Claim Missing Document
Check
Articles

BUILDING CLIMATE RESILIENCE: INNOVATIVE STRATEGIES BY INDONESIAN LOCAL GOVERNMENTS Situmorang, Marningot Tua Natalis; Djaya, Subhan; Astuti, Titin; Hermansyah, Muhammad; Sulistyo, Arif Budi
VISIONER : Jurnal Pemerintahan Daerah di Indonesia Vol 16 No 1 (2024): Visioner: Jurnal Pemerintahan Daerah di Indonesia
Publisher : Alqaprint Jatinangor

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.54783/jv.v16i1.1041

Abstract

Climate change is a global challenge that requires rapid and adaptive responses from various levels of government, including local governments. In Indonesia, the role of local governments in building climate resilience is increasingly crucial as the impacts of climate change are felt in various regions. However, bureaucratic barriers, resource constraints, and socio-economic dynamics often hinder the effectiveness of climate resilience strategies at the local level. This study aims to explore the role of local governments in building climate resilience through local policies, technological innovation, and community participation. This study was conducted using a qualitative approach, where data was collected from various sources such as research results and relevant previous studies. The collected data were then processed systematically to find findings that support the development of climate resilience strategies. The results of the study show that local governments have an important role in developing policies that are appropriate to local conditions to deal with climate change. Technological innovation and the development of disaster-resistant infrastructure are key to increasing climate resilience at the local level. Active community participation and community empowerment have also proven to be important factors in implementing effective climate resilience strategies. Bureaucratic barriers and resource constraints can be overcome through cross-regional collaboration that allows for the sharing of knowledge and best practices. Thus, climate resilience strategies at the local level must be based on synergy between government, communities, and the private sector to achieve sustainable and effective results.
PENGUATAN RESILIENSI IBU DALAM PENDIDIKAN DAN PENCEGAHAN STUNTING PADA ANAK DI WILAYAH KOTA SERANG Sulistyo, Arif Budi; Nurhidayanti, Nurhidayanti; Abadi, Ma'ulfi Kharis
Indonesian Community Service and Empowerment Journal (IComSE) Vol. 5 No. 1 (2024): Indonesian Community Service and Empowerment Journal (IComSE)
Publisher : Divisi Pengabdian dan Pemberdayaan Masyarakat (DP2M) UNIKOM

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.34010/icomse.v5i1.14204

Abstract

Pengabdian kepada masyarakat dilakukan secara rutin dalam rangka mewujudkan nila-nilai tri dharma Perguruan Tinggi. Pengabdian masyarakat ini dilakukan pada pemuda lingkungan Benggala yang berlokasi di kota Serang. Yayasan ini menghimpun warga yang kurang mampu untuk memberikan keterampilan supaya berguna dikemudian hari. Tujuan diadakannya pengabdian ini adalah untuk membantu meringankan beban kehidupan bermasyarakat, yakni seperti memberikan penyuluhan pentingnya peran ibu dalam pendidikan anak di rumah, pencegahan stunting sejak dalam kandungan, pembagian sembako dan juga pemberian pelatihan dasar mewarnai pada anak sekolah dasar dan pentingnya menjaga sanitasi lingkungan untuk kesehatan bersama. Pengabdian ini dilakukan dengan metode studi kasus kualitatif dengan pendekatan deskriptif. Dengan teknik pengumpulan data yakni observasi dan wawancara. Hasil observasi dan wawancara dengan mitra, tim memperoleh hasil dengan tujuan agar terlaksananya pengabdian masyarakat ini dengan lancar dan bermanfaat untuk masyarakat setempat. Pengabdian ini di dukung oleh tiga orang mahasiswa dari program studi teknik industri dengan mengkonversi kegiatan ke mata kuliah KKM. Pengabdian ini jug didukung oleh hibah Kementrian Riset dan Teknologi, Pendidikan dan Kebudayaan. Dengan harapan pengabdian kepada masyarakat terus berlanjut dan peningkatan kualitas sumber daya manusia meningkat.
OPTIMALISASI PENGENDALIAN KUALITAS PRODUK PALET KAYU MELALUI PENDEKATAN RCA & SPC Zakaria, Tatan; Juniarti, Anita Dyah; Ramdani, Denis Muhamad; Sulistyo, Arif Budi
Jurnal Intent: Jurnal Industri dan Teknologi Terpadu Vol 7 No 2 (2024): INDUSTRIAL
Publisher : Prodi Teknik Industri, Fakultas Teknik

