Claim Missing Document
Check
Articles

Found 26 Documents
Search

ANALISA PEMAKAIAN ALAT BERAT EXCAVATOR DENGAN STRAIGHT LINE DAN REDUCING CHARGE METHOD Tripoli, Bambang; Febrianti, Dian
Jurnal Teknik Sipil dan Teknologi Konstruksi Vol 4, No 2 (2018): Jurnal Teknik Sipil Dan Teknologi Konstruksi
Publisher : Universitas Teuku Umar

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35308/jts-utu.v4i2.1287

Abstract

PT. Gramita Eka Saroja, which is engaged in providing construction services in Meulaboh, West Aceh Regency, has heavy equipment that requires initial investment and a significant operating cost. Technically the existing equipment can still be operated and be able to produce, but it is economically unprofitable. In the case of the issues raised by this study, it is closely related to the estimated cost of owning an excavator heavy equipment so that the company can overcome the problems related to the use of the tool by determining the depreciation and economic value of the tool.. Based on the explanation, the problem and the objective of this research are how much the cost of owning costs must be calculated as long as the equipment is operated from new (purchase) in 2007 to 2018 with the economic life of the excavator heavy equipment is 11 years of use, if it is considered depreciating based on the straight-line method and the depreciation method decreases every year. Based on the calculation of depreciation per year by the straight-line method of Rp. 38,636,364 per year, with working hours Rp. 100,000 per hour / year. In the method of a balanced reduction in depreciation in 2007 Rp. 100,413,223 and in 2018 amounting to Rp. 20,059,008, while the total value of the year produced Rp. 95,764,463 with a 2007 book value of Rp. 187,471,826 and in 2018 amounting to Rp. 8,705,860 with a book value (residual value per year) Rp. 100,413,223. Bank, insurance and tax interest rates are Rp. 18,953 per hour.?
Analisis Kadar Sakarin pada Minuman Ringan Jenis Limun Febrianti, Dian
International Journal of Applied Chemistry Research Vol 3, No 1 (2021)
Publisher : Universitas Pendidikan Ganesha

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.23887/ijacr.v3i1.43130

Abstract

Penelitian ini adalah penelitian deskriptif yang bertujuan (1) mengetahui apakah minuman ringan jenis limun yang diuji di Laboratorium Pangan dan Bahan Berbahaya BBPOM Denpasar ada yang mengandung sakarin, (2) mengetahui kadar sakarin yang terkandung dalam minuman ringan jenis limun, dan (3) mengetahui apakah kadar sakarin tersebut memenuhi persyaratan yang ditetapkan Keputusan Kepala Badan POM RI No. HK. 00.05.5.1.4547 tentang Persyaratan Penggunaan Bahan Tambahan Pangan Pemanis Buatan dalam Produk Pangan, yang menetapkan bahwa minuman ringan memiliki batas maksimum penggunaan 500 mg/kg. Subjek penelitian ini adalah minuman ringan jenis limun dengan berbagai rasa. Objek penelitian ini adalah kadar sakarin dalam minuman. Penetapan kadar sakarin dilakukan dengan metode High Performance Liquid Chromatography (HPLC). Penelitian pada 5 sampel minuman ringan jenis limun yang diuji di Laboratorium Pengujian Pangan dan Bahan Berbahaya BBPOM Denpasar, 4 diantaranya mengandung zat aditif yaitu pemanis sakarin dengan kadar yang bervariasi antara 229,51 ppm – 2484,03 ppm. Jika kadar tersebut dibandingkan dengan batas maksimum yang ditetapkan, maka kadar sakarin pada sampel minuman limun yang diuji, salah satunya ada yang melebihi ambang batas penggunaan sakarin, sehingga dikatakan tidak memenuhi syarat.
REVIEW OF FUNDING PROCEDURES ON PT FIFGROUP CILEGON BRANCH Fitroh, Laila; Arisa, Lisa; Febrianti, Dian; Ekkiwinatha, Novan
Review of Accounting and Taxation Vol. 3 No. 1 (2024): June 2024
Publisher : Review of Accounting and Taxation

