Claim Missing Document
Check
Articles

MEMPELAJARI STRUKTUR DAN SIFAT NANO LOGAM TEMBAGA MENGGUNAKAN PROGRAM PM3 Mulyati Sukma; Theresia Sita Kusuma; Syukri Arief
Jurnal Riset Kimia Vol. 1 No. 2 (2008): March
Publisher : Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/jrk.v1i2.59

Abstract

  ABSTRACT A research to study the electronic and chemical characteristics of Copper which nano structure using PM3 program has been done. This program part of HyperChem pro 6.0 that performed by Pentium 4. This research has nano 2D and 3D structure (atom number 2-30). Results of computations showed that Copper can make nanosheets, nanorods and nanotubes structure that have the different electronic characteristics from its crystals structure. Fortunately, copper with nano structure could develop as insulator and semiconductor materials. Keywords : Copper, nano structure, nanosheets, nanorods, nanotubes.
PEMBUATAN DAN KARAKTERISASI NANOKOMPOSIT MFe2O4 DAN MFe2O4-SiO2 (M = Cu, Ni) Rahmayeni -; Syukri Arief; Yeni Stiadi; Herlin Oktavani
Jurnal Riset Kimia Vol. 4 No. 1 (2010): September
Publisher : Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/jrk.v4i1.84

Abstract

 Nanocomposites of MFe2O4 and MFe2O4-SiO2 (M= Cu, Ni) were prepared by complexation and complexs polymerization methods using citric acid as complexing agent, tetraethylorthosilicate (TEOS), metal (Cu, Ni) nitrate and iron chloride as precursors. FT-IR spectroscopy was used to analysis the complexation and polymerization process. The decomposition of material was investigated by TG-DTA. Microstructure characterization was carried out by XRD and SEM. Peaks in XRD pattern indicate that the nanocomposites products consist of copper iron oxide (CuFe2O4) and (NiFe2O4) crystals, copper iron oxide crystal distributed in silica (CuFe2O4-SiO2) and nickel iron oxide crystal distributed in silica (NiFe2O4-SiO2). SEM images of CuFe2O4 and NiFe2O4 show that the composites have porous and spherical texture. The surface texture of CuFe2O4-SiO2 composite is triangel like and has porous but NiFe2O4-SiO2 is not regulated texture and has porous.  Keywords: MFe2O4, MFe2O4/SiO2, citric acid and complexs polymerization method   
DEGRADASI SENYAWA RHODAMIN B SECARA SONOLISIS DENGAN PENAMBAHAN TiO2 HASIL SINTESA MELALUI PROSES SOL-GEL Syukri Arief; Safni -; Putri Perdana Roza
Jurnal Riset Kimia Vol. 1 No. 1 (2007): September
Publisher : Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/jrk.v1i1.86

Abstract

 ABSTRACTDegradation of rhodamine B had been done by sonolysis method. Optimum temperature sonolysis were found of 41-50 oC. In this condition, rhodamine B 2 mg/L could be degradated around 64.04% during 6 hours sonolysis. Percentage degradation of rhodamine B enhanced by addition of TiO2 in solution. TiO2 was prepared with sol-gel process using titanium isopropoxide (TIP), isopropanol and dietanolamine (DEA) as precursor. It was heated on 500 oC and 700 oC in order to get TiO2-anatase dan TiO2-rutile. Rhodamine B 2 mg/L could be degradated around 68.48 and 90.00 % during 6 hours sonolysis on optimum temperature with addition of 0.1 g  TiO2-rutile and TiO2-anatase, respectively. Keyword: rhodamine B, sonolysis, sol-gel
PENGARUH LOGAM Li PADA ADSORPSI ATOM-ATOM H OLEH PERMUKAAN GRAFENA PLANAR Theresia Sita Kusuma; Emdeniz -; Syukri Arief
Jurnal Riset Kimia Vol. 1 No. 1 (2007): September
Publisher : Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/jrk.v1i1.91

