Articles
PENGARUH BUFFER SIZE PADA SISTEM MANET DENGAN MENGGUNAKAN METODE SCHEDULING FIFO
Enrico Andriyanto;
I.G.A.K Diafari Djuni H;
N.M.A.E.D. Wirastuti
Jurnal SPEKTRUM Vol 6 No 2 (2019): Jurnal SPEKTRUM
Publisher : Program Studi Teknik Elektro UNUD
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (115.511 KB)
|
DOI: 10.24843/SPEKTRUM.2019.v06.i02.p06
MANET or Mobile Ad Hoc Network is a technology in Ad Hoc network that is mobile and its own use is very wide because, nodes-nodes in this network is moving randomly so that the network topology is also always changing. Setting Buffer size with Scheduling method using FIFO can improve the quality of this network. This simulation uses OPNET Modeler 14.5 by comparing the effect of the Buffer Size value change. Buffer Size parameter values will be changed to 20000 bits, 30000 bits, and 40000 bits using 20 nodes. QoS of MANET performance is a method of measuring how good a network is and an attempt to define the characteristics and properties of a service. The results of this study can be seen the value of delay, packet loss and throughput have obtained the appropriate results and already meet ITU standards with the lowest delay value of 1.30 millisecond and the value of throughput with 258,096 bps.
ANALISIS UNJUK KERJA TEKNIK MIMO STBC PADA SISTEM ORTHOGONAL FREQUENCY DIVISION MULTIPLEXING
T.B. Purwanto;
N.M.A.E.D. Wirastuti;
I.G.A.K.D.D. Hartawan
Jurnal SPEKTRUM Vol 2 No 2 (2015): Jurnal SPEKTRUM
Publisher : Program Studi Teknik Elektro UNUD
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (388.341 KB)
Teknologi Orthogonal Frequency Division Multiplexing (OFDM) merupakan sebuah teknik transmisi yang menggunakan beberapa frekuensi (multi-carrier) yang saling orthogonal. Dimana sederet aliran data berkecepatan tinggi diubah menjadi beberapa deret data berkecepatan rendah. Untuk mengatasi gangguan multipath fading dan noise dapat diatasi dengan penggunaan teknik Multiple Input Multiple Output (MIMO). Teknik MIMO menggunakan sejumlah antena pengirim dan antena penerima.Penelitian ini bertujuan untuk mengetahui unjuk kerja dari sistem OFDM dan sistem MIMO-OFDM menggunakan teknik MIMO Space Time Block Code (STBC) OFDM. Dalam penelitian ini metode yang digunakan adalah simulasi menggunakan program MatLab. Hasil dari simulasi didapatkan unjuk kerja MIMO STBC OFDM lebih baik dari sistem OFDM. MIMO STBC OFDM pada kanal AWGN sudah tidak terjadi error saat Eb/No sebesar 12 dB dan pada kanal Rayleigh saat Eb/No sebesar 12 dB. Untuk mencapai BER sebesar 10-4 diperlukan Eb/No sebesar 9 dB pada kanal AWGN, dan pada kanal Rayleigh memerlukan Eb/No sebesar 10,5 dB.
RANCANG BANGUN APLIKASI FRONT OFFICE RESTORAN BERBASIS ANDROID DAN WEB SERVICE
Ida Bagus Darma Putra;
NMAED Wirastuti;
I Made Arsa Suyadnya
Jurnal SPEKTRUM Vol 1 No 1 (2014): Jurnal SPEKTRUM
Publisher : Program Studi Teknik Elektro UNUD
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (377.004 KB)
Sistem front office pada suatu restoran biasanya masih menerapkan sistem manual. Kebanyakan restoran menggunakan kertas nota sebagai pencatat menu makanan dan minuman yang dipesan oleh pelanggan. Rancang bangun sistem aplikasi front office restoran berbasis android dan web service akan mengkomputerisasi proses pelayanan manual pada restoran. Aplikasi restoran berbasis android (RestoAPPMobile) terhubung dengan sebuah aplikasi sistem informasi front office restoran berbasis web (RestoApp 1.0) melalui perantara web service. Aplikasi RestoAPPMobile akan mengakses data dari database RestoApp 1.0 dan menampilkan data menu serta data pesanan pada layar handphone android yang dibawa oleh pelayan. Data menu makanan dan minuman yang terdapat pada RestoApp 1.0 akan ditampilkan pada aplikasi RestoAPPMobile, begitu pula dengan data daftar pesanan pelanggan dan juga pembuatan pesanan baru. Perubahan data apapun pada RestoApp 1.0 akan menyesuaikan pula pada aplikasi RestoAPPMobile, begitu pula sebaliknya. Rancang bangun aplikasi front office restoran berbasis android dan web service ini difokuskan pada pelayan. Akses dari kasir dan dapur terdapat pada aplikasi RestoApp 1.0 di perangkat komputer.