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.61659/reaction.v3i1.167

Abstract

Purpose - This research aims to describe the procedures for granting credit to Fifgroup companies in Cilegon Design/methodology/approach - Financing credit sales of Honda motorcycles to PT. FIFGROUP uses a system and credit financing procedures. The purpose of this study is (1) to analyze the effectiveness of procedures for providing credit funds to customers at PT. FIFGROUP Cilegon Branch (2) To analyze the customer's bad credit control system PT. FIFGROUP Celeron Branch Finding - Observations were made on the results of this study shows In analyzing the feasibility of granting credit to consumers, besides using 5C analysis the company also uses five parameters feasibility in analyzing whether or not the prospective debtor is financed credit, this proves that the company has carried out the process credit approval in accordance with procedures established by the company. Appropriate division of tasks and segregation of functions is control internal company which is one way to minimize risk uncollectible accounts receivable.
Upaya Meningkatkan Kreativitas Belajar Siswa Kelas XI TBSM di SMK Negeri 4 Kerinci pada Mata Pelajaran PPKN Melalui Penerapan Model Pembelajaran Inquiry Febrianti, Dian; Salam, M.; Usmanto, Heri
Civic Education Perspective Journal Vol 2 No 1 (2022): Civic Education Perspective Journal
Publisher : Citizenship Education, Faculty of Education, Jambi University

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (549.211 KB) | DOI: 10.22437/cepj.v1i1.15905

Abstract

This iresearch was motivated by the low learning creativity of class XI TBSM students at SMK Negeri 4 Kerinci which was obtained by 16.90% who were creative in learning. Then the learning model used by the teacher when learning takes place does not have a tendency to improve students' creative thinking skills, students tend to be monotonous, students' knowledge is only limited to what is obtained from the teacher, students have difficulty in developing the knowledge gained from learning and students do not dare to express ideas, ideas or opinions. The purpose of this study is to find out that the inquiry learning model can ncrease the learning creativity of class XI TBSM students on Civics subjects at SMK Negeri 4 Kerinci. The design of this research is action research conducted by the teacher in the classroom. This research procedure is designed for 3 ciycles, where each cycle is carried out in 3 (three) face-to-face meetings. The action design in each cycle in this classroom action research is divided into 4 (four) stages, namel. Based on the results obtained during the implementation of classroom action research, it can be explained that the results of increasing student learning creativity in cycle I in this study showed the average percentage value of student learning creativity was 50%. Then classroom action research was carried out in cycle II where the average value of the percentage of student learning creativity became 64% which means it has increased but has not reached the KKM. Next, classroom action research is carried out in cycle III where the average value of the percentage of student learning creativity increases to 75% . This figure has shown that the average percentage value of student learning creativity has reached the KKM criteria of 75. Then it can be concluded that the application of the inquiry learning model at SMK Negeri 4 Kerinci can increase the learning creativity of class XI TBSM students in Civics.
IDENTIFIKASI JENIS DAN FAKTOR PENYEBAB KERUSAKAN RIGID BETON PADA BAHU JALAN (STUDI KASUS RUAS JALAN BEUTONG-BEUTONG ATEUH KAB. NAGAN RAYA) maulana, akbar; Satria, Andrisman; Febrianti, Dian
Journal of The Civil Engineering Student Vol 4, No 1 (2022): Volume 4 Nomor 1 April 2022
Publisher : Jurusan Teknik Sipil, Fakultas Teknik, Universitas Syiah Kuala

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24815/journalces.v4i1.18904

Abstract

The Beutong-Beutong Ateuh causeway is a path made for the human activity of objects and employment. so that existing transportation activities are greatly influenced by the state of the pavement or road. Moreover, the road is a road that passes through the mountains, of course the most important thing to note is the feasibility of the road for road users. but the shoulder of the road is also no less important for road users, especially on mountain roads. in addition to being a place for vehicles that stop in an emergency, the shoulder of the road also provides side resistance for pavement and also as surface drainage. The purpose of this study is to find out the types of damage and factors that affect damage to the shoulder of the road made of rigid concrete. The method used is direct research of spaciousness, namely the results of a survey of rigid concrete damage on the shoulder of the Beutong-Beutong Ateuh road.Based on the results of research, the type of rigid concrete damage is a diagonal crack( diagonal crack ), winding crack, transverse crack, scalling, break corners, cross cracks or broken plates.
Efektivitas Metode Earned Value dalam Proyek Pengaman Pantai Farizal, Teuku; Jovanka Akhuya, ratu ratu; Febrianti, Dian
JTERA (Jurnal Teknologi Rekayasa) Vol 9, No 2: December 2024
Publisher : Politeknik Sukabumi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31544/jtera.v9.i2.2024.145-158