Abstract

 ABSTRACT Graphene has future prospect for electronics. By adding some substituents this material can be tuned to behave like a metal or semiconductor. In this investigation, a planar single layer of modified graphene, C24H12-mLim (m = 0, 3, 6, and 12) consisted of seven six-member rings was used to adsorb the oncoming hydrogen (perpendicular to the surface, was defined as Had). A planar twolayer graphene C48H24 (7+7) was also included. To determine the adsorption models and the Had couverage, a semiempiris Calzaferri program, works on pentium 4 windows 98, was used to optimize nHad (n = 1, 2, and 3) that reached the surfaces. The heat of Had adsorption and the band gap of the surfaces were also computed. Results of these computations showed that: (1) the adsorption process was endothermic and Li reduced the heat of Had adsorption on the surfaces. (2) Li reduced the band gap of the surfaces, so C24H12 was a semiconductor but C24Li12 a conductor. (3) The adsorbed nHad always lowered the band gap of the surfaces, in exception of C24Li12 could be lower or higher. (4) Each atom on the surfaces, in exception hydrogen, might adsorb nHad formed tilted (with C) and lying down (with Li) surface complexes, and for C24H6Li6 an asymmetric twofold complex was also observed. (5) However, the Had couverage was low, some Had formed H2 and this was not observed on C24H6Li6. (6) The C48H24 kept an H2 molecule between layers. Thus, a new material C24H6Li6 which had two adsorption models, might increase the Had couverage, but had lower conductivity than that of C24H12. On the other hand, it is necessary to study in more details the hydrogen storage between graphene layers.        Key words: graphene, adsorption, substituent
PEMBUATAN LAPISAN TIPIS TiO2 -DOPED LOGAM M (M= Ni, Cu dan Zn) DENGAN METODA DIP-COATING DAN APLIKASI SIFAT KATALITIKNYA PADA PENJERNIHAN AIR RAWA GAMBUT Syukri Arief; Admin Alif; Nancy Willian
Jurnal Riset Kimia Vol. 2 No. 1 (2008): September
Publisher : Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/jrk.v2i1.111

Abstract

 ABSTRACT Preparation of TiO2-doped M (M = Ni, Zn and Cu) has been prepared on glass substrate using dip-coating technique. Titanium isopropoxide (TIP), Ni(OAct)2.4H2O, Zn(OAct)2.2H2O dan Cu(OAct)2 were used as starting materials and diethanolamine (DEA) as additive in isopropanol solution. Solutions were prepared by mixing of various concentration of metals (1, 3 and 5 mol %)  in 0.5 M TIP solution. Thin films were performed by immersion of glass substrate into solution by withdraw speed of 20 cm/min. Coated glass were dried at 100 – 110°C and heated at 500°C the process were repeated for several time. The product was characterized by XRD and showing TiO2 layer of anatase structure. EDX analysis has shown that thin films have found of Ti and doped-metal. Their crystallized sizes were calculated by Scherrer formula shown that it obtained in various in range of 12-21 nm. According to transformation effectively of titania doped M in peat swam water shown that catalytic activity 34.4 – 53.7% for the irradiation during 24 hours. Keywords : titania, thin films, photocatalytic properties
SINTESIS, KARAKTERISASI, DAN UJI AKTIFITAS FOTOKATALITIK NANOPARTIKEL MAGNETIK TiO2-CoFe2O4 Rahmayeni, -; Upita Septiani; Syukri Arief; Hayatul Hamdi
Jurnal Riset Kimia Vol. 4 No. 2 (2011): March
Publisher : Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/jrk.v4i2.134

Abstract

 ABSTRACT Magnetic nanoparticles of TiO2−CoFe2O4 were prepared using metal nitric and tiatniumisopropoxide as starting materials by coprecipitation and hydrolysis method. XRD, SEM, EDX and VSM were used to characterize the structure, morphology, composition and magnetic property of the particles, respectively. XRD pattern show the diffraction peaks of TiO2 anatase at 2θ = 25.3° and CoFe2O4 at 2θ = 35.5° in TiO2−CoFe2O4 particles. SEM image show the regular morphology and size distribution of particles. From VSM analysis indicate that the particles have paramagnetic properties. Photocatalytic activities of particles were applied for degradation of rhodamin B  and the results showed that CoFe2O4 doped into TiO2 can increase the activities of particles in visible light until 82 %. Key words : nanopartikel magnetik, TiO2−CoFe2O4, fotokatalis    
EFEK DOPANT TERHADAP STRUKTUR DAN KARAKTER DARI FOTOKATALIS POWDER TITANIA Yetria Rilda; Abdi Dharma; Syukri arief; Admin Alif
Jurnal Riset Kimia Vol. 2 No. 1 (2008): September
Publisher : Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/jrk.v2i1.145