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.47080/intent.v7i2.3880

Abstract

This study aims to optimize the quality control of wood pallet products at PT. Azdhi Kayu Kreasi by using the Root Cause Analysis (RCA) and Statistical Process Control (SPC) approaches. The problem faced by the company is the high level of product defects that can reduce customer satisfaction and increase production costs. The RCA method is used to identify the root cause of product defects, while SPC is used to monitor and control the production process. Data were collected through field observations, interviews, questionnaires, and internal company documentation. The data were analyzed using P charts, Pareto diagrams, and fishbone diagrams. The results showed that the main cause of product defects was wood cracking, which was caused by factors such as poor raw material quality, production process errors, and unsuitable environmental conditions. The implementation of RCA and SPC proved effective in identifying and reducing the causes of product defects. By making improvements to the production process and selecting better raw materials, the product defect rate can be significantly reduced. This research makes a practical contribution to the company in improving product quality and production process efficiency.
Analisa Beban Kerja Fisik dan Mental Dengan Metode CVL dan NASA TLX pada Departemen Maintenance di Perusahaan Otomotif Sulistyo, Arif Budi; Islahudin, Islahudin
Jurnal PASTI (Penelitian dan Aplikasi Sistem dan Teknik Industri) Vol 19, No 1 (2025): Jurnal PASTI
Publisher : Universitas Mercu Buana

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22441/pasti.2025.v19i1.003

Abstract

Penelitian ini bertujuan untuk mengevaluasi beban kerja fisik dan mental mekanik di departemen maintenance perusahaan otomotif yang menangani hingga 3.000 unit motor per bulan dengan 13 orang tenaga kerja. Beberapa mekanik mengalami ketidaknyamanan fisik, seperti nyeri punggung, sehingga diperlukan analisis tingkat beban kerja. Pengukuran beban kerja fisik dilakukan dengan metode Cardiovascular Load (CVL), sedangkan beban kerja mental dinilai menggunakan metode NASA-TLX yang berbasis persepsi subjektif pekerja. Hasil menunjukkan bahwa 7 dari 13 mekanik tergolong dalam kategori “diperlukan istirahat” menurut klasifikasi CVL, sementara 6 lainnya tidak menunjukkan tanda kelelahan fisik signifikan. Dari sisi mental, 8 mekanik berada pada kategori beban sedang dan 5 mekanik pada kategori rendah, dengan rata-rata skor di bawah 80%, menunjukkan bahwa beban mental tidak menjadi masalah utama. Disarankan adanya edukasi mengenai gaya hidup sehat, istirahat yang cukup, serta penyediaan fasilitas penunjang seperti program kebugaran di tempat kerja. Upaya ini bertujuan untuk mengurangi kelelahan fisik dan meningkatkan produktivitas kerja.
Maintenance Analysis of Multi Mover M600U by Using Reliability Centred Maintenance Method Sulistyo, Arif Budi; Saputra, Aji Eka
JURNAL Al-AZHAR INDONESIA SERI SAINS DAN TEKNOLOGI Vol 10, No 3 (2025): InPress
Publisher : Universitas Al Azhar Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36722/sst.v10i3.4036