RANCANG BANGUN APLIKASI PENDAFTARAN AKTA PPAT BERBASIS WEB DENGAN TEKNOLOGI QR CODE
T. Angrriawan;
IGAK Diafari Djuni H;
N.M.A.E.D Wirastuti
Jurnal SPEKTRUM Vol 1 No 1 (2014): Jurnal SPEKTRUM
Publisher : Program Studi Teknik Elektro UNUD
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (1382.95 KB)
Perkembangan ilmu pengetahuan dan teknologi telah mengalami percepatan yang tinggi. Keadaan tersebut membuat banyak hal dapat dilakukan dengan lebih mudah dan efisien. Seiring dengan hal tersebut kebutuhan akan informasi yang cepat dan akurat juga semakin tinggi. Dengan tujuan untuk menghasilkan penyajian informasi yang cepat, jelas, dan akurat sehingga dapat membantu proses pengambilan keputusan dalam proses verifikasi data.Metode dalam pembuatan aplikasi ini dibagi menjadi tiga bagian yaitu pertama, melakukan pengumpulan data Akta PPAT. Kedua, perancangan aplikasi pencetakan Akta PPAT, QR Code, dan pengecekan Akta. Ketiga, pembuatan aplikasi pendaftaran Akta QR Code PPAT menggunakan bahasa pemrograman PHP yang dapat dijalankan pada browser.Hasil dari pembuatan aplikasi berupa aplikasi pendaftaran Akta PPAT yang dapat menampilkan proses penginputan data para pihak, pengeditan data pada Akta PPAT, pencetakan Akta QR Code. Aplikasi dapat menampilkan hasil pengecekan Akta melalui scan QR Code pada aplikasi dalam bentuk teks file, dan melakukan validasi data pada hasil scan. Simpulan yang dapat ditarik adalah aplikasi dapat menampilkan hasil cetak Akta dan QR Code.
RANCANG BANGUN APLIKASI PENDATAAN WARGA BANJAR BERBASIS ANDROID
Anak Agung Kurnia Aditama;
I G.A.K. Diafari Djuni H.;
N.M.A.E.D. Wirastuti
Jurnal SPEKTRUM Vol 1 No 1 (2014): Jurnal SPEKTRUM
Publisher : Program Studi Teknik Elektro UNUD
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (1464.561 KB)
Dewasa ini smartphone dengan sistem operasi android sedang menjadi tren, khususnya pada bidang teknologi komunikasi. Adanya smartphone dengan sistem operasi android dapat digunakan untuk mendukung upaya pemerintah dalam melakukan pendataan penduduk, khususnya pendataan warga banjar. Saat ini petugas masih menggunakan cara manual dengan menggunakan form pendataan dari kertas. Sehingga munculah masalah yaitu bagaimana membuat suatu aplikasi mobile android dengan memanfaatkan kode QR yang dapat digunakan untuk mempermudah dalam melakukan pendataan warga banjar. Aplikasi ini dikembangkan menggunakan sebuah tools dari Google yaitu App Inventor, dengan tools ini pemrograman dapat dilakukan seperti bermain puzzle dimana seorang programmer melakukan pemrograman dengan cara menyatukan blok-blok program yang telah disediakan pada App Inventor. Dengan adanya App Inventor ini dapat dibuat sebuah aplikasi pendataan warga banjar dengan memanfaatkan kode QR sebagai media untuk memempermudah dalam proses pendataan sehingga pendataan warga banjar dapat dilakukan dengan lebih cepat dan efisien.
