.v2i2.1483

Abstract

Periodical Service is engine care to reduce the frequency of damage and duration of the injury. Good and efficient care can keep the tool's operating times, keep it in production, reduce the cost of unexpected damage. The purposes are to: (1) Perform Periodical Service activities during the activity, (2) Find when Periodical Service consists of PS 250, PS 500, PS 1000 and PS 2000, (3) Know the results of Periodical Service. Implementation of the Periodical Service fulfilled at PT. Madhani, especially in Volvo trucks, includes changing engine oil, changing engine oil filters, changing transmission oil and filters, changing final drive oil to the battery and electrical checks. With the Periodical Service data program showing PA (Physical Avelaibelity) results of over 95%, MTBF (Mean Time Between Failures) of over 3000 hours, and MTTR (Mean Time To Repair) of less than 20 hours, this is very effective and efficient to increasing production.