Abstract

PT XYZ is a manufacturing company that provides hot metal transportation handling services and supports Blast Furnace (BF) operations at the Krakatau Posco Plant using heavy equipment, namely Multi Mover M600U. To ensure smooth production processes, effective and efficient maintenance management of the heavy equipment are essential to enhance reliability. This study evaluates potential failure modes, their impacts and appropriate handling measures for the Multi Mover M600U using the Failure Mode and Effect Analysis (FMEA) method. The result of the study shows the highest Risk Priority Number (RPN) value of 350 in the Electrical PLC component, with a total RPN of 777 for the Electrical and Brake systems. These findings indicate that the Electrical and Brake systems have the highest failure rates due to downtime compared to other systems. Through the Reliability Centred Maintenance (RCM) approach, this study proposes a maintenance scheduling plan to minimize the risk of sudden downtimes, and their impacts on time and maintenance costs.Keywords - Downtime, Failure Mode and Effect Analysis, Heavy Equipment Maintenance, Reliability Centred Maintenance, Risk Priority Number.
Developing an Industry-Specific Lean 4.0 Readiness Assessment Tool: A Case for the Chemical Sector Arif Budi Sulistyo; Putu Dana Karningsih; Samira Alvandi
Jurnal Optimasi Sistem Industri Vol. 23 No. 2 (2024): Published in January 2025 (published late, please read our note)
Publisher : The Industrial Engineering Department of Engineering Faculty at Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (955.682 KB) | DOI: 10.25077/josi.v23.n2.p283-298.2024

Abstract

In an era where digital transformation is increasingly imperative, many industries struggle to navigate the complexities of technological adoption and operational efficiency. Lean principles, which emphasize waste reduction and process optimization, provide a robust foundation for digital transformation, particularly in the chemical industry, where unique operational challenges exist. This research aims to develop an integrated Lean 4.0 readiness assessment tool to bridge the gap between leanness and Industry 4.0 readiness. The study begins with a literature review on existing lean and Industry 4.0 readiness measurement tools and integrates them to create a new framework, using the Indonesia Industry 4.0 Readiness Index (INDI 4.0) as a reference, tailored specifically to the chemical industry. Expert interviews are conducted to refine the assessment tool, ensuring alignment with real-world industry conditions and practical insights. A Delphi-based expert consensus method combined with a fuzzy approach for handling imprecision in indicator ratings is employed to validate the framework, resulting in five key dimensions and 86 indicators. By gathering expert input, the tool addresses the chemical industry’s specific challenges and simplifies readiness evaluation, helping companies assess their preparedness for digital transformation and identify areas for improvement. The resulting framework enables chemical companies to bridge readiness gaps and prioritize targeted enhancements. Furthermore, this tool has the potential to serve as a scalable model for other industries, fostering more efficient and strategic digital transformation aligned with Industry 4.0 objectives globally.
Analytical Hierarchy Process pada Pemilihan Pemasok Mata Gerinda Flap Disk 100 Arif Budi Sulistyo; Anita Dyah Juniarti; Imron Rosyadi
Journal of Industrial View Vol. 6 No. 2 (2024)
Publisher : Universitas Merdeka Malang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26905/jiv.v6i2.12387