Abstract

 ABSTRACT The structure and characterization of the titania (M-TiO2) can be modified by metal doped and calcinations temperatures variation by sol-gel method. Characterization of gel and M-TiO2 powder realized by FT-IR, TGA, XRD, Photo Optic and SEM. Titania has two crystal structures such as anatase and rutile. Anatase structures shown higher photocatalytic properties than rutile. The crystal structure was characterized to JCPS reference no. 21-1272, 2Ө : 25.3° identically as anatase structure and 2Ө : 27.3° as rutile. Structure modification is depend on calcinations temperature change. At 400°C the anatase structure was formed. The anatase intensity was increased at 500°C and at 600°C anatase transportation to rutile was found and anatase mixture was obtained. Several types of dopant can inhibit anatase to rutil transformation process at temperature ≥ 600°C. Park et al.,[1] reported that calcinations temperature and valence ion dopant influence the crystal size. Based on Scherrer’s equation the crystal size can be calculated by using the XRD  data. The crystal size of maximum intensity which was identified as anatase structure at 500°C as following Fe-TiO2 10.6 nm, MoTiO2 16.8 nm.  M-TiO2 character through inhibition of E. Coli bacteria growth was great infulenced by particle size and dopant ion type. This character shown by MIC value (Minimal Inhibition Concentration)) of each Fe, Mo-TiO2 between 0.35 – 0.45%. Keywords : crystal structure, characterization, titania, sol-gel
SINTESIS DAN KARAKTERISASI PARTIKEL NANOSPERIK TIO2 MELALUI METODE HIDROTERMAL GELOMBANG MIKRO Amelia Amir; Emriadi -; Syukri Arief; Kazuhiro Manseki; Takashi Sugiura
Jurnal Riset Kimia Vol. 7 No. 2 (2014): March
Publisher : Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/jrk.v7i2.166

Abstract

 ABSTRACTSimple synthesis of nanospherical TiO2 by microwave hydrothermal method has beeninvestigated. Titanium tetra isopropoxide (TTIP) and tetra methyl ammonium hydroxide(TMAOH) were used as precursor. The crystal phase and microstructure were characterized byX-Ray Diffraction (XRD) and transmission electron microscopy (TEM) including selected areadiffraction (SAED). The presence of intense peak in the XRD patterns confirmed to anatase andin good agreement with SAED patterns. Nanospherical of particles were clearly seen in theTEM image and the size of particles was approximately 4-5 nm.Keywords : microwave hydrothermal, colloidal titanates, structure directing agent,nanospherical TiO2
DIP-COATING SENYAWA KALSIUM FOSFAT DARI BATU KAPUR BUKIT TUI MELALUI METODE SOL-GEL Novesar Jamarun; Lia Anggresani; Syukri Arief
Jurnal Riset Kimia Vol. 5 No. 1 (2011): September
Publisher : Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/jrk.v5i1.179

Abstract

 ABSTRACT Preparation of Dip-Coating Calcium Phosphate via sol-gel method using natural limestone Bukit Tui as calcium precursors and diammonium hydrogen phosphate as phosphorus precursors with sol-gel process has been investigated. Ethanol was used as solvent and DEA (diethanolamine) was used stabilizing agent. The powder were prepared by calcinated the sol at 950 oC. The products were characterized by Fourier Transform Infra Red, X-Ray Diffraction and Scanning Electron Microscopy. FTIR results showed that the vibration form was PO43-, P2O74-, O-H and CO2. XRD patterns of powder with various Ca/P mol ratio showed that the product of calcium phosphate was Ca2P2O7 and also found the hydroxyapatite Ca10(PO4)6(OH)2 in Ca/P mol ratio 1,7. SEM images of powder calcium phosphate revealed that their morphology were spheric and homogen. The coating process was done at glass substrate with coating speed 20 cm/min by calcinations at 400 oC. XRD patterns of thin layer showed that the product was Ca2P2O7 and SEM images of thin layer revealed that their morphology were bulk. Keywords: Natural limestone, calcium phosphate, hydroxyapatite, sol-gel, dip-coating
PEMBUATAN PASTA DAN PEMBENTUKAN LAPISAN TIPIS HIDROKSI APATIT KARBONAT Selfa Dewati Samah; Syukri Arief; Novesar Jamarun
Jurnal Riset Kimia Vol. 7 No. 2 (2014): March
Publisher : Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/jrk.v7i2.180