PERBAIKAN KONTRAS CITRA MENGGUNAKAN TEKNIK BRIGHTNESS ADJUSTMENT UNTUK SISTEM EKSTRAKSI GARIS PANTAI
I Made Rai Putera Yasa;
I Made Oka Widyantara;
NMAE Dewi Wirastuti
Jurnal SPEKTRUM Vol 4 No 2 (2017): Jurnal SPEKTRUM
Publisher : Program Studi Teknik Elektro UNUD
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (343.578 KB)
|
DOI: 10.24843/SPEKTRUM.2017.v04.i02.p06
This study has evaluated the application of brightness adjustment technique to improve image contrast in the framework of coastline extraction on video-based shoreline monitoring system. In this monitoring system, the shoreline detection mechanism is done by introducing the land and sea objects in the video image. Changes in sea conditions due to weather changes cause a change in the contrast in the coastal image. The change in contrast will lead to inaccurate coastline detection. The brightness adjustment technique is applied to the image pre-processing to produce stable contrast in all conditions so that the coastal monitoring system can extract the coastline accurately. The brightness adjustment technique can adjust the brightness of the coastal image by setting the upper and lower threshold values of each pixel intensity. This study used 3 (three) sample video test images taken on morning, noon and afternoon to obtain different video image characteristics. The simulation results show that the application of brightness adjustment technique can increase the accuracy of shoreline extraction when using the threshold value of each at -20% for morning image condition, -40% for daytime image condition, and -35% for afternoon image condition .
ANALISA KINERJA MIMO CDMA DENGAN SPREADING CODE YANG BERBEDA PADA KANAL FADING RAYLEIGH
Rezamal Ilham;
I.G.A.K. Diafari Djuni;
Ni Made Ary Esta Dewi Wirastuti
Jurnal SPEKTRUM Vol 3 No 2 (2016): Jurnal SPEKTRUM
Publisher : Program Studi Teknik Elektro UNUD
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (285.54 KB)
Perkembangan dunia telekomunikasi dan informasi kini semakin pesat seiring bertambahnya jumlah user. Kualitas performansi yang baik dibutuhkan dalam mengirim dan menerima data informasi. Saat ini yang sedang diimplementasikan yaitu CDMA (Code division Multiple Access) dengan menggunakan jumlah antena yang berbeda baik antena pengirim maupun penerima (2Tx2Rx) atau MIMO (Multiple Input Multiple output) dan dengan menggunakan kode penebar (Spreading Code) yang berbeda. Sehingga dapat meningkatkan kualitas unjuk kerja performansi data informasi. Penelitian ini dilakukan analisa unjuk kerja sistem SISO (Single Input Single Output) dan MIMO CDMA dengan membandingkan kode penebar yang berbeda pada kanal fading rayleigh, melalui simulasi program bantu software Matlab. Tolak ukur keberhasilan sistem diamati berdasarkan hubungan antara nilai BER (Bit Error rate) dengan SNR (Signal Noise to Ratio). Hasil simulasi unjuk kerja kode penebar Walsh pada sistem SISO dan MIMO CDMA dengan jumlah 1 user untuk spreading factor = 8 terjadi nilai perubahan signifikan ketika SNR mulai dari 4 dB nilai BER SISO sebesar 0.0507 dan nilai BER MIMO sebesar 0.0391. Sehingga pada SNR mulai dari 4 dB keatas kinerja MIMO CDMA lebih baik daripada SISO, ini diakibatkan terjadi penambahan antenna pada sisi penerima 2Tx dan 2Rx. Hasil simulasi dengan pengaruh kode penebar pada nilai spreading factor yg berbeda dalam sistem MIMO CDMA dengan jumlah 1 user yaitu kode penebar Walsh spreading factor = 4, 8, 16. Untuk kode Walsh Spreading Factor = 4, 8, 16 terjadi nilai perubahan signifikan ketika SNR mulai dari 9 dB keatas nilai BER = 0.0012, 0.0009, 0.0006. Spreading factor 16 lebih baik unjuk kerja dibandingkan spreading factor lainnya, karena semakin panjang nilai spreading factor maka kinerja sistem MIMO CDMA semakin baik.