Abstract

Coastal erosion threatens coastal areas, making coastal protection projects crucial. This study evaluates the performance of a coastal protection infrastructure development project in Kampung Pasir Village, West Aceh, which faces the challenges of a dynamic marine environment and the demands of timeliness and budget adherence. The Earned Value method, with analysis of BCWS, BCWP, SV, SPI, and TE, is used to measure project performance. The results show an 11-week delay at the beginning (negative SV), but the project managed to surpass the schedule with an SPI value reaching 1.35 in the 12th week, indicating a 35% progress acceleration and an estimated faster completion. This acceleration is supported by the focus of activities on the material fabrication stage at the beginning of the project, which is then followed by the installation of concrete on site. This study recommends the application of the Earned Value method to facilitate monitoring, deviation identification, and optimization of coastal protection project performance. Further research can explore the integration of environmental risk factors and community participation in project performance analysis.
A ANALISIS CR, DAR, DER, NPM, ROA DAN ROE TERHADAP PERTUMBUHAN LABA PERIODE TRIWULAN DARI TAHUN 2016-2022 ((Studi Pada PT Telekomunikasi Indonesia Yang Terdaftar Di BEI)) Febrianti, Dian; Wuryanti, Lestari; Indriani, Wiewiek
Journal of Development Economics and Digitalization, Tourism Economics Vol. 1 No. 4 (2024): Oktober
Publisher : Yayasan Nuraini Ibrahim Mandiri

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.70248/jdedte.v1i4.1408

Abstract

Profit growth is an increase in company profits compared to previous period earnings Good company profit growth reflects that the condition of the company's performance is also good, if the economic conditions are good the company's growth is generally good. Because profit is a measure of the performance of a company, the higher the profit achieved by the company, indicates the better the company's performance, thus investors are interested in investing their capital. ZThe object in this study is PT Telekomunikasi Indonesia Tbk which is listed on the IDX for the Quarterly Period from 2016-2022. The sampling method in this study used nonprobabilin sampling with purposive sampling. The results of this study stated that partially the CR variable had a significant negative effect on profit growth, while the DAR, DER NPM, ROA and ROE variables partially had no effect on profit growth simultaneously with the CR variable. DAR DER NPM ROA and ROE affect profit growth at PT Telekomunikasi Indonesia Tbk which is listed on the IDX Quarterly period from 2016/2022
Pendampingan Pembuatan Vertical Garden Sebagai Upayah Peningkatan Green Building Concept Pada Gedung Sekolah SD IT Meulaboh Febrianti, Dian; Safriani, Meylis; Rafshanjani, M. Arie; Salena, Inseun Yuri
Jurnal Karya Abdi Masyarakat Vol. 5 No. 3 (2021): Jurnal Karya Abdi Masyarakat
Publisher : LPPM Universitas Jambi

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1503.775 KB) | DOI: 10.22437/jkam.v5i3.16279