Abstract

 ABSTRACTPaste of Carbonated Hydroxyapatite (CHA) as a biocompatible material that can be used in thebone and teeth repair has been developed on preparation of thick film. CHA paste was preparedby mixing precipitate of CHA with CaSO4 and polyethylene glycol (PEG) in 2-propanol assolvent. Paste was deposited on substrate to get thick films by screen printing method. X raydiffraction (XRD) analysis has shown hexagonal crystal structure and crystal size of CHAacquired 7,2 nm by Scherrer’s method. Fourier Transform Infrared (FTIR) analysis has shownabsorption spectra which indicating phosphate, carbonate, and hydroxide group. Size of thiscomposite particles analyzed by PSA (particle size analyzer) about 3μm and pore size was 0.44-0.49 nm obtained from BET analysis, increased with the addition of CaSO4 (0.44 to 0,49 nm).Rephrase PEG was found as an adhesive and homogenize paste on substrat surface. In addition,CHA paste also potentially can be used as bone cement.Keywords : Paste, thick film, carbonated hydroxyapatite
Co-Authors -, Emdeniz -, Rahmayeni -, Rianda -, Yulfitrin . Darwison . Syukri Abdi Dharma Abral, Hairul Ade saputra Ade Saputra Adlis Santoni Admi Admin Alief Admin Alif Admin Alif Admin Alif Admin Alif Admin Alif Ahmad Hafizullah Ritonga Aju Deska Alif, Admin Alif, Admin Alif, Admin Amelia Amir Anggresani, Lia Anwar Kasim Ariadi Hazmi Aritonang, Barita Astuti Astuti Aulia Arivin Billah Aulia Aulia Baharuddin Shaleh Boy Isfa Boy isfa Budi Hermawan BUSTANUL ARIFIN Denny Akbar Tanjung Denny Akbar Tanjung Desfitri, Erda Rahmilaila Deswati Deswati Devi Pebrina Eka Putra Waldi Ellyta Sari Emdeniz - Emriadi - Erda Rahmilaila Desfitri Evi Adhelina Fatiha, Widya Yuliani Fitri, Ernarisa Hamdi, Hayatul Hary Sanjaya Hayatul Hamdi Herlin Oktavani Hermansyah Aziz Hermawan, Budi ihda khaira Kazuhiro Manseki Khoirul Amru Kusuma, Theresia Sita Lestari Ningsih Lia Anggresani Lisa Utami Lisa Utami Lusi Puspitasari M. H. Ahmad Mahardika, Melbi Mai Efdi Mai Efdi Maria Erna Maria Erna Maria Erna Kustyawati Matlal Fajri Alif Melbi Mahardika Mirzah Mirzah Mochamad Asrofi Mohd Hafizi Ahmad Mohd Jain Noordin Muhammad Rizki Mulyati Sukma Naldi, Nofri Nancy Willian Nengsih, Zarnida Widia Neswati Neswati Nofri Naldi Novesar Jamarun Novesar Jamarun Novizar Nazir Oktavani, Herlin Olly Norita Tetra Putri Perdana Roza Radiatun Mardiah Rahadian Zainul Rahayu Rahayu Reni Desmiarti Reni Desmiarti Restina Bemis Restina Bemis, Restina Rianda - Rianda Rizal Rini Ramadhani Risma Sari Rosadi, Maulana Yusup Roza, Putri Perdana Rudy Fernandez Safni Safni Selfa Dewati Samah Sestry Misfadhila Shaleh, Baharuddin Sry Wahyuni Suarnikan Hulu Suci Auliya Rahmi Elsya Sumaryati Syukur Suryati Suryati Syukri Syukri Syukri Takashi Sugiura Theresia Sita Kusuma Upita Septiani Upita Septiani Usna, Sri Rahayu Alfitri Widya Yuliani Fatiha Yeni Stiadi Yessi Rahmayani Yestria Rilda Yetria Rilda Yetti Marlida Yulfitrin - Yulidar Laila Safitri Yulizar Yusuf Yurniwati Yurniwati Zilfa Zilfa Zulhadjri Zulhadjri