Claim Missing Document
Check
Articles

Found 33 Documents
Search

Edukasi Instalasi Listrik Dan PLTS Bagi Pemuda Pemuda Putus Sekolah Untuk Meningkatkan Keterampilan Bekerja Di Desa Padang Sakti Meliala, Selamat; Amani, Yasir; Ari Saptari, Mochamad; Muhammad, Muhammad; Muhammad Jalil, Saifuddin
Jurnal SOLMA Vol. 14 No. 1 (2025)
Publisher : Universitas Muhammadiyah Prof. DR. Hamka (UHAMKA Press)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22236/solma.v14i1.17889

Abstract

Latar Belakang: Dengan pertumbuhan pendudukan semakin cepat dan pendidikan yang tidak memadai dan tidak terarah bagi masyarakat sehingga masyarakat tidak dapat menguasai kemajuan teknologi energi terbarukan dalam hal pemanfaatan Dari tinjauan ke lapangan terlihat masyarakat masih ada terdapat pemuda putus sekolah sehingga ini menyebabkan terganggu kehidupan sosial di desa yang tidak harmonis antara pembangunan sumber daya manusia. Manfaat kegiatan untuk memberikan  pengalamam kerja pada instalasi listrik dan PLTS sehingga dapat digunakan untuk mencari kerja dalam pemasangan instalasi listrik dan PLTS. Metode: Pendekatan pengabdian ini memberi edukasi dan pelatihan   kepada pemuda putus sekolah sehingga mareka mempunyai keterampilan di bidang listrik dan mampu memasang instalasi listrik dan PLTS pada rumah tangga ataupun pada gedung – gedung yang besar. Keterampilan instalasi listrik ini sangat banyak dibutuhkan pada transisi energi tak teerbarukan ke energi terbarukan khususnya pemasangan instalasi panel surya. Hasil: Setelah dilakukan presentasi edukasi panel surya, tim pengabdi juga memberi kuisioner yang berkaitan dengan Edukasi Instalasi Listrik Dan pembangkit listrik panel surya bagi Pemuda Pemuda Putus Sekolah. Plot kurva dari hasil jawaban sejumlah 20 pertanyaan kuisioner yang merupakan sistem penilaian terhadap perbandingan  jawaban yang benar dan salah sebelum serta sesudah mengikuti Edukasi dari pertanyaan setelah mengikuti edukasi dan pelatihan instalasi listrik dan PLTS pada pemuda putus sekolah yang berjumlah 20 peserta. Dari kurva batangan terlihat skor pemahaman peserta sebelum dan  sesudah mengikuti edukasi dan pratikal dengan jawaban benar 212. Kesimpulan: Masyarakat terutama pemuda sudah paham cara instalasi rumah tangga  dan instalasi PLTS dan pengambungan ke listrik PLN.
Development of E-Modules on Problem-Based Learning to Enhance Students Science Literacy Asnidar, Asnidar; Safriana, Safriana; Jalil, Saifuddin Muhammad; Sakdiah, Halimatus; Zahara, Syarifah Rita
Asian Journal of Science Education Vol 6, No 1: April, 2024
Publisher : Universitas Syiah Kuala

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24815/ajse.v6i1.35887

Abstract

Interactive electronic modules are teaching materials used in the learning process with the help of today's technology which is useful for forming a more creative learning process. This development research method refers to Research and Development (RD) with the ADDIE model. The research subjects were 11th-grade Science 4, totalling 31 students and the research objects were located at Kejuruan Muda Public High School 1. Data collection instruments in the form of pretest and post-test and an interest questionnaire regarding the e-module. Data analysis is qualitative data analysis and quantitative data analysis. The results obtained are from material experts in the "Decent" category, while validation results from media experts are in the "Decent" category. the results of the teacher's response in the "Very Interesting" category and the results of the student's response in the "Very Interesting" category. The N-gain test carried out in 11th-grade Science 4 obtained a result of 0.70 with a percentage of 70% falling into the "High" category. The results of this research indicate that the development of an interactive electronic module based on problem-based learning on material elasticity of materials and Hooke's law is suitable for use and can increase students' scientific literacy.
Small-Scale Wind Power Generator with Inverse Taper and Taper Type Blades at Low Wind Speed Lubis, Rakhmad Syafutra; Muhayatsyah, Teuku; Syukri, Mahdi; Siregar, Ramdhan Halid; Jalil, Saifuddin Muhammad
Journal of Engineering and Science Vol. 4 No. 1 (2025): June
Publisher : Yayasan Kawanad