Abstract

Penelitian mengenai green building dalam upayah meningkatkan kawasan hijau didaerah Kabupaten Aceh Barat mendapatkan respon yang baik dari pemerintah dan masyarakat. Dari Penelitaian ini dikembangkan dengan membuat Vertical Garden, sebagai implementasi konsep green building. Bentuk implementasi tersebut dibuat dalam bentuk kegiatan pengabdian Peningkatan Green Building Concept Melalui Penerapan Vertical Garden Pada Gedung Sekolah di Kabupaten Aceh Barat. Kegiatan pengabdian ini dilakukan pada salah satu sekolah terfavorit yang ada di Kabupaten Aceh Barat yaitu, sekolah SD IT Teuku Umar Meulaboh. Berdasarkan hasil survey sangat diperlukan penataan vegetasi pada dinding bangunan atau disebut vertical garden, agar bangunan menjadi dingin dan dapat mengurangi kebutuhan pendingin ruangan sebagai upayah untuk menciptakan iklim mikro yang memberikan kenyaman termal dan memperbaiki kualitas lingkungan bagi pengguna bangunan sekolah SD IT Meulaboh. Pembuatan Vertical Garden menggunakan tanaman lokal yang mudah didapat berupa tanaman daun sirih merah, dan daun teh merambat. Responyang diberikan dari mitra sangat positif dan antusias, dan dapat peningkatkan pemahaman bagi guru dan siswa tentang manfaat dan keuntungan dari penerapan konsep Green Building pada bangunan. Kegiatan pembuatan vertical garden ini merupakan salah satu cara untuk mengurangi dampak global warning, dan menambah ruang terbuka hijau yang dapat menyerap polusi udara sekaligus meningkatkan kualitas udara pada lingkungan sekolah
Sosialisasi Pengurangan Sampah Plastik dan Dampak Sampah Plastik Pada Siswa SMA 2 Darul Makmur Kabupaten Nagan Raya Safriani, Meslis; Febrianti, Dian; Farizal, Teuku; Rafshanjani, M. Arie; Salena, Inseun Yuri; Yusra, Andi; Zakia, Zakia
Jurnal Karya Abdi Masyarakat Vol. 6 No. 2 (2022): Jurnal Karya Abdi Masyarakat
Publisher : LPPM Universitas Jambi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22437/jkam.v6i2.22975

Abstract

Salah satu permasalahan yang sering kita hadapi saat ini dan menjadi isu permasalahan lingkungan adalah sampah bertebaran di berbagai tempat, terutama sampah anorganikyang tidak dapat terurai sangat bahaya bagi lingkungan. Pengelolaan sampah dimaksutkan agar tidak membahayakan kesehatan manusia dan tidak mencemari lingkungan. Pengelolaan sampah juga dilakukan untuk memperoleh manfaat atau keuntungan bagi manusia. Pengenalan bahaya sampah dan upaya pengurangan sampah dapat dilakukan melalui kegiatan sosialisasi, dari tingkat siswa SD, SMP, SMA, dan sosialisasi ke masyarakat melalui Desa. Melalui kegiatan pengabdian ini diharapkan dapat bermanfaat dengan melakukan upanya dalam mengurangi pemakaian sampah plastik dan pengelolaan kembali sampah plastik menjadi barang yang berguna. Pengenalan bahaya sampah dan upaya pengurangan sampah dapat diklakukan melalui kegiatan sosialisasi, dari tingkat siswa SD, SMP, SMA, dan sosialisasi ke masyarakat melalui Desa. Kegiatan pengabdian ini mengambil lokasi di SMA 2 Darul Makmur Kabupaten Nagan Raya agar memberi gambaran serta wawasan kepada siswa mengenai cara mengurangi sampah plastik serta dampak bahayanya pada lingkungan dan tindakan daur ulang sampah plastik dalam kehidupan sehari hari. Melalui kegiatan pangabdian ini diharapkan dapat bermanfaat dalam mengurangi pemakaian sampah plastik dan pengelolaan kembali sampah plastic menjadi barang yang berguna.
Prosedur Create Sales Order and Delivery Order Use System Application and Product in Data Processing (SAP) on PT. Central Proteina Prima Tbk Ekkiwinatha, Novan; Pratiwi, Annissa; Febrianti, Dian; Benazhier Fitrah, Bunga
Review of Accounting and Taxation Vol. 3 No. 2 (2024): December
Publisher : Review of Accounting and Taxation

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.61659/reaction.v3i2.197

Abstract

This study aims to explain the procedure for creating sales orders and delivery orders using the system application and product in data processing (SAP) application. The research design used in the preparation of this Final Project is a descriptive qualitative design, which is a research approach that focuses on natural phenomena or symptoms in the field. The data used in the preparation of this Final Project was obtained from direct interviews with related parties at PT Central Proteina Prima Tbk - Anyer Hatchery, and documentation / archives regarding the SAP application used by the company, especially in the create sales order and delivery order procedures. The results of the research conducted show that PT Central Proteina Prima Tbk - Anyer Hatchery has weaknesses in the authorization process in the Standard Operating Procedure (SOP) related to creating sales orders and delivery orders, especially in the CNPD division. But basically, the SAP system has strongly emphasized the importance of the distribution of authorizations as part of the internal control system (SPI) that must be carried out by the company. Therefore, the implementation of SPI and standard operating procedures (SOP) must be better implemented properly and correctly so that business continuity can run more optimally.