ANALISIS INTERCARRIER INTERFERENCE (ICI) SISTEM OFDM-MIMO STBC PADA KANAL FREQUENCY SELECTIVE FADING
I Wayan Diki Andriasmika;
I.G.A.K. Diafari Djuni H;
N.M.A.E. Dewi Wirastuti
Jurnal SPEKTRUM Vol 6 No 1 (2019): Jurnal SPEKTRUM
Publisher : Program Studi Teknik Elektro UNUD
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (255.105 KB)
|
DOI: 10.24843/SPEKTRUM.2019.v06.i01.p13
Wireless telecommunications requires high-speed access. One technique used tooWireless telecommunications requires high-speed access. One technique used toovercome multipath fading is Ortoghonal Frequency Division Multiplexing (OFDM). Theweakness of OFDM occurs on the mobile channel due to time variations in the channel, givingrise to intercarrier interference (ICI). The aim of the study is to determine the effect ofnormalized carrier frequency offset on ICI and the effect of frequency selective fading tapchannel. The simulation results show the system performance in calculating the Eb / N0 5 dBvalue that the greater the normalized carrier frequency offset (?), the worse the signal. Thesimulation results show the OFDM-MIMO system performance in calculating the Eb / N0 5 dBvalue that the greater the tap on the channel the worse the signal.vercome multipath fading is Ortoghonal Frequency Division Multiplexing (OFDM). Theweakness of OFDM occurs on the mobile channel due to time variations in the channel, givingrise to intercarrier interference (ICI). The aim of the study is to determine the effect ofnormalized carrier frequency offset on ICI and the effect of frequency selective fading tapchannel. The simulation results show the system performance in calculating the Eb / N0 5 dBvalue that the greater the normalized carrier frequency offset (?), the worse the signal. Thesimulation results show the OFDM-MIMO system performance in calculating the Eb / N0 5 dBvalue that the greater the tap on the channel the worse the signal.
APLIKASI PRAKIRAAN CUACA WILAYAH BALI BERBASIS ANDROID
Pande Gede Wipradnyana;
I Made Arsa Suyadnya;
Ni Made Ary Esta Dewi Wirastuti
Jurnal SPEKTRUM Vol 5 No 2 (2018): Jurnal SPEKTRUM
Publisher : Program Studi Teknik Elektro UNUD
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (408.529 KB)
|
DOI: 10.24843/SPEKTRUM.2018.v05.i02.p02
Weather forecast information is very important for tourism in Indonesia, especially Bali as one of the main tourist destinations. That information must be easily accessible by the users, as one of them through a mobile phone. In this research developed an application to showing the city weather forecast information and area tourist weather forecast information in Bali through mobile devices based on android operating system. The data sourced from Indonesian Agency for Meteorological, Climatological and Geophysics (BMKG). Generally, the system is divided into two parts, such as the server and client (user). Admin created in the form of web server by using HTML, PHP and JavaScript that used for the management of weather forecast data and convert data from Indonesian Agency for Meteorological, Climatological and Geophysics (BMKG), while on the client side is an application based on adroid to access the weather forecast data. In the design of the application, the planning begins with the analysis of system requirements, the implementation of coding until testing applications. The result of this research is an application of the city weather forecast information and area tourist weather forecast information in Bali which can be displayed on the mobile devices based on android operating system. Based on the result of the application testing with black box method overall funcional application has been running well.
PROTOTIPE MONITORING SUHU RUANGAN DAN DETEKTOR GAS BOCOR BERBASIS APLIKASI BLYNK
Gede Sastra Utara;
N.M.A.E.D. Wirastuti;
Widyadi Setiawan
Jurnal SPEKTRUM Vol 7 No 2 (2020): Jurnal SPEKTRUM
Publisher : Program Studi Teknik Elektro UNUD
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (428.299 KB)
|
DOI: 10.24843/SPEKTRUM.2020.v07.i02.p1
In everyday life we often use the name LPG gas even as basic needs. However, in its use itcan pose a threat because of a large enough LPG gas. The occurrence of gas leaks when there areno people around the leak is very difficult to detect especially lethal substances contained in LPG gas.To reduce fires caused by LPG gas leaks, a monitoring system is needed to monitor if a leakoccurs.The prototype method for monitoring room temperature and gas detector leak using theArduino uno 328 mitrocontroller by connecting ESP8266 for wifi connection. ESP8266 will send datawhen the MQ2 sensor reads a gas leak, as well as changes in room temperature that is read by theDHT11 sensor by sending the sensor reading data to Arduino ATmega 328 first to be processed intothe response data of the device and data that will be displayed on the blynk application.The result ofthe achievement of this research is that the measurement of leaky gas using the MQ2 sensor canalready be displayed using the avo meter by obtaining the voltage results. Real gas leakagemeasurements in the field can be displayed on mobile phones through the Blynk application media.The leaked gas graph can be displayed in the Blynk application by getting the minimum andmaximum results. The ESP8266 module must be located in an area or location that has a Wi-finetwork in order to send notifications properly according to the instructions on Arduino ATmega 328.