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56347/jes.v4i1.275

Abstract

The utilization of wind energy as one of the renewable energy sources in Indonesia is still limited. This is due to Indonesia's large wind potential, but it is at low speeds. One modification of wind turbines to overcome this problem is by using inverse taper and taper blades. Inverse taper blades have a chord distribution that increases from root to tip while taper blades have a chord distribution that decreases from root to tip. This research conducts the design and construction of inverse taper and taper blades on small-scale wind turbines using NACA 6412 airfoil type, then tested in the field and obtained the performance of each blade. The design was carried out using blade element momentum theory to obtain the blade geometry shape and perform performance analysis of each type of blade. Based on the simulation results obtained from QBlade, it shows that the inverse taper blade performance has a maximum Cp of 0.52 while the taper blade has a maximum Cp of 0.41. The power graph from field testing results shows that inverse taper blades provide good power generation at low wind speeds compared to taper blades. The inverse taper blade has a cut-in speed of 1.2 m/s and the best power production occurs at speeds of 1-4 m/s.
SISTEM MONITORING DAN KONTROL PINTU BENDUNGAN BERBASIS NODEMCU DAN ENERGI TERBARUKAN Rifai, Abas; Sembiring, Arnes; Br Sitepu, Kristina Annatasia; Jalil, Saifuddin Muhammad
Jurnal TIMES Vol 14 No 1 (2025): Jurnal TIMES
Publisher : STMIK TIME

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Pintu bendungan memiliki peran strategis dalam pengelolaan sumber daya air, mencakup irigasi, pengendalian banjir, hingga penyediaan air bersih bagi masyarakat. Namun, di banyak daerah, sistem pengoperasian pintu masih bersifat manual dan sangat tergantung pada intervensi manusia. Ketergantungan ini menyebabkan keterlambatan dalam merespons fluktuasi volume air secara tiba-tiba, terutama pada saat cuaca ekstrem, yang berisiko menimbulkan bencana seperti banjir dan kekeringan. Penelitian ini bertujuan untuk merancang dan mengembangkan sistem otomatisasi pintu bendungan berbasis Internet of Things (IoT), dengan menggunakan mikrokontroler NodeMCU ESP8266 sebagai unit kendali utama. Sensor ultrasonik digunakan untuk mengukur ketinggian permukaan air secara real-time, sementara sensor hujan memantau kondisi cuaca. Sistem ini dilengkapi panel surya sebagai sumber energi terbarukan guna mendukung keberlanjutan operasional. Motor servo digunakan untuk membuka dan menutup pintu bendungan secara otomatis berdasarkan data sensor yang dianalisis secara cerdas. Seluruh data dikirimkan ke aplikasi Blynk, memungkinkan pemantauan dan pengendalian jarak jauh melalui perangkat seluler. Hasil pengujian menunjukkan bahwa sistem ini bekerja secara akurat, responsif, dan andal dalam berbagai kondisi simulasi. Temuan ini menawarkan solusi teknologi yang inovatif, hemat energi, dan berpotensi diterapkan secara luas dalam sistem pengelolaan air terpadu di masa depan.
Fatigue Analysis on Hybrid Sugar Palm-Kenaf Fibre Reinforced Polypropylene Composites Bachtiar, Dandi; Siregar, Januar Parlaungan; Zulfadhli; Masri; Arhami; Siregar, Ramdhan Halid; Jalil, Saifuddin Muhammad
Journal of Engineering and Science Vol. 3 No. 1 (2024): January-June 2024
Publisher : Yayasan Kawanad