Abstract

AbstractPT Teknik Manunggal Perkasa is a company operating in the fields of general contractor and supplier (welding equipment, safety equipment, pipe fitting, and flange). The company need sustainable or permanent suppliers to guarantee availability of goods, on-time delivery, appropriate quality, and price certainty. Recently, the company does not have a permanent supplier for spare parts of 100-flap disc grinding wheel. The aim of this research is determining order of factors to consider supplier selection and choose the best supplier for the grinding wheel. This research uses the Analytical Hierarchy Process (AHP) method. The data collection technique is using questionnaire about criteria, sub-criteria, and alternative suppliers from various divisions that are directly related to purchasing process. The results of research shows that the most influential criteria in selecting a grinding wheel supplier are quality criteria with weighting 0,376; followed by the price criterion with weighting 0,355; quantity accuracy with weighting 0,113; delivery with a weighting 0,097; and finally service criteria with weighting of 0,059. Meanwhile, the best supplier is PT ST, shows highest weighting 0,419; following by PT JM with weighting 0,215; PT SM with weighting 0,202; and the last rank is PT CJ with weighting 0,164.AbstrakPT Teknik Manunggal Perkasa adalah perusahaan yang bergerak di bidang general contractor dan supplier (welding equipment, safety equipment, pipe fitting and flange). Perusahaan sangat memerlukan pemasok barang yang continue atau tetap untuk menjamin ketersediaan barang, ketepatan waktu pengiriman, kualitas yang sesuai dan kepastian harga. Saat ini perusahaan belum memiliki pemasok tetap untuk spare part mata gerinda flap disk 100. Penelitian ini bertujuanh untuk menentukan urutan faktor yang mempengaruhi pemilihan pemasok dan memilih pemasok terbaik untuk mata gerinda tersebut dengan menggunakan metode Analytical Hierarchy Process (AHP). Teknik pengumpulan data menggunakan kuesioner mengenai kriteria, sub kriteria dan alternatif pemasok dari berbagai divisi yang berhubungan langsung pada proses pembelian. Hasil dari penelitian ini menunjukkan bahwa kriteria yang paling berpengaruh dalam pemilihan pemasok mata gerinda adalah kriteria kualitas dengan bobot 0,376; kemudian diikuti oleh kriteria harga dengan bobot 0,355; ketepatan jumlah dengan bobot 0,113; pengiriman dengan bobot 0,097 dan terakhir adalah kriteria pelayanan dengan bobot 0,059. Sedangkan pemasok terbaik adalah PT ST dengan bobot paling tinggi yaitu 0,419; selanjutnya. PT JM dengan bobot 0,215; PT SM dengan bobot 0,202 dan peringkat terakhir adalah PT CJ dengan bobot 0,164.
Optimasi Pemakaian Steam pada Proses Refinery CPO dengan Pendekatan TPM Focus Improvement Arif Budi Sulistyo; Hartadi Wijaya; Nur Hidayanti; Fikri Fadhilah
Journal of Industrial View Vol. 7 No. 2 (2025)
Publisher : Universitas Merdeka Malang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26905/jiv.v7i2.16064

Abstract

PT. MNA is a partner in the palm oil processing industry and its derivatives, primarily aimed at producing cooking oil. The refinery process of Crude Palm Oil (CPO) is one of the production stages that requires high energy consumption, particularly in the form of steam. This study aims to identify the level of steam usage in the refinery process and to explore opportunities for optimization and energy savings. The methods used include the Kaizen approach and Total Productive Maintenance (TPM). Initial analysis showed that steam consumption at PT. MNA reached 204,000 kg per month, with the highest usage occurring in the steam drying SBE process (82.97%), followed by steam heating PHE (10.82%), and steam heating hot water (6.21%). Based on a Pareto analysis, the improvement focus was placed on the steam drying SBE process. The implementation of improvements through reducing process time from 850 seconds to 700 seconds proved effective without disrupting other processes. As a result, steam consumption was successfully reduced to 168,000 kg per month, while the oil content in SBE remained within the company’s target of 20–22%. Therefore, the TPM Focus Improvement and Kaizen approaches have been proven effective in optimizing steam usage in the CPO refinery process.    PT. MNA sebagai mitra bidang pengolahan minyak kelapa sawit dan turunannya untuk menghasilkan minyak goreng. Proses refinery Crude Palm Oil (CPO) merupakan salah satu tahapan produksi yang memerlukan konsumsi energi dalam jumlah besar, terutama dalam bentuk steam. Penelitian ini bertujuan untuk mengetahui tingkat penggunaan steam pada proses refinery serta mengidentifikasi peluang optimasi dan penghematan energi. Metode yang digunakan meliputi pendekatan Kaizen dan TPM (Total Productive Maintenance). Hasil analisis awal menunjukkan bahwa konsumsi steam di PT. MNA mencapai 204.000 kg per bulan, dengan penggunaan terbesar terdapat pada proses steam drying SBE sebesar 82,97%, disusul steam heating PHE sebesar 10,82% dan steam heating hotwater sebesar 6,21%. Berdasarkan analisis Pareto, fokus perbaikan difokuskan pada proses steam drying SBE. Implementasi perbaikan dengan pengurangan waktu proses dari 850 detik menjadi 700 detik terbukti efektif tanpa mengganggu proses lainnya. Hasilnya, konsumsi steam berhasil dikurangi menjadi 168.000 kg per bulan, serta kadar oil content pada SBE tetap berada dalam target perusahaan yaitu 20–22%. Dengan demikian, pendekatan TPM Focus Improvement dan Kaizen terbukti efektif dalam mengoptimalkan pemakaian steam pada proses refinery CPO.
Analisa Pengaruh Kualitas Batubara Terhadap Efisiensi Boiler Menggunakan Metode Statistical Process Control di Pembangkit Listrik Tenaga Uap Arif Budi Sulistyo; Nuraisah Nuraisah
Jurnal PASTI (Penelitian dan Aplikasi Sistem dan Teknik Industri) Vol 19, No 3 (2025): Jurnal PASTI
Publisher : Universitas Mercu Buana