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56347/jes.v3i1.209

Abstract

ABSTRACT Hybrid natural-natural fibre reinforced polymer composites become attractive alternative to seek the friendly-environmentally materials. Study on the durability level of the hybrid composites have the importance reason due to the role in application as structural function. This study focuses on examining the fatigue strength of polypropylene polymer composites reinforced with hybrid sugar palm-kenaf fibres. The hybrid composite materials were prepared by mixing the fibres and matrix with several compositions. There are five composition types of specimens that evaluated, such as 70:10:10, 70:15:15, 70:20:10, 80:10:10 and 90:5:5. The hybrid composites were composed by PP, sugar palm fibre and kenaf fibre. Furtheremore the tensile test were conducted to find the value of ultimate tensile strength for every specimens of hybrid composites. The fatigue test also were conducted with four level of stress i.e. 80%, 70%, 60% and 50%. The results show that in the lower level of stress, the hybrid composites with higher content of sugar palm fibre posses the better performance of fatigue life compare to the others
Pemberdayaan Pembangkit Listrik Mikro Tenaga Surya dan Sosialisasi Resiko Pencurian Arus PLN di Desa Blang Pulo Jalil, Saifuddin Muhammad; Sofyan, Diana Khairani; Amri, A; Gani, Subhan A; Syukriah
Kawanad : Jurnal Pengabdian kepada Masyarakat Vol. 1 No. 2 (2022): October
Publisher : Yayasan Kawanad

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56347/kjpkm.v1i2.66

Abstract

At this time, electricity has become a primary need for the community, the existence of the State Electricity Company (PLN) is very supportive of all community activities. The high use of electricity can cause negative effects for users, where the higher the use of electricity, the greater the costs incurred. This is what triggers the emergence of things that are not wanted in society. One of them is the emergence of a desire to steal electric current. In general, people do not know what the risks are due to stealing the electric current. In addition, there are other ways to reduce excessive use of electricity, one of which is by assembling a solar micro-power plant, of which not many people know about the use of assembling the power plant. Based on this, service is carried out with the aim of providing explanations and adding knowledge to the community in the safe use of electrical energy; provide explanations and increase knowledge for the public about the risk of theft of electrical energy; increase community participation in using and protecting the environment by using alternative energy; foster a strong bond between the Blang Pulo gampong which is the closest village to the Malikussaleh University Bukit Indah campus and the Malikussaleh University academic community, especially the electric energy-saving extension team. The counseling activity on the risk of theft of PLN flows in the village of Blang Pulo is carried out in the following activity methods: Program introduction, assembly and delivery of various forms of energy, especially solar energy; The submission of a frugal living attitude according to Islamic law is accompanied by showing several verses of the Koran and hadith and conveying the risks due to stealing electric current. The expected results of this service are through the micro-solar electricity empowerment program and energy-saving counseling, It is hoped that the awareness, sensitivity and participation of lecturers and the community of Blang Pulo will grow and develop in the safe and efficient use of electrical energy so that there is an adequate supply of electricity and there will be no longer rotating blackouts caused by the limited supply of electricity from the PLN, and explain the consequences if electrical energy is stolen for personal or group use in order to be able to use electrical energy for free.
Program Pelatihan Pemasangan Instalasi Listrik Gedung dan Daya bagi Pemuda Kopelma Darussalam Lubis, Rakhmad Syafutra; Siregar, Ramdhan Halid; Walidainy, Hubbul; Syukri, Mahdi; Jalil, Saifuddin Muhammad
Kawanad : Jurnal Pengabdian kepada Masyarakat Vol. 3 No. 2 (2024): October
Publisher : Yayasan Kawanad

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56347/kjpkm.v3i2.225

Abstract

The Training Program on Building Electrical and Power Installation for Kopelma Darussalam Youth is designed to enhance the technical skills of the younger generation in the electrical field. This program aims to equip participants with both theoretical knowledge and practical experience related to the installation of electrical systems in buildings, including lighting systems and power distribution networks. The training covers topics such as the introduction to electrical components, installation planning, installation techniques, safety standards, and troubleshooting electrical systems.The primary target of this program is local youth with potential to develop technical competence in the electrical sector, enabling them to compete in the workforce or establish independent businesses. By employing a project-based approach, participants are expected to apply their skills professionally and in compliance with industry standards. Furthermore, this program contributes to empowering youth as valuable community assets to support sustainable local development.
Small-Scale Wind Power Generator with Inverse Taper and Taper Type Blades at Low Wind Speed Lubis, Rakhmad Syafutra; Muhayatsyah, Teuku; Syukri, Mahdi; Siregar, Ramdhan Halid; Jalil, Saifuddin Muhammad
Journal of Engineering and Science Vol. 4 No. 1 (2025): June
Publisher : Yayasan Kawanad