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22441/pasti.2025.v19i3.005

Abstract

Penelitian ini bertujuan untuk menganalisis pengaruh kualitas batubara terhadap efisiensi pembakaran pada Boiler Unit 4 Pembangkit Listrik Tenaga Uap serta mengevaluasi strategi pencampuran batubara dari berbagai pemasok. Parameter kualitas yang diamati meliputi kadar air total, kadar air inherent, kadar abu, zat terbang, karbon tetap, total sulfur, dan nilai kalor. Variasi kualitas batubara diidentifikasi menggunakan metode Statistical Process Control untuk mengetahui keterkaitannya dengan kinerja boiler. Hasil penelitian menunjukkan bahwa kadar air total, total sulfur, dan nilai kalor merupakan faktor yang paling memengaruhi efisiensi, dengan rata-rata efisiensi aktual hanya 83,96%. Simulasi pencampuran batubara dengan proporsi pemasok tertentu dapat meningkatkan efisiensi hingga 88,00% dengan tetap memenuhi spesifikasi kualitas. Analisis lebih lanjut menggunakan pendekatan 5W+1H mengungkap faktor penyebab lain yang berasal dari aspek manusia, mesin, material, metode, dan lingkungan. Penelitian ini menyimpulkan bahwa pencampuran batubara efektif untuk meningkatkan efisiensi, yaitu dari 3 supplier dengan proporsi masing-masing 30%, 40%, dan 30% namun perlu didukung pemilihan pemasok dengan kualitas lebih baik dan pengendalian mutu yang ketat. Usulan perbaikan yang diberikan adalah pembuatan standar operasional mengenai strategi blending, mengembangkan progam pelatihan bagi operator dalam menghadapi variasi kualitas batu bara, dan investasi infrastruktur penyimpanan tertutup batu bara agar kualitasnya lebih terjaga.
Analisis Pengaruh Kualitas Batubara terhadap Efisiensi Boiler Menggunakan Metode Statistical Process Control di Pembangkit Listrik Tenaga Uap Arif Budi Sulistyo; Nuraisah Nuraisah
Jurnal PASTI (Penelitian dan Aplikasi Sistem dan Teknik Industri) Vol. 19 No. 3 (2025): Jurnal PASTI
Publisher : Universitas Mercu Buana

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22441/pasti.2025.v19i3.005

Abstract

This study aims to analyze the effect of coal quality on the combustion efficiency of Boiler Unit 4 at coal-fired power plant and to evaluate blending strategies of coal from multiple suppliers. The observed quality parameters include total moisture, inherent moisture, ash content, volatile matter, fixed carbon, total Sulphur, and calorific value. Variations in coal quality were identified using Statistical Process Control to determine their impact on boiler performance. The results indicate that total moisture, total Sulphur, and calorific value are the most influential factors, with an average efficiency of only 83.96%. A blending simulation with specific supplier proportions successfully increased efficiency to 88.00% while still meeting the quality specifications. Further analysis using the 5W+1H approach revealed additional contributing factors related to human, machine, material, method, and environmental aspects. The study concludes that coal blending is effective in improving efficiency, but it should be supported by selecting higher-quality of 3 suppliers with proportion 30%, 40% and 30% respectively and enforcing quality control strictly. The proposed improvements are creation of operational standards for blending strategies, development of training programs for operators to handle variations in coal quality, and investment in closed coal storage to better maintain its quality.