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56347/jes.v4i1.275

Abstract

The utilization of wind energy as one of the renewable energy sources in Indonesia is still limited. This is due to Indonesia's large wind potential, but it is at low speeds. One modification of wind turbines to overcome this problem is by using inverse taper and taper blades. Inverse taper blades have a chord distribution that increases from root to tip while taper blades have a chord distribution that decreases from root to tip. This research conducts the design and construction of inverse taper and taper blades on small-scale wind turbines using NACA 6412 airfoil type, then tested in the field and obtained the performance of each blade. The design was carried out using blade element momentum theory to obtain the blade geometry shape and perform performance analysis of each type of blade. Based on the simulation results obtained from QBlade, it shows that the inverse taper blade performance has a maximum Cp of 0.52 while the taper blade has a maximum Cp of 0.41. The power graph from field testing results shows that inverse taper blades provide good power generation at low wind speeds compared to taper blades. The inverse taper blade has a cut-in speed of 1.2 m/s and the best power production occurs at speeds of 1-4 m/s.
Edukasi Penerapan Sistem ATS Antara PLN dan PLTS di SMA Negeri 2 Kesuma Bangsa Meliala, Selamat; Akmal, Syarifah; Amani, Yasir; Putri, Raihan; Muhammad Jalil, Saifuddin
Jurnal SOLMA Vol. 12 No. 3 (2023)
Publisher : Universitas Muhammadiyah Prof. DR. Hamka (UHAMKA Press)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22236/solma.v12i3.13126

Abstract

Background: Background: Electricity sources originating from PLN often cause sudden power outages that we don't know about, so this is very dangerous for sensitive electronic devices such as computers. To provide knowledge of automatic switch technology for quick transfers in selecting one source that is on quickly so that there is no momentary power outage on the computer load. Method: SMA Negeri 2 Kesuma Bangsa, the number of participants was 30 students, providing direction or education to participants in the form of ATS technology and providing insight into the use and design of ATS technology. As well as providing questionnaires before and after education on ATS implementation and scoring scores regarding understanding of the technology. Results: The student community was very enthusiastic about participating in the event and they understood the implementation of ATS between PLN and PLTS. Conclusion: Rooftop solar panels are used to increase additional power by 8 pieces with a capacity of 200 WP per piece and in the computer laboratory at SMAN 2 Kesuma Bangsa they can be used because the flashing is very small so there will be no momentary shutdown which will cause data loss.
Dehydration of Moringa leaves using microcontroller and IoT controlled electrical dryer Jalil, Saifuddin Muhammad; Dabet, Abubakar; Akmal, Syarifah; Meliala, Selamat; Muhammad, Muhammad
International Journal of Power Electronics and Drive Systems (IJPEDS) Vol 16, No 4: December 2025
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijpeds.v16.i4.pp2688-2698

Abstract

The dehydration of Moringa Oleifera leaves is crucial to preserving their high nutritional value and extending shelf life for use in food and pharmaceutical applications. Traditional drying methods often result in nutrient degradation and lack precise environmental control. This study presents the design and implementation of an internet of things (IoT)- enabled electrical dryer system controlled by a microcontroller for the efficient dehydration of Moringa leaves. The system integrates temperature and humidity sensors, an Arduino Mega microcontroller, and a web-based interface for real-time monitoring and control. The electrical dryer maintains optimal drying conditions, significantly reducing moisture content while preserving essential nutrients. Data is logged and visualized through IoT connectivity, allowing for remote access and performance analysis. The dehydration of Moringa leaves requires approximately one kg of electricity for batteries in dual-energy dryers, which are based on microcontrollers and the IoT. The results demonstrate that the proposed system offers a reliable, energy-efficient, and scalable solution for the controlled dehydration of Moringa leaves, with potential applications in smart agriculture and postharvest processing. The excellent drying time is achieved in a greenhouse dryer, which maintains a temperature of 45 °C within the drying chamber, resulting in a median drying time of 6 hours. The standard moisture percentage of clean and dry Moringa leaves is measured at 18.5% (wb) and 8% (wb), respectively.